Bimetallic Cu–Pt/nanoporous carbon composite as an efficient catalyst for methanol oxidation

A novel bimetallic Cu–Pt nanoparticle supported onto Cu/indirectly carbonized nanoporous carbon composite (Cu–Pt/ICNPCC) was prepared through a two-step process: first, carbonization of furfuryl alcohol-infiltrated MOF-199 [metal–organic framework Cu₃(BTC)₂ (BTC?=?1,3,5-benzene tricarboxylate)], without removing the Cu metal with HF aqueous solution; second, the partial galvanic replacement reaction (GRR) of Cu nanoparticles by Pt^IV upon immersion in a platinum(IV) chloride solution. The synthesized materials characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDS), and electrochemical methods. The EDS result revealed that part of Cu nanoparticles have been substituted by Pt nanoparticles after GRR. The methanol oxidation at the surface of Cu–Pt/ICNPCC was investigated by cyclic voltammetry method in 0.5 M H₂SO₄ and indicated good electro-catalytic activity towards methanol oxidation (E_p?=?0.85 V vs. NHE and j_f?=?1.00 mA cm^?2). It is suggested that this improvement is attributed to the effect of proper Cu/ICNPCC for fine dispersion, efficient adhesion, and prevention of Pt coalescing.     

Palladium tetrazole–supported complex as an efficient catalyst for the Heck reaction

Abstract  

A tetrazole-supported polymeric ligand has been synthesized. The palladium complex derived from the polymeric material has been evaluated as a catalyst for the Heck reaction of aryl iodides and bromides with styrene to provide the corresponding products in high yields. The reaction proceeded smoothly in the presence of 1 mol% with respect to Pd of catalyst in DMF at 125 or 140 °C within 1–3 h. Recycling studies showed that the catalyst can be readily recovered and reused for several times without significant loss of catalytic activity.     

Exciting lattice oxygen of nickel–iron bi-metal alkoxide for efficient electrochemical oxygen evolution reaction

High efficiency, cost-effective and durable electrocatalysts are of pivotal importance in energy conversion and storage systems. The electro-oxidation of water to oxygen plays a crucial role in such energy conversion technologies. Herein, we report a robust method for the synthesis of a bimetallic alkoxide for efficient oxygen evolution reaction(OER) for alkaline electrolysis, which yields current density of 10 mA cm^-2 at an overpotential of 215 mV in 0.1 M KOH electrolyte. The cataly...     

Metal-organic-framework-derived formation of Co–N-doped carbon materials for efficient oxygen reduction reaction

Non-precious metal nitrogen-doped carbonaceous materials have attracted tremendous attention in the field of electrochemical energy storage and conversion. Herein, we report the designed synthesis of a novel series of Co-N-C nanocomposites and their evaluation of electrochemical properties. Novel yolkshell structured Co nanoparticles@polymer materials are fabricated from the facile coating polymer strategy on the surface of ZIF-67. After calcination in nitrogen atmosphere, the Co–N–C nanocomposites in which cobalt metal nanoparticles are embedded in the highly porous and graphitic carbon matrix are successfully achieved. The cobalt nanoparticles containing cobalt metal crystallites with an oxidized shell and/or smaller(or amorphous) cobalt-oxide deposits appear on the surface of graphitic carbons. The prepared Co–N–C nanoparticles showed favorable electrocatalytic activity for oxygen reduction reactions,which is attributed to its high graphitic degree, large surface area and the large amount existence of Co–N active sites.     

Hierarchical NiCo2O4 nanorods as an efficient cathode catalyst for rechargeable non-aqueous Li–O2 batteries

NiCo₂O₄ nanorods were synthesized by a hydrothermal method followed by low temperature calcination. FESEM and TEM analyses confirmed that the as-prepared materials consist of a hierarchical nanorod structure. When applied as cathode catalysts in rechargeable Li–O₂ batteries, NiCo₂O₄ nanorods exhibited a superior catalytic activity, including low charge over-potential, high discharge capacity and high-rate capability.     

CeCl_3·7H_2O as an efficient catalyst for one-pot synthesis of β-amino ketones by three-component Mannich reaction

<正>Cerium trichloride heptahydrate(CeCl_3·7H_2O) was found to be an efficient and recyclable catalyst for the three-component direct Mannich reaction of anilines and benzaldehydes with acetophenone.This protocol has advantages of high yield,no environmental pollution,mild condition,and simple work-up procedure.     

A new MnxOy/carbon nanorods derived from bimetallic Zn/Mn metal–organic framework as an efficient oxygen reduction reaction electrocatalyst for alkaline Zn-Air batteries

Journal of Solid State Electrochemistry - In this work, nanorods like bimetallic Zn/Mn metal–organic-frameworks (MOFs) are proposed as the precursor for preparing MnxOy/porous carbon...     

Pd–Co alloy as an efficient recyclable catalyst for the reduction of hazardous 4-nitrophenol

Research on Chemical Intermediates - Palladium–Cobalt (Pd–Co) alloys with different atomic ratios were synthesized successfully by borohydride-assisted chemical reduction method....     

Porous carbon coupled with an interlaced MoP–MoS2 heterojunction hybrid for efficient hydrogen evolution reaction

The design and development of electrocatalysts composed of non-noble-metal catalysts with both large surface area and high electrical conductivities are crucial for the hydrogen evolution reaction(HER).Here,a xylose-based porous carbon is coupled with a MoS2-Mo P heterojunction(MoS2-Mo P/FPC)hybrid and used as a promising catalyst for HER.The hybrid is prepared by immobilizing petal-like MoS2 nanosheets on porous carbon(MoS2/FPC),followed by controlling the phosphidation in Ar/H2 to form MoS2-Mo P/FPC.Red phosphorus provides the P species that can induce the construction of the heterojunction under the reducing atmosphere,along with the generation of a Mo P phase and the splitting of the MoS2 phase.The as-prepared MoS2-Mo P/FPC catalyst offers a low overpotential of 144 mV at a current density of 10 m A cm^-2 and a small Tafel slope of 41 m V dec^-1 for the HER in acidic media,as well as remarkable stability.Apart from the active nature of the hybrid,its outstanding activity is attributed to the MoS2-Mo P heterojunction,and the good charge/mass-transfer ability of porous carbon.This strategy provides a new method to develop and design low-cost and high-performance catalysts for the HER.     

Superparamagnetic iron oxide as an efficient catalyst for the one-pot, solvent-free synthesis of α-aminonitriles

Superparamagnetic Fe₃O₄ is shown to act as a very efficient catalyst for the one-pot, three-component synthesis of α-aminonitriles from aldehydes, amines, and TMSCN. The catalyst is easily recovered by the use of an external magnet and reused in several reactions without any noticeable loss of activity. The products are obtained rapidly at room temperature in good purity upon separation of the catalyst and evaporation of the volatiles of the reaction mixture.     

Tris(hydroxymethyl)aminomethane as an efficient organobase catalyst for the synthesis of β-phosphonomalonates

Tris(hydroxymethyl)aminomethane (THAM) is a highly efficient and recyclable organobase catalyst for the nucleophilic phosphonylation of benzylidene malononitrile under solvent-free conditions. This new catalytic methodology is applicable without a solvent, eco-friendly, economically viable, avoids conventional isolation procedures, and has a facile work-up procedure and wide scope. THAM is an inexpensive, commercially available, non-toxic, and biodegradable novel organocatalyst. Furthermore, it can be reused in up to five cycles without loss in catalytic activity, and no chromatographic separation is needed to obtain the desired products.     

Urchin-like double-shelled Pd–PdO/ZnO hollow sphere as an efficient catalyst for the Suzuki-Miyaura reaction

In recent years, the modi?cation of metal oxides with noble metals to decrease the loading amount of expense of noble metal catalyst and amend the stability of nanocatalyst in chemical reactions has attracted signi?cant attention. Here in this study, the urchin-like double-shelled Pd–PdO/ZnO hollow sphere is successfully prepared by using a simple hydrothermal method and carbon sphere as a hard template. The structure of the catalyst was confirmed by using field-emission scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, energy-dispersive X-ray spectroscope, and BET. The total amount of palladium particles on ZnO was determined by induced coupled plasma analysis. The prepared catalyst gave high catalytic activity for the Suzuki reaction of aryl halides to afford biphenyls under milder conditions. Furthermore, the stability and reusability of catalyst were investigated, and all of the data proved that urchin-like double-shelled Pd–PdO/ZnO hollow sphere could be recycled five times without marked loss of activity.     

Palladiumimmobilized on chitosan nanofibers cross-linked by glutaraldehyde as an efficient catalyst for the Mizoroki–Heck reaction

Nonwoven chitosan (CS) nanofiber mats were successfully prepared by the electrospinning of the mixture of CS and poly(ethylene oxide) (PEO) in acetic acid aqueous solution. The CS/PEO fiber mats were treated with glutaraldehyde aqueous solution to stabilize fibers in solution. The concentration of glutaraldehyde is important for incorporating swelling properties in the cross-linked CS/PEO fiber mats. The cross-linked CS/PEO fibers (CCS/PEO fibers) were then used as supports for palladium catalysts in the Mizoroki–Heck reaction. The results of the study demonstrated that the catalytic activities of Pd catalyst supported on CCS/PEO fiber (Pd-CCS/PEO fiber) were highly dependent on the concentration of glutaraldehyde in the cross-linking process. Density functional theory (DFT) calculations indicated that the Schiff bond formed between CS and glutaraldehyde could reduce the energy needed to form a chelate complex between the CCS/PEO fibers and palladium active species. This in turn could decrease the activation energy of the Mizoroki–Heck reactions which occur in the presence of the Pd-CCS/PEO fiber catalysts. The optimized Pd-CCS/PEO fiber catalyst was very efficient and stable in the Mizoroki–Heck reaction of aromatic iodides with olefins.     

Iridium–nickel composite oxide catalysts for oxygen evolution reaction in acidic water electrolysis

A series of Ir_1–xNi_xO_2–y (0 ≤ x ≤ 0.5) composite oxides have been prepared by a simple pyrolysis method in ethanol system and used as the electrocatalysts for OER in acidic medium. The materials have been characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF) and scanning electron microscopy (SEM). The electrochemical performances of these Ir_1–xNi_xO_2–y composite catalysts are evaluated by cyclic voltammetry (CV) and steady-state measurements. The resulting oxides with the Ni content (x) less than 0.3 have a complex nature of metal Ir and rutile structure IrO₂ which is similar to the Ir oxide prepared by the same approach and possess the contracted lattice resulted from the Ni-doping. Although the addition of Ni reduces the electroactive surface areas due to the coalescence of particles, the catalytic activity of the Ir_1–xNi_xO_2–y (0 < x ≤ 0.3) catalysts is slightly higher than that of the pyrolyzed Ir oxide. Regardless of the surface area difference, the intrinsic activity first increases and then decreases with the Ni content in Ir_1–xNi_xO_2–y catalysts, and the intrinsic activity of Ir_0.7Ni_0.3O_2–y catalyst is about 1.4 times of the Ni-free Ir oxide mainly attributed to the enhancement of conductivity and a change of the binding energy as increasing amount of the incorporated Ni with respect to the pure IrO₂. The Ir_0.7Ni_0.3O_2–y catalyst shows a prospect of iridium-nickel oxide materials in reducing the demand of the expensive Ir oxide catalyst for OER in acidic water electrolysis.     

Synthesis of efficient Vulcan–LaMnO3 perovskite nanocomposite for the oxygen reduction reaction

In situ autocombustion has been developed as a novel and efficient route for the synthesis of perovskite–carbon nanocomposites for the oxygen reduction reaction (ORR) in alkaline media. We demonstrate the synthesis of crystalline LaMnO_3 + δ perovskite–Vulcan composite with a high accessibility of active sites and high electronic conductivity required for efficient electrocatalysis. The rotating disc electrode measurements evidenced an excellent activity of the composite for the ORR.     

Nanocrystalline 5 % Fe/ZnO as an efficient catalyst for quinoxaline synthesis

Various 2-aryl quanoxalines were synthesized with good yields from o-phenylene diamines and phenacyl bromides in one pot using novel nanocrystalline 5 % Fe/ZnO catalyst, at room temperature. The salient feature of this method includes mild reaction conditions, short reaction time, good yield, high purity of product, and recyclable catalyst without noticeable decrease in catalytic activity, which can be used for large-scale synthesis. The synthesized 5 % Fe/ZnO nanoparticles were characterized by using XRD, SEM, and TEM techniques.     

Aza-Michael reaction as an efficient method for the synthesis of first representatives of β-azahetaryl-β-diphenylphosphorylalkanones

Aza-Michael reaction of (E)-4-(diphenylphosphoryl)but-3-en-2-one (1) with a number of mono-and bicyclic nitrogen heterocycles proceeds regioselectively in the absence of catalysts with the formation of corresponding β-azahetaryl β-diphenylphosphoryl ketones; in the case of imidazole, the presence of chiral organic catalysts allows one to increase the yields of the adducts and to obtain them in enantiomerically enriched form.

     

Studies of Nano-sized Co_3O_4 as Anode Materials for Lithium-ion Batteries

Introduction　　Thelargecapacityandhighcellvoltageoflithium basedcells ,coupledwiththeirrelativelylowenvironmen talimpactmakethemanidealcandidateforportablepowersupplies .Studyonpresentmaterialsforlithiumionbatter iesfocusesonimprovingcycleabilityandincreasingca pacityofelectrodematerials.Asoneoftheimportantpartsoflithium ionbatteries ,anodematerialshavebeeninvestigatedintensively .Now ,carbonaceousmaterialsareusedinnearlyalllithiumionbatteriesbecauseoftheirhighcapacity (theoreticalcapaci tyof…