Impact of organic interlayer anions on the CO_2 adsorption performance of Mg-Al layered double hydroxides derived mixed oxides

Herein we report a systematical investigation on the promoting effect of the carbon chain length of the intercalated carboxylic anions on the CO_2 capture performance of Mg-Al layer double hydroxides(LDHs).A series of organo-LDHs were successfully synthesized via co-precipitation and calcination-rehydration methods. All as-prepared samples were characterized by many techniques including XRD, ATR-FTIR, BET,and TGA. The XRD and ATR-FTIR studies indicated that organic anions were successfully intercalated into LDHs. The influence of some important parameters such as calcination temperature, adsorption temperature, and coating with(Li-Na-K)NO_3 molten salt was investigated. The results exhibited that when the number of carbon is greater than 10, the CO_2 capture capacity steadily increased with the increase in carbon number. After coating with 55 mol%(Li-Na-K)NO_3 molten salt, the CO_2 uptake of LDH-C16 sample with high Mg/Al ratios can be increased up to 3.25 mmol/g. The CO_2 adsorption/desorption cycling stability was also studied using temperature swing adsorption, which showed a stable CO_2 capture performance even after 22 cycles. Considering its high CO_2 capture capacity and good cycling stability, this novel CO_2 adsorbent is very promising in the sorption-enhanced water gas shift(SEWGS) processes.     

Adsorption of Carbon Dioxide on Chemically Modified High Surface Area Carbon-Based Adsorbents at High Temperature

The adsorption capacity of carbon dioxide on high surface area carbon-based adsorbents before and after chemical modification at 28°C and 300°C have been studied. The high adsorption capacity adsorbents for carbon dioxide at high temperature have been developed by introducing MgO and S–CaO–MgO on carbon-based adsorbents. Their adsorption capacities for carbon dioxide were 0.28 and 0.22 m mol/g at 300°C, 1 Bar, respectively.     

Impact of solvents and surfactants on the self-assembly of nanostructured amine functionalized silica spheres for CO_2 capture

Macroscopic SiO_2 spheres with a homogeneous amine distribution were synthesized by a one-step emulsion based synthesis approach in a flow column reactor. The CO_2 adsorption capacity of the nanostructured amine-functionalized silica spheres was studied in absence and presence of H_2O. The structural properties were adjusted by varying solvents and surfactants during the synthesis and, at constant amine loadings, were found to be the main factor for influencing the CO_2 sorption capacities. Under water-free conditions CO_2 is bound to the amino groups via the formation of carbamates, which require two neighboring amino groups to adsorb one CO_2 molecule. At constant amine concentrations sorbents with lower surface area allow to establish a higher amine density on the surface, which enhances the CO_2 uptake capacities under dry conditions. In presence of H_2O the CO_2 adsorption changes to 1:1 stoichiometry due to stabilization of carbamates by protonation of H_2O and formation of further species such as bicarbonates, which should in principle double the adsorption capacities. Low concentrations of physisorbed H2O(0.3 mmol/g) did not impair the adsorption capacity of the adsorbents for CO_2, while at higher water uptakes(0.6 and 1.1 mmol/g) the CO_2 uptake is reduced, which could be attributed to capillary condensation of H_2O or formation of bulky reaction products blocking inner pores and access to active sites.     

模拟烟气气氛下矿物元素组分对砷的吸附特性研究

利用气相砷吸附反应实验装置,研究了300-900℃条件下CaO、Fe₂O₃、MgO、Al₂O₃、K₂SO₄及钙铁混合吸附剂在模拟烟气气氛下的As₂O₃（g）吸附特性。结果表明,在五种单元素吸附剂中,CaO的吸附能力最强,K₂SO₄最弱;随着温度升高,CaO的吸附量先增加,在700℃时略微下降后又增加,Fe₂O₃的吸附量先增加后减少,MgO、Al₂O₃、K₂SO₄的吸附量一直增加;三种比例的钙铁混合吸附剂的吸附效果的实验值相比计算值至少提高了92%,Ca：Fe比为3：1时,吸附效果最好,达到7.91 mg/g。混合后烧结反应导致表面结构改变是吸附效果提升的重要原因。     

二次嫁接法制备氨基修饰的硅基二氧化碳吸附剂

采用二次嫁接法制备了一系列氨基修饰的SBA-15二氧化碳(CO₂)吸附剂,利用XRD、BET、热重、元素分析、电镜、红外等表征手段对吸附剂进行了表征,并通过固定床测量穿透曲线的方法研究了其CO₂吸附性能,分别考察了不同制备途径和不同有机胺类型等因素对吸附剂结构以及其CO₂吸附性能的影响,同时,还通过多次吸脱附实验考察了吸附剂循环吸脱附的稳定性。结果表明,超声法所制备的聚乙烯亚胺(PEI)嫁接的吸附剂具有最优的CO₂吸附性能,在CO₂分压为10 kPa,反应温度为25 ℃时,吸附量达到1.72 mmol/g;进行多次循环吸脱附实验后,吸附量未见明显降低,表明吸附剂具有稳定的循环吸附性能。     

Coassembled ionic liquid/laponite hybrids as effective CO_2 adsorbents

Hybrid adsorbents for CO_2 capture were prepared by coassembling laponite(LP) nanosheets and 1-nbutyl-3-methylimidazolium chloride(BMIMCl). The prepared BMIMCl/LP layered hybrids were systematically characterized. The interlayer distance of the BMIMCl/LP layered hybrids expanded with an increasing concentration of BMIMCl, indicating that cumulative BMIMCl was intercalated into the LP layers. The efficiency of BMIMCl toward CO_2 capture was significantly enhanced after it was immobilized within LP layers.     

树脂填充聚醚砜纤维吸附剂对牛血清蛋白吸附性能的研究

重点研究树脂填充聚醚砜(PES)纤维吸附剂与模型蛋白质牛血清蛋白(BSA)之间的吸附与脱附行为.结果表明,蛋白质BSA在树脂填充PES纤维吸附剂中的平衡吸附过程较好地符合朗格缪尔吸附模型,树脂Lewatit CNP80ws填充PES吸附剂的最大吸附容量约为139mg BSA/g吸附剂.表面具有开孔结构的树脂填充PES纤维吸附剂的吸附速率较快,在不同结构纤维吸附剂中BSA的扩散系数在1·82×10-14~8·7×10-14m2/s范围内变化.另外,考察了BSA溶液的pH与洗脱剂等因素对吸附剂吸附与脱附性能的影响,研究结果对蛋白质的实际分离纯化具有重要的参考价值.     

High-throughput isotherm determination and thermodynamic modeling of protein adsorption on mixed mode adsorbents

The thermodynamic modeling of protein adsorption on mixed-mode adsorbents functionalized with ligands carrying both hydrophobic and electrostatic groups was undertaken. The developed mixed mode isotherm was fitted with protein adsorption data obtained for five different proteins on four different mixed mode adsorbents by 96-well microtitre plate high throughput batch experiments on a robotic workstation. The developed mixed mode isotherm was capable of describing the adsorption isotherms of all five proteins (having widely different molecular masses and iso-electric points) on the four mixed mode adsorbents and over a wide range of salt concentrations and solution pH, and provided a unique set of physically meaningful parameters for each resin-protein-pH combination. The model could capture the typically observed minimum in mixed mode protein adsorption and predict the precise salt concentration at which this minimum occurs. The possibility of predicting the salt concentration at which minimum protein binding occurs presents new opportunities for designing better elution strategies in mixed mode protein chromatography. Salt-protein interactions were shown to have important consequences on mixed mode protein adsorption when they occur. Finally, the mixed mode isotherm also gave very good fit with literature data of BSA adsorption on a different mixed mode adsorbent not examined in this study. Hence, the mixed mode isotherm formalism presented in this study can be used with any mixed mode adsorbent having the hydrophobic and electrostatic functional groups. It also provides the basis for detailed modeling and optimization of mixed mode chromatographic separation of proteins.     

CaO/MgO和CaO/Ca9Al6O18同时捕集CO2/SO2的循环吸收特性

以葡萄糖酸钙与葡萄糖酸镁及L-乳酸铝为前驱物,湿法制得了四种CaO/MgO和CaO/Ca₉Al₆O₁₈吸收剂,并进行了同时捕集CO₂/SO₂的实验。考察了吸收剂种类、质量配比、SO₂浓度及煅烧温度等对吸收剂吸收性能的影响。结果表明,CaO/MgO(质量比为75%/25%)吸收剂和CaO/Ca₉Al₆O₁₈(质量比为75%/25%)吸收剂分别保持了最好的吸收CO₂能力和最好的循环稳定性。SO₂严重阻碍了吸收剂对CO₂的捕集。SO₂浓度越高,吸收剂吸收CO₂能力下降的越快,但同时吸收SO₂的转化率也越高。数次循环后,总的Ca利用率开始上升,且SO₂浓度越高,上升趋势越明显。煅烧温度对CaO/MgO吸收剂和CaO/Ca₉Al₆O₁₈吸收剂循环吸收特性的影响略有不同。     

Carbon dioxide capture from the air using a polyamine based regenerable solid adsorbent

Easy to prepare solid materials based on fumed silica impregnated with polyethylenimine (PEI) were found to be superior adsorbents for the capture of carbon dioxide directly from air. During the initial hours of the experiments, these adsorbents effectively scrubbed all the CO(2) from the air despite its very low concentration. The effect of moisture on the adsorption characteristics and capacity was studied at room temperature. Regenerative ability was also determined in a short series of adsorption/desorption cycles.     

Amine-functionalized low-cost industrial grade multi-walled carbon nanotubes for the capture of carbon dioxide

Industrial grade multi-walled carbon nanotubes (IG-MWCNTs) are a low-cost substitute for commercially purified multi-walled carbon nanotubes (P-MWCNTs). In this work, IG-MWCNTs were functionalized with tetraethylenepentamine (TEPA) for CO₂ capture. The TEPA impregnated IG-MWCNTs were characterized with various experimental methods including N₂ adsorption/desorption isotherms, elemental analysis, X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis. Both the adsorption isotherms of IG-MWCNTs-n and the isosteric heats of different adsorption capacities were obtained from experiments. TEPA impregnated IG-MWCNTs were also shown to have high CO₂ adsorption capacity comparable to that of TEPA impregnated P-MWCNTs. The adsorption capacity of IG-MWCNTs based adsorbents was in the range of 2.145 to 3.088 mmol/g, depending on adsorption temperatures. Having the advantages of low-cost and high adsorption capacity, TEPA impregnated IG-MWCNTs seem to be a promising adsorbent for CO₂ capture from flue gas.     

Effect of CO2 adsorbents on the Ni-based dual-function materials for CO2 capturing and in situ methanation

The present work studied the effect of different carbon dioxide (CO₂) adsorbents on Ni-based dual-function materials (DFMs) for the development of carbon capture and on-site utilization in a reactor at isothermal condition. The DFMs containing Ni functioning as a methanation catalyst with various CO₂ adsorbents (i.e., CaO, MgO, K₂CO₃, or Na₂CO₃) were prepared on γ-Al₂O₃ through sequential impregnation. The result indicated that Ni-Na₂CO₃/γ-Al₂O₃ had the highest methanation capacity (i.e., 0.1783 mmol/g) and efficiency (i.e., 71.09%) in the CO₂ adsorption–methanation test. The CO₂ uptake and the subsequent methanation capacity of the Ni-Na₂CO₃/γ-Al₂O₃ increased to more than 24 times and more than 17 times, respectively, compared to Ni/γ-Al₂O₃. The high methanation capacity was correlated to its highest amount of weak basic sites, substantial CO₂ capture capacity and capture/release efficiency, and reactivity to H₂ at a lower temperature, supported by CO₂-TPD, TGA analyses for adsorption or adsorption–desorption at the isothermal condition, and H₂-TPRea, respectively. A continuous cyclic CO₂ adsorption–methanation was performed by using the Ni-Na₂CO₃/γ-Al₂O₃ and Ni-CaO/γ-Al₂O₃, showing that the CO₂ adsorption capacity was stabilized from third cycle onward, whereas the methanation capacity was stabilized at all cycles, indicating the high stability of the DFMs for both CO₂ adsorption and subsequent methanation. This work demonstrated successful synthesis of the Ni-based, low-cost, and stable DFMs with the ability to produce methane via the direct capture of CO₂.     

11种吸附剂上二噁英的热吸附/脱附性能评价

筛选在低温下高效捕集并在一定的高温下可以快速完全脱附二噁英的吸附/脱附材料是二噁英在线热捕集的关键.该研究以1,2,3,4-四氯代二苯并-对-二噁英(1,2,3,4-TCDD)和1,2,3,8,9-五氯代二苯并呋喃(1,2,3,8,9-PCDF)为二噁英模型物,以电子捕获检测器(ECD)作为检测器,利用填充柱气相色谱系...     

Resorcinol-formaldehyde resin-based porous carbon spheres with high CO_2 capture capacities

Porous carbon spheres are prepared by direct carbonization of potassium salt of resorcinol-formaldehyde resin spheres, and are investigated as CO_2 adsorbents. It is found that the prepared carbon materials still maintain the typical spherical shapes after the activation, and have highly developed ultra-microporosity with uniform pore size, indicating that almost the activation takes place in the interior of the polymer spheres. The narrow-distributed ultra-micropores are attributed to the "in-situ homogeneous activation"effect produced by the mono-dispersed potassium ions as a form of -OK groups in the bulk of polymer spheres. The CS-1 sample prepared under a KOH/resins weight ratio of 1 shows a very high CO_2 capture capacity of 4.83 mmol/g and good CO_2/N_2 selectivity of ~17-45. We believe that the presence of a welldeveloped ultra-microporosity is responsible for excellent CO_2 sorption performance at room temperature and ambient pressure.     

Targeted synthesis of novel porous aromatic frameworks with selective separation of CO_2/CH_4and CO_2/N_2

Novel porous aromatic frameworks（PAF-53 and PAF-54） have been obtained by the polymerization of amino compound（p-phenylenediamine and melamine） and cyanuric chloride. They display a certain amount of CO2 adsorption capacity and highly selective separation of CO2/CH4 and CO2/N2 as 18.1 and83 by Henry Law respectively. They may be applied as ideal adsorbents to separate and capture CO2.     

Adsorption of hydrogen isotopes on micro- and mesoporous adsorbents with orderly structure

The equilibrium and dynamic adsorption data of H(2) and D(2) on different micro- and mesoporous adsorbents with orderly structure including 3A, 4A, 5A, Y, and 10X zeolites; carbon CMK-3; silica SBA-15; and so forth were collected. Critical effect of the nanodimension of adsorbents on the adsorption behavior of hydrogen and its isotopes is shown. The highest adsorption capacity was observed at pore size 0.7 nm, but equal or even larger isotope difference in the equilibrium adsorption was observed at larger pore sizes, whereas the largest isotope difference in the dynamic adsorption was observed at 0.5 nm. The adsorption rate of D(2) is larger than that of H(2) in microporous adsorbents, but the sequence could be switched over in mesoporous materials. Linear relationship was observed between the adsorption capacity for hydrogen and the specific surface area of adsorbents although the adsorbents are made of different material, which provides a convincing proof of the monolayer mechanism of hydrogen adsorption. The linear plot for microporous adsorbents has a larger slope than that for mesoporous adsorbents, which is attributed to the stronger adsorption potential in micropores.     

酚醛型吸附树脂对VB_(12)的吸附性能研究

研究了酚醛型吸附树脂JDW 1、JDW 2 (自制 )和DuoliteS 76 1对VB12 的静态和动态吸附 .结果表明 ,JDW 1对VB12 的吸附量达 84mg g ,明显优于DuoliteS 76 1;吸附VB12 的初始阶段 ,即达到 4 3%～6 9%平衡吸附时 ,吸附速率数据和半经验速率方程很吻合 ;酚醛型吸附树脂等温吸附VB12 的平衡吸附数据符合Langmuir方程 ,相关系数在 0 99以上 ,因此 ,酚醛型吸附树脂吸附VB12 属单分子层吸附 ;在动态条件下 ,用含甲醇 80 %溶液以 1 1BV h来洗脱吸附VB12 的JDW 2 ,在 4 2、6 4个床体积的洗脱率分别是 92 2 0 %、95 93% ,这表明酚醛型吸附树脂具有良好的洗脱性能 ,用含甲醇为 80 %溶液作洗脱剂从JDW 2洗脱VB12 ,效果很好     

Reversed-flow gas chromatographic study of interaction between the components of a salt-modified adsorbent

Summary The new Technique of reversed-flow gas chromatography was used to study the possible interactions between the two components of salt-modified adsorbents. The inert volatile solutes weren-hexane and benzene. Partition ratios of these solutes on the modified adsorbents, at various temperatures, were measured, followed by the determination of the differential enthalpies of adsorption. The plots of these enthalpies versus mole fraction of the modifier show a minimum for benzene and a maximum forn-hexane. These are taken as indications of an interaction between the components of the modified adsorbent.     

Progress in adsorption-based CO2 capture by metal-organic frameworks

Metal-organic frameworks (MOFs) have recently attracted intense research interest because of their permanent porous structures, large surface areas, and potential applications as novel adsorbents. The recent progress in adsorption-based CO(2) capture by MOFs is reviewed and summarized in this critical review. CO(2) adsorption in MOFs has been divided into two sections, adsorption at high pressures and selective adsorption at approximate atmospheric pressures. Keys to CO(2) adsorption in MOFs at high pressures and low pressures are summarized to be pore volumes of MOFs, and heats of adsorption, respectively. Many MOFs have high CO(2) selectivities over N(2) and CH(4). Water effects on CO(2) adsorption in MOFs are presented and compared with benchmark zeolites. In addition, strategies appeared in the literature to enhance CO(2) adsorption capacities and/or selectivities in MOFs have been summarized into three main categories, catenation and interpenetration, chemical bonding enhancement, and electrostatic force involvement. Besides the advantages, two main challenges of using MOFs in CO(2) capture, the cost of synthesis and the stability toward water vapor, have been analyzed and possible solutions and path forward have been proposed to address the two challenges as well (150 references).     

Adsorption and decomposition of diacylic peroxides on the surfaces of dispersed oxides

The adsorption of oligo(sebacoyl peroxide) on Aerosil and MgO and benzoyl peroxide on Fe₂O₃, Cr₂O₃, and V₂O₅ has been studied. It has been established that peroxide adsorption on the considered adsorbents is described by the Langmuir equation. Benzoyl-peroxide adsorption increases in the series Fe₂O₃ < Cr₂O₃ < V₂O₅. The process of thermal decomposition of peroxides in the presence of the listed adsorbents has been studied. The overall reaction of peroxide decomposition comprises two components, i.e., the decomposition processes occurring in a solution and on an adsorbent surface. Kinetic and activation parameters of the thermal-decomposition reactions in the solutions and on the surfaces have been determined.