Copper-catalyzed direct N-arylation of N-arylsulfonamides using diaryliodonium salts in water

An efficient copper-catalyzed N-arylation of N-arylsulfonamides with diaryliodonium salts is reported. The reaction employs diaryliodonium salts and N-arylsulfonamides in water at room temperature, giving the products in moderate to excellent yields.     

An efficient Fe(III)-catalyzed 1,6-conjugate addition of para-quinone methides with fluorinated silyl enol ethers toward β,β-diaryl α-fluorinated ketones

Reported here is a highly efficient 1,6-conjugate addition of fluorinated silyl enol ethers to para-quinone methides, allowing facile access to a range of β,β-diaryl α-fluorinated ketones with good to high yields. Fe(OTf)₃ was identified as the optimal catalyst, with the loading of 3?mol%. Notably, this represent the first 1,6-conjugate addition with fluorinated silyl enol ethers. The synthetic potential of the resulting adducts is also demonstrated.     

Laser-induced fluorescence in N2 and N+2 by multiple-photon excitation at 266 nm

The fluorescence transitions corresponding to the second positive system of N₂ (C³Π_u → B³Π_g) for Δv = 0, 1 and the first negative system of N⁺₂(B²Σ⁺_u → X²Σ⁺_g) for Δv = 0, 1, 2 have been observed following laser-induced mul excitation of N₂.     

Method to build 2,4-substituted selenazole from β-azido diselenide and carboxylic acid: A formal synthesis of selenazofurin

A novel approach for the synthesis of 2,4-disubstituted selenazoles using carboxylic acids (or anhydrides) and β-azido diselenide was achieved via a one-pot cascade formation of selenazoline (Staudinger reduction/diselenide cleavage/selenocarbonylation/aza-Wittig reaction) and a following MnO₂-promoted oxidation. This method offers excellent substrate flexibility, and its valuable application is exemplified by an efficient total synthesis of Selenazofurin which exhibited good antitumor activities against K562 and A549?cells.     

An Efficient Method for the Synthesis of N-Acylsulfonamides: One-pot Sulfonylation and Acylation of Primary Arylamines under Solvent-Free Conditions

Summary. The preparation of N-acylsulfonamides is described using primary amines, arylsulfonyl chlorides and acyl chlorides. Reaction of primary aryl amines with arylsulfonyl chlorides in the presence of NaHCO₃ produced N-arylsulfonamides, which reacted in situ with benzoyl chloride furnishing the corresponding N-benzoyl-N-arylsulfonamides in 72–96% yields. Accordingly, 4-nitrobenzoyl chloride and 3,5-dinitrobenzoyl chloride were used as acylating agents. All the reactions were carried out under solvent-free conditions at room temperature and the products were isolated after simple work-up in high yields and purity.     

A visible-light-promoted cross-dehydrogenative-coupling reaction of N-arylglycine esters with imidazo[1,2-a]pyridines

A mild and convenient visible-light-promoted cross-dehydrogenative-coupling reaction between N-arylglycine esters and imidazo[1,2-a]pyridines for the construction of CC bond was developed. A range of N-arylglycine esters and imidazo[1,2-a]pyridines were able to undergo the CDC reaction readily to afford α-heteroaryl substituted α-amino acid derivatives in good to excellent yields. A tentative mechanism for the photoredox reaction was also proposed. Importantly, the use of copper(II) salt as the sole catalyst in this visible-light-promoted transformation makes this reaction sustainable and practical.     

Substrate engineering: Effects of different N-protecting groups in the CAL-B-catalysed asymmetric O-acylation of 1-hydroxymethyl-tetrahydro-β-carbolines

In the frame of substrate engineering, the steric effect of different N-protecting groups on the enantioselectivity and reaction rate of CAL-B-catalysed (S)-selective O-acylation of N-protected 1-hydroxymethyl-tetrahydro-β-carbolines was investigated. Excellent enantioselectivities (E?>?200) were observed when the acylation of N-Boc [(±)-1], N-Cbz [(±)-3], and N-Fmoc-protected [(±)-4] substrates was performed with the use of CAL-B and acetic anhydride in toluene at 60?°C. The resolution of N-acetyl-protected substrate (±)-2 showed excellent E (>200) after 30?min, but as the reaction progressed, E started decreasing after 2 days, because of N→O and O→N acyl migrations. Preparative resolutions of (±)-3 and (±)-4 resulted in unreacted amino alcohols (R)-3 and (R)-4 and esters (S)-7a and (S)-8a with good enantiomeric excesses (≥88%) and high yields (≥44%).     

Three new dibromopyrrole alkaloids from the South China Sea sponge Agelas nemoechinata

Three new dibromopyrrole alkaloids, 9-N-methylcylindradine A (1), 1-N-methylugibohlin (2), nemoechine H (3), together with one known dibromopyrrole alkaloid N-methyldibromoisophakellin (4) were isolated from the South China Sea sponge Agelas nemoechinata. Their structures were elucidated by comprehensive spectroscopic methods including HRESIMS and NMR, and the absolute configuration of compound 1 was further confirmed by comparison of optical rotation. Compound 3 exhibited moderate cytotoxic activity against K562 and L-02 with IC₅₀ values of 6.1 μM and 12.3 μM, respectively.     

Rhodium(III)-catalyzed direct C-7 sulfonamidation and amination of indolines with arylsulfonamides and trifluoroacetamide

A rhodium-catalyzed direct C–H sulfonamidation and amidation of C-7 position of indolines by simple and commercially available arylsulfonamides and trifluoroacetamide has been developed, affording a series of N-arylsulfonamides and N-aryltrifluoroacetamides in moderate to excellent yields, respectively. Notably, this catalytic system is highly convenient on mmol scale.     

Efficient activation of peroxymonosulfate by hollow cobalt hydroxide for degradation of ibuprofen and theoretical study

Hollow microsphere structure cobalt hydroxide (h-Co(OH)₂) was synthesized via an optimized solvothermal-hydrothermal process and applied to activate peroxymonosulfate (PMS) for degradation of a typical pharmaceutically active compound, ibuprofen (IBP). The material characterizations confirmed the presence of the microscale hollow spheres with thin nanosheets shell in h-Co(OH)₂, and the crystalline phase was assigned to α-Co(OH)₂. h-Co(OH)₂ could efficiently activate PMS for radicals production, and 98.6% of IBP was degraded at 10 min. The activation of PMS by h-Co(OH)₂ was a pH-independent process, and pH 7 was the optimum condition for the activation-degradation system. Scavenger quenching test indicated that the sulfate radical (SO₄^{? ?}) was the primary reactive oxygen species for IBP degradation, which contributed to 75.7%. Fukui index (f ^?) based on density functional theory (DFT) calculation predicted the active sites of IBP molecule for SO₄^{? ?} attack, and then IBP degradation pathway was proposed by means of intermediates identification and theoretical calculation. The developed hollow Co(OH)₂ used to efficiently activate PMS is promising and innovative alternative for organic contaminants removal from water and wastewater.     

1,4-Aryl migration under copper(I) atom transfer conditions

Reaction of N-alkyl-N-(trichloroacetyl)arylsulfonamides with CuCl/amines leads to N-alkyl-N-(dichloroacetyl)-arylsulfonamides via reduction or N-alkyl-aryldichloroacetamides via 1,4-aryl migration with loss of SO₂. The ratio of reduction to aryl migration is dependent upon the temperature and the ligand utilised. Along with amide bond hydrolysis these reactions may compete when carrying out slow atom transfer radical cyclisation reactions using sulfonamides.     

Palladium-catalyzed annulation of 2-(aryldiazenyl) aniline with dimethyl sulfoxide to access N-aryl-1H-benzo[d]imidazol-1-amine

A palladium-catalyzed annulation of 2-(aryldiazenyl) aniline and dimethyl sulfoxide was developed to access N-aryl-1H-benzo[d]imidazol-1-amine in moderate to good yields. Activated by 1,4-diazabicyclo[2.2.2]octane bis(sulfur dioxide) adduct (DABSO), DMSO served as a “CH” fragment during this procedure. It represents a facile pathway leading to benzimidazoles.     

Design and synthesis of fused cyclic sulfamides-oxazolidinones

An efficient protocol for the synthesis of a new series of oxazolidin-2-ones containing sulfamide moieties is described. The synthesis was achieved in two reaction steps. The first was carried out under anhydrous conditions at 0?°C through a selective addition of an alcohol and primary amines to chlorosulfonylisocyanate to produce N-carboxylsulfamides in good yields. Under appropriate conditions of solvent, base and temperature, these intermediates underwent subsequent intramolecular cyclizations, giving exclusively the corresponding sulfamoyloxazolidinones.     

Iodine-mediated one-pot synthesis of C-3 acylated indolizines from pyridines,aryl methyl ketones and acrylate derivatives

An I₂/CuI-promoted multi-component reaction from pyridines, aryl methyl ketones and electron deficient acrylates has been accomplished in a “one-pot” manner, which provides a straightforward and efficient access to C-3 acylated indolizines. The key intermediate of N-ylides is hypothesized to be generated in situ from pyridines and (hetero)aryl methyl ketones in the presence of iodine. This method has been applied in the synthesis of two molecules with anticonvulsant and anti-inflammatory activities.     

An electron-diffraction study of the molecular structure of gaseous perbromyl fluoride and calculation of its force field and vibrational amplitudes

The molecular structure of FBrO₃ has been studied by gas-phase electron diffraction. Least-squares refinements of the molecular geometry using fixed spectroscopic amplitudes revealed two geometrical minima. Initially, the amplitudes employed were derived from diagonal force fields obtained by spectroscopic least-squares refinements to fit observed and calculated wave numbers; for each geometry there are two spectroscopic minima. In the lowest geometrical minimum the wave number agreement is poor, however, the introduction of the ∠OBrO/∠FBrO interaction force constant removed the discrepancies; the resulting force field is F(Br-O) = 6.92 ± 0.02 mdyn Å^?1F(Br-F) = 3.22 ± 0.03 mdyn Å^?1, F(∠OBrO) = 1.06 ± 0.02 mdyn Å, F(∠FBrO) = 0.81 ± 0.03 mdyn Å, F(∠OBrO/∠FBrO) = ?0.19 ± 0.02 mdyn Å. In the corresponding geometrical minimum r_g(Br-O) = 1.582 ± 0.001 Å, r_g(Br-F) = 1.708 ± 0.003 Å, r_α(∠OBrO) = 114.9 ± 0.3°, r_α(∠FBrO) = 103.3 ± 0.3°. Perpendicular amplitude correction coefficients, calculated for each force field employed, were used throughout to relate the interatomic distances through the r_α-structure. The geometries of the r_α^o- and r_e-structures are estimated.     

Production of the n2 herman infrared system by the energy pooling reaction of N2(Δ3Σ+u) metastable nitrogen molecules

Molecular N₂ emission, observed from an Ar(³Po, 2) and Xe(³P₂) + N₂ flowing afterglow apparatus, indicates that the energy pooling reaction by 2N₂(A ³Σ⁺_u) generates the emission from the Herman infrared system, which is an unassigned nitrogen band system. A lower limit to the formation rate constant for the upper state of the Herman infrared system was found to be 2.5 × 10^-11 cm³ molecule^?1 s^?1. The information presented here may help in the identification of the upper and lower states of the emission system. The 2N₂(A) energy pooling reaction also forms N₂(B³ Π_g, v? 8) but a rate constant cannot be assigned from the present data.     

An eco-friendly tandem tosylation/Ferrier N-glycosylation of amines catalyzed by Er(OTf)3 in 2-MeTHF

Er(OTf)₃ in 2-MeTHF provides a new and eco-friendly process for Ferrier glycosylation of sulfonamides and amino acids with various N-nucleophiles.The stereoselective synthesis of 2,3-unsaturated-N-pseudoglycals was carried out with 3,4,6-tri-O-acetyl-d-glucal and different nucleophiles affording good results in a short time.     

Gold-catalyzed cyclization of enediynes and arenediynes to 6H-benzo[c]chromen-6-one and dibenzo[c,h]chromen-6-one derivatives

The efficient synthesis of 6H-benzo[c]chromen-6-one and dibenzo[c,h]chromen-6-one derivatives is described. Thus, treatment of arenediynes 1 and enediynes 5 with 5?mol % Ph₃PAuCl and 10?mol % of AgSbF₆ in refluxing toluene gave dibenzo[c,h]chromen-6-ones 4 and 6H-benzo[c]chromen-6-ones 6, in good yields, respectively.     

Transition metal-mediated or catalyzed hydrocarboxylation of olefins with CO2

The development of new methods to incorporate carbon dioxide into organic molecules is of special significance and interest as it is an abundantly available and recyclable C1 source. Catalytic hydrocarboxylation of readily available olefins with CO₂ represents a highly atom- and step-economic approach toward transformations of CO₂ into widely-used aliphatic acids. However, due to relatively lower reactivity of them, this goal has been always a formidable challenge. Herein we review relevant progress on transition metal-mediated or catalyzed methodologies toward the desired hydrocarboxylation, with an emphasis on the development of two main pathways, including transition-metal-catalyzed cyclometallation of olefin and CO₂ and direct addition of alkylmetal to CO₂.     

A kinetic study of the ortho-mercuration of 2-methylazobenzene

The kinetics of the mercuration of 2-methylazobenzene in methanol were studied. The thermodynamic data found were ?E_act = 22.7 kcal mol^?1, ?H¹ = 22.0 kcal mol^?1, and ?S¹ = ?12.3 eu. In comparison with a value of ?S¹ ? ?20 eu for the mercuration of benzene, this lowered entropy is taken as evidence for complex formation between mercuric acetate and 2-methylazobenzene before and during the rate determining step of electrophilic substitution.