Polymerization of n-Hexyl Isocyanate Initiated by Novel Rare Earth Tris （2,6-di-tert-butyl-4-methylphenolate）

The polymerization of n-hexyl isocyanate (HNCO) was carried out in the presence of a novel single initiator, rare earth tris (2,6-di-tert-butyl-4-methylphenolate) [Ln(OAr)3]. The influences of reaction conditions such as the monomer concentration, the polymerization temperature and time, and the types of solvents on the polymerization of HNCO were studied. Polymerizations of phenyl, i-propyl, p-tolyl, n-butyl and n-octyl isocyanates with La(OAr)3 were also examined.     

RING-OPENING POLYMERIZATION OF 1,4-DIOXAN-2-ONE INITIATED BY LANTHANUM TRIS（ 2,6-DI-TERT-BUTYL-4-METHYLPHENOLATE）

The ring-opening polymerization of 1,4-dioxan-2-one （PDO） was carried out by lanthanum tris（2,6-di-tert-butyl-4- methylphenolate） （La（OAr）3） as novel single component initiaLor. The influences of polymerization reaction temperature and the molar ratio of monomer to initiator on the monomer conversion and molecular weight of poly（1,4-dioxan-2-one） （PPDO） were explored. PPDO with high viscosity average molecular weight of 1.95×10^5 can be prepared at 40℃ when [PDO]/ [La（OAr）3] molar ratio was 800. Mechanism investigation shows that the polymerization proceeds through a ＂coordination- insertion＂ mechanism with selective rupture of acyl-oxygen be,nd of PDO.     

SINGLE LANTHANUM TRIS(N-PHENYLETHYL-3,5-DI-t-BUTYLSALICYLALDIMINATO)S INITIATOR FOR RING-OPENING POLYMERIZATION OF 1,4-DIOXAN-2-ONE IN BULK

A rare earth Schiff base complex:lanthanum tris(N-phenylethyl-3,5-di-t-butylsalicylaldiminato)s [La(OPEBS)_3] was successfully applied as single component initiator for the ring-opening polymerization of 1,4-dioxan-2-one (PDO) in bulk.The influence of reaction conditions,such as polymerization temperature,the molar ratio of the monomer to initiator (M/I) on the monomer conversion and molecular weight of the polymer has been investigated.Poly(1,4-dioxan-2-one) with a viscosity-average molecular weight (My...     

新颖的镧-2-氟苯甲酸及2,2′-联吡啶配合物的合成与晶体结构(英文)

2-fluorobenzoic acid (2-HFBA) and 2,2′-bipyridine (2,2′-bpy) was used as ligands to react with lanthanum to obtain a complex, [La(2-FBA)3·(2,2′-bpy)]2. The structure of the complex contains three independent molecules. In two of them, the two central metal ions are connected together through four 2-FBA groups by bidentate bridging and chelating-bridging two modes. In another, the two central metal ions are connected together through four bidentate bridging 2-FBA groups.     

Photoluminescence and Electroluminescence Properties of 2, 5-Bis[2,2′-bis （5-phenyl ）- 1, 3,4-oxadiazole] Thiophene （T-OXD） and T-OXD／Poly（9-vinylcarbazole） Blends

The photoluminescence(PL) and the electroluminescence(EL) properties of a novel organic compound, 2,5-bis (2,2‘-bis(5-phenyl)-1, 3,4-oxadiazole (T-OXD), were studied in chloroform and in a solid thin film. The PL and the EL properties of T-OXD/poly(9-vinylcarbazole)(PVK) blends were also studied, which contained various contents of T-OXD. The PL maximum emission peaks of T-OXD/PVK blends show gradual bathochromtic-shift with the increase of the T-OXD content. The EL spectra of T-OXD/PVK devices are similar to their PL spectra, and all the EL maximum emission peaks show bathochromtic-shift compared with the corresponding PL spectra, which is ascribed to the formation of electroplex. The turn-on voltages for ITO/T-OXD; PVK/AI devices decreased from 13.5 V of the device cotaining 0. 1% T-OXD(mass fraction) to 5 V of the device containing 5% T-OXD, which suggests that T-OXD improves the energy level match between T-OXD and PVK and enhances the emission efficiency. The experimental results indicate that T-OXD can be used as a good electron transporting material.     

RING-OPENING POLYMERIZATION OF l,4-DIOXAN-2-ONE INITIATED BY LANTHANUM TRIS(2,6-DI-TERT-BUTYL-4-METHYLPHENOLATE)

The ring-opening polymerization of 1,4-dioxan-2-one (PDO) was carried out by lanthanum tris(2,6-di-tert-butyl-4-methylphenolate) (La(OAr)3) as novel single component initiator. The influences of polymerization reaction temperature and the molar ratio of monomer to initiator on the monomer conversion and molecular weight of poly(1,4-dioxan-2-one) (PPDO) were explored. PPDO with high viscosity average molecular weight of 1.95×105 can be prepared at 40℃when [PDO]/ [La(OAr)3] molar ratio was 800. Mechanism investigation shows that the polymerization proceeds through a "coordinationinsertion" mechanism with selective rupture of acyl-oxygen bond of PDO.     

新颖的镧-2-氟苯甲酸及2，2′-联吡啶配合物的合成与晶体结构

2-fluorobenzoic acid (2-HFBA) and 2,2′-bipyridine (2,2′-bpy) was used as ligands to react with lanthanum to obtain a complex, [La(2-FBA)₃·(2,2′-bpy)]₂. The structure of the complex contains three independent molecules. In two of them, the two central metal ions are connected together through four 2-FBA groups by bidentate bridging and chelating-bridging two modes. In another, the two central metal ions are connected together through four bidentate bridging 2-FBA groups. CCDC: 237658.     

Synthesis and Structure of a Novel Copper（Ⅱ） Dinuclear Complex with 4,4′-Dipyridyl as the Bridge

With N,N′-bis(benzimidazol-2-methyl)amine as the ligand,a novel Cu(Ⅱ) dinuclear complex was synthesized as a mimetic compound of superoxide dismutase(SOD).The complex was characterized with element analysis,UV and IR spectra.The crystal structure was determined by using X-ray diffraction analysis.the crystal structure shows that Cu(Ⅱ) and its coordinated atoms construct distorted octahedron configuration with oxygen atome of (ClO4-)s in the axial directions.The coordinated cations are linked by (ClO4-)s to form nonplanar sheets.All sheets are linked together into three-dimensional network by the intermolecular hydrogen bonds.The result of the activity assay indicates that the complex does have certain biological activity.     

SYNTHESIS AND CHARACTERIZATION OF ORGANO-SOLUBLE FLUORINATED POLYIMIDES FROM 4,4′-BIS(3-AMINO-5-TRIFLUOROMETHYLPHENOXY)-BIPHENYL AND VARIOUS AROMATIC DIANHYDRIDES

An aromatic diamine monomer, 4,4′-bis(3-amino-5-trifluoromethyl phenoxy)-biphenyl (TFBPDA), was synthesized via the nucleophilic displacement reaction of 3,5-dinitrobenzotrifluoride and 4,4′-biphenol. The monomer was reacted with various aromatic dianhydrides via the high temperature polycondensation procedure to provide a series of polyimides. The polyimides, PI-1 to PI-4, show good solubility not only in aprotic solvents, such as N-methyl-2-pyrrolidinone and N,N-dimethylacetamide, but also in many common solvents, such as m-cresol, chloroform and cyclopentanone. PI-4, derived from 4,4′-(hexafluoroisopropylidene)diphthalic anhydride and TFBPDA, was even soluble in toluene. Moreover, PI films exhibit good thermal stability, outstanding transparency in the visible light region and acceptable mechanical and electrical properties. The excellent combined properties of the polyimides make them as a good candidate for fabricating microelectronics.     

Ring-opening Polymerization of 6-Caprolactone by Lanthanide Tris（ 2,6- dimethylphenolate ） s

Lanthanide tris ( 2,6-dimethylphenolate ) s [ Ln ( ODMP)3 ] were used as iniliators for ring-opening polymerization of e-caprolac-tone (CL) for the first time. The influence of different rare earth elements and solvents was investigated. ^1H NMR spectral data of polycaprolactone (PCL) obtained showed that the poly-merization mechanism is in agreement with the coordination-in-sertion mechanism and the selective cleavage of the acyl-oxygen bond of CL.     

Green exciplex emission from a bilayer light-emitting diode containing a rare earth ternary complex

A bilayer organic light-emitting diode using a blue-fluorescent yttrium complex, tris(1-phenyl-3-methyl-4-isobutyryl-5-pyrazolone)-(2,2^′-dipyridyl) yttrium [Y(PMIP)₃(Bipy)] (YPB) as an emitting material and poly(N-vinylcarbazole) (PVK) as a hole-transporting material emitted bright green light instead of blue light. It was attributed to the exciplex formation at the solid interface between the PVK and YPB layers, which was demonstrated by the measurement of the absorption, photoluminescence (PL) and photoluminescence excitation (PLE) spectra of the mixture of PVK and YPB (molar ratio 1:1). The device exhibited a maximum luminance of 177 cd/m² and a peak power efficiency of 0.02 lm/W.     

Synthesis, characterization and thermal investigation of M[M(C2O4)3]·xH2O (x=4 for M=Cr(III); x=2 for M=Sb(III) and x=9 for M=La(III))

The complexes, M[M(C₂O₄)₃]·xH₂ O, where x=4 for M=Cr(III), x=2 for M=Sb(III) and x=9 for M=La(III) have been synthesized and their thermal stability was investigated. The complexes were characterized by elemental analysis, IR and electronic spectral data, conductivity measurement and powder X-ray diffraction (XRD) studies. The chromium(III)tris(oxalato)chromate(III)tetrahydrate (COT), Cr[Cr(C₂ O₄)₃]·4H₂O, released water in a stepwise fashion. Removal of the last trace of water was accompanied by a partial decomposition of the oxalate group. Thermal investigation using TG, DTG and DTA techniques in air produced Cr₂O₃ at 858°C through the intermediate formation of Cr₂O₃ and CrC₂O₄ at around 460°C. While DSC study in nitrogen up to 670°C produced a mixture of Cr₂O₃ and CrC₂O₄. In antimony(III)tris(oxalato)antimonate(III)dihydrate (AOD), Sb[Sb(C₂O₄)₃]·3H₂O the dehydration took place during the decomposition of precursor at 170–290°C and finally at ca. 610°C Sb₂ O₅ along with trace amounts of Sb₂O₄ were produced. Trace amount of Sb₂O₃ and Sb along with Sb₂O is proposed as the end product at 670°C of AOD in nitrogen. The oxide La₂O₃ is formed at 838°C from the study with TG, DTG and DTA in air of lanthanum(III)tris(oxalato)lanthanum(III)nonahydrate (LON), La[La(C₂O₄)₃]·9H₂O. Intermediate dioxycarbonate, La₂O₂CO₃ was generated at 526°C prior to its decomposition to lanthanum oxide in air; whereas in N₂ the formation of La₂(CO₃)₃ at 651°C was proposed. The thermal parameters have been evaluated for each step of the dehydration and decomposition of COT, AOD and LON using five non-mechanistic equations i.e. Flynn and Wall, Freeman and Carroll, Modified Freeman and Carroll, Coats–Redfern and MacCallum–Tanner equations. Kinetic parameters, such as, E^*, k_o, ΔH^*, ΔS^* etc. were also supplemented by DSC studies in nitrogen for all the three complexes. Some of the intermediate species have been identified by analytical and powder XRD studies. Tentative schemes has been proposed for the decomposition of all three compounds in air and nitrogen.     

d(GGTATACC)2与乙二胺四乙酸在溶液中的相互作用

空气的尘埃中含有一种核苷酸降解酶,这种酶很容易被溶液中痕量的Mg2+等金属离子激活,从而使溶液中的DNA或RNA解链或失活.因而用NMR方法研究核酸的溶液结构时,需要在磷酸缓冲溶液中加入乙二胺四乙酸(EDTA)或其钠盐,保持其浓度大于0.1mmol/L[1～3],利用EDTA与包括Mg2+在内的众多金属离子的强络合作用,解除Mg2+等金属离子对核苷酸降解酶的激活功能,达到保护核酸活性的目的.     

A Novel Layered Complex with Rhomboidal Channels： Hydrothermal Synthesis, Crystal Structure, and Properties of Cu （4,4′-bipy）2（H2PO4）2（H2O）2（bipy=bipyridine）

The combination of both 4,4′-bipyridine(4,4′-bipy) and dihydrogen phosphate anion ligands with copper(Ⅱ) results in the formation of a novel layered compound Cu(4,4′-bipy)₂(H₂PO₄)₂(H₂O)₂. The crystal structure comprises discrete neutral Cu(4,4′-bipy)₂(H₂PO₄)₂(H₂O)₂ units. The copper atom, located on the crystallographic twofold axis, is coordinated with two nitrogen atoms of terminal 4,4′-bipy ligands and two water molecules at the equatorial positions, and two dihydrogen phosphate oxygen atoms at the axial positions, forming an elongated octahedron. The complex is a two-dimensional distorted rhomboidal network possessing two kinds of rhomboids with dimensions of ca. 1.6792 nm×0.3203 nm and 1.2778 nm×0.3198 nm, respectively. The two-dimensional networks are stacked parallelly on each other along c-axis to give an extended three-dimensional channel network with an interlayer distance of ca. 0.5030 nm. Crystal data: triclinic, space group P1, a=1.0253(2) nm, b=1.4501(3) nm, c=0.79715(16) nm, α=97.91(3)°, β=90.99(3)°, γ=85.54(3)°, V=1.1703(4) nm³, Z=2, R=0.0892, wR=0.2451.     

La-NMR-spektroskopie an allyllanthan(III)-komplexen

¹³⁹La-NMR chemical shifts were measured for several anionic complexes of formulae Li(C₄H₈O₂)_3/2 [La(ν³-C₃H₅)₄], [Li(C₄H₈O₂)₂][Cp′_nLa(ν³-C₃]H₅)_4−n] (Cp′ = Cp(ν⁵-C₅H₅); n = 1, 2 and Cp′ = Cp * (ν⁵-C₅Me₅); N = 1) and Li[R_nLa(ν³-C₃H₄)₄−n] (R = N(SiMe₃)₂; n = 1, 2 and R = CCsIMe₃; n = 4), as well as for neutral compounds for formulae La(ν³-C₃H₅)₃L_n (L = (C₄H₈O₂)_1.5, (HMPT)₂, TMED), Cp′_nLa(ν³-C₃H₅)_3−n (Cp′= Cp(ν⁵-Cp₅H₅), Cp *(ν⁵-C₅Me₅); n = 1, 2) and La(ν³-C₃H₂)₂X(THF)₂ X = Cl, Br, I). Typical ranges of the ¹³⁹La-NMR chemical shifts were found for the different types of complex independent of number and kind of organyl groups directly bonded to lanthanum.

Zusammenfassung

¹³⁹La-NMR-Spektroskopie wurde an einer Reihe anionischer Allyllanthanat(III)-Komplexe der Zusammensetzung ]- [La)ν³-C₃H₅)₄, [Li(C₄H₈)₂][Cp′_nLa(ν³-C₃H₅)_4−n(Cp′ = Cp(ν⁵-C₅H₅); n = 1, 2 und Cp′ = Cp * (ν⁵-C₅Me₅); N = 1) und Li[R_nLa(ν³-C₃H₅)_4−n (R = B(SiMe₃)₂; n = 1, 2 und R = CCSiMe₃; n = 4 sowie neutraler Allyllanthan(III)-Komplexe der Zusammensetzung La(ν³-C₃H₅)₃L_n (L_n = (C₄H₈O₂)_1.5, (HMPT)₂, TMED), Cp′_n, La(ν³-C₃H₅)_3−n (Cp′ = Cp(ν⁵-C₅H₅), Cp * (ν⁵- Cp₅Me₅); n = 1, 2) und La(ν³-Cp₃H₅)₂X(THF)₂ (X = Cl, Br, I) durchgefürt. In Abhängikeit von der Anzahl und der Art der am Lanthan gebundenen Gruppen wurden für die verschieden Komplextypen charakteristische Resonanzbereiche ermittelt.     

Complexation of lanthanum(III) nitrate by N,N′,N,N′-tetraethylmalonamide: Crystal structure of three polymorphic forms

A monoclinic form of the complex between lanthanum(III) nitrate and tetraethylmalonamide (TEMA), La(NO₃)₃(TEMA)₂, 1, differing from the triclinic form 2 previously reported, is described. 1 undergoes an evolution with time which leads to the form 2, which in its turn undergoes a temperature-driven phase transition previously unreported, leading to the formation of 3.     

SPECTROPHOTOMETRIC STUDY OF BIMETALLIC TERNARY COMPLEX OF LANTHANUM——COPPER WITH ALIZARIN FLUORINE BLUE

The bimetallic ternary complex formation in the aqueous solution of La and Cu with alizarin fluorine blue (AFB) was studied by spectrophotometry.The ternary complex LaCu3(AFB)3 has maximum light absorption at 550nm.The colour reaction selectivity is fairly good and the method can be applied to the direct photometric determination of copper in lanthanum or some pure metals.A new mathematical approach to the treatment of spectrophotometric data for differentiation between mononuclear and polynuclear in solution is presented.The improvable fixed logarithm method is for complexes of the type MmBn(m=n) or MmBn(m=n).We report that La(Ⅲ) combines with AFB at pH 4.5 to form a single complex,withm=n=2,La2(AFB)2.     

Radiation chemical formation and precipitation of Turnbull blue from Fe(III)-oxalate

The radiation chemical analogue of the light induced formation of Turnbull blue, K[Fe(II)Fe(III)(CN)₆], from K₃[Fe(III)(oxalate)₃] and K₃[Fe(III)(CN)₆] was investigated by pulse radiolysis. The kinetic analysis revealed a two-step process: after a pseudo-first order reaction an autocatalytic formation of Turnbull blue takes place. The rate coefficient of the first step is k₈=1.42×10⁵ M⁻¹ s⁻¹. The incubation time of precipitation was also determined.     

Synthesis and characterization of sodium bis(trimethylstannyl) amide and bis(trimethylsilyl) bis(trimethylstannyl) -phospha-tetrazene

Sodium bis(trimethylstannyl)amide NaN(SnMe₃)₂, isolated by the reaction of trimethylstannyldiethylamine with sodium amide, reacts with tris(trimethylsilyl)hydrazino—dichloro-phosphine to form bis(trimethylsilyl)bis(trimethylstannyl)-2-phospha-2-tetrazene, (Me₃Si)₂N-N=P-N(SnMe₃)₂. Both the molecules have been isolated and characterized.     

TD-DFT Studies on Electronic and Spectral Properties of Platinum(II) Complexes with Phenol and Pyridine Groups

The molecular structures of the ground and the lowest triplet states for a series of Pt(II) complexes PtLCl(1)[L=6-(2-hydroxyphenyl)-2,2′-bipyridine], Pt(pp)₂[pp=2-(2-hydroxyphenyl)pyridine](2), PtbpyCl₂(bpy=2,2′- bipyridine)(3), and the free tridentate L ligand(4) were optimized by the density functional theory B3LYP and UB3LYP methods, respectively. On the basis of optimized geometries, the spectral properties were investigated with time-dependent density functional theory(TD-DFT). In comparison with those of complexes 2 and 3, the more rigid structure of complex 1 together with its low rate of the radiationless decay via nonemissive d-d state leads to higher photoluminescence quantum efficiency. And the phosphorescence quantum efficiency of complex 1 can be easily controlled by modifying auxiliary ligands. The introduction of fluorine ligand into complexes can effectively increase the radiation transition rate and decrease the radiationless d-d transition rate, and as a result, a novel complex PtLF(5) might be a good phosphorescent material suitable for organic electronic devices.