Highly stable asymmetric supercapacitors based on Ni(OH)<Subscript>2</Subscript> deposited on electro-etched carbon paper

Herein, we introduce the application of nickel hydroxide nanosheets on the electro-etched carbon fiber (ECF) formed via a direct electrodeposition, for fabrication of asymmetric supercapacitor. To confirm the practical applicability of prepared Ni(OH)₂–ECF, an asymmetric device was assembled using Ni(OH)₂–ECF in combination with an activated carbon (AC) electrode. Our results showed a substantial cycling stability (96% capacitance retention after 10000 cycles) and considerable rate capability at large discharge currents (60% capacitance retention at 8 A g^??1) for this asymmetric supercapacitor that may have originated from the good contact between Ni(OH)₂ and ECF. A maximum specific capacitance of 88.1 F g^??1 was achieved for Ni(OH)₂–ECF//AC/CF device and showed considerable rate capability at large discharge currents (60% capacitance retention at 8 A g^??1). The results of this study suggest the Ni(OH)₂–ECF electrode is an excellent material for fabrication of supercapacitor electrodes.     

氮掺杂石墨烯量子点/MOF衍生多孔碳纳米片构筑高性能超级电容器

首先采用溶液法在碳布上生长Co-MOF二维纳米片,通过高温退火和刻蚀后得到MOF衍生多孔碳纳米片。以Co-MOF衍生的多孔碳纳米片/碳布(CNS/CC)作为碳基骨架,采用电化学沉积法负载高活性氮掺杂石墨烯量子点(N-GQDs),制备得到分级多孔结构的N-GQD/CNS/CC复合材料。组装成自支撑且无粘结剂的N-GQD/CNS/CC电极,当电流密度为1 A·g~(-1)时,其比电容高达423 F·g~(-1)。通过储能机制和电容贡献机制的研究表明,在碳纤维上原位生长的具有高双电层电容的CNS和表面负载具有高赝电容的N-GQDs之间相互协同作用,使得N-GQD/CNS/CC电极具有高电容性能,是一种理想的超级电容器电极材料。电极材料的高导电、分级多孔结构有利于电子的传输和电解质离子的扩散,具有良好的动力学性能,能快速充放电和具有优异的倍率特性。将电极组装成对称型超级电容器,功率密度为250 W·kg~(-1)时对应的能量密度达到7.9 Wh·kg~(-1),且经过10 000次循环后电容保持率为91.2%,说明氮掺杂石墨烯量子点/MOF衍生多孔碳纳米片复合材料是一种电化学性能稳定的具有高电容性能的全碳电极材料。     

Supercapacitors based on self-assembled graphene organogel

Self-assembled graphene organogel (SGO) with 3-dimensional (3D) macrostructure was prepared by solvothermal reduction of a graphene oxide (GO) dispersion in propylene carbonate (PC). This SGO was used as an electrode material for fabricating supercapacitors with a PC electrolyte. The supercapacitor can be operated in a wide voltage range of 0-3 V and exhibits a high specific capacitance of 140 F g(-1) at a discharge current density of 1 A g(-1). Furthermore, it can still keep a specific capacitance of 90 F g(-1) at a high current density of 30 A g(-1). The maximum energy density of the SGO based supercapacitor was tested to be 43.5 Wh kg(-1), and this value is higher than those of the graphene based supercapacitors with aqueous or PC electrolytes reported previously. Furthermore, at a high discharge current density of 30 A g(-1), the energy and power densities of the supercapacitor were measured to be 15.4 Wh kg(-1) and 16,300 W kg(-1), respectively. These results indicate that the supercapacitor has a high specific capacitance and power density, and excellent rate capability.     

Facile synthesis of high electrical conductive CoP via solid-state synthetic routes for supercapacitors

Co-P precursor was prepared by a mechanical alloying method and then is controlled to synthesis of Co P phase through an annealing method. The optimal conditions of ball milling and annealing temperature are investigated. The Co P exhibits higher electrical conductivity than graphite and cobalt oxide, showing excellent pseudocapacitive properties due its high electrical conductivity which can result in a fast electron transfer in high rate charge–discharge possess. The as-obtained Co P electrode achieves a high specific capacitance of 447.5 F/g at 1 A/g, and displays an excellent rate capability as well as good cycling stability. Besides, the asymmetric supercapacitor(ASC) based on the Co P as the positive electrode and activated carbon(AC) as the negative electrode was assembled and displayed a high rate capability(60%of the capacitance is retained when the current density increased from 1 A/g to 12 A/g), excellent cycling stability(96.7% of the initial capacitance is retained after 5000 cycles), and a superior specific energy of19 Wh/kg at a power density of 350.8 W/kg. The results suggest that the Co P electrode materials have a great potential for developing high-performance electrochemical energy storage devices.     

MnO2 Nanosheets Grown on Nitrogen‐Doped Hollow Carbon Shells as a High‐Performance Electrode for Asymmetric Supercapacitors

A hierarchical hollow hybrid composite, namely, MnO₂ nanosheets grown on nitrogen‐doped hollow carbon shells (NHCSs@MnO₂), was synthesized by a facile in situ growth process followed by calcination. The composite has a high surface area (251 m²g^?1) and mesopores (4.5 nm in diameter), which can efficiently facilitate transport during electrochemical cycling. Owing to the synergistic effect of NHCSs and MnO₂, the composite shows a high specific capacitance of 306 F g^?1, good rate capability, and an excellent cycling stability of 95.2 % after 5000 cycles at a high current density of 8 A g^?1. More importantly, an asymmetric supercapacitor (ASC) assembled by using NHCSs@MnO₂ and activated carbon as the positive and negative electrodes exhibits high specific capacitance (105.5 F g^?1 at 0.5 A g^?1 and 78.5 F g^?1 at 10 A g^?1) with excellent rate capability, achieves a maximum energy density of 43.9 Wh kg^?1 at a power density of 408 W kg^?1, and has high stability, whereby the ASC retains 81.4 % of its initial capacitance at a current density of 5 A g^?1 after 4000 cycles. Therefore, the NHCSs@MnO₂ electrode material is a promising candidate for future energy‐storage systems.     

Free-standing ternary metallic sulphides/Ni/C-nanofiber anodes for high-performance lithium-ion capacitors

As a promising energy-storage device,the hybrid lithium-ion capacitor coupling with both a large energy density battery-type anode and a high power density capacitor-type cathode is attracting great attention.For the sake of improving the energy density of hybrid lithium-ion capacitor,the free-standing anodes with good electrochemical performance are essential.Herein,we design an effective electrospinning strategy to prepare free-standing MnS/Co_4S_3/Ni_3S_2/Ni/C-nanofibers(TMSs/Ni/C-NFs)film and firstly use it as a binder-free anode for hybrid lithium-ion capacitor.We find that the carbon nanofibers can availably prevent MnS/Co_4S_3/Ni_3S_2/Ni nanoparticles from aggregation as well as significantly improve the electrochemical performance.Therefore,the binder-free TMSs/Ni/C-NFs membrane displays an ultrahigh reversible capacity of 1246.9 m Ah g~(-1)at 100 m A g~(-1),excellent rate capability(398 mAh g~(-1) at2000 mA g~(-1)),and long-term cyclic endurance.Besides,we further assemble the hybrid lithium-ion capacitor,which exhibits a high energy density of 182.0 Wh kg~(-1)at 121.1 W kg~(-1)(19.0 Wh kg~(-1) at 3512.5 W kg~(-1))and remarkable cycle life.     

High-performance supercapacitor electrodes based on graphene hydrogels modified with 2-aminoanthraquinone moieties

2-Aminoanthraquinone (AAQ) molecules were covalently grafted onto chemically modified graphene (CMG), and the AAQ functionalized CMG sheets were self-assembled into macroporous hydrogels for supercapacitor electrodes. The electrode based on the AAQ modified self-assembled graphene hydrogel (AQSGH) showed a high specific capacitance of 258 F g(-1) at a discharge current density of 0.3 A g(-1), which is much larger than that of a pure graphene hydrogel (193 F g(-1)). Furthermore, the AQSGH electrode exhibited excellent rate capability and a long cycle life. This is mainly due to the covalently bonded AAQ moieties contributing additional redox capacitance. Furthermore, the highly conductive graphene hydrogel scaffold provided a large specific surface area for forming electric double layers and convenient routes for charge transfer and electrolyte diffusion.     

WO3/碳布柔性非对称超级电容器的组装及性能研究

以超级电容器的电极材料制备、性质研究及对组装的非对称超级电容器的性能研究为核心内容,提高超级电容器电化学性能为主要目的,采用水热合成法在碳布基底上合成三氧化钨/碳布和活化后的碳布为超级电容器的电极材料。采用SEM、XRD表征方法对制备的材料进行了形貌表征及物相分析;使用上海辰华电化学工作站对电极材料进行了循环伏安、恒流充放电、交流阻抗等电化学性能测试. 最终得到以三氧化钨/碳布为正极材料、活化后的碳布为负极材料组装成不对称柔性电容器,进行电化学测试,其电位窗口提高到0~1.6 V,电流密度61.9 mA·cm^-2时,电容达到58.96 F·cm-2,功率密度0.48 W·cm^-2时,能量密度为20.36 mWh·cm^-2,同时在电流密度8 mA·cm^-2时,循环3000次时表现出良好的循环性能,相较于对称型超级电容器,倍率性能更加优异.     

Development of high-performance supercapacitor electrodes using novel ordered mesoporous tungsten oxide materials with high electrical conductivity

An ordered mesoporous WO(3-x) material was employed for use as a supercapacitor electrode. This material exhibited a high rate capability and an excellent capacitance (366 μF cm(-2), 639 F cm(-3)), which were probably attributed to the large ordered mesopores, high electrical conductivity, and high material density.     

Facile hydrothermal synthesis of zinc sulfide nanowires for high-performance asymmetric supercapacitor

A facile, single-step hydrothermal route is followed to prepare ZnS nanowires with large aspect ratios. The obtained ZnS nanowires deposited on nickel foam (ZnS/Ni-foam) exhibit a specific capacitance of 781 F/g at a current density of 0.5 A/g. An asymmetric supercapacitor fabricated from ZnS/Ni-foam as a positive electrode and jute derived activated carbon coated on Ni-foam (JAC/Ni-foam) as a negative electrode attains a high specific capacitance of 573 F/g at a current density of 0.5 A/g, with an accompanying high energy density of 51 Wh/kg at a power density of 200 W/kg in an extensive operating potential window of 1.2 V. In addition, the ZnS//JAC asymmetric supercapacitor reveals long-term cyclic stability, after 10,000 GCD cycles the device sustain around ～87 % of the initial specific capacitance. These results shed enlighten a new opportunity for promising electrode materials in supercapacitors.     

线状全固态CNTF@ZnCo-OH//CNTF@RGO超级电容器的制备与电化学性能

采用电化学沉积在碳纳米管纤维上复合锌钴氢氧化物纳米片（CNTF@ZnCo-OH）,并研究其电化学性能。实验结果表明CNTF@ZnCo-OH电极在2 A·g^-1的电流密度下比电容为748 F·g^-1,在10 A·g^-1的电流密度下循环2 000圈以后,比电容保持率高达110.4%。该优异循环性能得益于碳纳米管纤维基底的网络结构和ZnCo-OH的纳米片状结构。以CNTF@RGO（石墨烯）为负极、CNTF@ZnCo-OH为正极,组装线状全固态非对称CNTF@ZnCo-OH//CNTF@RGO超级电容器。该器件在0.5 A·g^-1电流密度下比电容为70 F·g^-1,2 000次循环后电容保持率为79.6%,并且在不同的弯曲状态下保持电化学性能不变,具有优良的机械稳定性。该非对称线状器件可以在0.8~1.4 V之间工作,其能量密度高达19.1 Wh·kg^-1,对应的功率密度为1 400.3 W·kg^-1。2个30 mm长的线状器件可持续点亮LED灯10 s。     

Nitrogen-doped porous carbon coated on MnCo2O4 nanospheres as electrode materials for high-performance asymmetric supercapacitors

Spinel-based nanostructured materials are commonly used as promising electrode materials for supercapacitor applications. The combination of heteroatom-doped carbon material with spinel oxides substantially improves the specific capacitance and cyclic stability. In this work, dopamine-derived nitrogen-doped carbon was coated on spinel phase MnCo₂O₄ nanospheres using simple solvothermal and calcination methods. Surface morphology and the crystalline structure of the prepared MnCo₂O₄@Nitrogen-doped carbon were confirmed by FESEM and X-ray diffraction. The electrochemical performance of MnCo₂O₄@Nitrogen-doped carbon electrode material was analyzed by cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy techniques. MnCo₂O₄@nitrogen-doped carbon exhibits the highest specific capacitance of 1200 F/g compared to MnCo₂O₄ spheres are 726 F/g at 1 A/g and exhibits excellent cyclic stability (capacitance retention of 87% at 7 A/g after 3000 cycles). The enhanced performance of the composite might be benefitted from the synergistic effect between nitrogen-doped carbon on porous MnCo₂O₄ spheres. Furthermore, an asymmetric supercapacitor device was fabricated by using the optimized composition of MnCo₂O₄@NC-2 as a positive electrode and nitrogen, sulfur-doped reduced graphene oxide (NS-rGO) as a negative electrode, respectively. This asymmetric supercapacitor device achieves a maximum energy density of 61.0 Wh/kg at a power density of 2889 W/kg and possesses excellent capacitance retention of 95% after 5000 cycles at 7 A/g.     

Asymmetric supercapacitors based on stabilized α-Ni(OH)2 and activated carbon

In this work, stabilized Al-substituted α-Ni(OH)₂ materials were successfully synthesized by a chemical coprecipitation method. The experimental results showed that the 7.5% Al-substituted α-Ni(OH)₂ materials exhibited high specific capacitance (2.08?×?10³ F/g) and excellent rate capability due to the high stability of Al-substituted α-Ni(OH)₂ structures in alkaline media, suggesting its potential application in electrode material for supercapacitors. To enhance energy density, an asymmetric type pseudo/electric double-layer capacitor was considered where α-Ni(OH)₂ materials and activated carbon act as the positive and negative electrodes, respectively. Values for the maximum specific capacitance of 127 F/g and specific energy of 42 W·h/kg were demonstrated for a cell voltage between 0.4 and 1.6 V. By using the α-Ni(OH)₂ electrode, the asymmetric supercapacitor exhibited high energy density and stable power characteristics. The hybrid supercapacitor also exhibited a good electrochemical stability with 82% of the initial capacitance over consecutive 1,000 cycle numbers.     

Enhanced energy density of asymmetric supercapacitors via optimizing negative electrode material and mass ratio of negative/positive electrodes

An asymmetric supercapacitor based on manganese dioxide/Au/nickel foam (MANF) electrode as positive electrode and graphene or commercial activated carbons (AC) as negative electrode was fabricated. The effect of different negative electrode materials and mass ratios of negative/positive electrodes on the electrochemical properties of the asymmetric supercapacitor was carefully investigated. The results suggest that the mass ratio of negative/positive electrode has a significant impact on the specific capacitance of the asymmetric supercapacitor. Especially, it is found that the optimal mass ratio of the negative/positive electrode is slightly lower than that calculated according to charge balance. On the other hand, the asymmetric supercapacitor with commercialized AC as negative electrode possesses higher specific capacitance and better rate capability than that of the asymmetric supercapacitor with graphene as negative electrode. The negative material has slight impact on the cycle stability of the asymmetric supercapacitor. In addition, the optimized asymmetric supercapacitor with MANF composite as positive electrode and AC as negative electrode can obtain an energy density as high as 65.9 Wh?kg^?1 at a power density of 180 W?kg^?1 and a cell voltage of 1.8 V in the neutral Na₂SO₄ aqueous solution.     

γ-MnO_2 nanorods/graphene composite as efficient cathode for advanced rechargeable aqueous zinc-ion battery

Aqueous Zn//MnO_2 batteries are emerging as promising large-scale energy storage devices owing to their cost-effectiveness,high safety,high output voltage,and energy density.However,the MnO_2 cathode suffers from intrinsically poor rate performance and rapid capacity deterioration.Here,we remove the roadblock by compositing MnO_2 nanorods with highly conductive graphene,which remarkably enhances the electrochemical properties of the MnO_2 cathode.Benefiting from the boosted electric conductivity and ion diffusion rate as well as the structural protection of graphene,the Zn//MnO_2-graphene battery presents an admirable capacity of 301 mAh g~(-1) at 0.5 A g~(-1),corresponding to a high energy density of 411.6 Wh kg~(-1).Even at a high current density of 10 A g~(-1),a decent capacity of 95.8 mAh g~(-1) is still obtained,manifesting its excellent rate property.Furthermore,an impressive power density of 15 kW kg~(-1) is achieved by the Zn//MnO_2-graphene battery.     

Construction of CoS_2 nanoparticles embedded in well-structured carbon nanocubes for high-performance potassium-ion half/full batteries

Metal sulfides have been widely investigated as promising electrode materials for potassium-ion batteries(PIBs) due to their high theoretical capacities.However,the practical application of metal sulfides in PIBs is still hindered by their intrinsic shortcomings of low conductivity and severe volume changes during the potassiation/depotassiation process.Herein,a simple template-based two-step annealing strategy is proposed to impregnate CoS_2 nanoparticles in the well-structured carbon nanocubes(denoted CoS_2/CNCs) as an advanced anode material for PIBs.The ex-situ XRD measurements reveal the K storage mechanism in CoS_2/CNCs.Benefiting from the unique structures,including abundant active interfacial sites,high electronic conductivity,and significantly alleviated volume variation,CoS_2/CNCs present a high specific capacity(537.3 mAh g~(-1) at0.1 A g~(-1)),good cycling stability(322.4 mAh g~(-1) at 0.5 A g~(-1) after 300 cycles),and excellent rate capability(153.1 mAh g~(-1) at5 A g~(-1)).Moreover,the obtained nanocomposite shows superior potassium storage properties in K-ion full cells when it is coupled with a KVP04 F cathode.     

NiS2纳米片的制备及其在非对称超级电容器中的应用

本文采用牺牲模板法,以Ni(OH)₂作为前驱体制备NiS₂. 通过对NiS₂进行XRD、EDS、BET、SEM及TEM等表征来研究NiS₂的元素组成及结构形貌. SEM及TEM结果显示前驱体及NiS₂均为纳米片结构. 电化学测试结果表明NiS₂存在着优秀的电容性能,在电流密度为1 A·g^-1时,NiS₂比电容能够达到1067.3 F·g^-1,同时具有高的倍率特性. 为了进一步探究NiS₂作为电活性材料的实用性,以NiS₂作为阳极材料,活性炭（AC）作为阴极组装成非对称超级电容器,在功率密度为0.8 kW·kg^-1,能量密度高达38.4 Wh·kg^-1,并且在3000次恒流充放电后,比电容依然保持93.7%.     

A hexaazatriphenylene-based porous organic polymer for high performance supercapacitor

Porous organic polymers (POPs) with high physiochemical stability and pseudocapacitive activity are crucial for supercapacitors with high specific capacitance and long cycle life. We report herein a hexaazatrinaphthylene-based POP (HPOP-1) for high-performance supercapacitor by introducing redox-active hexaazatrinaphthylene (HATN) moiety through Sonogashira–Hagihara coupling reaction. HATN moiety can undergo a proton-induced electron transfer redox reaction, which endows HPOP-1 with high pseudocapacitive activity. As electrode materials for supercapacitor application, HPOP-1 exhibits high specific capacitance (667 F g⁻¹ at 0.5 A g⁻¹) and long-term cyclic stability (90% capacitance retention after 10,000 cycles at 5 A g⁻¹) in a three-electrode system with 1 M H₂SO₄ as the electrolyte. In addition, HPOP-1 also exhibits a specific capacitance of 376 F g⁻¹ at 0.5 A g⁻¹ in 1 M KOH electrolyte. An asymmetric supercapacitor was further fabricated with HPOP-1 as negative electrode and rGO as positive electrode, respectively. The device delivers a specific capacitance of 63 F g⁻¹ at 0.5 A g⁻¹ and a rate performance of 37 F g⁻¹ at 5 A g⁻¹. Our work provides a facile approach for the design and preparation of pseudocapacitive POPs with high specific capacitance and long cycle life.     

ZIF-67 derived hollow Ni-Co-Se nano-polyhedrons for flexible hybrid supercapacitors with remarkable electrochemical performances

Nano-polyhedral NiSe₂/CoSe₂ (Ni-Co-Se) with hollow architectures are synthesized by selenizing the precursors of Ni-Co bimetallic hydroxides that are directly derived from ZIF-67. The as-fabricated Ni-Co-Se electrodes exhibit high specific capacitance of 1668 F/g at 1 A/g accompanying with outstanding rate capability (about 82.8% retention of the initial capacity at 20 A/g). The corresponding Ni-Co-Se//AC all-solid-state hybrid supercapacitors are assembled by directly using the Ni-Co-Se on carbon fabric as the positive electrode, which deliver high energy density and power density (38.5 Wh/kg at 802.1 W/kg, 32.0 Wh/kg at 8008.8 W/kg), excellent cyclic stability (82.3% retention after 5000 cycle) and robust mechanical flexibility (no obvious attenuation at bending to different angles). This work will provide a new and smart route for constructing transition metal selenides for supercapacitor devices.     

萘基相互连接的多孔碳纳米囊的制备及超电容性能

以萘为碳源, 采用MgO模板诱导耦合KOH裁剪技术制备了相互连接的多孔碳纳米囊(ICNC). 结果表明所制备的ICNC₂具有大的比表面积(1811 m²/g)、 高的压实密度(1.38 g/cm³)和微孔孔容含量(58.93%). 在对称的超级电容器(SC)中, ICNC₂电极的体积比容在不同电流密度下分别高达420.8 F/cm³(0.069 A/cm³)和315 F/cm³(27.6 A/cm³), 容量保持率为74.82%. 在38 W/L功率密度下, ICNC₂基SC的体积能量密度为14.6 W?h/L. 经过20000次循环后, 其体积比容仅衰减1.4%, 库伦效率为99.1%, 为从萘基小分子制备储能用功能碳材料提供了一种可行的方法.