Acetamidine complexes as catalysts for ethylene polymerization

The reaction of (2,6-diisopropyl-phenyl)-acetimidoyl chloride or (2,6-dimethyl-phenyl)-acetimidoyl chloride with 2,6-dimethylaniline in the presence of triethylamine yields a mixture of isomers N′-(2,6-diisopropyl-phenyl)-N-[1-(2,6-diisopropyl-phenylimino)-ethyl]-N-(2,6-dimethyl)-acetamidine (1a) and N-(2,6-diisopropyl-phenyl)-N-[1-(2,6-diisopropyl-phenylimino)-ethyl]-N′-(2,6-dimethyl)-acetamidine (1b), and N,N′-bis-(2,6-dimethyl-phenyl)-N-[1-(2,6-dimethyl-phenylimino)ethyl)]-acetamidine (2), respectively. The addition of isomers (1a + 1b) to nickel (II) dibromide 2-methoxyethyl ether, (NiBr₂[O(C₂H₄OMe)₂]) gives a mixture of new nickel complexes, [NiBr₂{N′-(2,6-diisopropyl-phenyl)-N-[1-(2,6-diisopropyl-phenylimino)-ethyl]-N-(2,6-dimethyl)-acetamidine}] (3a) and [NiBr₂{N-(2,6-diisopropyl-phenyl)-N-[1-(2,6-diisopropyl-phenylimino)-ethyl]-N′-(2,6-dimethyl)-acetamidine}] (3b). Similarly, ligand 2 reacts with nickel (II) dibromide 2-methoxyethyl ether to afford the complex [NiBr₂{N,N´-bis-(2,6-dimethyl-phenyl)-N-[1-(2,6-dimethyl-phenylimino)ethyl)]-acetamidine}] (4). The structures of the ligands and nickel complexes have been determined by single crystal X-ray diffraction.The addition of MAO to these complexes generates catalytically active species for the homopolymerization of ethylene. The polymer products are high molecular weight (80-169 K). At temperatures of up to 60 °C both catalysts are a single site giving a monomodal molecular weight distribution. However, at 70 °C the mixture (3a + 3b) shows a bimodal molecular weight distribution.     

Mono and bimetallic nickel bromide complexes bearing azolate-imine ligands: Synthesis, structural characterization and ethylene polymerization studies

The synthesis of N-(1-(3,5-dimethylpyrazol-1-yl)ethylidene)-2,6-diisopropylaniline (1) and N-(1-(indazol-2-yl)ethylidene)-2,6-diisopropylaniline (2) allowed access to new transition metal complexes. When reacted with dibromo(2,2′-dimethoxyethylether)nickel(II) the complexes [NiBr₂{N-(1-(3,5-dimethylpyrazol-1-yl)ethylidene)-2,6-diisopropylaniline}] (3) and [Ni₂Br₂(μ-Br)₂{N-(1-(indazol-1-yl)ethylidene)-2,6-diisopropylaniline}₂] (4) are yielded, respectively. The addition of MAO generates catalytically active species for the homopolymerization of ethylene. The polymer products were low molecular weight (3-6 K) and a monomodal molecular weight distribution, consistent with the presence of a single active site. In addition, the catalyst was found to efficiently oligomerize higher olefins to high molecular weights with narrow PDIs.     

Rare earth metal bis(amide) complexes bearing amidinate ancillary ligands: synthesis, characterization, and performance as catalyst precursors for cis-1,4 selective polymerization of isoprene

A family of rare earth metal bis(amide) complexes bearing monoanionic amidinate [RC(N-2,6-Me(2)C(6)H(3))(2)](-) (R = cyclohexyl (Cy), phenyl (Ph)) as ancillary ligands were synthesized and characterized. One-pot salt metathesis reaction of anhydrous LnCl(3) with one equivalent of amidinate lithium [RC(N-2,6-Me(2)C(6)H(3))(2)]Li, following the introduction of two equivalents of NaN(SiMe(3))(2) in THF at room temperature afforded the neutral and unsolvated mono(amidinate) rare earth metal bis(amide) complexes [RC(N-2,6-Me(2)C(6)H(3))(2)]Y[N(SiMe(3))(2)](2) (R = Cy (1); R = Ph (2)), and the "ate" mono(amidinate) rare earth metal bis(amide) complex [CyC(N-2,6-Me(2)C(6)H(3))(2)]Lu[N(SiMe(3))(2)](2)(μ-Cl)Li(THF)(3) (3) in 61-72% isolated yields. These complexes were characterized by elemental analysis, NMR spectroscopy, FT-IR spectroscopy, and X-ray single crystal diffraction. Single crystal structural determination revealed that the central metal in complexes 1 and 2 adopts a distorted tetrahedral geometry, and in complex 3 forms a distorted trigonal bipyramidal geometry. In the presence of AlMe(3), and in combination with one equimolar amount of [Ph(3)C][B(C(6)F(5))(4)], complexes 1 and 2 showed high activity towards isoprene polymerization to give high molecular weight polyisoprene (M(n) > 10(4)) with good cis-1,4 selectivity (>90%).     

Chromium(III) complexes with terdentate 2,6-bis(azolylmethyl)pyridine ligands: Synthesis, structures and ethylene polymerization behavior

Reactions of 2,6-bis(bromomethyl)pyridine with 3,5-dimethylpyrazole and 1H-indazole yield the terdentate ligands 2,6-bis(3,5-dimethylpyrazol-1-ylmethyl)pyridine (5) and 2,6-bis(indazol-2-ylmethyl)pyridine (6). The molecular structure of the new compound 6 was determined by single-crystal X-ray diffraction. These ligands react with the CrCl₃(THF)₃ complex in THF to form neutral complexes of general formula [CrCl₃{2,6-bis(azolylmethyl)pyridine-N,N,N}] (7, 8) which are isolated in high yields as stable green solids and characterized by means of elemental analysis, magnetic moments, IR, and mass spectroscopy. Theoretical calculations predict that the thermodynamically preferred structure of the complexes is the fac configuration. After reaction with methylaluminoxane (MAO) the chromium(III) complexes are active in the polymerization of ethylene.     

Ni(II) and Cu(II) complexes of phenoxy-ketimine ligands: Synthesis,structures and their utility in bulk ring-opening polymerization (ROP) of l-lactide

Synthetic, structural and catalysis studies of Ni(II) and Cu(II) complexes of a series of phenoxy-ketimine ligands with controlled variations of sterics, namely 2-[1-(2,6-diethylphenylimino)ethyl]phenol (1a), 2-[1-(2,6-dimethylphenylimino)ethyl]phenol (1b) and 2-[1-(2-methylphenylimino)ethyl]phenol (1c), are reported. Specifically, the ligands 1a, 1b and 1c were synthesized by the TiCl₄ mediated condensation reactions of the respective anilines with o-hydroxyacetophenone in 21–23% yield. The nickel complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Ni(II) (2a) and {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Ni(II) (2b), were synthesized by the reaction of the respective ligands 1a and 1b with Ni(OAc)₂ · 4H₂O in the presence of NEt₃ as a base in 71–75% yield. The copper complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Cu(II) (3a), {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Cu(II) (3b) and {2-[1-(2-methylphenylimino)ethyl]phenoxy}₂Cu(II) (3c) were synthesized analogously by the reactions of the ligands 1a, 1b and 1c with Cu(OAc)₂ · H₂O in 70–87% yield. The molecular structures of the nickel and copper complexes 2a, 2b, 3a, 3b and 3c have been determined by X-ray diffraction studies. Structural comparisons revealed that the nickel centers in 2a and 2b are in square planar geometries while the geometry around the copper varied from being square planar in 3a and 3c to distorted square planar in 3b. The catalysis studies revealed that while the copper complexes 3a, 3b and 3c efficiently catalyze ring-opening polymerization (ROP) of l-lactide at elevated temperatures under solvent-free melt conditions, producing polylactide polymers of moderate molecular weights with narrow molecular weight distributions, the nickel counterparts 2a and 2b failed to yield the polylactide polymer.     

[2,6-(t-BuOCH2)2C6H3Sn(OH)]2O: A rare example of a monomeric tetraorganodistannoxane stabilized by intramolecular hydrogen bridges

The synthesis and molecular structure of [2,6-(t-BuOCH₂)₂C₆H₃Sn(OH)]₂O (2), the only second example of a monomeric tetraorganodistannoxane, is reported. Compound 2 crystallizes in two polymorphic modifications (2a, monoclinic; 2b, triclinic). The two modifications especially differ in their intramolecular Sn?Odistances which fall in the range between 2.789(3) and 3.194(5) Å. It appears, that both the latter and intramolecular O?H-O bridges (2.882(4)-2.907(6) Å) contribute to the stability of the monomeric structures.     

Rare-earth metal dichloride and bis(alkyl) complexes containing amidinate-amidopyridinate ligands: synthesis,structure, and reactivity

A reaction of anhydrous yttrium chloride with an equimolar amount of lithium amidinateamidopyridinate obtained in situ by metallation of N,N’-bis(2,6-dimethylphenyl)-N-{6-[(2,6-dimethylphenyl)amino]pyridin-2-yl}acetimidamide ((2,6-Me₂C₆H₃)NH(2,6-C₆H₃N)N(2,6-Me₂C₆H₃)C(Me)=N(2,6-Me₂C₆H₃), L¹H) (1) with n-butyllithium in THF at–70 °C was used to synthesize the yttrium dichloride complex (L¹)YCl₂(THF)₂ (2). The lutetium bis(alkyl) complex, namely, N’-(2,6-diisopropylphenyl)-N-(2,6-dimethylphenyl-N-{6-[(2,6-dimethylphenyl)amido]pyridin-2-yl}acetimidoamidinatebis(trimethylsilylmethyl)lutetium (4), was obtained by the reaction of N’-(2,6-diisopropylphenyl)-N-(2,6-dimethylphenyl)-N-(6-((2,6dimethylphenyl)amino)pyridin-2-yl)acetimidamide ((2,6-Me₂C₆H₃)NH(2,6-C₆H₃N)N-(2,6-Me₂C₆H₃)C(Me)=N(2,6-Pr ₂ ⁱ C₆H₃), L²H (3)) with an equimolar amount of Lu(CH₂SiMe₃)₃(THF)₂. Complex 4 was found to be very stable and did not show indications of C—H-activation and other kinds of disintegration in benzene or toluene solution even upon prolonged heating at 60 °C. The reaction of complex 4 with an equimolar amount of 2,6-diisopropylaniline in toluene solution at room temperature led to the formation of the lutetium alkyl-anilide complex (L²)Lu(CH₂SiMe₃)(NH-2,6-Pr ₂ ⁱ C₆H₃) (5). A three-component system 4—AlBu ₃ ⁱ —[X][B(C₆F₅)₄] ([X] = [Ph₃C], [PhNHMe₂], the molar ratio of 1: 10: 1) was found to catalyze polymerization of isoprene.     

Preparation,Structure, Spectral,and Magnetic Properties of Copper(II) Halogenonicotinates: Crystal and Molecular Structure of Tetrakis(μ‐2‐chloronicotinato‐O,O′)‐diaquadicopper(II)

The characterization of the complexes [Cu₂(2‐Clnic)₄(H₂O)₂] ( 1 ), [Cu(2,6‐Cl₂nic)₂(H₂O)₂] ( 2 ) and [Cu(5‐Brnic)₂(H₂O)₂]_n ( 3 ) (where 2‐Clnic = 2‐chloronicotinate, 2,6‐Cl₂nic = 2,6‐dichloronicotinate or 5‐Brnic = 5‐bromonicotinate) was based on elemental analysis, IR, electronic and EPR spectra, and magnetic susceptibility. Complex 1 was also studied by X‐ray analysis at 298 1a and 80 K 1b . The complex 1 contains a dinuclear Cu‐acetate molecular structure in which the carboxyl groups of the 2‐chloronicotinate ligands act as bridges and water molecules are at apical positions. The stereochemistry about Cu atom at both temperatures is typical for square pyramidal geometry with CuO₄O chromophore. The Cu‐Cu distance is 2.6513(8) and 2.6382(6) Å for 1a and 1b , respectively. The Cu atoms are displaced by 0.2069(9) and 0.1973(7) Å, respectively, from the plane containing four oxygen atoms bonded to the Cu atom toward the apical water molecules. Strong and weak hydrogen bonds as well as C–Cl···π interactions in the crystal structure are discussed as well. Both complexes, monomeric [Cu(2,6‐Cl₂nic)₂(H₂O)₂] ( 2 ) and polymeric [Cu(5‐Brnic)₂(H₂O)₂]_n ( 3 ), possess octahedral copper(II) stereochemistry with differing tetragonal distortions.     

Supramolecular self-assembled polynuclear complexes from tritopic, tetratopic, and pentatopic ligands: structural, magnetic and surface studies

Polymetallic, highly organized molecular architectures can be created by "bottom-up" self-assembly methods using ligands with appropriately programmed coordination information. Ligands based on 2,6-picolyldihydrazone (tritopic and pentatopic) and 3,6-pyridazinedihydrazone (tetratopic) cores, with tridentate coordination pockets, are highly specific and lead to the efficient self-assembly of square [3 x 3] Mn9, [4 x 4] Mn16, and [5 x 5] Mn25 nanoscale grids. Subtle changes in the tritopic ligand composition to include bulky end groups can lead to a rectangular 3 x [1 x 3] Mn9 grid, while changing the central pyridazine to a more sterically demanding pyrazole leads to simple dinuclear copper complexes, despite the potential for binding four metal ions. The creation of all bidentate sites in a tetratopic pyridazine ligand leads to a dramatically different spiral Mn4 strand. Single-crystal X-ray structural data show metallic connectivity through both mu-O and mu-NN bridges, which leads to dominant intramolecular antiferromagnetic spin exchange in all cases. Surface depositions of the Mn9, Mn16, and Mn25 square grid molecules on graphite (HOPG) have been examined using STM/CITS imagery (scanning tunneling microscopy/current imaging tunneling spectroscopy), where tunneling through the metal d-orbital-based HOMO levels reveals the metal ion positions. CITS imagery of the grids clearly shows the presence of 9, 16, and 25 manganese ions in the expected square grid arrangements, highlighting the importance and power of this technique in establishing the molecular nature of the surface adsorbed species. Nanoscale, electronically functional, polymetallic assemblies of this sort, created by such a bottom-up synthetic approach, constitute important components for advanced molecule-based materials.     

Ruthenium-catalyzed asymmetric epoxidation of olefins using H2O2, part I: synthesis of new chiral N,N,N-tridentate pybox and pyboxazine ligands and their ruthenium complexes

The synthesis of chiral tridentate N,N,N-pyridine-2,6-bisoxazolines 3 (pybox ligands) and N,N,N-pyridine-2,6-bisoxazines 4 (pyboxazine ligands) is described in detail. These novel ligands constitute a useful toolbox for the application in asymmetric catalysis. Compounds 3 and 4 are conveniently prepared by cyclization of enantiomerically pure alpha- or beta-amino alcohols with dimethyl pyridine-2,6-dicarboximidate. The corresponding ruthenium complexes are efficient asymmetric epoxidation catalysts and have been prepared in good yield and fully characterized by spectroscopic means. Four of these ruthenium complexes have been characterized by X-ray crystallography. For the first time the molecular structure of a pyboxazine complex [2,6-bis-[(4S)-4-phenyl-5,6-dihydro-4H-[1,3]oxazinyl]pyridine](pyridine-2,6-dicarboxylate)ruthenium (S)-2 aa, is presented.     

Synthesis,crystal structure,and magnetism of a binuclear Cu(II) complex with double azido as asymmetric basal–apical end-on bridged ligand

A new binuclear copper(II) complex, [Cu₂(μ_1,1-N₃)₂(PP)₂)] ? 2ClO₄ (PP = 2,6-dipyrazol-1-yl-pyridine), was synthesized with double azide as asymmetric end-on bridge ligand and 2,6-dipyrazol-1-yl-pyridine as the terminal ligand. The crystal structure was determined by X-ray crystallography. Cu(II) is located in a distorted square pyramidal geometry, and azide bridges the equatorial-axial linking two Cu(II) atoms with a separation of 3.3595(11) Å. The fitting for the data of the variable-temperature (2–300 K) magnetic susceptibilities by using the Curie–Weiss law gives the Weiss temperature θ = ?7.830 K, indicating a very weak anti-ferromagnetic interaction between the bridging Cu(II) complexes.     

Synthesis and structural characterization of di- and tetranuclear zinc complexes with phenolate and carboxylate bridges. Correlations between 13C NMR chemical shifts and carboxylate binding modes

Two di- and a tetranuclear zinc-carboxylate complexes with different coordination modes, [Zn(2)L(mu(1,3)-OAc)(2)](ClO(4)) (1), [Zn(2)L(mu(1,3)-Pro)(2)](ClO(4)) (2), and [Zn(2)L(mu(1,1)-HCO(2))(mu(1,3)-HCO(2))](2)(ClO(4))(2) (3) (where L = 2,6-bis(N-2-(2'-pyridylethyl)formimidoyl)-4-methylphenol, OAc = acetate, and Pro = propionate) have been synthesized. Their compositions and structures have been identified by elemental analyses, IR, NMR, and X-ray single-crystal diffraction. The cations in both 1 and 2 reveal that the two zinc ions are assembled by a phenolate and a pair of syn-syn mu(1,3)-carboxylate bridges with metal-metal distances of 3.281 and 3.331 A, respectively, and each polyhedron around the zinc ion is a slightly distorted trigonal bipyramid. Compound 3 is a tetranuclear complex consisting of two identical dinuclear subunits that connect to each other by the two formate groups. In each subunit, the pair of metal ions separated at 3.130(1) A is assembled by a phenolate oxygen from L, and a monodentate and a syn-syn bidentate formate bridges. The formate group displays a novel tridentate mode, namely, monodentate and syn-anti bidentate bridges. On the other hand, the solid-state (13)C NMR technique was employed to distinguish the different binding modes of acetate group in five-coordinate zinc complexes. The chemical shifts are as follows: chelating mode (ca. 184 ppm) > bidentate bridge (ca. 180 ppm) > monodentate bridge (ca. 176 ppm).     

Electronic structure, molecular electrostatic potentials, vibrational spectra in substituted calix[n]arenes (n = 4, 5) from density functional theory

Electronic structure, molecular electrostatic potential, and vibrational frequencies of para-substituted calix[n]arene CX[n]-R (n = 4, 5; R = H, NH(2), t-Bu, CH(2)Cl, SO(3)H, NO(2)) and their thia analogs (S-CX[n]-R; with R = H and t-Bu) in which sulfur bridges two aromatic rings of CX[n] have been derived from the density functional theory. A rotation around CH(2) groups connecting the phenol rings engenders four, namely, cone, partial cone, 1,2-alternate, and 1,3-alternate CX[n]-R conformers. Of these, the cone conformer comprising of large number of O1-H1···O1' interactions turns out to be of lowest energy. Normal vibration analysis reveal the O1-H1 stretching frequency of unsubstituted CX[n] shifts to higher wavenumber (blue shift) on substitution of electron-withdrawing (NO(2) or SO(3)H) groups, while electron-donating substituents (NH(2), t-Bu) engender a shift of O1-H1 vibration in the opposite direction (red shift). The direction of frequency shifts have been analyzed using natural bond orbital analysis and molecular electrostatic potential (MESP) topography. Furthermore, calculated (1)H NMR chemical shift (δ(H)) in modified CX[n] hosts follow the order: H1 > H3/H5 > H7(a) > H7(b). The δ(H) values in CX[4] are in consonant with the observed (1)H NMR spectra.     

Bis[bis-(4-alkoxyphenyl)amino] derivatives of dithienylethene, bithiophene, dithienothiophene and dithienopyrrole: palladium-catalysed synthesis and highly delocalised radical cations

Five diamines with thiophene-based bridges--(E)-1,2-bis{5-[bis(4-butoxyphenyl)amino]-2-thienyl}ethylene (1), 5,5'-bis[bis(4-methoxyphenyl)amino]-2,2'-bithiophene (2), 2,6-bis[bis(4-butoxyphenyl)amino]dithieno[3,2-b:2',3'-d]thiophene (3), N-(4-tert-butylphenyl)-2,6-bis[bis(4-methoxyphenyl)amino]dithieno[3,2-b:2',3'-d]pyrrole (4 a) and N-tert-butyl-2,6-bis[bis(4-methoxyphenyl)amino]dithieno[3,2-b:2',3'-d]pyrrole (4 b)--have been synthesised. The syntheses make use of the palladium(0)-catalysed coupling of brominated thiophene species with diarylamines, in some cases accelerated by microwave irradiation. The molecules all undergo facile oxidation, 4 b being the most readily oxidised at about -0.4 V versus ferrocenium/ferrocene, and solutions of the corresponding radical cations were generated by addition of tris(4-bromophenyl)aminium hexachloroantimonate to the neutral species. The near-IR spectra of the radical cations show absorptions characteristic of symmetrical delocalised species (that is, class III mixed-valence species); analysis of these absorptions in the framework of Hush theory indicates strong coupling between the two amine redox centres, stronger than that observed in species with phenylene-based bridging groups of comparable length. The strong coupling can be attributed to high-lying orbitals of the thiophene-based bridging units. ESR spectroscopy indicates that the coupling constant to the amino nitrogen atoms is somewhat reduced relative to that in a stilbene-bridged analogue. The neutral species and the corresponding radical cations have been studied with the aid of density functional theory and time-dependent density functional theory. The DFT-calculated ESR parameters are in good agreement with experiment, while calculated spin densities suggest increased bridge character to the oxidation in these species relative to that in comparable species with phenylene-based bridges.     

Chromium(III) complexes bearing bis(benzotriazolyl)pyridine ligands: synthesis,characterization and ethylene polymerization behavior

Reaction of benzotriazole with 2,6-bis(bromomethyl)pyridine and 2,6-pyridinedicarbonyl dichloride yields the tridentate ligands 2,6-bis(benzotriazol-1-ylmethyl)pyridine (1) and 2,6-bis(benzotriazol-1-ylcarbonyl) pyridine (2). The molecular structures of the ligands were determined by single-crystal X-ray diffraction. These ligands react with CrCl₃(THF)₃ in THF to form neutral complexes, [CrCl₃{2,6-bis(benzotriazolyl)pyridine-N,N,N}] (3, 4), which are isolated in high yields as air stable green solids and characterized by mass spectra (ESI), FTIR spectroscopy, UV–Visible, thermogravimetric analysis (TGA), and magnetic measurements. After reaction with methylaluminoxane (MAO), the chromium(III) complexes are active in the polymerization of ethylene showing a bimodal molecular weight distribution. A DFT computational investigation of the polymerization reaction mechanism shows that the most likely reaction pathway originates from the mer configuration when the spacer is CH₂ (complex 3) and from the fac configuration when the spacer is CO (complex 4).     

Bismuth 2,6-pyridinedicarboxylates: assembly of molecular units into coordination polymers, CO2 sorption and photoluminescence

Six inorganic-organic bismuth 2,6-pyridinedicarboxylate (pdc) compounds, [Bi(2,6-pdc)(3)]·3(dma), 1, [Bi(2,6-pdc)(3)]·3(dma)·2(H(2)O), 2, [Bi(2,6-pdc)(2)(dmf)]·(dma), 3, Bi(2,6-pdc)(2,6-pdcme)(MeOH), 4, [LiBi(2,6-pdc)(3)(H(2)O)]·2(dma), 5, and Li(5)Bi(2,6-pdc)(4)(H(2)O)(2), 6 (where dma = dimethyl ammonium cation, dmf = dimethylformamide and 2,6-pdcme = 6-methyl-oxycarbonyl pyridine 2-carboxylate) have been synthesized under solvothermal conditions and their structures determined by single crystal X-ray diffraction. Compounds 1-4 have molecular structures whereas compounds 5 and 6 form one- and three-dimensional frameworks, respectively. Compounds 1 and 2, both having similar monomeric bismuth coordination units, which are connected non-covalently into a (4,4)-connected square lattice by H-bonding interactions through dma cations. Compounds 3 and 4, both have a similar dimeric bismuth coordination unit. In 3, the dimers are connected into a one-dimensional chain by H-bonding interactions through dma cations. In the partially esterified and neutral 4, there was no such H-bonding interactions due to the absence of any dma cations. Compounds 5 and 6 have a similar monomeric bismuth coordination unit to that seen in 1 and 2. In 5, the monomers are connected through lithium cations into one-dimensional chains, which further interact non-covalently by H-bonding interactions through dma cations. In the lithium-rich 6, the monomers are connected by the lithium cations and 2,6-pdc anions into a three dimensional structure with intramolecular H-bonding interactions involving the water molecules. The non-porous 5 and 6 exhibit a reasonable amount of H(2) and CO(2) sorptions, respectively. Tb(3+)- and Eu(3+)-doped and co-doped 4 and 5 emit characteristic sensitized green/red/yellow-orange luminescence.     

Donor-functionalized lanthanide terphenyl complexes: Synthesis and structural characterization of 2,6-di(o-anisol)phenyl compounds of ytterbium,yttrium, and samarium

The syntheses and molecular structures of a number of 2,6-di(o-anisol)phenyl ([double bond]Danip-) -based bis(amide) and bis(alkoxide) compounds of ytterbium, yttrium, and samarium are reported. Additionally, NMR spectroscopic data are reported for the analogous diamagnetic yttrium compounds. Salt metathesis reaction of equimolar amounts of DanipLi and YbCl(3) in tetrahydrofuran at room temperature followed by addition of 2 equiv of KN(SiMe(3))(2) or KN(SiHMe(2))(2) produces DanipYb[N(SiMe(3))(2)](2) (1) and DanipYb[N(SiHMe(2))(2)](2) (2), respectively. The analogous reaction using SmCl(3) and KN(SiHMe(2))(2) produces DanipSm[N(SiHMe(2))(2)](2) (3). Reaction of DanipLi and YbCl(3) in tetrahydrofuran at room temperature followed by addition of 2 equiv of KO(2,6-diisopropylphenyl) produces DanipYb[O(2,6-diisopropylphenyl)](2) (4). Our attempts to also prepare the yttrium analogue of complex 4 yielded single-crystalline material of the tetrahydrofuran adduct DanipY(THF)[O(2,6-diisopropylphenyl)](2) (5). The molecular structures of the complexes 1-4 feature five-coordinate metal atoms and coordination polyhedra which can be described as distorted square-pyramidal rather than trigonal-bipyramidal, with the ipso carbon atom occupying the apical position. On the other hand, the molecular structure of the tetrahydrofuran-solvated yttrium Danip arylalkoxide compound 5 features a six-coordinate metal atom in a distorted trigonal-prismatic coordination environment. In all cases the Danip ligand system adopts the chiral (racemic) d,l form.     

Pentacoordinated Cu(II)/Zn(II) complexes bearing macrocyclic skeleton: synthesis, spectroscopic and molecular structure optimization studies

2,6-Diacetylpyridine and 1,2-diaminoethane in the presence of copper(II) and zinc(II) chlorides containing a few drops of acetic acid were condensed into compositions [CuLH2]2.2HCl.H2O (1), [Cu2LPyz]2.2HCl.4CH3COCH3 (2) [CuZnLPyz]2.2HCl.2CH3COCH3.10H2O (3) and [ZnL'Cl]3.3HCl.3H2O (4) substantiated by elemental analyses, IR, UV-vis, 1H NMR and FAB mass spectral data. Demetallation of a Ni(II) complex (isolated as above) afforded macrocyclic skeleton LH4, whereas L' symbolizes a skeleton of the ligand containing only ethylenediamine and 2,6-diacetylpyridine. Molecular structure optimization using MM2 force field calculations for the complexes revealed distorted square pyramidal geometry around Cu(II) centers in complexes 1 and 2 and tetrahedral geometry around Cu(II) and Zn(II) centers with different degrees of distortion in complex 3 whereas three Zn(II) atoms (each in distorted square pyramidal geometry) attached via Cl bridges form a cyclic structure in complex 4. In complexes 1 and 2,Cu-Cu = 2.63-2.66 angstroms indicated the possibility of coupling between the two Cu(II) centers which has been supported by lower magnetic moment as well as ESR spectra showing half-field signal.     

A novel 2D phosphomolybdate hybrid [Cu(En)(EnH)]2[P2Mo5O23] · 3H2O constructed from strandberg-type polyoxometalate units and copper-organic cation bridges

A 2D Strandberg-type phosphomolybdate hybrid [Cu(En)(EnH)]₂[P₂Mo₅O₂₃] · 3H₂O (I) (En = ethylenediamine) has been successfully synthesized under hydrothermal conditions and structurally characterized by elemental analyses, IR spectrum, UV spectrum and single-crystal X-ray diffraction. The molecular structural unit of I consists of one Strandberg-type [P₂Mo₅O₂₃]_6? subunit, two [Cu(En)(EnH)]³⁺ cations and three lattice water molecules. The most remarkable feature of I is that each molecular structural unit is connected with adjacent four same units by four [Cu(En)(EnH)]³⁺ bridges constructing the 2D organic-inorganic hybrid sheet structure with a 4-connected topology. As far as we know, such 2D hybrid sheet structure constructed from Strandberg-type phosphomolybdate units and copper-organic cation bridges is very rare.     

Heterotricyclodecane. XXVI. 2,6-Dioxatricyclo [3.3.2.03,7]decan,ein neuartiges isomers von 2,6-dioxaadamantan

2,6-Dioxatricyclo [3.3.2.0^3,7]decane, a Novel Isomer of 2,6-Dioxaadamantane Restriction among the great number of possible diheterotricyclodecanes to such with a carbocyclic 8membered ring (cyclooctane) as basic skeleton, which is crosswise bridged by two heteroatoms, and restriction to 5-, 6- and 7membered heterocyclic rings results in the isomeric diheterotricyclodecanes of the following five different structural types: 2,6-diheteroadamantane (a) , 2,7-diheteroisotwistane (b) , 2,7-diheterotwistance (c) , 2,8-diheterohomotwistbrendane (d) , and 2,6-diheterotricyclo [3.3.2.0^3,7]decane (e ; s. Scheme 1). Starting from a suitably C (5)^o(2)-functionalized 2,7-dioxaisotwistane, first representatives with the hitherto unknown skeleton of type e were prepared by molecular rearrangement involving neighboring group participation: 2,6-dioxatricyclo [3.3.2.0^3,7]decane (41) and the derivatives 34–40 thereof (Scheme 7).