Visible light photochemical synthesis of ultrasmall palladium/copper bimetallic particles at room temperature and its catalytic application in degradation of p-NP

Pt-based metals are very effective catalysts widely adopted in many fields. But the high cost prevents its further industrial application. One of the effective ways to solve the problem is to replace platinum with relatively cheap palladium and its alloy with copper. However, producing Pd/Cu bimetallic catalysts efficiently and economically with controllable particle size and uniform distribution is still challenging, especially when trying to reduce the consumption of precious metals. In this paper, ultrasmall palladium/copper (Pd/Cu) bimetallic catalysts with even dispersion were prepared on multi-walled carbon nanotubes (MWCNTs) by adding polyethylene glycol 400 (PEG 400) as a reducing agent and stabilizer under visible light irradiation at room temperature. The catalytic performance was studied in the catalysis of p-nitrophenol (p-NP) reduction. Of all the bimetallic catalysts produced in different conditions, the best one was obtained under the reaction condition of pH = 7 and violet light irradiation (wavelength 380–435 nm). The average particle size of 0.85 nm, and the apparent rate constant in the catalysis is 1.47 min^?1. This research probes the role of visible light as a key kinetic controlling method in the formation of ultrasmall particles (UPs). It proves the effectiveness of using visible light irradiation as an effective and more “green chemistry” approach to get precious metal UPs as catalysts beyond the traditional ultraviolet or laser photochemistry methods.     

Sunlight‐Driven Hydrogen Peroxide Production from Water and Molecular Oxygen by Metal‐Free Photocatalysts

Design of green, safe, and sustainable process for the synthesis of hydrogen peroxide (H₂O₂) is a very important subject. Early reported processes, however, require hydrogen (H₂) and palladium‐based catalysts. Herein we propose a photocatalytic process for H₂O₂ synthesis driven by metal‐free catalysts with earth‐abundant water and molecular oxygen (O₂) as resources under sunlight irradiation (λ>400 nm). We use graphitic carbon nitride (g‐C₃N₄) containing electron‐deficient aromatic diimide units as catalysts. Incorporating the diimide units positively shifts the valence‐band potential of the catalysts, while maintaining sufficient conduction‐band potential for O₂ reduction. Visible light irradiation of the catalysts in pure water with O₂ successfully produces H₂O₂ by oxidation of water by the photoformed valence‐band holes and selective two‐electron reduction of O₂ by the conduction band electrons.     

Effects of Light Energy and Reducing Agents on C60‐Mediated Photosensitizing Reactions

Many biomolecules contain photoactive reducing agents, such as reduced nicotinamide adenine dinucleotide (NADH) and 6‐thioguanine (6‐TG) incorporated into DNA through drug metabolism. These reducing agents may produce reactive oxygen species under UVA irradiation or act as electron donors in various media. The interactions of C₆₀ fullerenes with biological reductants and light energy, especially via the Type‐I electron‐transfer mechanism, are not fully understood although these factors are often involved in toxicity assessments. The two reductants employed in this work were NADH for aqueous solutions and 6‐TG for organic solvents. Using steady‐state photolysis and electrochemical techniques, we showed that under visible light irradiation, the presence of reducing agents enhanced C₆₀‐mediated Type‐I reactions that generate superoxide anion (O₂^.?) at the expense of singlet oxygen (¹O₂) production. The quantum yield of O₂^.? production upon visible light irradiation of C₆₀ is estimated below 0.2 in dipolar aprotic media, indicating that the majority of triplet C₆₀ deactivate via Type‐II pathway. Upon UVA irradiation, however, both C₆₀ and NADH undergo photochemical reactions to produce O₂^.?, which could lead to a possible synergistic toxicity effects. C₆₀ photosensitization via Type‐I pathway is not observed in the absence of reducing agents.     

One-pot three-component reaction of C60, amino acid and fluorinated benzaldehyde to C60-pyrrolidine derivatives

A series of fluorinated 2,5-disubstituted C₆₀-pyrrolidine derivatives were synthesized via one-pot three-component reaction of C₆₀, amino acid and fluorinated benzaldehyde under reflux in toluene or microwave irradiation. The cis- and trans-isomers could be isolated by chromatography and fully confirmed by ¹H NMR.     

Promotion of Mn Doped Co/CNTs Catalysts for CO Hydrogenation to Light Olefins

With various contents, Mn was introduced into carbon nanotubes (CNTs) supported cobalt catalysts and the obtained Mn‐Co/CNTs catalysts were investigated for CO hydrogenation to light alkenes and characterized by N₂ adsorption, X‐ray diffraction (XRD), X‐ray photoelectron spectra (XPS), H₂ temperature programmed reduction (TPR), CO temperature programmed desorption (TPD) and transmission electron microscope (TEM). The results indicate that the addition of a small amount of Mn (0.3 wt%) to CNTs‐supported Co catalyst significantly increased the selectivity of C₂–C₄ olefins and decreased the selectivity of CH₄. However, with further addition of Mn to the cobalt catalysts, the CH₄ selectivity decreased obviously along with the increase of the C₅₊ selectivity. Compared with the unpromoted catalysts, the Mn‐promoted cobalt catalysts increased the C₂^?–C₄^?/C₂⁰–C₄⁰ molar ratio.     

Metallodendrimers and dendronized gold colloids as nanocatalysts,nanosensors and nanomaterials for molecular electronics

The research recently carried out in our laboratories is summarized and discussed in the literature context towards green chemistry (dendritic catalysts) and nanotechnology: (i) construction of giant dendrimers far beyond the De Gennes dense-packing limit using building blocks efficiently synthesized by organo-iron activation of simple arene; (ii) use of water-soluble star-shaped organo-iron redox catalysts for nitrate and nitrite cathodic reduction in water; (iii) synthesis of giant dendritic stars from three generations of ruthenium-carbene dendrimers using ROMP and remarkable dendritic effects; (iv) assembly of dendronized gold nanoparticles that selectively recognized H₂PO₄^– and ATP^2–; (v) electron-reservoir metallodendrimers serving as molecular batteries and the example of C₆₀. To cite this article: D. Astruc et al., C. R. Chimie 6 (2003).     

Cobalt-doped BiVO<Subscript>4</Subscript> (Co-BiVO<Subscript>4</Subscript>) as a visible-light-driven photocatalyst for the degradation of malachite green and inactivation of harmful microorganisms in wastewater

Co-doped BiVO₄, a visible-light-responsive photocatalytic semiconductor, was synthesized using a microwave hydrothermal method. The doped sample exhibited much higher photocatalytic activity for malachite green degradation under visible light irradiation than undoped BiVO₄. Similarly, improved inactivation efficiency toward Escherichia coli and Chlamydomonas pulsatilla (green tide) were observed with Co-doped BiVO₄. The degradation of malachite green by Co-doped BiVO₄ reaches 99% within 90 min irradiation to visible light. Similarly, the inactivation of Escherichia coli reaches 81.3% in 5 h and Chlamydomonas pulsatilla reaches 65.6% in 1 h irradiation to visible light. The enhanced photoactivity is believed to be due to the increment of the visible light absorption range by narrowing the band gap energy. In addition, the highly exposed reactive (010) facets can efficiently capture the photoinduced electrons, promote charge separation, and reduce recombination probability. Thus, these findings provide mechanistic insight into the effectiveness of Co-doped BiVO₄ semiconductors for the treatment of wastewater that contains industrial effluents and microorganisms.     

Synthesis of Fe<Superscript>3+</Superscript> doped ordered mesoporous TiO<Subscript>2</Subscript> with enhanced visible light photocatalytic activity and highly crystallized anatase wall

Fe³⁺ doped mesoporous TiO₂ with ordered mesoporous structure were successfully prepared by the solvent evaporation-induced self-assembly process using P123 as soft template. The properties and structure of Fe³⁺ doped mesoporous TiO₂ were characterized by means of XRD, EPR, BET, TEM, and UV–vis absorption spectra. The characteristic results clearly show that the amount of Fe³⁺ dopant affects the mesoporous structure as well as the visible light absorption of the catalysts. The photocatalytic activity of the prepared mesoporous TiO₂ was evaluated from an analysis of the photodegradation of methyl orange under visible light irradiation. The results indicate that the sample of 0.50%Fe–MTiO₂ exhibits the highest visible light photocatalytic activity compared with other catalysts.     

Carbon-supported binary Li-Sn catalyst for acetylene hydrochlorination

The study of a novel catalyst containing LiCl and SnCl₂ (LiSn/AC) for acetylene hydrochlorination has been reported in this paper. Furthermore, the performance of both high activity (98.3%) and selectivity (>98.0%) are achieved by LiSn/AC catalysts under the reaction temperature of 200 °C and C₂H₂ hourly space velocity of 30 h^?1. The structural characteristics of the Sn based catalysts were deeply researched via BET, XRD, TEM, TPR, C₂H₂-TPD, XPS and TG techniques. According to these characteristic results, we proposed that the presence of Sn²⁺ exhibited better activity and stability than that of Sn⁴⁺ in Sn based catalysts. Additionally, LiCl additives not only can restrain the oxidation of Sn²⁺ and the loss of Sn⁴⁺ in fresh Sn based catalysts but also make the Sn^δ+ (δ = 2,4) species dispersed well on the surface of support. Therefore, the adsorption capacity of C₂H₂ and HCl was enhanced in LiSn/AC, which exhibited the better catalytic performance than that of Sn based catalyst.     

Excitation-wavelength-dependent fluorescent organohydrogel for dynamic information anti-counterfeiting

Anti-counterfeiting labels with various fluorescent colors are of great importance in information encryption-decryption, but are still limited to static information display. Therefore, it is urgent to develop new materials and encryption-decryption logic for improving the security level of secret information. In this study, an organohydrogel made up of poly(N,N-dimethylacrylamide) (pDMA) hydrogel network and polyoctadecyl methacrylate (pSMA) organogel network that copolymerized with two fluorophores, 6-acrylamidopicolinic acid moieties (6APA, fluorescent ligand) and spiropyran units (SPMA, photochromic monomer), was prepared by a two-step interpenetrating method. As UV light of 365 nm and 254 nm can both cleave C_spiro-O bonds of SPMA, and the green fluorescence of 6APA-Tb³⁺ can only be excited by 254 nm light, the organohydrogel displays yellow and red under the irradiation of 254 nm and 365 nm, respectively. In addition to wavelength selectivity, these two fluorophores are thermal-responsive, leading to the fluorescence variation of the organohydrogel during heating process. As a result, secret information loaded on the organohydrogel can be decrypted by the irradiation of UV light, and the authenticity of the information can be further identified by thermal stimulation. Our fluorescent organohydrogel can act as an effective anti-counterfeiting label to improve the information security and protect the information from being cracked.     

Coupling of Bifunctional CoMn‐Layered Double Hydroxide@Graphitic C3N4 Nanohybrids towards Efficient Photoelectrochemical Overall Water Splitting

The development of durable, low‐cost, and efficient photo‐/electrolysis for the oxygen and hydrogen evolution reactions (OER and HER) is important to fulfill increasing energy requirements. Herein, highly efficient and active photo‐/electrochemical catalysts, that is, CoMn‐LDH@g‐C₃N₄ hybrids, have been synthesized successfully through a facile in situ co‐precipitation method at room temperature. The CoMn‐LDH@g‐C₃N₄ composite exhibits an obvious OER electrocatalytic performance with a current density of 40 mA cm^?2 at an overpotential of 350 mV for water oxidation, which is 2.5 times higher than pure CoMn‐LDH nanosheets. For HER, CoMn‐LDH@g‐C₃N₄ (η₅₀=?448 mV) requires a potential close to Pt/C (η₅₀=?416 mV) to reach a current density of 50 mA cm². Furthermore, under visible‐light irradiation, the photocurrent density of the CoMn‐LDH@g‐C₃N₄ composite is 0.227 mA cm^?2, which is 2.1 and 3.8 time higher than pristine CoMn‐LDH (0.108 mA cm^?2) and g‐C₃N₄ (0.061 mA cm^?2), respectively. The CoMn‐LDH@g‐C₃N₄ composite delivers a current density of 10 mA cm^?2 at 1.56 V and 100 mA cm^?2 at 1.82 V for the overall water‐splitting reaction. Therefore, this work establishes the first example of pure CoMn‐LDH and CoMn‐LDH@g‐C₃N₄ hybrids as electrochemical and photoelectrochemical water‐splitting systems for both OER and HER, which may open a pathway to develop and explore other LDH and g‐C₃N₄ nanosheets as efficient catalysts for renewable energy applications.     

Titanium ketimide complexes as α-olefin homo- and copolymerisation catalysts. X-ray diffraction structures of [TiCp(NCBu2)Cl2] (Cp=Ind, Cp*)

The synthesis of [TiInd(NC^tBu₂)Cl₂] and the applications of [TiCp^′(NC^tBu₂)Cl₂] (Cp^′=Ind, Cp*, Cp) as ethylene and propylene homopolymerisation catalysts, as well as its behaviour as catalysts of ethylene and 10-undecen-1-ol copolymerisation are described. The optimisation of the catalytic reactions showed that all compounds are very active homopolymerisation catalysts, particularly [TiInd(NC^tBu₂)Cl₂] that gives 123.37 × 10⁶ g/(molTi [E] h) and 50.77 × 10⁶ g/(molTi [P] h) of linear polyethylene and atatic polypropylene, respectively. The less active homopolymerisation catalyst, [TiCp(NC^tBu₂)Cl₂], is the most effective ethylene/10-undecen-1-ol copolymerisation catalyst, leading to the highest degree of polar monomer incorporation. The polymers obtained were characterised by NMR and DSC. The molecular structures of [TiCp^′(NC^tBu₂)Cl₂] (Cp^′=Ind, Cp*) were determined by X-ray diffraction studies.     

One-step fabrication of mesoporous sulfur-doped carbon nitride for highly selective photocatalytic transformation of native lignin to monophenolic compounds

Photocatalytic selective transform native lignin into valuable chemicals is an attractive but challenging task. Herein, we report a mesoporous sulfur-doped carbon nitride (MSCN-0.5) which is prepared by a facile one-step thermal condensation strategy. It is highly active and selective for the cleavage Cα?C_β bond in β?O?4 lignin model compound under visible light radiation at room temperature, achieving 99% substrate conversion and 98% C_α?C_β bond cleavage selectivity. Mechanistic studies revealed that the C_β?H bond of lignin model compounds activated by holes and generate key C_β radical intermediates, further induced the C_α?C_β bond cleavage by superoxide anion radicals (^?O₂^?) to produce aromatic oxygenates. Waste Camellia oleifera shell (WCOS) was taken as a representative to further understand the reaction mechanisms on native lignin. 33.2 mg of monophenolic compounds (Vanillin accounted for 22% and Syringaldehyde for 34%) can be obtained by each gram of WCOS lignin, which is 2.5 times as that of the pristine carbon nitride. The present work offers useful guidance for designing metal-free heterogeneous photocatalysts for C_α?C_β bond cleavage to harvest monophenolic compounds.     

Tuning the band-gap energy of TiO2-xCx nanoparticle for high performance photo-catalyst

We describe a method tuning the band-gap energy (E_g) of visible light sensitive TiO_2-xC_x nanoparticle. E_g tends to become smaller with the increase in the amount of carbon dopant in TiO_2-xC_x nanoparticle due to the increase in excess electrons. Photo-catalytic oxidative activity, however, did not depend on only the value of E_g, but also the energy level of valence band. TiO_1.96C_0.04 nanoparticle having E_g of 2.6 eV showed outstanding performance in oxidative decomposition of phenol under the irradiation of visible light.     

Direct Observation of Dynamic Bond Evolution in Single‐Atom Pt/C3N4 Catalysts

Single‐atom catalysts are promising platforms for heterogeneous catalysis, especially for clean energy conversion, storage, and utilization. Although great efforts have been made to examine the bonding and oxidation state of single‐atom catalysts before and/or after catalytic reactions, when information about dynamic evolution is not sufficient, the underlying mechanisms are often overlooked. Herein, we report the direct observation of the charge transfer and bond evolution of a single‐atom Pt/C₃N₄ catalyst in photocatalytic water splitting by synchronous illumination X‐ray photoelectron spectroscopy. Specifically, under light excitation, we observed Pt?N bond cleavage to form a Pt⁰ species and the corresponding C=N bond reconstruction; these features could not be detected on the metallic platinum‐decorated C₃N₄ catalyst. As expected, H₂ production activity (14.7 mmol h^?1 g^?1) was enhanced significantly with the single‐atom Pt/C₃N₄ catalyst as compared to metallic Pt‐C₃N₄ (0.74 mmol h^?1 g^?1).     

Prereforming of <Emphasis Type="Italic">n</Emphasis>-tetradecane over Ce-promoted 50 wt% Ni/MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst with high coke resistance

The effect of Ce-promotion on 50 wt% Ni-based catalysts during the prereforming of n-tetradecane and its optimum content were investigated. The Ni catalyst was synthesized by deposition–precipitation method. Next, various amounts of Ce (0–13 wt%) were loaded on the Ni catalyst by impregnation. The characteristics of the prepared catalysts were analyzed by XRD, H₂-TPR, BET, BJH, and H₂-chemisorption analyses. The prepared catalysts were tested under the prereforming conditions (temperature = 400 °C, GHSV = 3000 h^?1, and S/C = 3 and 4). The Ni catalyst was easily deactivated under the following conditions: temperature = 400 °C, GHSV = 3000 h^?1, and S/C = 4. The stability of all Ce-promoted Ni catalysts was improved as compared to that of the Ni catalyst. Among the Ce-promoted catalysts, 5 wt% Ce/50 wt% Ni/MgO–Al₂O₃ catalyst showed excellent stability even under the severe condition of S/C = 3. SEM, TEM, and TG analyses were performed in order to identify the main factor responsible for the rapid deactivation of the Ni catalyst. In the case of 0Ce/50Ni, Ni particles were encapsulated by many folds of coke and it was related to the rapid catalyst deactivation. However, after Ce promoted on the Ni catalyst, the thickness of the coke layers and the number of encapsulated Ni particles decreased and the deposited amount of coke on the catalyst also decreased.     

Influences of Co-60 gamma-ray irradiation on electrical characteristics of Al2O3 MOS capacitors

Effects of gamma-ray irradiation on the electrical characteristics of Al₂O₃ MOS capacitors such as barrier height, acceptor concentration, series resistance and interface state parameters have been studied by analyzing capacitance–voltage (C–V) and conductance–voltage (G/ω–V) measurements. The fabricated MOS capacitors were irradiated with gamma-rays at doses up to five grays. C–V and G/ω–V measurements were recorded prior to and after irradiation at high frequency. The results show that the measured capacitance and conductance values decreased with increasing in irradiation dose and C–V and G/ω curves has been shifted toward the negative voltages. Moreover, the series resistance (R _s) and density of interface states increased with increasing in irradiation dose and density of interface states (D _it) were calculated as order of 10¹² eV^?1cm^?2 prior to and after irradiation. Due to presence and variations in the R _s values, the corrected and the measured C–V and G/ω–V exhibited different behaviors. Therefore other electrical characteristics were assessed from corrected C _c characteristics. It was observed that acceptor concentration decreased with increasing in barrier height of device due to changes in interface states and diffusion potential.     

Scalable Photoelectrochemical Dehydrogenative Cross‐Coupling of Heteroarenes with Aliphatic C−H Bonds

Heteroarenes are structural motifs found in many bioactive compounds and functional materials. Dehydrogenative cross‐coupling of heteroarenes with aliphatic C?H bonds provides straightforward access to functionalized heteroarenes from readily available materials. Established methods employ stoichiometric chemical oxidants under conditions of heating or light irradiation. By merging electrochemistry and photochemistry, we have achieved efficient photoelectrochemical dehydrogenative cross‐coupling of heteroarenes and C(sp³)?H donors through H₂ evolution, without the addition of metal catalysts or chemical oxidants. Mechanistically, the C(sp³)?H donor is converted to a nucleophilic carbon radical through H‐atom transfer with chlorine atom, which is produced by light irradiation of anodically generated Cl₂ from Cl^?. The carbon radical then undergoes radical substitution to the heteroarene to afford alkylated heteroarene products.     

CdS nanospheres hybridized with graphitic C3N4 for effective photocatalytic hydrogen generation under visible light irradiation

Graphitic carbon nitride (g‐C₃N₄)‐based photocatalysts have received considerable attention in the field of photocatalysis, especially for photocatalytic H₂ evolution. However, the intrinsic disadvantages of g‐C₃N₄ seriously limit its practical application. Herein, CdS nanospheres with an average diameter of 135 nm prepared using a solvothermal method were used as co‐catalysts to form CdS/g‐C₃N₄ composites (CSCN) to enhance the photocatalytic activity. Various techniques were employed to characterize the structure, composition and optical properties of the as‐prepared samples. It was found that the CdS nanospheres were relatively uniformly dispersed on the surface of g‐C₃N₄. Moreover, the photocatalytic H₂ generation activity of the samples was evaluated using lactic acid as sacrificial reagent in water under visible light irradiation. When the amount of CdS nanospheres loaded in the hybridized composites was 5 wt%, the optimal H₂ evolution rate reached 924 μmol g^?1 h^?1, which was approximately 1.4 times higher than that (680 μmol g^?1 h^?1) of Pt/g‐C₃N₄ (3 wt%). Based on the results of analysis, a possible mechanism for the photocatalytic activity of CSCN is proposed tentatively.