Modeling of sulfide oxidation in tailings dumps of the Kavalerovsky district and their impact on the hydrosphere (Primorsky Krai,Russia)

The results obtained in modeling of drainage waters in tailings dumps of deposits in the Kavalerovsky district in the temperature range from 0 to +45°C are reported. The Eh-pH parameters of the technogenic mineral formation systems at various rock sulfide ratios in the tailings (95: 5, 90: 10, 80: 20, and 60: 40) were determined. The crystallization of supergene minerals from micropore solutions was studied. The qualitative and quantitative ion composition of the minerals and their effect on the surface and ground waters in the district were determined.     

Assessment of the Impact of Technogenic Processes Occurring at the Central Concentrating Mill Tailing Dump (Komsomolsky Tin-Ore District) on the Hydrosphere in a Wide Temperature Range

The results of physicochemical modeling of oxidation of sulfide minerals in the Central Concentrating Mill tailing dump (Komsomolsky tin-ore district) with account taken of the cementation zone in the temperature range from–25 to +45°C are given. The Eh-pH parameters for the formation of micropore solutions in technogenic systems have been determined at different host rock–sulfide ratios (95: 5, 90: 10, 80: 20, 60: 40, 40: 60, 20: 80, 10: 90, 5: 95). Crystallization of hypergene minerals from the micropore solutions have been considered, their qualitaitve and quantitative ion compositions have been determined, and their effect on the hydrosphere has been assessed.     

Modeling the compositions of slime waters in the tailing dumps of the Central and Krasnorechensk concentrating mills at the Dal’negorsk district in the positive temperature range

The paper describes the physicochemical modeling of slime water formation in the dried tailing dumps of the Central and Krasnorechensk concentrating mills in the positive temperature range. The Eh and pH parameters of the equilibrium solutions, quantitative element compositions of the latter, and the compositions of the crystallizing hypergene and technogenic minerals were determined. The modeling was carried out on the basis of the averaged chemical compositions of the tailings. The resulting data point to a possible hydrosphere pollution with slime waters containing elements of sulfide ores and enclosing rocks, which may occur over the entire considered temperature range, both before hypergene mineral deposition and after that.     

Hypergene and Technogenic Formation of Minerals Depending on the Sulfur Content of Tailings in the Tailing Dump of the Krasnorechensk Concentrating Mill (Dalnegorsk District,Primorsky Krai)

Using Selektor program for simulation of chemical equilibria, physicochemical modeling of the EhpH parameters of forming solutions, composition of minerals crystallizing therefrom, and stability fields of these minerals was performed in dependence to the amount of flotation and sulfide sulfur in tailings exposed to water in systems that are open and closed to the atmosphere. This problem is considered for the first time for the given region.     

Rare earth elements in mine,slime, and river waters in the Kavalerovsky and Dalnegorsky districts of the Russian Far East

The concentrations of rare earth elements (REEs) in anthropogenic (mine and slime) and river waters of Kavalerovsky and Dalnegorsky districts of the Far East have been estimated. The highest concentrations of REs have been found in mine water of the Dubrovskoe deposit (Kavalerovsky district), especially in the slime waters of the old tailing dump of the Krasnorechenskaya ore-dressing plant (KODP, Dalnegorsky district). Contamination of the Rudnaya river water has been detected in the vicinity of the KODP old and new tailings dumps. Taking into account that REEs are concomitant with sulfide minerals, the former can be extracted by repeated processing of wastes from the KODP old and new tailings dumps.     

Synthesis and evaluation of bio-based elastomer based on diethyl itaconate for oil-resistance applications

Bio-based elastomer poly(diethyl itaconate-co-isoprene) (PDEII) was designed and synthesized by redox-initiated emulsion polymerization from diethyl itaconate and isoprene with mass ratio of 20:80, 40:60, 60:40 and 80:20. The number-average molecular weights of PDEII exceeded 140000 with relatively high yields. The physical properties of PDEII, such as glass transition temperatures and thermostability, were comparable with conventional synthetic elastomers and can be readily tuned by varying the ratio of diethyl itaconate to isoprene. The interaction between silica and PDEII macromolecules was effectively enhanced with the increase of diethyl itaconate content by endowing high polarity. The oil-resistance relevant properties of silica/ PDEII80 (80% diethyl itaconate, 20% isoprene) such as retention of tensile strength, retention of elongation at break and change in volume even surpass those of silica/NBR 240S after soaked in ASTM 3# oil at different temperatures.     

Some Physicochemical Measurements of Chitosan/Starch Polymers in Acetic Acid-Water Mixtures

Summary: Physicochemical properties of chitosan/starch solution have been studied. Chitosan/starch solutions of different concentrations (90/10, 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, 20/80, 10/90) are prepared in dilute acetic acid solution (1%, 2%, 3%, 4%). It is observed that the solution of chitosan/starch is miscible over entire range of concentration. The solution properties such as viscosity, density and refractive index are measured. The influence of concentration of solution and speed of rotation on shear stress and shear rate are also determined for polymer solution.     

Phase Behavior of Oleyl Oleate with Nonionic Surfactants

Oleyl oleate (OE), a liquid wax ester, has been reported as a potential raw material for cosmetic and pharmaceutical uses but little is known about its phase behavior in ternary systems. Two types of nonionic surfactants were selected, namely, Tween‐60 (T60) and Span 20 (S20). Phase diagrams of OE/T60/water and OE/S20/water systems were constructed at 25.0±0.5°C. Ternary phase diagrams of OE/T60∶S20 (20∶80 and 60∶40)/water systems were then constructed at the same temperature. The ratios of 80∶20 and 60∶40 of T60∶S20 were selected due to different solubility points of the surfactants in water. The results showed that the oleyl oleate with mixed surfactants system, OE/T60∶S20 (20∶80 and 60∶40)/water, gave better performance than the individual surfactant systems. The high percent of T60 of 80∶20 in the T60∶S20 system contributes to enlargement of the isotropic region. In contrast, by increasing the percent of S20 of 60∶40 in T60∶S20 contributes to a larger liquid crystalline region.     

Hybrid electrospun nonwovens from chitosan/cellulose acetate

Co-mixtures of chitosan (CS) and cellulose acetate (CA) were electrospun into fibrous webs from a binary co-solvent containing 70:30 trifluoroacetic acid (TFA): methylene chloride (DCM). Fibrous webs were produced from CS/CA in ratios (wt%) of 20:80, 40:60, 50:50 and 60:40. As determined by SEM analysis, 12% polymer solutions of CS/CA 60:40 produced structures with uniform bead free fibre morphologies with an average fibre diameter of 458 nm. FTIR-spectroscopy confirmed the presence of CS in the as-spun fibres in the form of chitosan-amine trifluoroacetate salts (NH₃ ⁺CF₃COO⁻). Uniform mixing of the CS and CA components was confirmed by DSC analyses. Alkaline neutralisation of the chitosan amine salts was explored as a means of increasing wet stability. The as-spun fibres were found to be relatively unstable in aqueous medium due to the solubility of the chitosan amine salts. Alkaline post-neutralisation was evaluated as means of minimising weight loss and maximising retention of fibrous structure.     

The evaluation of miscibility of blends of poly(ether imide) (Ultem1000) and a copolyester of bisphenol-A with terephthalic and isophthalic acid (ArdelD-100) by viscosimetry

The intermolecular interactions and miscibility behavior between poly(ether imide) (Ultem^®1000) and a copolyester of bisphenol-A with a mixture of terephthalic and isophthalic acid (Ardel^®D-100) in compositions of 100/0, 80/20, 60/40, 40/60, 20/80 and 0/100 have been investigated in dilute solutions in chloroform. An Ubbelohde-type home-made viscometer was used to determine the specific viscosities of the blends in a constant temperature bath. Several viscosity interaction parameters used as the criteria of miscibility were determined from viscosity measurements. The parameters suggested that Ultem^®1000 and Ardel^®D-100 were miscible. The miscibility of the polymers was confirmed by the results of differential scanning calorimetry measurements.     

玻璃标样结合硫内标归一定量技术在激光剥蚀-等离子体质谱分析硫化物矿物中的应用

以硬石膏矿物标样中Ca相对于S的灵敏度因子为基准,将玻璃标样中主量和痕量元素相对于Ca的灵敏度因子转换成元素相对于S的灵敏度因子,建立了多玻璃标样结合硫内标归一定量技术分析硫化物单矿物多元素的新方法。利用本方法分析了美国合成多金属硫化物矿物标样MASS-1中20种元素,主量元素分析结果的相对误差小于10%,痕量元素分析结果几乎都落在给定值±不确定度范围内。利用本方法对12个硫化物单矿物分析结果表明,绝大多数主量元素含量测定值的相对误差小于10%,且多数主量元素甚至优于以MASS-1为外标、内标归一定量法及内标校准法分析结果,而痕量元素与MASS-1校准结果较为一致。本方法克服了基体不匹配的问题,能比较准确地定量分析硫化物矿物中的主成分S,可用于定量校准硫化物矿物。     

Bone cements in the calcium phosphate–calcium sulfate system

Cement materials in the calcium phosphate–calcium sulfate system were proposed for bone tissue reconstruction. Mixtures of calcium sulfate and amorphous calcium sulfate in the weight ratios 20: 80, 40: 60, 60: 40, and 80: 20 were used as a cement flour, and an acidic solution of orthophosphoric acid was used as a setting liquid. Cement materials based on dicalcium phosphate dihydrate and calcium sulfate were obtained, and the phase composition, setting time, compressive strength, and microstructure of cements were studied. A phenomenon of dispersion strengthening of cements by adding 20 wt % calcium sulfate was detected. The obtained cement stone had a strength to 60 MPa, a setting time of 6–7 min, and uniform microstructure with a crystal size of 1–2 μm.     

贵州瓮福地区磷尾矿中钙、镁、磷的赋存状态测定

应用化学组分分析、X射线衍射分析、扫描电子显微镜及X射线能谱法等多种方法对贵州省瓮福地区磷尾矿中钙、镁及磷的赋存状态作了分析和研究。结果表明:①选自该矿区的磷尾矿为高镁(wMgO17.26%～17.65%),高钙(wCaO34.11%～34.56%),低磷(wP2O55.30%～5.69%)的固体矿物;②尾矿中镁主要以白云石形式存在,并有少量以磷酸盐和硅酸盐形式存在;钙主要也以白云石形式存在,加上少量以方解石和磷酸盐形式存在;磷主要以磷灰石形式存在,有少量存在于铁氧化物及独居石、磷钇矿中。     

Water in oil (w/o) and double (w/o/w) emulsions prepared with spans: microstructure,stability, and rheology

The objective was to analyze the microstructure, stability, and rheology of model emulsions prepared with distilled water, refined sunflower oil, and different Spans (20, 40, 60, and 80) as emulsifiers. The effects of the water content and Span 60 concentration were studied. The lowest water contents led to w/o emulsions, whereas higher percentages gave w/o/w emulsions. Microscopy analysis showed that w/o/w emulsions of higher water contents had a lower number of internal water droplets. W/o emulsions were destabilized by coalescence and sedimentation, whereas creaming was observed in unstable w/o/w emulsions. In the last ones, the creaming stability decreased with increasing water content and enhanced with higher Span 60 concentration; the same effect was observed in their viscoelasticity: They were from unstable liquids to stable gels. Solid Spans (40 and 60) produced more consistent w/o/w emulsions at low water contents and more stable systems at high water percentages in comparison with liquid Spans (20 and 80).     

Rheology of rodrun liquid-crystalline polymers

The rheological characterization of two commercial thermotropic liquid crystalline polymers based on poly(ethylene terephthalate) (PET) and para-hydroxybenzoic acid (PHB) is carried out. The thermal transitions determined by DMTA are explained by the random character of these copolyesters, in comparison with non-random copolyesters synthesized by Jackson and Kuhfuss. The evolution of the dynamic viscoelastic functions with time in the nematic state is concave in shape for the 20%PET/80%PHB copolymer, a result that leads us to treat this system as a suspension of solid spheres (unmolten crystals) where the volume fraction of crystals increases with time according to an Avrami equation. The response of 40%PET/60%PHB copolymer is similar to a chemical or physical gelation and the hypothesis that the polydomain structure gives rise to a network is considered. Continuous flow, time-independent viscosity results reveal the existence of a three-region flow curve for 40%PET/60%PHB copolymer, but a Newtonian zone followed by a shear thinning region for 20%PET/80%PHB sample. At high temperatures the isotropization of the samples leads to a very strong decrease of the activation energy of flow, which becomes zero for 40%PET/60%PHB. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 253–263, 1998     

Trace determination of volatile sulfur compounds by solid-phase microextraction and GC-MS

A method was developed for the simultaneous determination of the following nine volatile sulfur compounds in gas samples: carbon disulfide, carbonyl sulfide, ethyl sulfide, ethyl methyl sulfide, hydrogen sulfide, isopropanethiol, methanethiol, methyl disulfide and methyl sulfide. The target compounds were preconcentrated by solid-phase microextraction (SPME) and determined by gas chromatography combined with mass spectrometry. Experimental design was employed to optimize the extraction time and temperature and concurrent detection of the nine compounds was achieved by using an SPME fiber coated with Carboxen-polydimethylsiloxane (75 microns). Detection limits ranged from 1 ppt (v/v) for carbon disulfide to 350 ppt (v/v) for hydrogen sulfide and calibration functions were linear up to 20 ppb (v/v) for all the compounds investigated.     

Acid-base equilibrium of anionic dyes partially bound to micelles of nonionic surfactants

The acid-base equilibria of the sulfonephthalein dyes, namely, bromothymol blue, thymol blue, and cresol red, in aqueous nonionic micellar solutions of Triton X-100, Tween-20, Tween-40, Tween-60, and Tween-80 have been investigated. The equilibrium constants of the partition of the dyes between micellar and aqueous pseudophases have been determined spectrophotometrically at fixed pH. The K(ass) increased with the surfactants in the order Tween-80相似文献   

Catalytic ferrocenyl sulfides for the asymmetric transformation of aldehydes into epoxides

Six ferrocenyl sulfides, exhibiting planar and central chiralities, have been screened as a catalytic source of asymmetric sulfonium ylides. A one-pot reaction has been achieved, involving the addition of an aldehyde, benzyl bromide, 20% molar equivalent of the ferrocenyl sulfide, sodium iodide in a mixture of tert-butanol and water. The best results were observed with enantiopure sulfide 3a, bearing a tert-butyl group. Good yields of stilbene oxides were obtained, with enantiomeric excesses ranging from 74% to 94%. trans/cis-Diastereomeric ratios ranged from 60:40 to 86:14. The chiral sulfide was recovered. An unexpected case of stereoconvergence was observed with diastereoisomers 3a and 3b. A model is proposed to account for the asymmetric induction, based on a conformation locked by the tert-butyl group and the interplay of planar and remote central chiralities.     

The value of the second dissociation constant of hydrogen sulfide

Summary We have determined the second dissociation constant of hydrogen sulfide in the temperature range 20–60°.     

Composite precursor of polyacrylonitrile with hydrolytic lignin

Composite precursor based on hydrolytic lignin and polyacrylonitrile was obtained and fibrous composite materials were formed at 80: 20 to 40: 60 ratios between the starting components. A probable mechanism is suggested by which products of cocarbonization of lignin and polyacrylonitrile are formed, with 80–90 wt % carbonized residue produced in an inert atmosphere.