直接甲醇燃料电池阳极催化剂研究进展

 甲醇氧化电催化剂是决定直接甲醇燃料电池性能、寿命和成本的关键材料之一. 近年来人们从提高阳极催化剂活性和降低催化剂成本两个方面出发进行了大量的研究, 有力推动了直接甲醇燃料电池的发展. 在简要介绍电催化剂上甲醇氧化反应机理的基础上, 综述了近年来直接甲醇燃料电池阳极催化剂的研究进展, 从铂基催化剂、非铂基催化剂和催化剂载体三个方面进行了详细的介绍 (附有 58 篇参考文献), 并展望了甲醇电催化剂的发展趋势     

Highly graphitized carbon-wrapped PtFeCo alloy with enhanced durability and activity toward methanol electro-oxidation

Exploring efficient strategies to construct durable and active Pt-based electrocatalysts toward methanol oxidation reaction (MOR) remains great significance for the application of direct methanol fuel cells (DMFCs). Here, we report a facile pyrolysis procedure for fabricating carbon layer wrapped PtFeCo alloy nanoparticles supported on nitrogen-doped carbon nanotubes (NCNT). Physical characterizations demonstrate that the nitrogen-doped carbon support is highly graphitized and the PtFeCo particles are firmly wrapped by the graphitized carbon. Since the wrapping of highly graphitized carbon effectively prevents PtFeCo alloy from metal dissolution, the durability of the synthesized PtFeCo/Co–NCNT_a catalyst has been substantially improved, remaining about 76% of its initial mass activity after 1000 cycles of durability test in acid condition. In addition, due to the strain and ligand effects caused by alloying Pt with Fe and Co, the PtFeCo/Co–NCNT_a catalyst exhibits a greatly enhanced mass activity of 4.2-fold and a specific activity of 6.3-fold higher than those of commercial Pt/C-JM catalyst. Consequently, this work may provide an effective route for preparing durable and active Pt-based catalysts for methanol electro-oxidation.     

Facile Synthesis of PdCu Echinus‐Like Nanocrystals as Robust Electrocatalysts for Methanol Oxidation Reaction

Exploiting high‐performance and inexpensive electrocatalysts for methanol electro‐oxidation is conductive to promoting the commercial application of direct methanol fuel cells. Here, we present a facile synthesis of echinus‐like PdCu nanocrystals (NCs) via a one‐step and template‐free method. The echinus‐like PdCu NCs possess numerous straight and long branches which can provide abundant catalytic active sites. Owing to the novel nanoarchitecture and electronic effect of the PdCu alloy, the echinus‐like PdCu NCs display high electrocatalytic performance toward methanol oxidation reaction in an alkaline medium. The mass activity of echinus‐like PdCu NCs is 1202.1 mA mg_Pd^?1, which is 3.7 times that of Pd/C catalysts. In addition, the echinus‐like structure, as a kind of three‐dimensional self‐supported nanoarchitecture, endows PdCu NCs with significantly enhanced stability and durability. Hence, the echinus‐like PdCu NCs hold prospect of being employed as electrocatalysts for direct alcohol fuel cells.     

Highly Dispersed and Nano-sized Pt-based Electrocatalysts for Low-Temperature Fuel Cells

Among metals, Pt is so far the best material to be used as anode and cathode in low-temperature fuel cells. However, Pt has the drawback of being expensive and easily CO-poisoned. Thus, to produce useful electrocatalysts, significant efforts have been made worldwide on developing Pt-based catalysts with low Pt contents as well as searching for alternative materials with high catalytic activity for anodic and cathodic reactions in low-temperature fuel cells. This article presents the development of highly dispersed and nano-sized Pt-based electrocatalysts synthesized by several new methods based on our experimental results. In the case of anode materials, our proposed new method consists of the synthesis of Pt-based nanoparticles in order to maximize their surface availability, combined with the use of secondary metals that promote the oxidations of methanol and CO. On the other hand, for the cathode materials, the use of the Pt catalysts mixed with metal oxides enhances their oxygen reduction reaction (ORR) activity. We anticipate that the highly dispersed Pt-based nanoparticles introduced in this article will improve the performance of anode and cathode for low-temperature fuel cells.     

Pd/C promoted by Au for 2-propanol electrooxidation in alkaline media

Pd/C catalysts promoted by Au are investigated as electrocatalysts for the direct 2-propanol fuel cells in alkaline media. The results show that Pd is a good electrocatalyst for 2-propanol oxidation and the activity for 2-propanol electrooxidation is higher than that for methanol electrooxidation on the Pd/C electrocatalysts in alkaline media. Addition of Au can significantly increase the palladium catalytic activity and stability for the 2-propanol oxidation. PdAu4:1/C has higher electrocatalytic activity and better stability for the electrooxidation of 2-propanol than Pd/C and E-TEK Pt/C electrocatalysts. The present study shows the promising properties of Au promoted Pd/C as effective electrocatalysts for 2-propanol fuel based direct alcohol fuel cells.     

Composited hybrid electrocatalysts of Pt-based nanoparticles and nanowires for low temperature polymer electrolyte fuel cells

A new and highly improved electrocatalytic system of a composited hybrid electrode with Pt-based nanoparticles (NPs) and nanowires (NWs) is reported for low temperature polymer electrolyte fuel cells. Pt-based NWs have been realized as an option that can provide facile charge transport with a high activity for oxidation of fuels, for overcoming the disadvantages of Pt-based NPs as the state-of-the-art electrocatalysts. Moreover, a network-like electrode structure using the anisotropic morphology of Pt-based NWs can also supply efficient mass transport and mitigate uneconomical use of Pt by reducing embedded catalyst particles. Herein, we demonstrate that an advanced and very efficient hybrid structure of electrode, composited with highly-dispersed Pt-based NPs and NWs, shows significantly improved performances both in the CH₃OH-fueled and H₂-fueled fuel cells via synergistic effects by integrating advantages of two different morphologies.     

Methanol and ethanol electrooxidation on Pt and Pd supported on carbon microspheres in alkaline media

Noble metal (Pt, Pd) electrocatalysts supported on carbon microspheres (CMS) are used for methanol and ethanol oxidation in alkaline media. The results show that noble metal electrocatalysts supported on carbon microspheres give better performance than that supported on carbon black. It is well known that palladium is not a good electrocatalyst for methanol oxidation, but it shows excellently higher activity and better steady-state electrolysis than Pt for ethanol electrooxidation in alkaline media. The results show a synergistic effect by the interaction between Pd and carbon microspheres. The Pd supported on carbon microspheres in this paper possesses excellent electrocatalytic properties and may be of great potential in direct ethanol fuel cells.     

直接甲醇燃料电池催化剂性能的影响因素

考察了温度、电位及中间产物等因素对直接甲醇燃料电池催化剂性能的影响.结果表明,温度的升高会显著促进Pt催化剂粒子的聚结.对于PtRu催化剂,Ru氧化物/水合氧化物对Pt微晶的聚结具有抑制作用.高温放电实验后,PtRu催化剂的合金化程度有所提高.高电位会加速电催化剂的降解.电极反应中间产物甲酸和甲醛对甲醇电催化氧化反应具有一定的抑制作用,其中甲醛的影响更大.     

Recent advances in one-dimensional nanostructures for energy electrocatalysis

Catalysts play decisive roles in determining the energy conversion efficiencies of energy devices. Up to now, various types of nanostructured materials have been studied as advanced electrocatalysts. This review highlights the application of one-dimensional (1D) metal electrocatalysts in energy conversion, focusing on two important reaction systems—direct methanol fuel cells and water splitting. In this review, we first give a broad introduction of electrochemical energy conversion. In the second section, we summarize the recent significant advances in the area of 1D metal nanostructured electrocatalysts for the electrochemical reactions involved in fuel cells and water splitting systems, including the oxygen reduction reaction, methanol oxidation reaction, hydrogen evolution reaction, and oxygen evolution reaction. Finally, based on the current studies on 1D nanostructures for energy electrocatalysis, we present a brief outlook on the research trend in 1D nanoelectrocatalysts for the two clean electrochemical energy conversion systems mentioned above.     

Aerosol-derived Ni(1-x)Zn(x) electrocatalysts for direct hydrazine fuel cells

This article reports the synthesis and performance of unsupported Ni(1-x)Zn(x) electrocatalysts for the oxidation of hydrazine in alkaline media. Characterization of these catalysts was achieved using XRD, SEM, and TEM to confirm phase compositions, crystal structures, and morphologies. High performance was observed for the α-Ni(0.87)Zn(0.13) and β(1)-Ni(0.50)Zn(0.50) electrocatalysts with an onset potential of -0.15 V (vs. RHE) and a mass activity of 4000-3800 A g(cat)(-1) at 0.4 V (vs. RHE), respectively. Additionally, in situ IRRAS studies were conducted to understand the mechanism of oxidation. These results demonstrate the feasibility of Ni(1-x)Zn(x) catalysts for direct hydrazine anionic fuel cells.     

直接甲醇燃料电池阳极电催化剂

直接甲醇燃料电池作为未来清洁的动力能源，由于具有下列优点：操作温度低(<100℃)、燃料易储存和运输、能量效率高、污染低和燃料启动快而受到人们广泛的关注。阳极电催化剂是直接甲醇燃料电池最重要的组成部分。本文综述了近三年来直接甲醇燃料电池阳极电催化剂最新的研究进展，主要对催化剂制备方法、新型碳载体材料、催化剂类型作了详细的评述，展望了未来甲醇电催化氧化催化剂的发展，指出了电催化剂面临的问题。     

Nanoparticle size effects on methanol electrochemical oxidation on carbon supported platinum catalysts

The particle size effect observed on the performance of Pt/C electrocatalysts toward the methanol oxidation reaction (MOR) has been investigated with differential electrochemical mass spectrometry (DEMS). The investigation has been conducted under both potentiodynamic and potentiostatic conditions as research on methanol electrochemical oxidation is closely related to interest in direct methanol fuel cells. The particle size effect observed on the MOR is commonly regarded as a reflection of different Pt-CO and Pt-OH bond strengths for different particle sizes. This work focuses mainly on the mechanism of methanol dehydrogenation on platinum which is central to the problem of the optimization of the efficiency of methanol electro-oxidation by favoring the CO(2) formation pathway. It was found that the partitioning of the methanol precursor among the end products on supported platinum nanoparticles is strongly dependent on particle size distribution. Also, it is postulated that the coupling among particles of different sizes via soluble products must be considered in order to understand the particle size effects on the observed trends of product formation. An optimum particle size range for efficiently electro-oxidizing methanol to CO(2) was found between 3 and 10 nm, and loss in efficiency is mostly related to the partial oxidation of methanol to formaldehyde on either too small or too large particles. The possible reasons for these observations are also discussed.     

High stability three-dimensional porous PtSn nano-catalyst for ethanol electro-oxidation reaction

In addition to the theoretical research, direct ethanol fuel cells have great potential in practical applications. The performance of direct ethanol fuel cells largely depends on the electrocatalysts. Pt-based electrocatalysts have been promising candidates for advancing direct ethanol fuel cells for its high catalytic activity and great durability. Here, a PtSn catalyst with unique three-dimensional porous nanostructure has been designed and synthesized via a two-step liquid phase reduction reaction. Sn formed a self-supporting framework in PtSn alloy particles (∼3.5 nm). In ethanol electro-oxidation reaction, the PtSn catalyst exhibited high mass activity and excellent recycling time compared with that of Pt/C. After the morphology characterization before and after potential cycling, the PtSn alloy-based nano-catalyst showed good stability. The PtSn catalysts effectively avoid structural instability due to the external carriers, and prolong the leaching time of Sn. In addition, the introduction of a certain amount of Sn can also solve the poisoning phenomenon of active sites on Pt surface. The design strategy of porous alloy nano-catalyst sheds light on its applications in direct ethanol fuel cells.     

Revealing the Effect of Surface Composition on Multiwalled Carbon Nanotubes Supported Pt-Fe Alloy Electrocatalysts for Methanol Oxidation Performance

The designs of efficient and inexpensive Pt-based catalysts for methanol oxidation reaction (MOR) are essential to boost the commercialization of direct methanol fuel cells. Here, the highly catalytic performance PtFe alloys supported on multiwalled carbon nanotubes (MWCNTs) decorating nitrogen-doped carbon (NC) have been successfully prepared via co-engineering of the surface composition and electronic structure. The Pt₁Fe₃@NC/MWCNTs catalyst with moderate Fe³⁺ feeding content (0.86 mA/mg_Pt) exhibits 2.26-fold enhancement in MOR mass activity compared to pristine Pt/C catalyst (0.38 mA/mg_Pt). Furthermore, the CO oxidation initial potential of Pt₁Fe₃@NC/MWCNTs catalyst is lower relative to Pt/C catalyst (0.71 V and 0.80 V). Benefited from the optimal surface compositions, the anti-corrosion ability of MWCNT, strong electron interaction between PtFe alloys and MWCNTs and the N-doped carbon (NC) layer, the Pt₁Fe₃@NC/MWCNTs catalyst presents an improved MOR performance and anti-CO poisoning ability. This study would open up new perspective for designing efficient electrocatalysts for the DMFCs field.     

Synthesis of Pt and Pt-Fe nanoparticles supported on MWCNTs used as electrocatalysts in the methanol oxidation reaction

This work reports a feasible synthesis of highly-dispersed Pt and Pt-Fe nanoparticles supported on multiwall carbon nanotubes （MWCNTs） without Fe and multiwall carbon nanotubes with iron （MWCNTs-Fe） which applied as electrocatalysts for methanol electrooxidation. A Pt coordination complex salt was synthesized in an aqueous solution and it was used as precursor to prepare Pt/MWCNTs, Pt/MWCNTs-Fe, and Pt-Fe/MWCNTs using FeC12.4H20 as iron source which were named S 1, S2 and S3, respectively. The coordination complex of platinum （TOA）2PtC16 was obtained by the chemical reaction between （NH4）2PtC16 with tetraoctylammonium bromide （TOAB） and it was characterized by FT-IR and TGA. The materials were characterized by Raman spectroscopy, SEM, EDS, XRD, TEM and TGA. The electrocatalytic activity of Pt-based supported on MWCNTs in the methanol oxidation was investigated by cyclic voltammetry （CV） and chronoamperometry （CA）. Pt-Fe/MWCNTs electrocatalysts showed the highest electrocatalytic activity and stability among the tested electrocatalysts due to that the addition of ＂Fe＂ promotes the OH species adsorption on the electrocatalyst surface at low potentials, thus, enhancing the activity toward the methanol oxidation reaction （MOR）.     

铂基金属间化合物纳米晶的最新进展:可控合成与电催化应用

铂基金属间化合物纳米晶因其高度有序的结构特点,优异的抗氧化及耐腐蚀性能,作为电极材料被广泛应用于各类电催化反应,目前已有的PtCo金属间化合物纳米晶在燃料电池阴极反应(氧还原反应)中的活性和稳定性均达到了美国能源部(DOE) 2020年的目标。为了进一步提高金属间化合物纳米晶的电催化性能,需要对影响纳米晶电催化性能的因素进行深入研究。本文综述了铂基金属间化合物纳米晶的研究现状,着重介绍了铂基金属间化合物的可控合成策略及其在电催化领域的最新研究进展,分析总结了该领域存在的问题,并展望了其未来发展方向。     

Efficient Direct‐Methanol Fuel Cell Based on Graphene Quantum Dots/Multi‐walled Carbon Nanotubes Composite

Direct‐methanol fuel cells are proton‐exchange fuel cell in which methanol is used as the fuel. The important advantage of these fuel cells is the simplicity of transport and storage of methanol. In this study, methanol fuel cell electrocatalysts including graphene quantum dots (GQDs), functionalized multi‐walled carbon nanotubes (f‐MWCNTs) and GQDs/f‐MWCNTs composite were synthesized. The structures of synthesized electrocatalysts were highlighted by scanning electron microscope (SEM), raman spectroscopy, UV–vis spectroscopy, fourier transform infrared spectroscopy (FTIR), electrochemical impedance spectroscopy (EIS) and x‐ray diffraction (XRD) method. After that, the effective surface areas (ESA) of GQDs, f‐MWCNTs and GQDs/f‐MWCNTs were calculated. Finally, GQDs/f‐MWCNTs composite modified glassy carbon electrode (GQDs/f‐MWCNTs/GCE) showed highest current signals for methanol oxidation than those of comparable GQDs/GCE and f‐MWCNTs/GCE.     

High-Performance Bismuth-Doped Nickel Aerogel Electrocatalyst for the Methanol Oxidation Reaction

Low-cost, non-noble-metal electrocatalysts are required for direct methanol fuel cells, but their development has been hindered by limited activity, high onset potential, low conductivity, and poor durability. A surface electronic structure tuning strategy is presented, which involves doping of a foreign oxophilic post-transition metal onto transition metal aerogels to achieve a non-noble-metal aerogel Ni₉₇Bi₃ with unprecedented electrocatalytic activity and durability in methanol oxidation. Trace amounts of Bi are atomically dispersed on the surface of the Ni₉₇Bi₃ aerogel, which leads to an optimum shift of the d-band center of Ni, large compressive strain of Bi, and greatly increased conductivity of the aerogel. The electrocatalyst is endowed with abundant active sites, efficient electron and mass transfer, resistance to CO poisoning, and outstanding performance in methanol oxidation. This work sheds light on the design of high-performance non-noble-metal electrocatalysts.     

Hollow PtPd Nanorods with Mesoporous Shells as an Efficient Electrocatalyst for the Methanol‐Oxidation Reaction

Tailoring the morphology and composition of platinum‐based electrocatalysts is of significant importance for the development of highly efficient direct methanol fuel cells. Herein, we report a dual‐templating method for the design of hollow PtPd nanorods with mesoporous shells (mPtPd HNRs). We found that F127 micelles favored the formation of mesoporous structures and that SiO₂ nanorods served as a hard template for the creation of cavities. The well‐developed mesopores, hollow structures, and bimetallic composition of the mPtPd HNRs afforded a sufficient number of active sites to facilitate the electrochemical oxidation of methanol, thereby leading to enhanced activity and stability. This strategy allowed for the reliable preparation of mesoporous hollow platinum‐based electrocatalysts with desired compositions and morphologies for catalytic applications.     

Fe-N-C 类催化剂在碱性燃料电池中的研究进展

随着阴离子交换膜的出现、发展和应用,碱性燃料电池的优势日趋明显,针对碱性燃料电池的研究也更广泛而深刻. 在碱性燃料电池中,除了其固有的对催化剂的高包容性和动力学优越性,阴离子交换膜让阴离子定向迁移,从而实现了很好的水相管理,降低了电池中“水涝”的几率,也提供了更广阔的燃料选择空间. 氧还原反应是碱性燃料电池中的重要部分,且其反应动力学相较于氢氧化反应缓慢. 因此,选择并研制合适的阴极氧还原反应催化剂,是提高碱性燃料电池性能和促进燃料电池规模化使用的关键. Fe-N-C类催化剂因其在碱性条件下接近甚至优于 Pt 基催化剂的性能,被视为最有潜力替代 Pt 的非贵金属催化剂. 本文从近 5 年来 Fe-N-C 类催化剂的合成方法、催化活性位点和氧还原反应机理以及在燃料电池中的应用三方面进行了综述.