Effect of the Copper Oxide Sintering Additive on the Electrical and Electrochemical Properties of Anode Materials Based on Sr<Subscript>2</Subscript>Fe<Subscript>1.5</Subscript>Mo<Subscript>0.5</Subscript>O<Subscript>6–δ</Subscript>

The effect of introducing 1–3 wt % copper oxide sintering additive on the electrical and electrochemical characteristics of promising anode materials for solid oxide fuel cells based on Sr₂Fe_1.5Mo_0.5O_6–δ was studied. The total conductivity increases with increasing amount of copper oxide. The maximum conductivity in humid hydrogen at 800°C, 45 S cm^–1, was reached on introducing 3 wt % CuO. The sintering additive enhances the electrochemical activity of Sr₂Fe_1.5Mo_0.5O_6–δ and Sr₂Fe_1.5Mo_0.5O_6–δCe_0.8Sm_0.2O_1.9 anodes. A decrease in the sintering temperature of the anodes containing CuO with the electrolyte based on lanthanum gallate directly correlates with the electrochemical activity of the anodes. The minimum value of the polarization resistivity, 0.15 Ω cm² at 800°С in a humid hydrogen atmosphere, was obtained for the composite anode with 3 wt % CuO sintered at a temperature of 1050°С.     

The Effect of Sc<Subscript>2</Subscript>O<Subscript>3</Subscript> on the Physicochemical Properties of Low-Melting Cryolite Melts КF–AlF<Subscript>3</Subscript> and КF–NaF–AlF<Subscript>3</Subscript>

Quasibinary phase diagrams of the system “low-melting cryolite–Sc₂O₃” the potential media for synthesizing alloyed alloys Al–Sc are plotted by the method of thermal analysis. The phase diagrams of (KF–NaF–AlF₃)–Sc₂O₃ with different content of NaF and the cryolite ratio (CR) 1.3 and 1.5 are the diagrams with simple eutectics. The liquidus temperature of the (KF–AlF₃)–Sc₂O₃ system increases with the increase in the Sc₂O₃ concentration due to the formation of a high-melting compound: potassium hexafluoroscandiate К₃ScF₆. The solubility of Sc₂O₃ in low-melting cryolite melts KF–NaF–AlF₃ increases with the increase in temperature and CR. In contrast Al₂O₃, the solubility of Sc₂O₃ in melts containing KF–AlF₃ with CR = 1.3–1.5 is much lower than in cryolite melts containing NaF. The conductivity of low-melting cryolite melts measured by the method of impedance spectroscopy decreases in proportion to the Sc₂O₃ concentration in the similar way as in salt melts containing Al₂O₃. Based on the experimental data obtained, the compositions of low-melting cryolite melts are proposed for the synthesis of doped Al–Sc alloys.     

Synthesis and Properties of La<Subscript>0.95</Subscript>Sr<Subscript>0.05</Subscript>ScO<Subscript>3–δ</Subscript> Protic Electrolyte Films on Porous Cathode Material

Fundamental aspects of the phase formation and morphology of films of the proton-conducting solid electrolyte La_0.95Sr_0.05ScO_3–δ, produced by wet deposition from inorganic salts on a porous cathode substrate La_0.6Sr_0.4MnO_3–δ. The conditions in which gas-tight films are deposited onto substrates with porosity of up to 25% were determined. The electrical conductivity of La_0.95Sr_0.05ScO_3–δ films was examined in relation to temperature and gas-phase composition (рН₂О, рО₂). The effect of the architecture of the electrolyte membrane on its transport properties was analyzed. The results of the study are of fundamental importance for development of proton-ceramic fuel cells with a supporting electrode.     

Structure and Crystallization of Glasses in the MnNbOF<Subscript>5</Subscript>–BaF<Subscript>2</Subscript>–InF<Subscript>3</Subscript> System

Glasses of the MnNbOF₅–BaF₂–InF₃ system were prepared. The structure, thermal behavior, and crystallization of these glasses were studied by IR and Raman spectroscopy, differential scanning calorimetry (DSC), X-ray powder diffraction, and microscopy. The \(\rm{NbO}_2\rm{F}_4^{3-}\) and \(\rm{InF}_6^{3-}\) ions form a mixed glass network. Glass crystallization occurs in one or two steps depending on the component ratio. The major crystal phases are Ba₃In₂F₁₂ and BaNbOF₅. The obtainability of transparent crystal-glass samples in MnNbOF₅–BaF₂–InF₃ glasses via heat treatment is shown.     

Synthesis and properties of γ-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> solid solutions

The textural and structural properties of mixed oxides Ga₂O₃–Al₂O₃, obtained via impregnating γ-Al₂O₃ with a solution of Ga(NO₃)₃ and subsequent heat treatment, are studied. According to the results from X-ray powder diffraction, gallium ions are incorporated into the structure of aluminum oxide to form a solid solution of spinel-type γ-Ga₂O₃–Al₂O₃ up to a Ga₂O₃ content of 50 wt % of the total weight of the sample, accompanied by a reduction in the specific surface area, volume, and average pore diameter. It is concluded that when the Ga₂O₃ content exceeds 50 wt %, the β-Ga₂O₃ phase is observed along with γ-Ga₂O₃–Al₂O₃ solid solution. ⁷¹Ga and ²⁷Al NMR spectroscopy shows that gallium replaces aluminum atoms from the tetrahedral position to the octahedral coordination in the structure of γ-Ga₂O₃–Al₂O₃.     

Effects of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> on the crystallization and structure of CaO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> glass ceramics

Radiation-induced degradation of the weakly and strongly 4-vinylpyridine basic ion exchange resins by gamma radiolysis was investigated in the presence of air and liquid water. This study is focused on evaluating the radiolytic gases (H₂, CO, CO₂ and CH₄) and liquid products (water-solute TOC and NH₄ ⁺). The weakly basic resin yielded lower amounts of H₂ and CO and higher amounts of CO₂ than those of the strongly basic resin. Moreover, the strong basic resin tended to yield greater amounts of NH₄ ⁺. Resins were characterized by the FTIR spectroscopy technique and the results showed that the resins structures are relatively stable.     

Photocatalytic Conversion of a FeCl<Subscript>3</Subscript>–CCl<Subscript>4</Subscript>–ROH System

The photocatalytic transformations of carbon tetrachloride and aliphatic primary alcohols in the presence of iron trichloride and a molar ratio of components FeCl₃: CCl₄: ROH = 1: 300: 2550 were studied. CCl₄ is transformed into chloroform and hexachloroethane after exposure to a mercury lamp (250 W) to the FeCl₃–CCl₄–ROH system at 20°C, whereas the primary ROH alcohols are selectively oxidized into acetals (1,1-dialkoxyalkanes). The maximum conversion of CCl₄ reaches 80%. The kinetics and mechanism of the photocatalytic conversion of the FeCl₃–CCl₄–ROH system are considered.     

Ionic mobility and electrophysical properties of solid solutions in PbF<Subscript>2</Subscript>–SbF<Subscript>3</Subscript> and PbF<Subscript>2</Subscript>–SnF<Subscript>2</Subscript>–SbF<Subscript>3</Subscript> systems

Ionic mobility and electrical conductivity of solid solutions with fluorite structure, obtained with solid-state approach in PbF₂–SbF₃ and PbF₂–SnF₂–SbF₃ systems, are studied by 19F NMR and electrochemical impedance spectroscopy methods. The 19F NMR spectra parameters, types of ion motions in the fluoride sublattice, and the ionic conductivity magnitude are shown to be determined by the temperature and fluoride concentration in the solid solutions. The solid solution specific conductivity in the PbF₂–SbF₃ and PbF₂–SnF₂–SbF₃ systems at 420–450 K is as high as ~10^–2 S/cm, which allows accounting the solid solutions as a base for preparation of functional materials.     

Effect of MoO<Subscript>3</Subscript> additions on the thermal stability and crystallization kinetics of PbO–Sb<Subscript>2</Subscript>O<Subscript>3</Subscript>–As<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

The present paper reports on the effect of MoO₃ on the glass transition, thermal stability and crystallization kinetics for (40PbO–20Sb₂O₃–40As₂O₃)_100−x –(MoO₃) _x (x = 0, 0.25, 0.5, 0.75 and 1 mol%) glasses. Differential scanning calorimetry (DSC) results under non-isothermal conditions for the studied glasses were reported and discussed. The values of the glass transition temperature (T _g) and the peak temperature of crystallization (T _p) are found to be dependent on heating rate and MoO₃ content. From the compositional dependence and the heating rate dependence of T _g and T _p, the values of the activation energy for glass transition (E _g) and the activation energy for crystallization (E _c) were evaluated and discussed. Thermal stability for (40PbO–20Sb₂O₃–40As₂O₃)_100−x –(MoO₃) _x glasses has been evaluated using various thermal stability criteria such as ΔT, H _r , H _g and S. Moreover, in the present work, the K _r(T) criterion has been considered for the evaluation of glass stability from DSC data. The stability criteria increases with increasing MoO₃ content up to x = 0.5 mol%, and decreases beyond this limit.     

Structural and Temperature Dependent Electrical Conductivity Properties of Dy<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sm<Subscript>2</Subscript>O<Subscript>3</Subscript> CO-Doped Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

In the present work, Dy₂O₃ and Sm₂O₃ double-doped Bi₂O₃-based materials are synthesized by exploiting the solid-state synthesis method. The structural and temperature dependent electrical properties of these ternary ceramic samples, which are candidate materials for solid oxide fuel cell (SOFCs) electrolyte, are determined by means of a powder X-ray diffractometer (XRD), the four point-probe method (FPPM), and the thermal-gravimetry/differential thermal analysis (TG/DTA). As a result of the XRD measurements, the fluorite-type fcc δ-phase with a stable structure is obtained for higher values of the dopant oxide material, which are the samples with the maximum content of fixed 20% Dy₂O₃ and 15% and 20% Sm₂O₃. The samples with the stable δ-phase structure have higher conductivities. The highest electrical conductivity is found for the (Bi₂O₃)0.6(Dy₂O₃)_0.2(Sm₂O₃)_0.2 sample, which was 2.5×10^–2 (Ohm cm)^–1 at 750 °C. The activation energies are also calculated from the Arrhenius charts, which were determined from the FPPM measurements. The lowest activation energy is found as 0.85 eV for the sample with the highest electrical conductivity.     

TeO<Subscript>2</Subscript>–(NaPO<Subscript>3</Subscript>)<Subscript>6</Subscript> Glass-Forming System

It is suggested to use sodium hexametaphosphate as a new glass-forming agent for tellurite glasses. The limits of the glass-forming region were determined for the TeO₂–(NaPO₃)₆ system, and a selective study of the thermal behavior of the glasses synthesized was carried out by the method differential scanning calorimetry. The optical transmission in the UV, visible, and IR spectral ranges was examined. It was shown that oxides of rare-earth elements can be introduced into the glass, which opens up prospects for application of the system as a matrix for generation of laser light in the 2-μm range, required in fabrication of medical lasers.     

Synthesis and properties of magnetic superhydrophobic mesoporous Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> composites

Ways to obtain Fe₂O₃–SiO₂ iron-containing silica composites with organized mesoporous structure (MCM-41) and large specific surface area (up to 1476 m² g^–1) were considered. The influence exerted by the method used to synthesize the materials on their structure, texture characteristics, particle size, and magnetic properties were studied. The aggregative stability of samples was examined. It was shown that treatment of the resulting composites with compounds from the chlorosilane group affects their hydrophobic properties.     

Effect of ZrO<Subscript>2</Subscript> on Catalyst Structure and Catalytic Sulfur-Resistant Methanation Performance of MoO<Subscript>3</Subscript>/ZrO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts

A series of MoO₃/ZrO₂–Al₂O₃ catalysts was prepared and investigated in the sulfur-resistant methanation aimed at production of synthetic natural gas. Different methods including impregnation, deposition precipitation, and co-precipitation were used for preparing ZrO₂–Al₂O₃ composite supports. These composite supports and their corresponding Mo-based catalysts were investigated in the sulfur-resistant methanation, and characterized by N₂ adsorption–desorption, XRD and H₂-TPR. The results indicated that adding ZrO₂ promoted MoO3dispersion and decreased the interaction between Mo species and support in the MoO₃/ZrO₂–Al₂O₃ catalysts. The co-precipitation method was favorable for obtaining smaller ZrO₂ particle size and improving textural properties of support, such as better MoO₃ dispersion and increased concentration of Mo⁶⁺ species in octahedral coordination to oxygen. It was found that the MoO₃/ZrO₂–Al₂O₃ catalyst with ZrO₂Al₂O₃ composite support prepared by co-precipitation method exhibited the best catalytic activity. The ZrO₂ content in the ZrO₂Al₂O₃ composite support was further optimized. The MoO₃/ZrO₂–Al₂O₃ with 15 wt % ZrO₂ loading exhibited the highest sulfur-resistant CO methanation activity, and excess ZrO₂ reduced the specific surface area and enhanced the interaction between Mo species and support. The N₂ adsorption-desorption results indicated that the presence of ZrO₂ in excessive amounts decreased the specific surface area since some amounts of ZrO₂ form aggregates on the surface of the support. The XRD and H₂-TPR results showed that with the increasing ZrO₂ content, ZrO₂ particle size increased. These led to the formation of coordinated tetrahedrally Mo⁶⁺(T) species and crystalline MoO₃, and this development was unfavorable for improving the sulfur-resistant methanation performance of MoO₃/ZrO₂–Al₂O₃ catalyst.     

Ternary Systems LiBr–LiVO<Subscript>3</Subscript>–Li<Subscript>2</Subscript>CrO<Subscript>4</Subscript> and KBr–KVO<Subscript>3</Subscript>–K<Subscript>2</Subscript>CrO<Subscript>4</Subscript>

The binary system KVO₃–K₂CrO₄ and two ternary systems, LiBr–LiVO₃–Li₂CrO₄ and KBr–KVO₃–K₂CrO₄, were studied. In the ternary systems, the compositions and melting points of eutectic alloys were determined by differential thermal analysis: (49.0 mol % LiBr, 5.0 mol % LiVO₃, 46.0 mol % Li₂CrO₄, 400°C) and (17.0 mol % KBr, 78.0 mol % KVO₃, 5.0 mol % K₂CrO₄, 458°C), respectively.     

Glass Formation in the Ternary System La<Subscript>2</Subscript>O<Subscript>3</Subscript>–As<Subscript>2</Subscript>S<Subscript>3</Subscript>–Er<Subscript>2</Subscript>O<Subscript>3</Subscript>

The boundaries of the glass formation region in the ternary system La₂O₃–As₂S₃–Er₂O₃ were found. Transparent glass of composition (La₂O₃)_0.03(As₂S₃)0.90(Er₂O₃)0.07 was studied by X-ray photoelectron and Raman spectroscopy. The intensities of the bands characterizing As–S, La–O, and Er–O bonds increased, and these bands were shifted toward higher energies. This was due to an increase in the covalence of these bonds and probably due to the formation of new bonds in the glasses. Samples in the glass formation region are resistant at 300 K to air, water, and organic solvents.     

The Sections GeSnSb<Subscript>4</Subscript>Te<Subscript>8</Subscript>–GeTe and GeSnSb<Subscript>4</Subscript>Te<Subscript>8</Subscript>–SnTe of the Quasi-Ternary System GeTe–Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript>–SnTe

By differential thermal, X-ray powder diffraction, and microstructural analyses and microhardness and density measurements, phase equilibria in the sections GeSnSb₄Te₈–GeTe and GeSnSb₄Te₈–SnTe were studied and their state diagrams were constructed. It was determined that these sections are quasi-binary sections of the eutectic type of the GeTe–Sb₂Te₃–SnTe system. The coordinates of the eutectic points in the sections GeSnSb₄Te₈–GeTe and GeSnSb₄Te₈–SnTe are (40 mol % GeTe, 700 K) and (30 mol % SnTe, 750 K), respectively. Regions of solid solutions based on the initial components in the sections were identified. Alloys in the regions of solid solutions are p-type semiconductors.     

Oxidation of Iodo- and Bromo-Substituted Polymethylbenzenes in the System PbO<Subscript>2</Subscript>–CF<Subscript>3</Subscript>COOH–CH<Subscript>2</Subscript>Cl<Subscript>2</Subscript>

The oxidation of mono- and diiodo- and -bromo-substituted polymethylbenzenes (mesitylene and durene) in the system PbO₂–CF₃COOH–CH₂Cl₂ at room temperature (2–70 h) leads mainly to the formation of iodo- and bromobenzyl alcohols as result of oxidation of methyl group. The reaction involves intermediate formation of haloarene radical cations. ESR study of these radical cations made it possible to determine the structure of their singly occupied molecular orbitals a₂ or b₁ and interpret their reactivity.     

Phase Diagram of the System Tl<Subscript>2</Subscript>Te–Tl<Subscript>5</Subscript>Te<Subscript>3</Subscript>–Tl<Subscript>9</Subscript>GdTe<Subscript>6</Subscript>

The ternary system Tl–Gd–Te within the composition range Tl₂Te–T_l5Te₃–T_l9GdTe₆ was studied by a set of physicochemical analysis methods. Some internal polythermal sections and the isothermal section at 300 K of the phase diagram were built, projections of the liquidus and solidus surfaces were constructed, and the graphs of the concentration dependences of the parameters and microhardness were plotted. It was shown that much (more than 90%) of the area of the concentration triangle is occupied by the homogeneity region of solid solutions with the Tl₅Te₃ structure (δ-phase). Solid solutions based on Tl₂Te (α-phase) form within a narrow region. The regions of the α- and δ-phases are separated by two-phase region α + δ.     

Synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@Au core–shell nanoparticles

A new two-step synthesis of Fe₃O₄@Au core–shell nanoparticles stabilized in polyethylene glycol is described. The nanoparticles were characterized by transmission electron microscopy, X-ray powder diffraction, UV and Mössbauer spectroscopy. Fe₃O₄@Au nanoparticles featured both optical properties (they featured a plasmon resonance band) and magnetic properties (they responded to an external magnetic field), typical of individual gold and magnetite nanoparticles, respectively.     

Synthesis and photocatalytic activity of mesoporous SiO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript>

Mesoporous SiO₂–TiO₂ was synthesized by the sol–gel method using Si(OC₂H₅)₄, Ti(OC₂H₅)₄, and stearyltrimethylammonium chloride. By using acetylacetone as the capping agent of Ti(OC₂H₅)₄, homogeneous SiO₂–TiO₂ composite was obtained. Spherical mesoporous SiO₂–TiO₂ was also synthesized by the sol–gel method using W/O emulsion under microwave irradiation. The specific surface area of these mesoporous SiO₂–TiO₂ materials decreased when the Ti/Si molar ratio was higher than 0.1, which indicated that Ti was homogeneously distributed in mesoporous SiO₂ matrix at Ti/Si ≦ 0.1. The photocatalytic activity of mesoporous SiO₂–TiO₂ materials was investigated by the degradation of methylene-blue in water under UV light irradiation. Mesoporous SiO₂–TiO₂ was effective for the adsorption–decomposition of methylene-blue.