Magneto-responsive hybrid materials based on cellulose nanocrystals

We fabricated self-standing films of cellulose nanocrystals (CNC) and electrospun composite fibers with CNC and polyvinyl alcohol both with magnetic properties arising from cobalt iron oxide nanoparticles in the CNC matrix. Aqueous dispersions of cobalt-iron oxide nanoparticles (10–80 nm diameter) and CNCs (ca. 150 nm length) were used as precursor systems for the films and composite fibers. The properties of the hybrid material were determined by electron and atomic force microscopy, X-ray diffraction, thermogravimetry and magnetometry. The CNC-inorganic system was ferromagnetic, with a saturation magnetization of ca. 20 emu g^?1 of the magnetic phase. We demonstrate potential applications of the precursor dispersions, including magnetic fluid hyperthermia and highlight possible uses of the CNC-based magneto-responsive systems in biomedical and magneto-optical components.     

Preparation,surface morphology,and optical properties of indium(III) oxide nanoparticles by thermolysis of indium–poly(vinyl alcohol) coordination polymer

First report on the preparation of well-dispersed, indium(III) oxide (In₂O₃) nanoparticles with 22–35?nm size by polymer thermolysis is presented. Indium–poly(vinyl alcohol) (PVA) coordination polymer films were prepared by ‘solution casting technique’ from the homogeneous aqueous solution of coordination polymer prepared using PVA and indium(III) nitrate as starting materials; subsequently the films were calcined at 550?°C to yield In₂O₃ nanoparticles. Both indium–PVA coordination polymer that served as the precursor and the titled nanoparticles were characterized by Fourier transform-infrared spectroscopy, photoluminescence (PL), powder X-ray diffraction (XRD), transmission electron microscopy, and thermal analysis. Room temperature PL spectra of the prepared indium oxide nanoparticles showed intense blue emissions around 360, 410 and 430?nm, characteristic of indium oxide nanoparticles due to oxygen vacancies. The lower energy PL emission decreases with an increase of indium(III) content in the precursor. The size of the nanoparticles calculated from line broadening of XRD pattern (cubic; JCPDS: 06-0416) was found to be around 24?nm. The average particle size of the synthesized nanoparticles increased with metal ion content in the precursor coordination polymer.     

Mechanical properties of epoxy composites based on silver nanoparticles formed in situ

The mechanical and thermomechanical properties of metal-containing epoxy composite films based on silver nanoparticles synthesized in situ are investigated. There is a nonmonotonic dependence of the mechanical properties on the concentration of silver myristate used as a precursor. It is found for the first time that the breaking strength and elastic modulus increase by a factor of 1.8–1.5 relative to those of the unmodified matrix at a small concentration of precursor nanoparticles (on the order of 0.1 wt %). DSC and thermomechanical studies reveal that the glass-transition temperature decreases slightly (by 5–6°C) as the precursor concentration is increased to 0.5 wt %, thereby suggesting a weak plasticization of the modified epoxy matrix. On the basis of the spectrophotometry data measured in the region of surface plasmon resonance of silver nanoparticles (420–425 nm) and SEM data, it is inferred that the in situ strengthening of an epoxy nanocomposite based on epoxy resin ED-20, triethylamine, and silver myristate is attained because silver nanoparticles smaller than 20 nm in size and having a narrow particle-size distribution are formed during curing.     

Preparation of CuCrO2 nanoparticles with narrow size distribution by sol–gel method

Copper chromium oxide (CuCrO₂) nanoparticles were synthesized by sol–gel method. The effect of annealing temperature, duration of heat treatment and metallic ion concentration in precursor solution on the structural properties of the nanoparticles was investigated. The delafossite structure of CuCrO₂ powder was confirmed by X-ray diffractometer. It was found that the crystallite sizes as well as the size of the nanoparticles increased with annealing temperature and duration of heat treatment but decreased with metallic ion concentration. Nanoparticles’ size was obtained using particle size analyzer. The synthesized CuCrO₂ nanoparticles with 0.7 M metallic ion concentration have the lowest crystallite and particle sizes with a narrow size distribution in the range of 13.5–15.6 nm. In the presence of this metallic ion concentration, we could also produce single crystal CuCrO₂ nanoparticles. Moreover, the CuCrO₂ nanoparticles exhibit a large optical band gap that increases with metallic ion concentration. The optical band gap of the nanoparticles fabricated with 0.7 M metallic ion concentration in precursor solution is about 3.99 eV.     

Radiation-assisted synthesis of iridium and rhodium nanoparticles supported on polyvinylpyrrolidone

The controlled synthesis of rhodium (Rh) and iridium (Ir) nanoparticles was carried out by gamma irradiation of aqueous solutions containing the metal precursor salt and polyvinylpyrrolidone (PVP). The nanoparticles were synthesized at various PVP and precursor concentrations with absorbed doses between 20 and 60 kGy. Nanoparticles with average sizes of 2.4 and 2.6 nm and narrow particle size distributions were obtained at metal precursor/PVP concentrations of 6/0.3 and 6/3 mM for Ir and Rh when irradiated at 60 kGy. The interaction of the nanoparticles surfaces with the PVP was studied.     

Preparation and characteristics of spinnable sol and continuous mullite fibers with nano silica addition

The spinning precursor sols for the continuous mullite-based fibers were prepared by adding nano-silica to substitute part of silica sol. The effect of SiO₂ nanoparticles on the particle evolution models, polymerization degree and solid content of the sol,and the spinning length and sintering behavior of the fibers was investigated. The results were shown that the addition of nano silica enhanced the polymerization degree and extended the spinnable range of the sol. The appropriate polymerization degree (B value) for this sol system was 1.885–2.145. The grain diameter decreased from 39.6 to 25.9 nm with increasing the nano-silica content to 20 %, and then, it increased to 41.2 nm with increasing the nano-silica content to 100 %. The appropriate content of nano-silica powders would reduce the grain diameter. However, it had no influence on the linear growth model, homogeneity and solid content of the precursor sol.     

Silver Metallic Nanoparticles with Surface Plasmon Resonance: Synthesis and Characterizations

Silver nanoparticles were synthesized by the reduction of the silver nitrate (AgNO₃) using the latex copolymer in ethanol solution under microwave (MW) heating. The reaction parameters such as silver precursor concentration (from 0.005 to 0.1 g/l) and MW power (200–800 W) significantly affect the formation rate, shape, size and distribution of the silver nanoparticles. A significant reduction of irradiation time was observed when the MW energy is compared to conventional thermal reduction processes. The prepared silver nanoparticles show uniform and stable sizes from 5 to 11 nm, which can be stored at room temperature for approximately 12 months without any visible change. These peculiarities indicate that the latex copolymer is a good stabilizer for the silver nanoparticles. The optical properties, morphology, and crystalline structure of the silver-latex copolymer nanocomposites were characterized by the Ultraviolet–Visible spectroscopy, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The study of the TEM images at high magnifications identified the silver nanoparticles as face-centered cubic (fcc) structure with spherical and hexagonal shapes.     

Preparation of size‐controlled In2O3 nanoparticles

Highly crystalline and monodisperse In₂O₃ nanoparticles were successfully prepared by thermal decomposition of In(dipy)₃Cl₃·2H₂O in oleylamine and oleic acid under inert atmosphere. The size of In₂O₃ nanoparticles could be readily tuned from 10–15 nm to 40–50 nm, depending on the molar ratio of precursor to combined solvent in the reaction system. As‐synthesized In₂O₃ nanoparticles have a center‐body cubic structure as characterized by powder X‐ray diffraction and selected‐area electron diffraction. Transmission electron microscopy images showed that In₂O₃ nanoparticles have a narrow size distribution. A relatively strongly PL peak centered at 378 nm could be clearly seen when 10–15 nm In₂O₃ nanoparticles redispersed in cyclohexane were excited at 275 nm at room temperature. Copyright © 2007 John Wiley & Sons, Ltd.     

Structure,optical and magnetic properties of LaFeO3 nanoparticles prepared by polymerized complex method

This work reports the study the structure, optical and magnetic properties of LaFeO₃ nanoparticles synthesized by the polymerized complex method. The LaFeO₃ nanoparticles were successfully obtained from calcination of the precursor at different temperatures from 750 to 1,050 °C in air for 2 h. The calcined LaFeO₃ nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV–Visible spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge spectroscopy (XANES) and vibrating sample magnetometry. The XRD and TEM results showed that all LaFeO₃ samples had a single phase nature with the orthorhombic structure. The estimated crystallite sizes were in the range of 44.5 ± 2.4–74.1 ± 4.9 nm. UV–Vis spectra showed strong UV and Vis absorption with small band gap energy. The valence states of Fe ions were in the Fe³⁺ and Fe⁴⁺ state, as confirmed by XPS and XANES results. The weak ferromagnetic behavior with specific saturation magnetization of 0.1 emu/g at 10 kOe was obtained for the small particle of 44.5 ± 2.4 nm. The uncompensated spins at the surface was proposed as playing a part in the magnetic properties of small sized LaFeO₃.     

Nano Silicon from Nano Silica Using Natural Resource (Rha) for Solar Cell Fabrication

Abstract

High purity (～99%) nano silica with an average particle size of ～100 nm was extracted at pH 3 at 650°C from a natural resource, rice husk, using alkaline extraction followed by acid precipitation method. Using nano silica as a precursor, silicon (Si) nanoparticles have been synthesized by high-temperature magnesiothermic reduction method. The prepared sample was characterized by X-ray diffraction, particle size analyzer, Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray fluorescence analyzer, and UV–Vis spectroscopy. The comprehensive characterization studies indicate the pure phase formation of Si and the variation of particle size from 70 nm to 100 nm for samples synthesized at different sintering temperatures. Moreover, the silicon nanoparticles produced at 850°C have pure phase formation, high purity, and good absorption peaks. The efficiency calculated through IV characteristics is found to be increasing in silicon and ruthenium combination (2.67%), which is better than that achieved from the conventional solar cells. The produced silicon nanoparticles could be applied as an anode material for solar cell fabrication.     

Hyperbranched polyesterpolyols as components of amperometric monoamine oxidase biosensors based on electrodes modified with nanomaterials for determination of antidepressants

The use of hyperbranched polyesterpolyols of different generations favors firmer fixation of carbon nanotubes and silver nanoparticles as components of composite materials on the electrode surface (0.028 mg cm^–2), which improves the operation characteristics of monoamine oxidase biosensors. The size of silver nanoparticles (18–52 nm) depends on the conditions for preparing hyperbranched polyesterpolyols, and their use as electrode modifiers influences the analytical possibilities of amperometric biosensors. Silver nanoparticles (18 nm, data of atomic force microscopy) in polyesterpolyols of third generation (pH 10.0) as components of the developed biosensors extend the interval of determinable concentrations to 1 × 10^–4–1 × 10^–8 M and decrease the lower limit of determination to 3 × 10^–9 M, compared to the unmodified sensors, owing to enhancement of the analytical signal. The developed biosensors were tested in monitoring of drugs (antidepressants) in Coaxil and Auroriks drug forms with the relative standard deviation on the level of 0.052.     

The Structure‐Controlling Solventless Synthesis and Optical Properties of Uniform Cu2S Nanodisks

Uniform Cu₂S nanodisks have been synthesized from a well‐characterized layered copper thiolate precursor by structure‐controlling solventless thermolysis at 200–220 °C under a N₂ atmosphere. The development from small Cu₂S nanoparticles (diameter ≈3 nm) to nanodisks (diameter 8.3 nm) and then to faceted nanodisks (diameter 27.5 nm, thickness 12.7 nm) is accompanied by a continuous phase transition from metastable orthorhombic to monoclinic Cu₂S, the ripening of small particles by aggregation, and finally the crystallization process. The growth of the nanoproduct is constrained by the crystal structure of the precursor and the in situ‐generated thiol molecules. Such controlled anisotropic growth leads to a nearly constant thickness of faceted nanodisks with different diameters, which has been confirmed by TEM observations and optical absorption measurements.     

Structure and Stability of Gold Nanoparticles Synthesized Using <Emphasis Type="Italic">Schinus molle</Emphasis> L. Extract

In this work, we exhibited the results of the green synthesis of gold nanoparticles by aqueous extract of Schinus molle L. leaves. The chemical reaction was carried out by varying the plant extract/precursor salt ratio concentration in the aqueous solution. The structural characterization of the nanoparticles was performed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). XRD analysis showed that the as-synthesized AuNPs have a face-centered cubic structure. SEM and TEM observations indicated that most of the obtained particles have multiple twinning structures (MTP). The synthesized Au-MTP have particle sizes in the range of 10–60 nm, most of them with an average size of about 24 nm. However, triangular Au plate particles were also obtained, having an average size of 180 nm. Fourier transforms infrared spectroscopy and shows that the functional groups responsible for the chemical reduction of AuNPs are phenolic compounds present in the S. molle L. leaf.     

Preparation of nanoscale cellulose materials with different morphologies by mechanical treatments and their characterization

Rod-like cellulose nanowhiskers and spherical cellulose nanoparticles were prepared from wood-pulp-derived cellulose powder by mechanical refining processes such as high-pressure homogenization (HPH) and ball-milling (BM). The nanowhiskers obtained by the HPH method were found to be 200–500 nm long and 11–16 nm wide. The diameters of the nanoparticles were in the range 40–200 nm, depending on the BM time, and were reduced to 25–50 nm after extra HPH. By adjusting the BM time, cellulose nanoparticles having different polymorphs with similar morphologies were prepared. The X-ray diffraction patterns revealed the recrystallization of cellulose I (1 h of BM time) or cellulose II (4–8 h of BM time) in ball-milled nanoparticles after water washing and solvent exchange treatments. The nanowhisker widths derived from the specific surface areas (SSA) by adsorption methods such as Congo red dye, nitrogen, and water vapor, sorptions were in agreement with those obtained from transmission electron microscopy and atomic force microscopy images. Similar SSA values were obtained for micro- and nano-scale cellulose materials using water vapor adsorption methods, and the SSAs of nanoparticles obtained by different adsorption methods are also discussed.     

Nonhydrolytic sol–gel and gram-scale synthesis of surfactant-free maghemite nanoparticles with high surface area

An organic molecule was used as a surfactant for nanoparticle synthesis in liquid phase. However, residual molecules on the surface of the nanoparticles limit their catalytic applications, because the interaction of a reactant with the nanoparticle surface is interrupted. Therefore, it is favorable for catalytic applications that the organic molecule used in the synthesis of nanoparticles only induces a sol–gel reaction of the metal precursors and the formation of nanoparticles and hardly adheres to the resulting nanoparticles. Herein, we report surfactant-free and high-surface area maghemite nanostructures via nonhydrolytic sol–gel reaction. Using Fe(acetylacetonate)₃ as an iron precursor and hexylamine as a solvent and growth inhibitor, Fe₂O₃ nanoparticles were generated by nonhydrolysis of the iron complex and condensation at 140 °C under an air atmosphere. Characterization revealed monodisperse nanoparticles with an average size of 2.3 nm and a crystalline phase of maghemite. Residual hexylamine is hardly observed, and thus their specific surface area is 403.7 m²/g. An experimental comparison of the Fe₂O₃ synthesis with hexylamine and benzylamine indicates that the cone angle of an organic molecule is an important factor in the synthesis of nanoparticles with a small size and high surface area.     

硫化铅纳米材料合成的新方法

以硫代碳酸盐为原料 ,用室温液相反应合成出前驱物硫代碳酸铅 ,在高压釜中 10 0℃加热 2h即得纳米PbS .用X射线粉末衍射 ,透射电镜对产物的组成、大小、形貌进行表征 .结果表明 ,产物纳米PbS为立方晶系结构 ,平均粒径为 2 0nm     

A Critical Assessment of the Specific Role of Microwave Irradiation in the Synthesis of ZnO Micro‐ and Nanostructured Materials

A rapid, microwave‐assisted hydrothermal method has been developed to access ultrafine ZnO hexagonal microrods of about 3–4 μm in length and 200–300 nm in width by using a 1:5 zinc nitrate/urea precursor system. The size and morphology of these ZnO materials can be influenced by subtle changes in precursor concentration, solvent system, and reaction temperature. Optimized conditions involve the use of a 1:3 water/ethylene glycol solvent system and 10 min microwave heating at 150 °C in a dedicated single‐mode microwave reactor with internal temperature control. Carefully executed control experiments ensuring identical heating and cooling profiles, stirring rates, and reactor geometries have demonstrated that for these preparations of ZnO microrods no differences between conventional and microwave dielectric heating are observed. The resulting ZnO microrods exhibited the same crystal phase, primary crystallite size, shape, and size distribution regardless of the heating mode. Similar results were obtained for the ultrafast preparation of ZnO nanoparticles with diameters of approximately 20 nm, synthesized by means of a nonaqueous sol–gel process at 200 °C from a Zn(acac)₂ (acac=acetylacetonate) precursor in benzyl alcohol. The specific role of microwave irradiation in enhancing these nanomaterial syntheses can thus be attributed to a purely thermal effect as a result of higher reaction temperatures, more rapid heating, and a better control of process parameters.     

Effect of the annealing temperature on crystalline phase of copper oxide nanoparticle by copper acetate precursor and sol–gel method

A sol–gel route to synthesize copper oxide nanoparticles with an average size of ca. 63 nm from copper acetate precursor and monoethanolamine as the capping agent is reported. Structural characterization showed the formation of a cubic phase for CuO. The effect of annealing temperature on formation of crystalline phases was investigated. Characterization of the products was performed using thermo-gravimetric analysis, X-ray diffraction, field emission scanning electron microscopy, and diffuse reflectance. The results showed that there are significant differences in the morphological, crystallographic, structural, and optical properties of the nanostructures prepared at different annealing temperatures. The optical properties and band gap of CuO nanoparticles were studied by UV–Vis spectroscopy. According to the results of the optical measurements, the band gap is estimated to be 1.41 eV. These results showed that the band gap energy changed with increase of annealing temperature, which can be attributed to the change in grain size of the samples.     

Synthesis and Catalytic Evaluation of Silver Nanoparticles Synthesized with <Emphasis Type="Italic">Aloysia triphylla</Emphasis> Leaf Extract

In this investigation, we report the biosynthesis of the silver nanoparticles using Aloysia triphylla leaves extract. The as-prepared silver nanoparticles were characterized by ultraviolet–visible (Uv–vis) spectroscopy, X-ray diffractometry, scanning electron microscopy and transmission electron microscopy The infrared spectroscopy (FTIR) and Raman spectroscopy techniques were also used to evaluate the chemical groups of the plant extract involved in the silver ions bioreduction. The results indicate that as the plant extract/precursor salt ratio increases, the size of the nanoparticles decreases. Also, as the reaction temperature increases, the reduction rate increased too, resulting in the formation of smaller nanoparticles-size ranges. Uv–vis spectroscopy illustrates absorption peaks in the range of wavelengths of 430–445 nm corresponding to surface plasmon resonance band of silver nanoparticles. The X-ray diffraction (XRD) confirmed the presence of silver solids with fcc structure type. The FTIR analysis showed that the bands corresponding to phenolic compounds and the amide group were involved in the synthesis and stabilization of silver nanoparticles, respectively. The Raman studies showed bands at 1380 and 1610 cm^?1, which correspond to the aromatic and amide compounds, confirming the FTIR results. The Uv–vis results indicate the capacity of silver nanoparticles to reduce the methylene blue.     

Formation of Metal Selenide and Metal–Selenium Nanoparticles using Distinct Reactivity between Selenium and Noble Metals

Small Se nanoparticles with a diameter of ≈20 nm were generated by the reduction of selenium chloride with NaBH₄ at ?10 °C. The reaction with Ag at 60 °C yielded stable Ag₂Se nanoparticles, which subsequently were transformed into M–Se nanoparticles (M=Cd, Zn, Pb) through cation exchange reactions with corresponding ions. The reaction with Pt formed Pt layers that were evenly coated on the surface of the Se nanoparticles, and the dissolution of the Se cores with hydrazine generated uniform Pt hollow nanoparticles. The reaction with Au generated tiny Au clusters on the Se surface, and eventually formed acorn‐shaped Au–Se nanoparticles through heat treatment. These results indicate that small Se nanoparticles with diameters of ≈20 nm can be used as a versatile platform for the synthesis of metal selenide and metal–selenium hybrid nanoparticles with complex structures.