Au/BiOBr/石墨烯复合物的制备及其苯酚降解光催化性能

采用水热法和多巴胺还原法制备了Bi OBr、Bi OBr/石墨烯和Au/Bi OBr/石墨烯光催化剂,并利用扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、光致发光光谱(PL)和紫外-可见漫反射光谱(UV-vis DRS)等方法表征其形貌、相结构、光谱吸收性质以及组成结构。在可见光照射下,通过对水相中苯酚的降解,考察了Au/Bi OBr/石墨烯复合光催化剂活性。结果表明,由于量子效率的提高、带隙能的降低(2.25 e V)以及Au表面等离子体共振,复合光催化剂表现出比纯Bi OBr更高的光催化活性,Au/Bi OBr/石墨烯复合物在180 min内对苯酚降解率可达到64%。     

Microwave-assisted synthesis of BiOBr/graphene nanocomposites and their enhanced photocatalytic activity

BiOBr/graphene nanocomposites were synthesized by a green single-step microwave strategy and characterized by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. The photocatalytic activity of the as-prepared BiOBr nanoplates and BiOBr/graphene nanocomposites for the photodegeneration of organic dyes in aqueous solution under visible light irradiation was investigated. The results show that BiOBr/graphene nanocomposites have a higher photocatalytic activity than bare BiOBr nanoplates.     

Novel Bi/BiOBr/AgBr composite microspheres: Ion exchange synthesis and photocatalytic performance

Novel Bi/BiOBr/AgBr composite microspheres were prepared by a rational in situ ion exchange reaction between Bi/BiOBr microspheres and AgNO₃. The characteristic of the as-obtained ternary microspheres was tested by X-ray diffraction (XRD), energy dispersive X-ray spectrometer (EDS), scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectroscopy (UV–vis DRS) and photoluminescence (PL). Under visible light irradiation, Bi/BiOBr/AgBr microspheres exhibited an excellent photocatalytic efficiency for rhodamine B (RhB) degradation, which was about 1.4 and 4.9 times as high as that of Bi/BiOBr and BiOBr/AgBr, demonstrating that the highest separation efficiency of charge carriers in the heterostructured Bi/BiOBr/AgBr. The photocatalytic activity of Bi/BiOBr/AgBr microspheres just exhibited a slight decrease after three consecutive cycles. The photocatalytic mechanism investigation confirmed that the superoxide radicals (O₂^•−) were the dominant reactive oxygen species for RhB degradation in Bi/BiOBr/AgBr suspension.     

超声波辐射快速合成高光催化性能的BiOCl(Br)纳米片

在室温条件下,利用超声波辐射方法快速合成了四方状BiOCl(BiOBr)纳米片光催化剂。应用N2-物理吸附、X射线粉末衍射、扫描电镜、透射电镜、紫外可见光谱等手段对催化剂进行了表征,并以波长为λ=365 nm的紫外光和420 nm<λ<660 nm的可见光为光源,评价了该催化剂光催化降解酸性橙Ⅱ的活性。表征结果表明,超声波辐射可加速BiOCl和BiOBr晶化过程,显著提高BiOCl和BiOBr的结晶度,并使其晶粒发生细化,提高催化剂的比表面积。活性测试表明,声化学合成样品的光催化活性优于普通搅拌制备的样品。其中BiOCl的紫外光催化活性高于商业TiO2(P25)光催化剂。     

Z型可见光催化剂Au NPs/g-C3N4/BiOBr的构建及其光催化性能

通过水热和原位还原法制备了一种新型Z型异质结三元复合材料Au NPs/g-C₃N₄/BiOBr,并通过X射线衍射、X射线光电子能谱、透射电子显微镜、紫外-可见漫反射光谱和光致发光发射光谱等技术对材料的形貌、结构进行了表征。通过在可见光下降解苯酚来评价光催化剂的活性。研究发现,Au NPs/g-C₃N₄/BiOBr显示出增强的光催化活性,对苯酚的降解能力是g-C₃N₄的3倍,是BiOBr的2.5倍。这可归因于三元复合材料的窄带隙（2.10eV）、Z型机理对光生电子-空穴对的有效分离和Au纳米颗粒的表面等离子体共振效应（SPR）。     

n-p异质结型CdS/BiOBr复合光催化剂的制备及性能

采用两步水热法制备了CdS/BiOBr复合光催化剂,并通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和紫外-可见漫反射光谱(UV-Vis DRS)等手段对其物相、表面结构、光响应性等性质进行了表征.结果表明,合成的CdS/BiOBr复合材料是n-p型异质结,由CdS颗粒裹附在BiOBr纳米球的表面构成,这种结构不仅具有良好的可见光响应范围,且有利于光生电子的迁移,并有效地抑制光生电子/空穴对的复合.通过光催化降解模拟染料废水和光催化脱除模拟含硫燃料评价了CdS/BiOBr复合材料的可见光催化性能.结果表明,6%(质量分数)CdS/BiOBr降解次甲基蓝的拟一级动力学常数分别为BiOBr和CdS的5.3和9.6倍,脱除噻吩的拟一级动力学常数分别为BiOBr和CdS的1.9和3.2倍.CdS/BiOBr具有良好的光催化稳定性,循环使用5次后,降解率仍能达到90%以上.     

Improved visible light photocatalytic activity of sphere-like BiOBr hollow and porous structures synthesized via a reactable ionic liquid

BiOBr uniform flower-like hollow microsphere and porous nanosphere structures have been successfully synthesized through a one-pot EG-assisted solvothermal process in the presence of reactable ionic liquid 1-hexadecyl-3-methylimidazolium bromide ([C(16)mim]Br). The as-prepared samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) and diffuse reflectance spectroscopy (DRS). Possible formation mechanism for the growth of hollow microspheres was discussed. During the reactive process, ionic liquid [C(16)mim]Br played the role of solvent, reactant and template at the same time. Moreover, the photocatalytic activities of BiOBr flower-like hollow and porous structures were evaluated on the degradation of rhodamine B (RhB) under visible light irradiation. The results assumed that BiOBr porous nanospheres sample showed much higher photocatalytic activity than the conventionally prepared sample and TiO(2) (Degussa, P25). The relationship between the structure of the photocatalyst and the photocatalytic activities were also discussed in detail; it can be assumed that the enhanced photocatalytic activities of BiOBr materials could be ascribed to a synergistic effect, including high BET surface area, the energy band structure, the smaller particle size and light absorbance.     

g-C3N4-BiOBr复合材料制备及可见光催化性能

利用原位沉积法将Bi OBr纳米片生长到g-C_3N_4表面,制得g-C_3N_4-Bi OBr p-n型异质结复合光催化剂。采用X射线衍射(XRD)、红外光谱(FTIR)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、紫外可见漫反射(UV-Vis-DRS)和荧光光谱(PL)等测试对光催化剂结构和性能进行表征。通过可见光辐照降解甲基橙水溶液检测评估复合光催化剂光催化活性。研究结果表明:复合光催化剂由Bi OBr和g-C_3N_4两相组成,Bi OBr纳米片在片状g-C_3N_4表面快速形核生长形成面-面复合结构。相比于纯相g-C_3N_4和Bi OBr,g-C_3N_4-Bi OBr复合材料具有更强可见光吸收能力,吸收带边红移。在可见光辐照100 min后,性能最佳的2:8 gC_3N_4-Bi OBr复合光催化剂光催化活性分别是纯相g-C_3N_4和Bi OBr的1.8和1.2倍,经过4次循环实验后,其降解率仍达84%,说明复合结构光催化剂催化性能和稳定性增强。复合光催化剂的荧光强度显著降低,说明光生载流子复合得到了有效抑制。复合光催化剂催化性能的提高归因于p-n型异质结促进电荷有效分离、抑制电子-空穴复合和吸收光波长范围的扩展,相比单一成分材料具有更好的催化活性和稳定性。自由基捕获实验证明,可见光降解甲基橙光催化过程中的主要活性成分为空穴,并据此提出了可能的光催化机理。     

ZnO修饰提升花状BiOBr的可见光催化降解罗丹明B性能

以Bi(NO₃)₃·5H₂O、Zn(CH₃COO)₂·2H₂O和NaBr为前驱体,采用简单溶剂热法制备BiOBr/ZnO三维花状微纳米复合材料。采用X射线衍射、扫描电子显微镜、X射线光子能谱、N₂吸附-脱附、光致发光和电子顺磁共振等分析技术对其理化性质进行了表征。通过可见光催化降解罗丹明B(RhB)的实验测试了复合材料的光催化性能。结果表明ZnO含量为5%的BiOBr/ZnO光催化活性最优,RhB降解率在50 min后达到98.3%,其降解速率常数是纯ZnO和BiOBr的6.3倍和3.4倍,并且具有较高的稳定性。复合材料光催化性能增强的可能原因为ZnO的引入增强了可见光的吸收和光生载流子的电荷分离效率。     

g-C3N4-BiOBr复合材料制备及可见光催化性能

利用原位沉积法将BiOBr纳米片生长到g-C₃N₄表面,制得g-C₃N₄-BiOBr p-n型异质结复合光催化剂。采用X射线衍射(XRD)、红外光谱(FTIR)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、紫外可见漫反射(UV-Vis-DRS)和荧光光谱(PL)等测试对光催化剂结构和性能进行表征。通过可见光辐照降解甲基橙水溶液检测评估复合光催化剂光催化活性。研究结果表明:复合光催化剂由BiOBr和g-C₃N₄两相组成,BiOBr纳米片在片状g-C₃N₄表面快速形核生长形成面-面复合结构。相比于纯相g-C₃N₄和BiOBr,g-C₃N₄-BiOBr复合材料具有更强可见光吸收能力,吸收带边红移。在可见光辐照100 min后,性能最佳的2:8 g-C₃N₄-BiOBr复合光催化剂光催化活性分别是纯相g-C₃N₄和BiOBr的1.8和1.2倍,经过4次循环实验后,其降解率仍达84%,说明复合结构光催化剂催化性能和稳定性增强。复合光催化剂的荧光强度显著降低,说明光生载流子复合得到了有效抑制。复合光催化剂催化性能的提高归因于p-n型异质结促进电荷有效分离、抑制电子-空穴复合和吸收光波长范围的扩展,相比单一成分材料具有更好的催化活性和稳定性。自由基捕获实验证明,可见光降解甲基橙光催化过程中的主要活性成分为空穴,并据此提出了可能的光催化机理。     

Heterojunction of BiPO4/BiOBr photocatalysts for Rhodamine B dye degradation under visible LED light irradiation

BiOBr synthesized by alcoholysis precipitation is used in the preparation of BiPO₄/BiOBr composites by adding H₃PO₄. Pristine BiOBr and a series of BiPO₄/BiOBr composites have been successfully synthesized using an entirely room-temperature production process. X-ray powder diffraction, scanning electron microscopy, High-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, UV–vis absorption spectroscopy were used to investigated the bulk structure, surface morphology, element composition and optical properties of the samples. The degradation effect of different proportions of BiPO₄/BiOBr composites, BiOBr and BiPO₄ on Rhodamine B (RhB) was evaluated under visible LED light irradiation. Compared to pure BiOBr and BiPO₄, the as-synthesized BiPO₄/BiOBr composites showed enhanced performance, with 30% BiPO₄/BiOBr composite showing the best performance, as it could degrade 95.66% of RhB (100 ml, 15 mg/L) within 120 min. The enhanced photocatalytic activity of BiPO₄/BiOBr was attributed to the heterojunction formation between BiOBr and BiPO₄ and efficient charge separation.     

ZnO/CdS复合材料的合成与可见光催化性能

采用喷雾辅助气相沉积法在水热法合成的ZnO纳米线上沉积CdS纳米颗粒。采用X射线衍射仪（XRD）、激光拉曼仪（Raman）、扫描电镜（SEM）、透射电镜（TEM）、X射线光电子能谱分析谱（XPS）和紫外可见漫反射光谱等测试手段对复合光催化剂进行表征。结果表明,3~10 nm的CdS纳米粒子修饰在直径约为100 nm ZnO纳米线的表面。XPS和Raman表明复合材料中ZnO和CdS之间存在化学相互作用。可见光催化降解罗丹明B实验结果表明ZnO/CdS复合材料的催化性能优于单相CdS或ZnO,沉积时间为30 s合成的ZnO/CdS速率常数分别是CdS和ZnO的2.91和4.03倍,且具有较高的稳定性。ZnO/CdS复合材料光催化性能增强的可能原因为光吸收范围的拓展和光生载流子分离效率的提高。     

Ag/ZnO纳米纤维的制备及光催化性能

采用静电纺丝技术及煅烧法制备了氧化锌纳米纤维, 然后采用水热法将银纳米颗粒负载到了氧化锌纳米纤维表面. 利用X射线衍射(XRD)、 X射线光电子能谱(XPS)、 能量色散X射线光谱(EDX)、 扫描电子显微镜(SEM)及透射电子显微镜(TEM)等技术对合成的Ag/ZnO纳米纤维的结构和组成进行了表征. SEM结果表明, 直径在5~100 nm之间的银纳米颗粒附着在直径在80~330 nm之间的氧化锌纤维表面形成了异质结构. 以常见的有机污染物甲基橙、 亚甲基蓝和罗丹明B等为降解底物, 对Ag/ZnO纳米纤维的光催化性能进行了表征. 结果表明, 负载银纳米颗粒后, 复合催化剂的光催化性能明显提高.     

Preparation of carbon nanotubes/BiOBr composites with higher visible light photocatalytic activity

A novel flower-like photocatalyst CNTs/BiOBr was successfully prepared by a facile hydrothermal method. The morphology and the physicochemical properties of the prepared samples were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray spectrometry (EDX), and UV-visible diffuse reflectance spectroscopy (UV-vis DRS). The photocatalytic activity was evaluated by degradation of Rhodamin B (RhB) dye. It was demonstrated that CNTs/BiOBr photocatalyst could effectively photodegrade RhB under visible light (VL) irradiation.     

Significantly enhanced photocatalytic performance of zinc oxide via bismuth oxybromide hybridization and the mechanism study

A highly efficient and stable ZnO–BiOBr composite photocatalyst was prepared by a facile one-pot solvothermal method. A variety of sophisticated techniques such as X-ray diffraction (XRD), X-ray photoemission spectroscopy (XPS), UV–Vis diffuse reflectance spectra, photoluminescence spectra and photoelectrochemical measurement, and so on were employed to characterize the materials. The as-prepared ZnO–BiOBr nanocrystalline showed strong photocatalytic activity for decomposition of methylene blue (MB), Orange II and biphenol A (BPA) under simulated visible light illumination. The possible working principle for the superior photocatalytic properties and reusability of the ZnO–BiOBr hybrid was surveyed to disclose contributions of various effects for the photoactivity enhancement. It was pointed out that *OH and holes take priority over ?O₂ ^? radicals in serving as the main oxidant in the reaction system. The experimental results indicated that the ZnO–BiOBr composite is highly photostable and valuable for real environmental applications.     

Ag/ZnO/ZnSe三元异质结的合成及其可见光光催化性能

以Ag纳米线为模板,通过两步水浴法合成了Ag/ZnO/ZnSe三元异质结光催化材料。利用场发射扫描电子显微镜(FESEM)、X射线能谱仪(EDS)、X射线衍射仪(XRD)以及透射电子显微镜(FETEM)对样品的形貌和结构进行了表征。结果显示,Ag/ZnO/ZnSe三元异质结为蠕虫状的Ag/ZnO二元异质结外镶嵌着ZnSe小颗粒。在可见光下,对比纯Ag纳米线、纯ZnO纳米球、Ag/ZnO异质结对罗丹明B的可见光降解效率,结果发现Ag/ZnO/ZnSe异质结表现出了更高的光催化效率。其光催化性能的提高主要是由于Ag/ZnO/ZnSe异质结的作用促使电子空穴对的分离,降低了电子空穴对的复合机率,从而提高了材料的光催化效率。     

Ag/BiOX (X=Cl,Br, I)复合光催化剂的制备、表征及其光催化性能

采用光化学沉积法制备了一系列不同Ag含量的新型Ag/BiOX(X=Cl,Br,I)复合光催化剂,应用X射线粉末衍射(XRD)、扫描电镜(SEM)、X射线光电子能谱(XPS)、光致发光(PL)谱、紫外-可见(UV-Vis)光谱和N2物理吸附等手段对催化剂进行表征,并以420nm<λ<660nm的可见光为光源,评价了该催化剂光催化降解酸性橙II的活性,考察了不同含量的Ag沉积对BiOX样品光催化性能的影响.N2物理吸附测试结果表明,沉积银在一定程度降低了催化剂的比表面积.UV-Vis测试结果表明,Ag能产生表面等离子共振吸收,有效增强BiOCl和BiOBr对可见光的吸收能力.PL测试结果则表明,Ag能显著抑制光生电子(e-)和空穴(h+)的复合.Ag的存在大幅度提高了BiOX对染料的光催化降解活性.当负载Ag的质量分数(w)为1%-2%时,可使BiOCl、BiOBr和BiOI光催化活性分别提高了10、13和2倍.Ag/BiOX复合光催化剂具有更高催化活性的原因是复合光催化剂对可见光有很强的吸收能力,同时产生了银等离子体光催化作用和银抑制了Ag/BiOX(X=Cl,Br,I)的光生电子-空穴的复合.     

WO3 Quantum Dots Decorated GO/Mg‐doped ZnO Composites for Enhanced Photocatalytic Activity under Nature Sunlight

Graphene oxide/Mg‐doped ZnO/tungsten oxide quantum dots composites (WQGOMZ) were prepared through co‐precipitation method, and were studied by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS), Fluorescence spectra (FL), and UV–vis diffuse reflection spectra. Furthermore, the photocatalytic activity of resultant WQGOMZ was evaluated under nature sunlight. Experimental results showed that WO₃QDs can remarkably heighten the photocatalytic activity of GOMZ composite, in which is nearly 6.58 times higher than that of GOMZ composite. Simultaneously, WQGOMZ composites possess optical memory ability and maintain high photocatalytic stability for more than 40 days. The enhanced photocatalytic activity and optical memory ability are attributed to the effective synergistic effect between ZnO and WO₃QDs.     

One‐Pot Synthesis,Characterization, and Enhanced Photocatalytic Activity of a BiOBr–Graphene Composite

Herein, a chemically bonded BiOBr–graphene composite (BiOBr–RG) was prepared through a facile in situ solvothermal method in the presence of graphene oxide. Graphene oxide could be easily reduced to graphene under solvothermal conditions, and simultaneously BiOBr nanoplates with pure tetragonal phase were grown uniformly on the graphene surface. The structure and photoelectrochemical properties of the resulting materials were characterized by transmission electron microscopy (TEM), X‐ray diffraction (XRD), Fourier‐transform infrared (FTIR) spectroscopy, Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and impedance and photocurrent action measurements. The combination of BiOBr and graphene introduces some properties of graphene into the photocatalysis reaction, such as excellent conductivity, adsorptivity, and controllability. A remarkable threefold enhancement in the degradation of rhodamine B (RhB) was observed with as‐prepared BiOBr–RG as compared with pure BiOBr under visible light (λ>420 nm). The enhanced photocatalytic activity could be attributed to the great adsorptivity of dyes, the extended photoresponse range, the negative shift in the Fermi level of BiOBr–RG, and the high migration efficiency of photoinduced electrons, which may effectively suppress the charge recombination.     

BiOBr microspheres for photocatalytic degradation of an anionic dye

BiOBr microspheres were obtained using a solvothermal synthesis route in the presence of ethylene glycol and KBr at 145 °C, for 18 h. BiOBr microspheres were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), nitrogen adsorption-desorption isotherms analysis, diffuse reflectance spectroscopy (DRS), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Additionally, the theoretical and experimental isoelectric points (IEP) of BiOBr nanostructured microspheres were determined, and pH's influence on the degradation of an anionic dye (methyl orange) under simulated solar radiation was analyzed. Results show that 97% of methyl orange is removed at pH 2 after 60 min of photocatalytic reaction. Finally, DRIFTS studies permit the proposal of a surface reaction mechanism of the photocatalytic oxidation of MO using BiOBr microspheres.