弱磁场下低温中和法制备亚微米非晶态δ-FeOOH的研究

利用XRD和SEM分别对在弱磁场下通过低温中和法制备的羟基铁氧化物进行相成分和颗粒形貌分析. 试验结果表明: 无磁场下, 产物是由部分球形和部分针状的α-FeOOH组成. 0.1 T磁场下, 产物是纺锤形的γ-FeOOH, 但是, 其粒度分布很不均匀. 0.3 T磁场下, 产物是球形的Fe_1.833(OH)_0.5O_0.25. 0.5 T磁场下, 产物是100 nm左右的球形的非晶态δ-FeOOH. Fe_1.833(OH)_0.5O_0.25是无磁场下制备的α-FeOOH向弱磁场下制备的δ-FeOOH转变的中间产物. 并且, 亚微米球形Fe_1.833(OH)_0.5O_0.25和亚微米非晶态球形δ-FeOOH的粒度分布都很均匀. 此外, 弱磁场影响羟基铁氧化物的结晶度.     

The Influence of Dimensional Effects on the Composition and Properties of Polydicarbonfluoride

The influence of dimensional effects on the compositions and properties of polydicarbonfluoride (C₂F)_n prepared from multilayered graphenes was investigated. Multilayered graphenes were produced by destructive thermal decomposition of intercalation compounds of “idealized” (C₂F)_n that were obtained by reaction of gaseous ClF₃ with natural graphite at a room temperature. The precursors of multilayered graphenes have a common formula (C₂F?xR)_n where R is an organic or inorganic component. It was shown that polydicarbonfluoride prepared from multilayered graphene does not form stable intercalation compound with ClF₃, in contrast to polydicarbonfluoride prepared from graphite, that forms its intercalation compound with ClF₃ during fluorination of initial graphite in the ClF₃ excess. Investigations of polydicarbonfluoride prepared from multilayered graphene showed that it cannot form intercalation compounds with different classes of organic and inorganic compounds as polydicarbonfluoride prepared from graphite can do. The absence of such intercalation activity for polydicarbonfluoride prepared from multilayered graphene can be explained by high exfoliation degree of multilayered graphene (3–4 nm) along the c‐axis that results in the presence of two‐dimensional (2D) structure properties in multilayered graphene. Dimensional effects transformed the chemical properties of polydicarbonfluoride prepared from multilayered graphene and lowered its decomposition temperature by 150 K in comparison with polydicarbonfluoride prepared from graphite.     

非平衡凝固法制备金属间化合物SbSn的表面结构

锡-锑系统的研究由于其重要的的理论意义和应用价值而受到重视，但是各个相图之间并不是完全一致的。大部分对于金属间化合物SbSn的研究集中在平衡态，对于金属间化合物SbSn的结构研究尚存在着一些不同的看法，对于锡锑的相图和金属间化合物SbSn的晶体结构还需要进一步的研究。     

Green synthesis of biodegradable polyurethane and castor oil-based composite for benign transformation of methylene blue

A series of polyurethane (PU), polyethylene glycol (PEG) and castor oil (CO) (ricin) based foams (PU-PEG, PU-PEG₄₀/CO₆₀, PU-PEG₆₀/CO₄₀ and PU-CO) were prepared and their catalytic activity for removal of methylene blue (MB) dye was evaluated. The prepared foams were characterized by FTIR, SEM and TGA analysis. The foams were porous in nature and the thermal stability was improved with CO incorporation. The PU-CO furnished promising catalytic efficiency and PU-PEG, PU-CO, PU-PEG₄₀/CO₆₀ and PU-PEG₆₀/CO₄₀ removed MB dye completely within 33, 5, 12 and 20 min. The removal of MB dye over foams followed second order kinetic model. The reusability of PU-CO showed stability up to 10 runs. Moreover, the phytotoxicity of the treated dye solution was performed, which reduced significantly after dye solution treatment with prepared foams. The prepared PU-CO also showed biodegradable nature under soil natural conditions. The prepared PU based foams showed excellent catalytic potential for the removal of MB dye along with thermal stability and recyclability, which could be a potential class of materials for the remediation of dyes in effluents.     

制备方法对Co-MOR催化剂CH4选择还原NO性能的影响

采用离子交换法、浸渍法制备一系列的Co-MOR 催化剂, 并将其用于CH₄选择性催化还原 NO_x(CH₄-SCR)反应. 运用X 射线衍射(XRD)、X 射线荧光光谱(XRF)、扫描电子显微镜(SEM)、紫外-拉曼(UVRaman)光谱、X射线光电子能谱(XPS)、NO程序升温脱附(NO-TPD)等手段对催化剂进行了表征. 结果表明, 浸渍法制备的催化剂, Co以Co₃O₄形式存在; 而离子交换法制备的催化剂, Co以离子形式进入丝光沸石(MOR)骨架之中, 在催化剂上形成更多的Co²⁺和[Co-O-Co]²⁺, 形成更均匀NO吸附中心和CH₄-SCR反应活性中心. 催化剂活性评价表明离子交换法制备的催化剂具有更宽的活性温度区间, Co(0.30)-MOR 催化剂在327-450℃温度范围内NO转化率大于50%.     

Investigation of opto-dielectric properties of Ti-doped Ga2O3 thin films

Several Ti-incorporated Ga-oxide (Ga₂O₃) thin films with different amounts of Ti contents have been prepared by vacuum evaporation method on glass and silicon substrates. The Ti incorporation level was measured with energy dispersion X-ray spectroscopy (EDX) method. The crystalline structure of the prepared films was determined with X-ray diffraction method. Experimental data indicate that Ti⁴⁺ ions doped in host Ga₂O₃ form solid solutions (SS) even with so large Ti% content ∼10.4% wt. All the prepared solid solutions have the known orthorhombic (ɛ-phase) phase of Ga₂O₃. The doping controls the optical and electrical properties of the host Ga₂O₃. It was found that the bandgap of the prepared undoped Ga oxide is 5.23 eV, which was decreased monotonically with increasing of Ti doping level so that it is possible to engineer the bandgap. Furthermore, the electrical measurements show that with Ti doping, it is possible to turn the high-k Ga oxide into low-k dielectric material. The optical sensitivity of the capacitance, dissipation factor, and ac-conductance of the Ga₂O₃:Ti films grown on Si was studied as a function of Ti-doping level. It was observed that the prepared Ga₂O₃:Ti film with 6–10% doping level has the highest photosensitivity among the other samples.     

Facile combustion synthesis of Ag2O nanoparticles using cantaloupe seeds and their multidisciplinary applications

Silver oxide nanoparticles (Ag₂O NPs) were prepared using cantaloupe (Cucumis melo) seeds as a fuel by employing a green synthesis method. The prepared Ag₂O NPs were investigated using powder X-ray diffraction (PXRD), UV–visible spectrum, Fourier transform infrared analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM) with energy-dispersive spectroscopy, and photoluminescence studies. PXRD data reveal the establishment of cubic crystal structure of Ag₂O NPs. According to SEM and TEM results, the morphology of the prepared NPs was agglomerated and spherical. The photodegradation activity of the prepared Ag₂O NPs over methylene blue dye was promising under visible light irradiation. Furthermore, the antimicrobial assay of the synthesized Ag₂O NPs was carried out by the disc diffusion method against Gram-positive and Gram-negative microbial strains.     

Structure and Electron Spin Resonance of Annealed Sol-Gel Glasses Containing Ag

In this work, SiO₂ samples with silver, prepared using the sol-gel method, were analyzed after being thermally treated in air in the range of 100 to 800°C. The sol-gel starting solutions were prepared by mixing tetra-ethyl-orthosilicate (TEOS), water and ethanol. Samples with 4 different H₂O/TEOS molar ratios (3.3, 5, 7.5 and 11.7 respectively) and with different nominal Ag concentrations were prepared (1, 2 and 4%vol. of Ag). It was found that upon annealing, different silver spices were formed, such as Ag₂ ⁺, Ag⁺, Ag°, and metallic silver aggregates. The identification of these spices was carried out by means of X-ray diffraction, Electron Paramagnetic Resonance (EPR), optical emission and optical absorption. It was also found that the specific type of silver spices observed depends on the structure of the SiO₂ matrix and on the annealing temperatures. It was found that samples prepared from precursor solutions with a low H₂O/TEOS ratio have a more open structure, and therefore silver diffuses faster and forms agglomerates at lower temperatures. Samples prepared from solutions with larger H₂O/TEOS ratios have a more dense structure, which allows the formation of atomic or molecular spices in addition to silver particles. A systematic study of this system was carried out using EPR on samples prepared from solutions having different H₂O/TEOS molar ratios, various Ag concentrations and subjected to different thermal treatments.     

Preparation of Chitosan Based Scaffolds Using Supercritical Carbon Dioxide

A novel chitosan-formaldehyde porous derivative (scaffolds) was prepared by reaction of 85% deacetylated chitosan with 37% aq. formaldehyde using supercritical carbon dioxide (sc. CO₂). Prior to reaction, the chitosan hydrogel was prepared in 1% aq. acetic acid (AcOH) and formaldehyde. The prepared hydrogel was subjected to solvent exchange. The identity of the Schiff base was confirmed by Fourier transform infrared spectroscopy (FTIR). The chitosan-derivative was evaluated by thermal analysis, scanning electron microscopy, and porosimetry analysis. Overall, the sc. CO₂ assisted chitosan derivative opens new perspectives as biomedical material.     

Lewis acid-nitromethane complex-promoted Friedel-Crafts reactions of PS-DVB-resins

Aminomethyl-polystyrene resins were prepared using FeCl₃-nitromethane and FeCl₃-benzophenone complexes as Friedel-Crafts catalysts. All the resins were highly loaded and functionalized with Rink amide linker. A comparative synthesis of the classic difficult sequence ACP (65-74) on the prepared resins by Fmoc/t-Bu chemistry is presented. The target peptide of highest purity (91%) was that prepared using FeCl₃-nitromethane.     

总气压与Ar/O2流量比对直流对向靶磁控溅射TiO2薄膜光催化性能的影响

采用对向靶磁控溅射法在不同气压和Ar/O₂流量比条件下, 以氟化SnO₂ (FTO)导电玻璃为基底制备了多晶TiO₂薄膜. 台阶仪测量结果显示所制备TiO₂薄膜的平均厚度约为200 nm. 随着溅射气压的升高, TiO₂薄膜由锐钛矿与金红石混晶结构转变为纯锐钛矿结构. 分别采用场发射扫描电镜(FESEM)和原子力显微镜(AFM)分析了不同气压和Ar/O₂流量比对TiO₂薄膜表面形貌的影响, 结果显示TiO₂薄膜的表面粗糙度随溅射总气压和Ar/O₂流量比的增加而增大. 以初始浓度为100×10^-6 (体积分数)的异丙醇(IPA)气体为目标物检测所制备TiO₂薄膜的光催化性能, 并分析该气相光催化反应的机理, 在紫外照射条件下异丙醇先氧化为丙酮再被氧化为CO₂.当总溅射气压为2.0 Pa、Ar/O₂流量比为1:1时, 溅射所得TiO₂薄膜具备最优光催化活性并可在IPA降解反应中保持较高的催化活性和稳定性.     

Effect of metal deposition on the photocatalytic activity of titania-silica for the removal of 2-propanol diluted in water

The influence of transition metals, such as Ag, Cr, and Co, on the photocatalytic properties of titania-silica (TiO₂-SiO₂) prepared via both impregnation (imp) and photo-assisted deposition (PAD) methods has been investigated. The decomposition of 2-propanol under UV-light irradiation was used to probe the effect of transition metals deposition on the activity of titania-silica. PAD-Ag/TiO₂-SiO₂ prepared by the PAD method was highly active compared to the original TiO₂-SiO₂, while imp-Cr/TiO₂-SiO₂ prepared by conventional impregnation method showed a weak tendency toward the decomposition of 2-propanol.     

溶剂热法制备Ag/TiO_2纳米材料及其光催化性能

以乙醇为溶剂,钛酸四丁酯为前驱体,用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂.利用X射线衍射(XRD)、N2吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征,以亚甲基蓝(MB)溶液的脱色降解为模型反应,考察了不同Ag含量样品的光催化性能.结果表明:用溶剂热法制备的样品中TiO2皆为锐钛矿相,金属Ag颗粒沉积在TiO2表面,粒径为2nm左右,比表面积较溶胶凝胶法制备的样品大大增加,最高可达151.44m2·g-1;UV-Vis光谱和光催化实验表明:Ag修饰使TiO2对光的吸收能力大大增强,吸收带边红移至可见光区,亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型;溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品,在紫外光和可见光下,Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

Enantioselective Deprotonation of Cyclohexene Oxide to (R)-2-Cyclohexen-1-ol

The reaction of cyclohexene oxide with homochiral lithium amides, prepared from (S)-phenylglycine and (S)-valine has been studied and (R)-2-cyclohexen-1-ol 3 was prepared in a maximum of 72% ee. The optical purity was determined by ¹H NMR measurement of the α-methoxy-α-(trifluoromethyl)phenyl acetic acid (MTPA) derivative of the corresponding alcohol.     

Application of Sol-Gel Method to Preparation of Ultra-Uniform Co-Based Catalysts for Fischer-Tropsch Reaction

Uniformly dispersed Co/SiO₂ catalysts (10–60 wt% on metal basis) were prepared by the sol-gel method, and used for the Fischer-Tropsch (F-T) synthesis in slurry phase at 503 K and 1 MPa in a flow of synthesis gas (H₂/CO = 2/1, W/F = 10 g-catal·h/mol). The catalysts were characterized by temperature-programmed reduction (TPR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and chemisorption. Although CO conversion over the unpromoted catalysts prepared by the sol-gel method was lower than the conventional catalysts prepared by impregnation, the catalytic activity of the former catalysts was more stable than the latter catalysts. The conversion was improved drastically, when 0.01–1 wt% of Ir or Ru (on metal basis) was added to the catalysts prepared by the sol-gel method. The TPR and XPS spectra and the H₂ chemisorption revealed that the noble metal addition was responsible for the reduction of Co particles in the catalysts. It is supposed that the durability of the promoted catalysts prepared by the sol-gel method was ascribed to the high dispersion of Co particles stabilized on the catalyst surface.     

Fluorescence Enhancement of IgG-FITC Based on Surface Plasmon Resonance of Ag@SiO2 Nanoparticles as Application of Biomarker

Ag@SiO₂ nanoparticles with the core-shell structure have been prepared, of which the silver core was about 50 nm and the thickness of silica shell was approximately 10 nm. In slightly alkaline aqueous solution (pH = 8), through electrostatic force between cationic polymer PDDA (i.e., poly-diallyldimethylammonium chloride) and the obtained Ag@SiO₂ nanoparticles, PDDA molecules were fixed on the surface of Ag@SiO₂ nanoparticles. The prepared Ag@SiO₂/PDDA nanoparticles have both rich positive surface charges and rich micro-holes of silica shell. Based on micro-hole adsorption, the small molecule FITC (i.e., fluorescein isothiocyanate) marking on IgG (i.e., immunoglobulin) was adsorbed into the rich microholes of silica shell; at the same time, the negatively charge macromolecule IgG marked by FITC was firmly fixed on the rich positive charges surface of Ag@SiO₂/PDDA nanoparticles by electrostatic interaction. And then, Ag@SiO₂/PDDA/IgG-FITC fluorescent nanoparticles with the SPR fluorescence enhancement were prepared. The shell-type SiO₂/PDDA/IgG-FITC nanoparticles were obtained by dissolving the silver core in the prepared core-shell Ag@SiO₂/PDDA/IgG-FITC nanoparticles by using H₂O₂. Compared with the shell-type nanoparticles, the fluorescence intensity of Ag@SiO₂/PDDA/IgG-FITC was enhanced 1.7 times. The prepared Ag@SiO₂/PDDA/IgG-FITC nanoparticles have both SPR-based fluorescence enhancement ability and the surface distributing IgG–based obvious advantages including good biocompatibility and easy marking with other biomolecules.     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.