Volcano correlations between formal potential and Hammett parameters of substituted cobalt phthalocyanines and their activity for hydrazine electro-oxidation

In this work we have examined the effect of the Co(II)/(I) formal potential of cobalt phthalocyanines (CoPcs) on their catalytic activity for the electro-oxidation of hydrazine. The activity of the different phthalocyanines was examined using these complexes adsorbed on graphite electrodes. When activities for the different metal chelates are compared as a plot of logI (at constant potential) versus the Co(II)/(I) formal potential an asymmetric volcano curve is obtained. For some complexes the rate of the reaction increases very sharply with the driving force of the catalyst (measured as its formal potential) and then it decreases for higher driving forces. The same plot is obtained when plotting log I versus the sum of the Hammett parameters of the substituents on the periphery of the phthalocyanine ring.     

Volcano correlations for the reactivity of surface-confined cobalt N<Subscript>4</Subscript>-macrocyclics for the electrocatalytic oxidation of 2-mercaptoacetate

We have investigated the electrocatalytic activity of several substituted and unsubstituted cobalt–phthalocyanines of substituted tetraphenyl porphyrins and of vitamin B₁₂, for the electro-oxidation of 2-mercaptoacetate, with the complexes pre-adsorbed on a pyrolytic graphite electrode. Several N4-macrocyclic were used to have a wide variety of Co(II)/(I) formal potentials. The electrocatalytic activity, measured as current at constant potential, increases with the Co(II)/(I) redox potential for porphyrins as Co–pentafluorotetraphenylporphyrin < Co–tetrasulfonatotetraphenylporphyrin < Co-2,2′,2″,2‴tetra-aminotetraphenylporphyrin and decreases for cobalt phthalocyanines as Co-3,4-octaethylhexyloxyphthalocyanine > Co–octamethoxyphthalocyanine > Co–tetranitrophthalocyanine Co–tetraaminophthalocyanine > Co–unsubstituted phthalocyanine > Co–tetrasulfonatophthalocyanine > Co–perfluorinated phthalocyanine. Vitamin B₁₂ exhibits the maximum activity. A correlation of log I (at constant potential) versus the Co(II)/(I) formal potential of the catalysts gives a volcano curve. This clearly shows that the search for better catalysts for this reaction point to those N₄-macrocyclic complexes with Co(II)/(I) formal potentials close to −0.84 V versus SCE, which correspond to an optimum situation for the interaction of the thiol with the active site. Dedicated to Prof. Dr. Teresa Iwasita on the occasion of her 65th birthday in recognition of her numerous contributions to interfacial electrochemistry.     

Electrocatalytic oxidation and detection of hydrazine at gold electrode modified with iron phthalocyanine complex linked to mercaptopyridine self-assembled monolayer

Electrocatalytic oxidation and detection of hydrazine in pH 7.0 conditions were studied by using gold electrode modified with self-assembled monolayer (SAM) films of iron phthalocyanine (FePc) complex axially ligated to a preformed 4-mercaptopyridine SAMs. The anodic oxidation of hydrazine in neutral pH conditions with FePc-linked-mercaptopyridine-SAM-modified gold electrode occurred at low overpotential (0.35 V versus Ag|AgCl) and the treatment of the voltammetric data showed that it was a pure diffusion-controlled reaction with the involvement of one electron in the rate-determining step. The mechanism for the interaction of hydrazine with the FePc-SAM is proposed to involve the Fe^(III)Pc/Fe^(II)Pc redox process. Using cyclic voltammetry (CV) and Osteryoung square wave voltammetry (OSWV), hydrazine was detected over a linear concentration range of 1.3 × 10⁻⁵ to 9.2 × 10⁻⁵ mol/L with low limits of detection (ca. 5 and 11 μM for OSWV and CV, respectively). At concentrations higher than 1.2 × 10⁻⁴ mol/L the anodic peak potential shifted to 0.40 V (versus Ag|AgCl), and this was interpreted to be due to kinetic limitations resulting from the saturation of hydrazine and its oxidation products onto the redox-active monolayer film. This type of metallophthalocyanine-SAM-based electrode is a highly promising electrochemical sensor given its ease of fabrication, good catalytic activity, stability, sensitivity and simplicity.     

Synthesis,characterization and catalytic activity of peripherally tetra‐substituted Co(II) phthalocyanines for cyclohexene oxidation

New 3,3‐diphenylpropoxyphthalonitrile (5) was obtained from 3,3‐diphenylpropanol (3) and 4‐nitrophthalonitrile (4) with K₂CO₃ in DMF at 50 °C. The novel cobalt(II) phthalocyanine complexes, tetrakis‐[2‐(1,4‐dioxa‐8‐azaspiro[4.5]dec‐8‐yl)ethoxy] phthalocyaninato cobalt(II) (2) and tetrakis‐(3,3‐diphenylpropoxy)phthalocyaninato cobalt(II) (6) were prepared by the reaction of the phthalonitrile derivatives 1 and 5 with CoCl₂ by microwave irradiation in 2‐(dimethylamino)ethanol for at 175 °C, 350 W for 7 and 10 min, respectively. These new cobalt(II)phthalocyanine complexes were characterized by spectroscopic methods (IR, UV–visible and mass spectroscopy) as well as elemental analysis. Complexes 2 and 6 are employed as catalyst for the oxidation of cyclohexene using tert‐butyl hydroperoxide (TBHP), m‐chloroperoxybenzoic acid (m‐CPBA), aerobic oxygen and hydrogen peroxide (H₂O₂) as oxidant. It is observed that both complexes can selectively oxidize cyclohexene to give 2‐cyclohexene‐1‐ol as major product, and 2‐cyclohexen‐1‐one and cyclohexene oxide as minor products. TBHP was found to be the best oxidant since minimal destruction of the catalyst, higher selectivity and conversion were observed in the products. Copyright © 2012 John Wiley & Sons, Ltd.     

Enhancement of the analytical properties and catalytic activity of a nickel hexacyanoferrate modified carbon ceramic electrode prepared by two-step sol-gel technique: application to amperometric detection of hydrazine and hydroxyl amine

The electroless sol-gel technique was used for the construction of nickel hexacyanoferrat (NiHCF) modified carbon composite electrodes (CCEs).This involves two steps: formation of a carbon ceramic electrode fabricated by nickel powder and then immersing the electrode into a sodium- hexacyanoferate solution for the immobilization of NiHCF films. The cyclic voltammety of the resulting modified CCEs prepared under optimum conditions, shows a well defined surface redox couple due to the [Ni^IIFe^III/II(CN)₆]^−2/−1 system. The effect of different alkali metal cations in supporting electrolyte on the behavior of the modified electrode were studied. The charge transfer coefficient (α) and charge transfer rate constant (k_s) for modified films were calculated. Hydrazine and hydroxylamine have been chosen as a model to elucidate the electocatalytic ability and analytical parameters of NiHCF modified CCE prepared by one and two-step sol-gel techniques and these compounds determined amperometically at the surface of modified electrodes. The latter shows a good electocatalytic activity towards the oxidation of hydrazine and hydroxylamine in the pH range 3-8 in comparison with CCEs modified by homogeneous mixture of graphite powder, Ni(NO₃)₂ and Na₂[Fe(CN)₆], (one-step sol-gel technique). Furthermore, the catalytic rate constant, linear dynamic range, limit of detection, and sensitivity for hydrazine and hydroxylamine detections were evaluated and compared with CCEs prepared with one-step sol-gel method. The modified CCEs containing NiHCF shows good repeatability, short response time, t 90%<3 s, long term stability (3 months) and excellent catalytic activity. Furthermore, the method of preparation is rapid and simple and the modified electrodes are renewed by simple mechanical polishing and immersing in [Na₃Fe(CN]₆] solution.     

New indenyl phosphinooxazoline complexes of iron and their catalytic activity in the Mukaiyama aldol reaction

New phosphinooxazoline (PHOX) η⁵-indenyl complexes of iron were synthesized and applied as catalysts in the Mukaiyama aldol reaction. Reaction of three different PHOX ligands with [Fe(η⁵-Ind)I(CO)₂] afforded the iodide salts of three complexes of the general formula [Fe(η⁵-Ind)(CO)(PHOX)]⁺ in 73-81% isolated yields. The molecular structure of one of the new complexes was determined, revealing a pseudo octahedral coordination geometry about the iron center. The iron complexes are catalytically active in the Mukaiyama aldol reaction between aldehydes and 1-(tert-butyldimethylsilyloxy)-1-methoxyethene to give the corresponding aldol adducts (3 mol % catalyst, 15 min, room temperature, 48-83% isolated yields). A previously synthesized iron complex of the general formula [Fe(η⁵-Cp)(CO)(PHOX)]⁺ was found to be catalytically active in the title reaction as well, but needed three hours at room temperature to convert the starting materials to the products.     

Theoretical study of correlations between the coordination structures and catalytic activities in polymer-stabilized au nanocluster catalysts

Au nanoclusters (Au NCs) stabilized by poly(N-vinyl-2-pyrrolidone) and poly(allylamine), abbreviated to Au:PVP and Au:PAA, catalyze the aerobic oxidation of p-hydroxybenzyl alcohols, but the catalytic activity of Au:PVP is much higher than that of Au:PAA. To elucidate the correlations between the catalytic activities and coordination structures of the stabilizing polymer, the substrate accessibility on Au NCs was estimated by density functional theory (DFT) and molecular dynamics (MD) calculations. For MD simulations, we applied a systematic method to optimize the temperature parameters in temperature replica exchange molecular dynamics (T-REMD), and the coordination structures were comprehensively classified by multivariate analysis. The results show that the number of open active sites on the Au NCs is a good index for predicting the catalytic activities. © 2018 Wiley Periodicals, Inc.     

碳纳米管负载的纳米Pd-Ag催化剂对乙醇和丙醇氧化的电化学活性

在乙二醇和水混合溶剂中,采用硼氢化钠还原的方法制备了多壁碳纳米管（MWCNT）负载的Pd和Pd-Ag纳米颗粒催化剂;在碱性介质中,用循环伏安法测试了这些催化剂对乙醇、正丙醇和异丙醇的电氧化性能。结果表明,Pd和Pd-Ag纳米颗粒均匀地分散在MWCNT表面;Pd/MWCNT、Pd₄Ag₁/MWCNT、Pd₂Ag₁/MWCNT和Pd₁Ag₁/MWCNT催化剂上金属颗粒的平均粒径分别为7、4、7和11 nm。相比乙醇和异丙醇,所制备的催化剂对正丙醇的氧化表现出较大的电流密度。与Pd/MWCNT催化剂相比,双金属Pd_nAg₁/MWCNT（n=4、2、1）催化剂,尤其是Pd₄Ag₁/MWCNT上的电流密度更大,表明Ag的加入提高了Pd催化剂对醇氧化的电化学活性,其原因是因为醇氧化过程所产生的中间体物种在双金属Pd-Ag/MWCNT催化剂上的吸附力有所减弱。     

Relationship between Pt particle size and catalyst activity for catalytic oxidation of ultrahigh‐concentration formaldehyde

The effects of particle size and kinetics of Pt/activated carbon (AC) catalysts on catalytic oxidation of formaldehyde (HCHO) were investigated. AC, f‐SiO₂ and MCM‐41 were used as supports to prepare low‐Pt‐content catalysts using H₂ reduction. Pt/AC catalyst shows the highest activity with the largest Pt particle size. By contrast, 0.1 wt% Pt/AC reduced using KBH₄ has much higher activity than that reduced using H₂, which can oxidize HCHO completely over 6000 ppm at 60°C in a fixed bed reactor. Transmission electron microscopy and X‐ray photoelectron spectroscopy results indicate that Pt/AC‐KBH₄ has larger Pt particles and lower valence state than Pt/AC‐H₂, which may be attributed to the ligand effect between Pt⁴⁺ and the AC support. The result of O₂ temperature‐programmed oxidation suggests that highly dispersed Pt⁴⁺ ions have stronger interaction with AC support and thus are harder to be reduced by H₂. Furthermore, Pt/AC is structure‐sensitive and larger‐sized Pt particles result in a high conversion of HCHO. Investigation of kinetics indicated that it is a zero‐order reaction for such a high HCHO concentration condition for Pt/AC‐KBH₄.     

负载金催化剂上CO氧化反应活性与金属氧化物载体中金属-氧结合能之间的关系

讨论了金属氧化物载体(MOx)对其负载纳米金催化剂(Au/MOx)上CO氧化反应的影响。采用典型的共沉淀法和沉积-沉淀法在完全相同的焙烧条件下制备了一系列MOx负载金催化剂,以CO氧化转化50%时的反应温度(T1/2)定量评价了MOx载体和Au/MOx催化剂的催化活性。进一步将MOx载体与相应Au/MOx催化剂的T1/2值之差对MOx载体的金属-氧结合能做曲线进行关联,发现二者呈明显的火山型关系。这一结果表明,采用具有适当金属-氧结合能(300–500 atom O)的MOx可大大提高沉积于其上的Au纳米颗粒的催化活性。     

How does the strength of exchange interactions in iron oxides influence the EPR line intensity and the catalytic activity?

Fe(III) ions may form ordered domains wherein the EPR resonance extends to the whole particle volume, leading to a major increase of spectral line intensities. This phenomenon of “strong exchange“ is known as ferromagnetic resonance (fmr). The authors observed another type of exchange, a weak one, characterized by drastically reduced resonances. Interestingly, both exchanges run parallel (up- or downwards) with the catalytic activity of iron oxide nano-particles as catalysts in the N₂O-mediated selective oxidation of benzene.     

Fabrication and characterization of Meldola's blue/zinc oxide hybrid electrodes for efficient detection of the reduced form of nicotinamide adenine dinucleotide at low potential

We report the synthesis and the electrochemical properties of hybrid films made of zinc oxide (ZnO) and Meldola's blue dye (MB) using cyclic voltammetry (CV). MB/ZnO hybrid films were electrochemically deposited onto glassy carbon, gold and indium tin oxide-coated glass (ITO) electrodes at room temperature (25 ± 2 °C) from the bath solution containing 0.1 M Zn(NO₃)₂, 0.1 M KNO₃ and 1 × 10⁻⁴ M MB. The surface morphology and deposition kinetics of MB/ZnO hybrid films were studied by means of scanning electron microscopy (SEM), atomic force microscopy (AFM) and electrochemical quartz crystal microbalance (EQCM) techniques, respectively. SEM and AFM images of MB/ZnO hybrid films have revealed that the surfaces are well crystallized, porous and micro structured. MB molecules were immobilized and strongly fixed in a transparent inorganic matrix. MB/ZnO hybrid films modified glassy carbon electrode (MB/ZnO/GC) showed one reversible redox couple centered at formal potential (E⁰′) −0.12 V (pH 6.9). The surface coverage (Γ) of the MB immobilized on ZnO/GC was about 9.86 × 10⁻¹² mol cm⁻² and the electron transfer rate constant (ks) was determined to be 38.9 s⁻¹. The MB/ZnO/GC electrode acted as a sensor and displayed an excellent specific electrocatalytic response to the oxidation of nicotinamide adenine dinucleotide (NADH). The linear response range between 50 and 300 μM NADH concentration at pH 6.9 was observed with a detection limit of 10 μM (S/N = 3). The electrode was stable during the time it was used for the full study (about 1 month) without a notable decrease in current. Indeed, dopamine (DA), ascorbic acid (AA), acetaminophen (AP) and uric acid (UA) did not show any interference during the detection of NADH at this modified electrode.     

The variation of coordination modes of aromatic imines in iron carbonyl complexes: Is there a correlation between bond lengths in organometallic model compounds and the reactivity of the ligands in catalytic C-C bond formation reactions?

The reaction of aromatic imines with Fe₂(CO)₉ proceeds via a two-step reaction sequence. A C-H activation reaction in ortho-position with respect to the exocyclic imine function is followed by an intramolecular hydrogen transfer reaction towards the former imine carbon atom. The resulting dinuclear iron carbonyl complexes show an aza-ferra-cyclopentadiene ligand which is apically coordinated by the second iron tricarbonyl moiety. Comparing the bond lengths of 43 different compounds, which were synthesized and structurally characterized in our group shows that the iron iron bond length correlates with one of the iron carbon bond lengths. The longer the iron carbon bond between the apically coordinated iron atom and the carbon atom next to the former imine carbon atom is, the shorter is the iron iron bond. The same ligands may be used as the substrates in ruthenium catalyzed C-C bond formation reactions. Whereas most of the imines react via the formal insertion of CO and/or ethylene into the C-H bond in ortho-position to the imine function, the ligands that show the longest iron carbon bond lengths in the model compounds under the same reaction conditions produce different types of isoindolones.     

New peripherally tetra-[trans-3,7-dimethyl-2,6-octadien-1-ol] substituted metallophthalocyanines: synthesis,characterization and catalytic activity studies on the oxidation of phenolic compounds

In this paper, we elucidated the synthesis, characterization, and investigation of catalytic activity studies of new metallophthalocyanines 4 and 5 as the catalyst for phenolic compounds oxidation by trying different types of oxygen sources. The structural characterization of the products was made by a combination of elemental analysis, FT-IR, LC-MS/MS (for phthalonitrile derivative 3), MALDI-TOF mass spectral data (for metallophthalocyanines 4–7), UV–vis spectroscopy (for metallophthalocyanines 4–7), ¹H NMR and ¹³C NMR spectroscopies (for compounds 3 and 6). The synthetic routes for the (trans-3,7-dimethyl-2,6-octadien-1-ol) substituted phthalonitrile derivative 3 and corresponding metallophthalocyanines 4–7 are outlined in Scheme 1. The MPc complexes 4–7 were synthesized via cyclotetramerization of compound 3 in the presence of the corresponding anhydrous metal salts (CoCl₂ for 4, CuCl₂ for 5, Zn(CH₃COO)₂ for 6 and MnCl₂ for 7) in dry n-pentanol as solvent and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as strong base at reflux temperature under nitrogen gas. Phthalocyanines and their metal complexes, in general, display poor solubility in most of the organic solvents, however, the synthesized metallophthalocyanine complexes 4–7 were highly soluble in common organic solvents because of the introduction of the methyl groups on alkyl chains of peripheral arms. The catalytic activity of compounds 4 and 5 was evaluated for the oxidation of phenolic compounds such as 4-nitrophenol, o-chlorophenol, 2,3-dichlorophenol, and p-methoxyphenol. CoPc 4 displayed good catalytic performance with a full oxidation of 4-nitrophenol into the corresponding benzoquinone and hydroquinone with the highest TON and TOF values within 3 h.     

Axial base‐controlled catalytic activity,oxidative stability and product selectivity of water‐insoluble manganese and iron porphyrins for oxidation of styrenes in water under green conditions

A series of water‐insoluble iron(III) and manganese(III) porphyrins, FeT(2‐CH₃)PPCl, FeT(4‐OCH₃)PPCl, FeT(2‐Cl)PPCl, FeTPPCl, MnT(2‐CH₃)PPOAc, MnT(4‐OCH₃)PPOAc, MnT(2‐Cl)PPOAc and MnTPPOAc, in the presence of imidazole (ImH), F^?, Cl^?, Br^? and acetate were used as catalysts for the aqueous‐phase heterogeneous oxidation of styrenes to the corresponding epoxides and aldehydes with sodium periodate. Also, the effect of various reaction parameters such as reaction time, molar ratio of catalyst to axial base, type of axial base, molar ratio of olefin to oxidant and nature of metal centre on the activity and oxidative stability of the catalysts and the product selectivity was investigated. Higher catalytic activities were found for the iron complexes. Interestingly, the selectivity towards the formation of epoxide and aldehyde (or acetophenone) was significantly influenced by the type of axial base. Furthermore, Br^? and ImH were found to be the most efficient co‐catalysts for the oxidation of olefins performed in the presence of the manganese and iron porphyrins, respectively. The optimized molar ratio of catalyst to axial base was different for various axial bases. Also, the order of co‐catalyst activity of the axial bases obtained in aqueous medium was different from that reported for organic solvents. The use of a convenient axial base under optimum reaction catalyst to co‐catalyst molar ratio in the presence of the manganese porphyrin gave the oxidative products with a conversion of ca 100% in a reaction time of less than 3 h. However, the catalytic activity of the iron porphyrins could not be effectively improved by increasing the catalyst to co‐catalyst molar ratio.     

Catalyst parameters determining activity and selectivity of supported gold nanoparticles for the aerobic oxidation of alcohols: the molecular reaction mechanism

As previously reported for for solventless reactions, gold nanoparticles supported on ceria are also excellent general heterogeneous catalysts for the aerobic oxidations of alcohols in organic solvents. Among organic solvents it was found that toluene is a convenient one. A systematic study on the influence of the particle size and gold content on the support has established that the activity correlates linearly with the total number of external gold atoms, and with the surface coverage of the support. Amongst catalysts with different supports, but similar gold particle size and content, gold on ceria exhibits the highest activity. By means of a kinetic study (influence of sigma+ parameter, kinetic isotopic effect, temperature, alcohol concentration and oxygen pressure) a mechanistic proposal consisting of the formation of metal-alcoholate, beta-hydride shift from carbon to metal and M--H oxidation has been proposed that explains all experimental results.     

Enhanced catalytic activity of composites of NiFe2O4 and nano cellulose derived from waste biomass for the mitigation of organic pollutants

This study reports facile in situ synthesis of magnetically retrievable nanocomposites of nanocellulose (derived from waste biomass) and NiFe₂O₄ nanoparticles using hydrothermal method. The synthesized nanocomposites were characterized using various techniques such as FT-IR, powder XRD, HR-TEM, BET and VSM. The characterization of nanocomposites clearly revealed that NiFe₂O₄ nanoparticles were well dispersed on the surface of cellulose nanofibres. The catalytic performance of the synthesized nanocomposites was assessed for both the photocatalytic oxidation and reduction of organic pollutants. The prepared nanocomposites displayed excellent catalytic performance in comparison to pristine NiFe₂O₄ nanoparticles due to stabilization and increased dispersability of NiFe₂O₄ nanoparticles on the cellulose matrix. The present work promotes the use of bio based renewable sources to fabricate environment friendly materials to be used in the field of catalysis for the abatement of organic pollutants.     

Behaviors of H2TPP and CoTPPCl in Nafion® film and the catalytic activity for nitric oxide oxidation

The behavior of meso-tetraphenylporphyrin (H₂TPP) and its Co(III)-complex (CoTPPCl) in Nafion® film has been studied by cyclic voltammetry and visible spectroscopy. Buffer titration of H₄TPP²⁺ in the film showed only the dication–free-base equilibrium (H₄TPP²⁺H₂TPP + 2H⁺) and the apparent equilibrium constant, pK_3,4, was determined to be 4.12. Insertion of cobalt(III) into the H₂TPP core in the film has been realized at room temperature by immersion of H₂TPP-containing Nafion® film into CoCl₂ solution. The electrocatalytic activity of the resulting film toward NO oxidation at a glassy carbon (GC) electrode has been monitored in comparison with other Nafion® films doped with H₂TPP or free CoCl₂. A GC electrode coated with Nafion® film doped with CoTPPCl exhibited the highest catalytic activity, confirming the involvement of the Co site in a catalytic cycle of NO oxidation. In amperometric detection of NO in phosphate buffer solution at pH 7.4 this electrode demonstrated a linear response to the NO concentration increment. The detection limit at a signal-to-noise ratio of 3 was 1.2 nM.