Free radical modification of LDPE with vinyltriethoxysilane

Chemical modification of low density polyethylene (LDPE) with vinyltriethoxysilane (VTES) was studied. The melt reactions were performed in a mixer and were initiated by thermal decomposition of a peroxide. The degree of functionalization was determined by Fourier transform infrared spectroscopy and Rutherford backscattering spectrometry. It was verified that the degree of functionalization increased with VTES and peroxide concentrations showing high conversion, up to 86 wt.%. No functionalization was observed in the absence of peroxide. Functionalized products showed some gel content and lower crystallinity than the parent homopolymer, affecting the stress/strain behavior. Yielding stress, elongation at break and elastic modulus decreased for the modified PE.     

Catalytic Markovnikov and anti-Markovnikov functionalization of alkenes and alkynes: recent developments and trends

The regioselective functionalization of terminal alkenes and alkynes is of utmost importance for the synthesis of a wide variety of organic products. Based on the original observation by Vladimir Markovnikov-the pioneer of this field of research-in the 19th century, the possible regioisomeric products are classified as Markovnikov or anti-Markovnikov products. Contrary to traditional belief, it is nowadays possible to control the regiochemistry of various additions of nucleophiles to alkenes and alkynes by applying different transition-metal catalysts. Recent developments in this area of selective functionalization of alkenes and alkynes are reviewed.     

Catalytic C-H amination for the preparation of substituted 1,2-diamines

Rhodium-catalyzed C-H insertion of hydroxylamine-derived sulfamate esters makes possible the synthesis of unique oxathiadiazinane heterocycles, which upon mild reduction furnish differentially substituted 1,2-diamine products. This highly chemo- and diastereoselective transformation underscores the power of catalytic C-H functionalization as a general approach to C-N bond construction.     

Zur Kenntnis des alkalischen Abbaus unterschiedlich hergestellter Kieselgele

Alkaline Degradation of Different Silica Gels During the alkaline degradation of silica gels it is possible by means of the molybdate method to get informations on the primary products of gel degradation. The average condensation degree of silicate anions in the resulting solutions is connected with the cross-linking degree of the silica gels. The differences in the degradation behaviour are discussed in dependence on the gel preparation conditions and in the series sol-hydrogel-xerogel.     

乙丙三元胶的功能化研究

用马来酸二丁酯（ＤＢＭ）对乙丙三元胶（ＥＰＤＭ）进行了功能化，在烃链上导入极性基团，以改善ＥＰＤＭ与含极性基团聚合物的相容性．红外光谱表明功能化反应确已发生．用电子顺磁共振波谱仪（ＥＳＲ）研究了热引发的机理，产物的功能化率由皂化水解反应测定；产物交联程度由凝胶量间接表征；用凝胶渗透色谱法（ＧＰＣ）表征产物的分子量分布。研究了反应温度、反应时间、单体用量和引发剂用量等对产物功能化率和凝胶量的影响。     

Effect of the electronic structure of carbon nanotubes on the selectivity of electrochemical functionalization

The functionalization of carbon nanotubes through electrochemical routes is gaining importance due to the high degree of control achievable and the ability to render the tubes with a variety of chemical and biological species. In this article, we report systematic investigations on the grafting of phenyl groups through diazonium coupling onto individual metallic and semiconducting carbon nanotubes both experimentally and theoretically. The results show clearly that by optimizing the electrochemical conditions it is possible to obtain a high degree of selectivity for the coupling of phenyl radicals onto metallic nanotubes. The outlined conclusions have strong implications for the design of strategies for the controlled functionalization of individual single-wall carbon nanotubes.     

Separation of single-walled carbon nanotubes on silica gel. Materials morphology and Raman excitation wavelength affect data interpretation

In this report, procedures are discussed for the enrichment of single-walled carbon nanotube (SWNT) types by simple filtration of the functionalized SWNTs through silica gel. This separation uses nanotube sidewall functionalization employing two different strategies. In the first approach, a crude mixture of metallic and semiconducting SWNTs was heavily functionalized with 4-tert-butylphenyl addends to impart solubility to the entire sample of SWNTs. Two major polarity fractions were rapidly filtered through silica gel, with the solvent being removed in vacuo, heated to 700 degrees C to remove the addends, and analyzed spectroscopically. The second approach uses two different aryldiazonium salts (one with a polar grafting group and one nonpolar), appended selectively onto the different SWNTs by means of titration and monitoring by UV analysis throughout the functionalization process. The different addends accentuate the polarity differences between the band-gap-based types permitting their partial separation on silica gel. Thermal treatment regenerated pristine SWNTs in enriched fractions. The processed samples were analyzed and characterized by Raman spectroscopy. A controlled functionalization method using 4-fluorophenyl and 4-iodophenyl addends was performed, and XPS analyses yielded data on the degree of functionalization needed to affect the van Hove singularities in the UV/vis/NIR spectra. Finally, we demonstrate that relative peak intensity changes in Raman spectra can be caused by morphological changes in SWNT bundling based on differing flocculation or deposition methods. Therefore a misleading impression of separations can result, underscoring the care needed in assessing efficacies in SWNT enrichment and the prerequisite use of multiple excitation wavelengths and similar flocculation or deposition methods in comparative analyses.     

Thiocarbamoyl chitosan as a novel sorbent with high sorption capacity and selectivity for the ions of gold(III), platinum(IV), and palladium(II)

Thiocarbamoyl chitosan (TCC) was synthesized by grafting thiourea on chitosan backbone in eutectic composition of ammonium thiocyanate—thiourea. Insoluble products with the amno group functionalization degree of 0.3–1.1 can be prepared by varying the conditions of polymer-analogous (synthesis in a gel) transformation. Structure of the synthesized chitosan derivatives was characterized by elemental analysis, diffuse reflectance infrared spectroscopy, and the solid state ¹³C NMR. Study of sorption properties of TCC shows high sorption capacity and selectivity for the ions of gold(III), platinum(IV), and palladium(II) as evidenced by results obtained at pH 2 in the presence of 100–1000-fold excess of iron(III), copper(II), zinc(II), and nickel(II). Sorption capacity of TCC for all ions increases with the increase in the degree of substitution and changes in the series: Au^III > Pd^II > Pt^IV.     

Low-Loss Photopatternable Hybrid Sol–Gel Materials

Hybrid sol–gel technology has proved its usefulness in the field of micro-optics. Indeed, it makes it possible to manufacture optical microcomponents by processes much simpler than those currently used, particularly when photopatternable materials are employed. However, for wavelengths in the near infrared window (NIR), this process is confronted with a major problem which results from the significant optical absorption of this type of materials, in particular around 1550 nm. The aim of this paper is to describe the origin of the losses of some hybrid sol–gel materials of direct interest in micro-device fabrication in order to propose solutions to achieve a greater transparency in the NIR region. The intrinsic absorption of the precursors was first of all considered since it is crucial to pursue the final goal of decreased losses. Then, the principal parameters of the sol–gel synthesis were studied. Among them, the thermal treatment conditions, the hydrolysis ratio and the controlled addition of transition metal alkoxides allow an improvement of the material transparency, at 1550 nm most particularly. This last point was considered with the highest attention, and NIR and NMR spectroscopies were employed to explain how the addition of zirconium alkoxides at the end of the reaction makes it possible to considerably decrease the losses in the material.     

猪胰脂肪酶的固定化及其在有机相中催化丁酸甲酯和正丁醇的酯交换反应研究

考察了大孔苯乙烯－二乙烯苯交联共聚物的交联度、致孔剂量及胺化试剂对载体固定化猪胰脂肪酶的影响。选择出一种最佳载体对猪胰脂肪酶进行固定化，对比了自由酶和固定化酶在有机相中催化丁酸甲酯和正丁醇的酯交换反应。结果表明，酶经固定化后催化反应活力比自由酶提高近１倍。     

GRAFTED STYRENE-DIVINYLBENZENE COPOLYMERS CONTAINING BENZALDEHYDES AND THEIR WITTIG REACTIONS WITH VARIOUS PHOSPHONIUM SALTS

A chloromethylated styrene-divinylbenzene copolymer support system functionalized with 4-benzaldehyde and 2-benzaldehyde was prepared.The degree of functionalization with aldehyde groups is well suited for the subsequent use of the products as Wittig reagents.The polymer bound aldehyde was reacted with Wittig reagents to give olefin groups grafted on styrene-divinylbenzene copolymers.The reactions were carried out in phase transfer catalysis conditions.A simple procedure for the calculation of the degree of functionalization and the statistical modeling of the structural repetitive unit of the copolymer are reported.     

Phenylboronate‐diol crosslinked polymer/SWCNT hybrid gels with reversible sol–gel transition

This work demonstrates the successful incorporation of functionalized single‐walled carbon nanotubes (f‐SWCNTs) into the phenylboronate‐diol crosslinked polymer gel to create a hybrid system with reversible sol–gel transition. The phenylboronic acid‐containing and diol‐containing polymers were first separately prepared by the reversible addition–fragmentation chain transfer polymerization. Covalent functionalization of single‐walled carbon nanotubes (SWCNTs) with an azide‐derivatized, diol‐containing polymer was then accomplished by a nitrene addition reaction. Subsequently, the hybrid gels were prepared by crosslinking the mixture of f‐SWCNTs and diol‐containing polymer with the phenylboronic acid‐containing polymer. The hybrid gel has been characterized by scanning electron microscopy (SEM) and rheological analysis. The SEM measurement demonstrated a homogeneous dispersion of f‐SWCNTs within the gel matrices. Rheological experiments also demonstrated that the hybrid gel exhibited storage moduli significantly higher than those of the native gel obtained from the phenylboronic acid‐containing and diol‐containing polymers. The hybrid gel can be switched into their starting polymer (f‐SWCNTs) solutions by adjusting the pH of the system. Moreover, the hybrid gel revealed a self‐healing property that occurred autonomously without any outside intervention. By employing this dynamic character, it is possible to regenerate the used gel, and thus, it has the potential to perform in a range of dynamic or bioresponsive applications Copyright © 2013 John Wiley & Sons, Ltd.     

Correlation between gelation time, structure and texture of low-doped silica gels

It is shown how the properties of a porous silica xerogel prepared using a classical sol-gel synthesis can be fine-tuned by a minor modification of the composition. The addition of a doping cation (Cu(2+), Ca(2+), Na(+)) in trace quantities in the silica sol was found to exert a dramatic effect at all stages of material preparation. An investigation of both liquid and solid phases is presented, making it possible to highlight strong correlations. The time-resolved speciation of Si-containing moieties in the sol was found to be an indication of the structuration of the gel, which was reflected by the porosity and by the molecular structure of the resulting porous material. Based on a careful comparison of several slightly doped silica gels, a model is proposed which makes it possible to predict the structure and the texture of a silica gel from data recorded early in the liquid phase.     

表面起伏光栅形成速率的影响规律 Ⅰ.偶氮生色团种类和官能度的影响

设计并合成了含有不同生色团以及不同官能度的环氧树脂基偶氮高分子 ,系统研究了偶氮生色团的种类和官能度对光栅形成速率的影响规律 .实验结果表明 ,偶氮苯对位是羧基的聚合物的光栅形成速率明显快于偶氮苯对位是硝基的聚合物 ,光栅形成速率随偶氮生色团官能度的增加而加快 .这两类聚合物都可以形成规整的可擦式表面起伏光栅     

Quantitative amine functionalization of polymeric organolithium compounds with 3‐dimethylaminopropyl chloride in the presence of lithium chloride

The addition of lithium chloride promoted the coupling reaction of hydrocarbon solutions of poly(styryl)lithium (PSLi) and poly(isoprenyl)lithium (PILi) with 3‐dimethylaminopropyl chloride to form the corresponding ω‐dimethylamino‐functionalized polymers. Quantitative amine functionalization was achieved for PSLi and PILi in the presence of 1 and 10 equivalents, respectively, of LiCl in benzene; the functionalization efficiency was only 67% for PSLi and 85% for PILi in the absence of LiCl. The polymer products were characterized by size exclusion chromatography, thin‐layer chromatography, and amine end‐group titration. The pure amine‐functionalized polymers were isolated by silica gel column chromatography. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 145–151, 2000     

Carbene‐Mediated Functionalization of the Anomeric C?H Bond of Carbohydrates: Scope and Limitations

Herein we investigate the scope and limitations of a new synthetic approach towards α‐ and β‐ketopyranosides relying on the functionalization of the anomeric C? H bond of carbohydrates by insertion of a metal carbene. A key bromoacetate grafted at the 2‐position is the cornerstone of a stereoselective glycosylation/diazotransfer/quaternarization sequence that makes possible the construction of a quaternary center with complete control of the stereochemistry. This sequence shows a good tolerance toward protecting groups commonly used in carbohydrate chemistry and gives rise to quaternary disaccharides with good efficiency. In the case of a disaccharide with a more restricted conformation, this functionalization process can be hampered by the steric demand next to the targeted anomeric position. In addition, the formation of transient orthoesters during the glycosylation step may also reduce the overall efficiency of the synthetic sequence.     

A new and general method for the synthesis of tripeptide aldehydes based on the multi-component Ugi reaction

Tripeptide aldehydes, such as Z-Leu-Leu-Leu-H (MG-132), are an important class of compounds due to their biological activity. A new, general method for the synthesis of tripeptide aldehydes based on the multi-component Ugi reaction was developed. A careful choice of isocyanides makes it possible to obtain tripeptide precursors whose functionalization led to target structures. This method can be used for the preparation of tripeptide aldehydes with non-natural amino acid side chains.     

Controlled Covalent Functionalization of 2 H-MoS2 with Molecular or Polymeric Adlayers

Most air-stable 2D materials are relatively inert, which makes their chemical modification difficult. In particular, in the case of MoS₂, the semiconducting 2 H-MoS₂ is much less reactive than its metallic counterpart, 1T-MoS₂. As a consequence, there are hardly any reliable methods for the covalent modification of 2 H-MoS₂. An ideal method for the chemical functionalization of such materials should be both mild, not requiring the introduction of a large number of defects, and versatile, allowing for the decoration with as many different functional groups as possible. Herein, a comprehensive study on the covalent functionalization of 2 H-MoS₂ with maleimides is presented. The use of a base (Et₃N) leads to the in situ formation of a succinimide polymer layer, covalently connected to MoS₂. In contrast, in the absence of base, functionalization stops at the molecular level. Moreover, the functionalization protocol is mild (occurs at room temperature), fast (nearly complete in 1 h), and very flexible (11 different solvents and 10 different maleimides tested). In practical terms, the procedures described here allow for the chemist to manipulate 2 H-MoS₂ in a very flexible way, decorating it with polymers or molecules, and with a wide range of functional groups for subsequent modification. Conceptually, the spurious formation of an organic polymer might be general to other methods of functionalization of 2D materials, where a large excess of molecular reagents is typically used.     

Terminal anhydride functionalization of polystyrene

Polystyrene chains with terminal anhydride groups were synthesized by direct chain transfer reaction between poly(styryl) lithium and trimellitic anhydride chloride (TMAC) and by the alkoxy-de-halogenation reaction between TMAC and hydroxy terminated polystyrene. Pyridine was used as a catalyst for these nucleophilic substitution reactions. For the direct reaction a poly(styryl) lithium with M?_n ～ 1000 (a low MW was used for characterization purposes) was prepared in an argon purged reactor and then introduced into an excess of trimellitic anhydride chloride. Due to the nature of our reaction system, the molecular weight distributions obtained were broader than those possible using more stringent high vacuum techniques. Hydroxy terminated polystyrenes with M?_n = 3,000 and 13,000 obtained elsewhere were used for the indirect addition of terminal anhydride groups. ¹H-NMR spectroscopy, gel permeation chromatography (GPC), and FTIR spectroscopy were used to characterize the reaction products. A maximum yield of 61% for the direct functionalization route and 85% for the indirect functionalization route using hydroxyl terminated polystyrene were achieved. The higher yield of the indirect method seems to be the result of the relatively mild reactivity of the hydroxyl group.     

Features of Functionalization of MCM-41 Silica Mesoporous Molecular Sieves during Their Template Synthesis

We have shown that functionalization of MCM-41 mesoporous molecular sieves during their template synthesis using the effect of solubilization of organic hydrophobic co-condensing compounds makes it possible to obtain highly ordered mesoporous molecular sieves, with concentrations of vinyl or allyl groups covalently bonded to the surface of the silica matrix of about 3.5 mmol/g, which after sulfonation have acidic properties and exhibit catalytic activity in the process of ethyl tert-butyl ether synthesis.