Solution-processable high-efficiency bis(trifluoromethyl)phenyl functionalized phosphorescent neutral iridium(III) complex for greenish yellow electroluminescence

A novel and highly efficient bis(trifluoromethyl)phenyl functionalized iridium(III) complex is designed and synthesized. The complex shows intensive greenish yellow phosphorescence (525?nm with 563?nm as shoulder), high photoluminescence efficiency (0.90) and moderate full width at half maximum (72?nm). The bulky bis(trifluoromethyl)phenyl moiety introduced into the complex provides the excellent solubility and effective steric hindrance for solution-processed organic light-emitting diodes. The maximum power efficiency and current efficiency of electroluminescence are 4.13?lm/W and 9.54?cd/A, respectively.     

Novel phosphorescent neutral iridium(III) complex with the steric hindrance for highly efficient red organic light-emitting diodes

A novel and highly efficient thiophenquinolone-based red iridium(III) complex bearing a bulky fluorophenyl moiety is designed and synthesized. The complex shows intensive red phosphorescence (596 nm with shoulder at 642 nm), high photoluminescence efficiency (0.62) and broad full width at half maximum (81 nm). The bulky fluorophenyl moiety introduced into the complex could improve the efficiency of electroluminescence with the maximum current efficiency, power efficiency and the external quantum efficiency up to 29.0 cd/A, 30.4 lm/W and 17.6% due to the effective steric hindrance in solid states.     

Sky-blue perovskite light-emitting diodes based on quasi-two-dimensional layered perovskites

A mixed organic(4-phenylbutylamine, 4-PBA) and inorganic(cesium, Cs) cations are used to deposit quasi-two-dimensional layered perovskites. This layered perovskites exhibit good film coverage as twodimensional perovskites and high emission performance close to three-dimensional organic–inorganic hybrid perovskites. Light-emitting diodes(LEDs) are fabricated by using solution process based on the quasi-two-dimensional layered perovskites. The perovskite LEDs exhibit a sky-blue emission with electroluminescence peak at 491 nm and a low turn on voltage at 2.9 V. The maximum external quantum efficiency reaches 0.015% at brightness of 186 cd/m~2.     

Synthesis of a highly phosphorescent emitting iridium(III) complex and its application in OLEDs

A rigid ligand benzo[de]benzo[4,5]imidazo[2,1-α]isoquinolin-7-one (biio) was designed and conveniently synthesized, and the corresponding bis-cyclometalated iridium complex (biio)₂Ir(acac) (acac = acetylacetone) was prepared. The light emitting and electrochemical properties of this complex were studied. The complex has the characters of simply synthetic procedure and strong phosphorescence. The electroluminescent device using this complex as dopant was fabricated. The device had the structure of ITO/NPB (40 nm)/Ir complex:CBP (7%, 30 nm)/BCP (15 nm)/Alq₃ (30 nm)/LiF (1 nm)/Al (100 nm). The maximum emission of the device was at 496 nm. The maximum brightness of the device can reach 79640 cd m⁻² with an external quantum efficiency of 12.1% and a maximum current efficiency of 31.7 cd A⁻¹.     

A purely organic D-π-A-π-D emitter with thermally activated delayed fluorescence and room temperature phosphorescence for near-white OLED

A purely organic D-π-A-π-D type emitter showing thermally activated delayed fluorescence(TADF) and room temperature phosphorescence(RTP) was designed and synthesized by utilizing the benzophenone as an acceptor and the N-phenyl-2-napthylamine as a donor moiety.It exhibits considerable TADF character in doped PMMA film and room temperature phosphorescence with a long lifetime of 74 ms at466 nm in solid state.The devices with the configuration of ITO/Mo_2 O_3(4 nm)/mCP(30 nm)/mCP:x wt%NP2 BP/TmTyPB(60 nm)/LiF(1.5 nm)/AI(100 nm) were prepared by vacuum evaporation to explore their electroluminescent performance.Intere stingly,the non-doped device has obtained near-white emission with a fluorescence emission peak at 475 nm and a phosphore scence emission peak at 563 nm having the CIE coordinate of(0.23,0.32) and the maximum external quantum efficiency of 1.09%.     

Long-lived room-temperature near-IR phosphorescence of BODIPY in a visible-light-harvesting N^C^N Pt(II)-acetylide complex with a directly metalated BODIPY chromophore

Room-temperature long-lived near-IR phosphorescence of boron-dipyrromethene (BODIPY) was observed (λ(em) = 770?nm, Φ(P) = 3.5?%, τ(P) = 128.4?μs). Our molecular-design strategy is to attach Pt(II) coordination centers directly onto the BODIPY π-core using acetylide bonds, rather than on the periphery of the BODIPY core, thus maximizing the heavy-atom effect of Pt(II). In this case, the intersystem crossing (ISC) is facilitated and the radiative decay of the T(1) excited state of BODIPY is observed, that is, the phosphorescence of BODIPY. The complex shows strong absorption in the visible range (ε = 53,800 M(-1) cm(-1) at 574?nm), which is rare for Pt(II)-acetylide complexes. The complex is dual emissive with (3)MLCT emission at 660?nm and the (3)IL emission at 770?nm. The T(1) excited state of the complex is mainly localized on the BODIPY moiety (i.e. (3)IL state, as determined by steady-state and time-resolved spectroscopy, 77?K emission spectra, and spin-density analysis). The strong visible-light-harvesting ability and long-lived T(1) excite state of the complex were used for triplet-triplet annihilation based upconversion and an upconversion quantum yield of 5.2?% was observed. The overall upconversion capability (η = ε×Φ(UC)) of this complex is remarkable considering its strong absorption. The model complex, without the BODIPY moiety, gives no upconversion under the same experimental conditions. Our work paves the way for access to transition-metal complexes that show strong absorption of visible light and long-lived (3)IL excited states, which are important for applications in photovoltaics, photocatalysis, and upconversions, etc.     

Stopped-flow determination of dipyridamole in pharmaceutical preparations by micellar-stabilized room temperature phosphorescence

The stopped flow mixing technique has been used to study the kinetic determination of dipyridamole by means of micellar-stabilized room temperature phosphorescence (RTP). This mixing system diminishes the time required for the deoxygenation of the micellar medium by sodium sulfite. The phosphorescence enhancers thallium (I) nitrate, sodium dodecyl sulfate (SDS), and sodium sulfite were optimized to obtain maximum sensitivity and selectivity. A pH value of 10.6 was selected as adequate for phosphorescence development. The kinetic curve of dipyridamole phosphorescence was scanned at λ_ex=303 nm and λ_em=616 nm. Then, the intensity at 10 s, and the maximum slope of phosphorescence development, for an interval time of 1 s, were measured. Two determination approaches: intensity and rate methods, were proposed. The calibration graphs were linear for the concentration range from 50 to 400 ng ml⁻¹. The detection limits, according to Clayton et al., Anal. Chem. 59 (1987) 2506, were 21.5 and 37.5 ng ml⁻¹, for intensity and initial rate measurements, respectively. By applying the error propagation theory, the detection limits were 19.0 and 33.0 ng ml⁻¹, for intensity and initial rate measurements, respectively. Two commercial formulations (persantin and asasantin) were analyzed by both proposed methodologies. Adequate recovery values were obtained in both cases.     

High Efficiency Sky-Blue Gold(III)-TADF Emitters**

Highly efficient sky-blue luminescent gold(III) complexes with emission quantum yields up to 82 %, lifetimes down to 0.67 μs and emission peak maxima at 470–484 nm were prepared through a consideration of pincer gold(III) donor–acceptor complexes. Photophysical studies and time-dependent density functional theory (TDDFT) calculations revealed that the emission nature of these gold(III) complexes is most consistent with TADF. Solution-processed OLEDs with these gold(III) complexes as dopants afforded electroluminescence maxima at 465–473 nm with FWHM of 64–67 nm and maximum external quantum efficiencies (EQEs) of up to 15.25 %. This research demonstrates the first example of gold(III)-OLEDs showing electroluminescence maxima at smaller than 470 nm, and highlights the potential of using gold(III)-TADF emitters in the development of high efficiency blue OLEDs and blue emissive dopant in WOLEDs.     

Wide-Range Color-Tunable Organic Phosphorescence Materials for Printable and Writable Security Inks

Organic materials with long-lived, color-tunable phosphorescence are potentially useful for optical recording, anti-counterfeiting, and bioimaging. Herein, we develop a series of novel host–guest organic phosphors allowing dynamic color tuning from the cyan (502 nm) to orange red (608 nm). Guest materials are employed to tune the phosphorescent color, while the host materials interact with the guest to activate the phosphorescence emission. These organic phosphors have an ultra-long lifetime of 0.7 s and a maximum phosphorescence efficiency of 18.2 %. Although color-tunable inks have already been developed using visible dyes, solution-processed security inks that are temperature dependent and display time-resolved printed images are unprecedented. This strategy can provide a crucial step towards the next-generation of security technologies for information handling.     

基于闭环二苯醚与磷氧基团的主体材料的合成及其在蓝色磷光有机发光二极管中的应用

本文通过多步有机反应制备了化合物9-苯基-9′-（4-二苯基氧化膦）苯基-氧杂蒽[diphenyl（4-（9-phenyl-9H-xanthen-9-yl）phenyl）phosphine oxide,DPPO],低温磷光发射光谱测试表明该化合物具有高的三线态能级（2.88eV）,它可以作为天蓝色磷光发光材料双（4,6-二氟苯基吡啶-N,C2）吡啶甲酰合铱[bis（3,5-difluoro-2-（2-pyridyl）phenyl-（2-carboxypyridyl）iridium（Ⅲ）,FIrpic,ET=2.62eV]的主体材料.将主体材料DPPO用于蓝色磷光有机发光二极管中,该器件在100cd/m2的亮度下,电流效率和流明效率分别达到30.6cd/A和19.2lm/W,最大外量子效率达到13.6%.     

Wide‐Range Color‐Tunable Organic Phosphorescence Materials for Printable and Writable Security Inks

Organic materials with long‐lived, color‐tunable phosphorescence are potentially useful for optical recording, anti‐counterfeiting, and bioimaging. Herein, we develop a series of novel host–guest organic phosphors allowing dynamic color tuning from the cyan (502 nm) to orange red (608 nm). Guest materials are employed to tune the phosphorescent color, while the host materials interact with the guest to activate the phosphorescence emission. These organic phosphors have an ultra‐long lifetime of 0.7 s and a maximum phosphorescence efficiency of 18.2 %. Although color‐tunable inks have already been developed using visible dyes, solution‐processed security inks that are temperature dependent and display time‐resolved printed images are unprecedented. This strategy can provide a crucial step towards the next‐generation of security technologies for information handling.     

Specific binding effects for cucurbit[8]uril in 2,4,6-triphenylpyrylium-cucurbit[8]uril host-guest complexes: observation of room-temperature phosphorescence and their application in electroluminescence

2,4,6-Triphenylpyrylium (TP(+)) forms host-guest complexes with cucurbiturils (CBs) in acidic aqueous solutions. (1)H NMR spectroscopic data indicates that complexation takes place by encapsulation of the phenyl ring at the four position within CB. Formation of the complex with CB[6] and CB[7] leads to minor shifts in the fluorescence wavelength maximum (lambda(fl)) or quantum yield (Phi(fl)). In sharp contrast, for complexes with CB[8], the emission results in the simultaneous observation of fluorescence (lambda(fl)=480 nm, Phi(fl)=0.05) and room-temperature phosphorescence (lambda(ph)=590 nm, Phi(ph)=0.15). The occurrence of room-temperature phosphorescence can be used to detect the presence of CB[8] visually in solution. Molecular modeling and MM2 molecular mechanics calculations suggest that this effect arises from locking the conformational mobility of the 2- and 6-phenyl rings as a result of CB[8] encapsulation. The remarkably high room-temperature phosphorescence quantum yield of the TP(+)@CB[8] complex has been advantageously applied to develop an electroluminescent cell that contains this host-guest complex. In contrast, analogous cells prepared with TP(+) or TP(+)@CB[7] fail to exhibit electroluminescence.     

Luminescent Palladium(II) Complexes with π‐Extended Cyclometalated [RC^N^NR′] and Pentafluorophenylacetylide Ligands: Spectroscopic,Photophysical, and Photochemical Properties

A series of cyclometalated Pd^II complexes that contain π‐extended R? C^N^N? R′ (R? C^N^N? R′=3‐(6′‐aryl‐2′‐pyridinyl)isoquinoline) and chloride/pentafluorophenylacetylide ligands have been synthesized and their photophysical and photochemical properties examined. The complexes with the chloride ligand are emissive only in the solid state and in glassy solutions at 77 K, whereas the ones with the pentafluorophenylacetylide ligand show phosphorescence in the solid state (λ_max=584–632 nm) and in solution (λ_max=533–602 nm) at room temperature. Some of the complexes with the pentafluorophenylacetylide ligand show emission with λ_max at 585–602 nm upon an increase in the complex concentration in solutions. These Pd^II complexes can act as photosensitizers for the light‐induced aerobic oxidation of amines. In the presence of 0.1 mol % Pd^II complex, secondary amines can be oxidized to the corresponding imines with substrate conversions and product yields up to 100 and 99 %, respectively. In the presence of 0.15 mol % Pd^II complex, the oxidative cyanation of tertiary amines could be performed with product yields up to 91 %. The Pd^II complexes have also been used to sensitize photochemical hydrogen production with a three‐component system that comprises the Pd^II complex, [Co(dmgH)₂(py)Cl] (dmgH=dimethylglyoxime; py=pyridine), and triethanolamine, and a maximum turnover of hydrogen production of 175 in 4 h was achieved. The excited‐state electron‐transfer properties of the Pd^II complexes have been examined.     

Time-resolved analysis of photoluminescence at a single wavelength for ratiometric and multiplex biosensing and bioimaging

Simultaneous analysis of luminescence signals of multiple probes can improve the accuracy and efficiency of biosensing and bioimaging. Analysis of multiple signals at different wavelengths usually suffers from spectral overlap, possible energy transfer, and difference in detection efficiency. Herein, we reported a polymeric luminescent probe, which was composed of a phenothiazine-based fluorescent compound and a phosphorescent iridium(iii) complex. Both luminophores emitted at around 600 nm but their luminescence lifetimes are 160 times different, allowing time-resolved independent analysis. As the fluorescence was enhanced in response to oxidation by hypochlorite and the phosphorescence was sensitive toward oxygen quenching, a four-dimensional relationship between luminescence intensity, fluorescence/phosphorescence ratio, hypochlorite concentration, and oxygen content was established. In cellular imaging, time-resolved photoluminescence imaging microscopy clearly showed the independent fluorescence response toward hypochlorite and phosphorescence response toward oxygen in separated time intervals. This work opens up a new idea for the development of multiplex biosensing and bioimaging.

A single-wavelength dual-emissive polymeric probe shows fluorescence enhancement toward ClO⁻ and phosphorescence quenching toward O₂, allowing simultaneously imaging cellular ClO⁻ and O₂via time-resolved photoluminescence imaging microscopy.     

Simple Synthesis of Red Iridium(III) Complexes with Sulfur-Contained Four-Membered Ancillary Ligands for OLEDs

Phosphorescent iridium(III) complexes have been widely researched for the fabrication of efficient organic light-emitting diodes (OLEDs). In this work, three red Ir(III) complexes named Ir-1, Ir-2, and Ir-3, with Ir-S-C-S four-membered framework rings, were synthesized efficiently at room temperature within 5 min using sulfur-containing ancillary ligands with electron-donating groups of 9,10-dihydro-9,9-dimethylacridine, phenoxazine, and phenothiazine, respectively. Due to the same main ligand of 4-(4-(trifluoromethyl)phenyl)quinazoline, all Ir(III) complexes showed similar photoluminescence emissions at 622, 619, and 622 nm with phosphorescence quantum yields of 35.4%, 50.4%, and 52.8%, respectively. OLEDs employing these complexes as emitters with the structure of ITO (indium tin oxide)/HAT-CN (dipyra-zino[2,3-f,2′,3′-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile, 5 nm)/TAPC (4,4′-cyclohexylidenebis[N,N-bis-(4-methylphenyl)aniline], 40 nm)/TCTA (4,4″,4″-tris(carbazol-9-yl)triphenylamine, 10 nm)/Ir(III) complex (10 wt%): 2,6DCzPPy (2,6-bis-(3-(carbazol-9-yl)phenyl)pyridine, 10 nm)/TmPyPB (1,3,5-tri(mpyrid-3-yl-phenyl)benzene, 50 nm)/LiF (1 nm)/Al (100 nm) achieved good performance. In particular, the device based on complex Ir-3 with the phenothiazine unit showed the best performance with a maximum brightness of 22,480 cd m⁻², a maximum current efficiency of 23.71 cd A⁻¹, and a maximum external quantum efficiency of 18.1%. The research results suggest the Ir(III) complexes with a four-membered ring Ir-S-C-S backbone provide ideas for the rapid preparation of Ir(III) complexes for OLEDs.     

Efficient electroluminescence from new lanthanide (Eu3+, Sm3+) complexes

The syntheses, structures, and electroluminescent properties are described for two new lanthanide complexes Ln(HFNH)3phen [HFNH = 4,4,5,5,6,6,6-heptafluoro-1-(2-naphthyl)hexane-1,3-dione; phen = 1,10-phenanthroline; Ln = Eu3+ (1), Sm3+ (2)]. Both complexes exhibit bright photoluminescence at room temperature (RT) due to the characteristic emission of Eu3+ and Sm3+ ion. Several devices using the two complexes as emitters were fabricated. The performances of these devices are among the best reported for devices using europium complex and samarium complex as emitters. The device based on 1 with the structure ITO/TPD (50 nm)/1:CBP (10%, 40 nm)/BCP (20 nm)/AlQ (30 nm)/LiF (1 nm)/Al (200 nm) exhibits the maximum brightness of 957 cd/m2, current efficiency of 4.14 cd/A, and power efficiency of 2.28 lm/W with a pure red Eu3+ ion emission. Especially, at the high brightness of 200 cd/m2, the device of 1 still has a high current efficiency of 2.15 cd/A. The device of 2 with a three-layer structure of ITO/TPD (50 nm)/2 (50 nm)/BCP (20 nm)/LiF (1 nm)/Al (200 nm) gives the maximum brightness of 42 cd/m2, current efficiency of 0.18 cd/A. By the comparison of the electroluminescent properties of devices based on Eu(TTA3phen (TTA = 2-thenoyltrifluoroacteonate) and 1, we conclude that the polyfluoration on the alkyl group of the ligand and the introduction of the long conjugate naphthyl group into the ligand improve the efficiency of 1-doped devices, especially at high current densities.     

非除氧条件下环糊精诱导咔唑室温磷光的研究

本文基于超分子化合物β-CD/咔唑/1,2-二溴乙烷的形成,成功建立了非除氧条件下咔唑的室温磷光(RTP)测定方法。同时,对比研究了在除氧或不除氧条件下不同重原子对咔唑RTP的影响,并详细考察了影响咔唑RTP的各种因素,如pH、1,2-二溴乙烷用量、β-CD的浓度及不同时间下咔唑的RTP信号的稳定性,最后进行了实际样品测定。结果表明,在1,2-二溴乙烷存在且不除氧条件下,最大激发和发射波长λex/λem为295/440nm,咔唑在2.0×10-5～4.5×10-5 mol/L范围内呈良好的线性关系,相关系数R=0.998,检出限为2.5×10-5 mol/L。     

Long-lived room-temperature deep-red-emissive intraligand triplet excited state of naphthalimide in cyclometalated Ir(III) complexes and its application in triplet-triplet annihilation-based upconversion

Cyclometalated Ir(III) complexes with acetylide ppy and bpy ligands were prepared (ppy = 2-phenylpyridine, bpy = 2,2'-bipyridine) in which naphthal (Ir-2) and naphthalimide (NI) were attached onto the ppy (Ir-3) and bpy ligands (Ir-4) through acetylide bonds. [Ir(ppy)(3)] (Ir-1) was also prepared as a model complex. Room-temperature phosphorescence was observed for the complexes; both neutral and cationic complexes Ir-3 and Ir-4 showed strong absorption in the visible range (ε=39,600 M(-1) cm(-1) at 402?nm and ε=25,100 M(-1) cm(-1) at 404?nm, respectively), long-lived triplet excited states (τ(T)=9.30?μs and 16.45?μs) and room-temperature red emission (λ(em)=640?nm, Φ(p)=1.4?% and λ(em)=627?nm, Φ(p)=0.3?%; cf. Ir-1: ε=16,600 M(-1) cm(-1) at 382?nm, τ(em)=1.16 μs, Φ(p)=72.6?%). Ir-3 was strongly phosphorescent in non-polar solvent (i.e., toluene), but the emission was completely quenched in polar solvents (MeCN). Ir-4 gave an opposite response to the solvent polarity, that is, stronger phosphorescence in polar solvents than in non-polar solvents. Emission of Ir-1 and Ir-2 was not solvent-polarity-dependent. The T(1) excited states of Ir-2, Ir-3, and Ir-4 were identified as mainly intraligand triplet excited states ((3)IL) by their small thermally induced Stokes shifts (ΔE(s)), nanosecond time-resolved transient difference absorption spectroscopy, and spin-density analysis. The complexes were used as triplet photosensitizers for triplet-triplet annihilation (TTA) upconversion and quantum yields of 7.1?% and 14.4?% were observed for Ir-2 and Ir-3, respectively, whereas the upconversion was negligible for Ir-1 and Ir-4. These results will be useful for designing visible-light-harvesting transition-metal complexes and for their applications as triplet photosensitizers for photocatalysis, photovoltaics, TTA upconversion, etc.     

Iridium(I) pyridyl azolate complexes with saturated red metal-to-ligand charge transfer phosphorescence; fundamental and potential applications in organic light-emitting diodes

Preparation of a new series of neutral metal complexes [(cod)Ir(fppz)] (1), [(cod)Ir(bppz)] (2), [(cod)Ir(fptz)] (3) and [(cod)Ir(bptz)] (4), bearing one cod ligand and a pyridyl azolate chelate are reported. A single-crystal X-ray diffraction study of 3 reveals the expected distorted square-planar geometry. The lowest absorption band consists of IrI atom increased triplet dpi-->pi* transitions (3MLCT), the assignment of which is firmly supported by the theoretical approaches. Complexes 1-4 exhibit weak phosphorescence in degassed solution at room temperature, whereas much more intense, solid-state phosphorescence appears in the range 622-649 nm. The pure MLCT emission was used as a prototypical model to address its remarkable spectral differences from the IrIII isoquinoline pyrrolide complex (5), which has mainly 3pipi phosphorescence. Complex 3 was used as a dopant to fabricate red-emitting phosphorescent organic light-emitting diodes (OLEDs). For the 7 % doped device, a maximum brightness of 3010 cd m-2 was achieved at an applied voltage of 15 V and with CIE coordinates of (0.56, 0.33), demonstrating for the first time the potential of neutral IrI complexes in OLED applications.     

Syntheses and phosphorescent properties of blue emissive iridium complexes with tridentate pyrazolyl ligands

Novel neutral mixed-ligand Ir(N=C=N)(N=C)X complexes (N=C=N = 1,3-bis(3-methylpyrazolyl)benzene (bpzb), 1,5-dimethyl-2,4-bis(3-methylpyrazolyl)benzene (dmbpzb), and 1,5-difluoro-2,4-bis(3-methylpyrazolyl)benzene (dfbpzb); N=C = 2-phenyl pyridine (ppy); and X = Cl or CN) have been synthesized and characterized. An X-ray single-crystal structure of the complex Ir(dmbpzb)(ppy)Cl shows that the nitrogen atom in the ppy ligand occupied the trans position to the carbon atom in the tridentate N=C=N ligand of dmbpzb with the Ir-C bond length of 1.94(1) A, whereas the coordinating carbon atom occupied the trans position of chlorine. Electrochemical data show that the complexes exhibit an oxidation Ir(III/IV) process in the potential range of +0.5 approximately 0.9 V and two irreversible reductions at approximately -2.6 and -3.0 V against Fc (0)/Fc (+), respectively. All of the Ir(III) complexes do not emit phosphorescence at room temperature, although strong phosphorescence is exhibited at 77 K with the 0-0 transition centered at around 450 nm and lifetimes of 3-14 mus. DFT calculations indicate that the HOMOs are mainly localized on iridium 5dpi and chlorine ppi*, whereas the LUMOs are mainly from the ppy ligand pi* orbitals. The phosphorescence originates from a (3)LC state mixed with the (3)MLCT and (3)XLCT ones. Temperature-dependent lifetime measurements of Ir(dfbpzb)(ppy)Cl reveal the existence of a thermal deactivation process with a low activation energy (1720 cm (-1)) and very high frequency factor (2.3 x 10 (13) s (-1)). An unrestricted density functional theory indicates that the dd state, in which both the Ir-N (pyrazolyl) bond lengths increase considerably, exists almost at the same energy as that for the phosphorescent state. A thorough analysis based on the potential energy surfaces for the T 1 and S 0 states allows us to determine the reaction pathway responsible for this thermal deactivation. The calculated activation energies of 1600 approximately 1800 cm (-1) are in excellent agreement with the observed values.