Preparation of β-cyclodextrin-polyaniline complex in supercritical CO2

A method is proposed to prepare β-cyclodextrin (β-CD)/polyaniline (PANI) inclusion complex. In this route, benzoyl peroxide (BPO, the oxidant) is first encapsulated into the cavity of β-CD. Aniline is then carried into the cavity of β-CD by supercritical (SC) CO₂, which polymerizes in situ to form inclusion complex. The product is characterized by FT-IR, UV-Vis, ¹H NMR and XRD techniques. The results suggest that the columnar inclusion complexes may be formed.     

The release of TiO2 and SiO2 nanoparticles from nanocomposites

There is a growing interest in the development of nanocomposites consisting of organic polymers and TiO₂ or amorphous SiO₂ nanoparticles. These nanoparticles may be released from nanocomposites. There is evidence that amorphous SiO₂ and TiO₂ nanoparticles can be hazardous. Thus, in the design of nanocomposites with such nanoparticles, hazard reduction extending to the full nanocomposite life cycle would seem a matter to consider. Options for hazard reduction include: changes of nanoparticle surface, structure or composition, better fixation of nanoparticles in nanocomposites, including persistent suppression of oxidative damage to polymers by nanoparticles, and design changes leading to the release of relatively large particles.     

片状纳米结构CeO2晶体的制备及其吸附CO2性能

在室温下,将CeCl₃溶液与CO₂储存材料（CO₂SM）混合、搅拌0.5 h制备了片状碳酸铈前驱体（CCPs）,并在500℃下煅烧CCPs 4 h,制得平均尺寸为4.94 μm×0.92 μm,厚度为0.04~0.08 μm纳米结构片状CeO₂晶体。在此过程中,CO₂SM不但可以提供CO₃^2-,还能起到分散剂和结构导向剂的作用。反应过程中,系统地研究了CO₂SM用量、Ce³⁺浓度和搅拌时间3个因素对CCPs形态和大小的影响,得到最优制备条件：0.1 g CO₂SM和50 mL 0.03 mol·L^-1 Ce³⁺水溶液以1 000 r·min^-1转速在室温下搅拌0.5 h。煅烧CCPs后,所制备的片状CeO₂晶体在室温下CO₂吸附量可达0.554 mmol·g^-1。     

Preparation of COF2 using CO2 and F2 in the electrochemical cell with PbSnF4 as a solid electrolyte

Tetragonal PbSnF₄ was prepared by precipitation method with Pb(NO₃)₂ and SnF₂ aqueous solutions. The product was characterized using X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XFS), and the other chemical analyses. Tetragonal PbSnF₄ exhibited the highest electric conductivity of 3.2 Sm⁻¹ at 473 K in air as a fluoride ion conductor. We have investigated the possibility of COF₂ formation using CO₂ and F₂ in an electrochemical cell with PbSnF₄ as a solid electrolyte. At same time, we tried to produce an electric power from an electrochemical cell. This CO₂/F₂ electrochemical cell was constructed with a tetragonal PbSnF₄ disk having Au electrodes. The electromotive force was about 0.9 V at room temperature for 0.1 MPa CO₂/(0.01 MPa F₂ + 0.09 MPa Ar). However, the short circuit current density was 0.24 A m⁻², which was quite small. This current density was so small that no fluorocarbon compound was detected after 3 h discharge using FT-IR.     

La2(CO3)3纳米线的微乳液法制备与表征

La₂(CO₃)₃ nanowires were prepared in the nonionic surfactant microemulsion(Triton X-100/cyclohexane/water)system. Transmission electron microscopy (TEM) and selected area electronic diffraction (SAED) were used to characterize the shape and size of the products. The results showed that the pH value and concentration of mother solution, temperature and aging time all could affect the morphology and size of the La₂(CO₃)₃ nanowires. The lengths of the nanowires were more than 10 μm and the diameters were in the range of 30～200 nm.     

g-C3N4/Bi2O2CO32D纳米片复合材料的制备及可见光催化性能研究

采用自组装和化学沉淀法分别制得两种可见光驱动复合材料石墨相氮化碳/碳酸氧铋(g-C_3N_4/Bi_2O_2CO_3).采用X射线衍射光谱(XRD),紫外可见光谱、扫描电镜(SEM)、N_2吸附、电化学阻抗谱(EIS)和X射线光电子能谱(XPS)等分析手段对制备的催化剂进行了表征.结果表明,制备方法对纳米复合材料的晶相、形态及光学性能没有影响,但是影响g-C_3N_4和Bi_2O_2CO_3之间的相互作用力,导致光生电子-空穴对的分离速率存在显著差异.以可见光驱动苯酚和罗丹明B的降解实验为探针反应检测催化剂的光催化性能.实验结果表明自组装法得到的异质结催化剂中相互作用力更强,催化效果最高.O_2-是罗丹明B降解反应的主要活性物种,染料的光敏化、Bi_2O_2CO_3与g-C_3N_4综合效应,导致光生载流子电荷分离效率更高.     

制备工艺对NiFe2O4分解CO2活性的影响

随着大气中CO2浓度的增加,温室效应日趋严重,促使人们对大气中CO2的转化与消除这一课题更加重视。1990年Yutaka Tamaura[1]发现氧缺位磁铁矿几乎可以100%分解CO2后,为解决温室效应提供了一条新的探索途径。通过对不同铁酸盐MFe2O4(M=Fe,Mn[2],Co[3],Zn[4],Ni[5]等)分解CO2活性的考察,发现铁酸镍在300℃分解CO2的活性比其它铁酸盐都好。NiFe2O4的制备最常采用的是共沉淀法、柠檬酸溶胶凝胶法和水热法,3种方法由于制备     

CrOx/SiO2催化剂上丙烷在CO2气氛中脱氢反应的研究

采用XRD、UV-vis DRS、ESR和微分吸附量热等技术,考察了铬担载量分别为2.5、5和10wt%的CrO_x/SiO₂催化剂的结构、表面性质和氧化还原性能。结果表明,催化剂表面上存在多种Cr的氧化态和聚集形式。随着Cr担载量从2.5wt%到10wt%的逐渐增大,催化剂表面占主导地位的Cr物种由CrO₃单体转为多聚CrO₃和Cr₂O₃晶相。在CO₂气氛中催化剂对丙烷转化率和丙烯选择性的大小顺序为2.5wt%CrO_x/SiO₂>5wt%CrO_x/SiO₂>10wt%CrO_x/SiO₂,反应过程中的原位ESR和UV-visDRS测定结果表明,催化剂表面的反应活性中心为Cr⁵⁺,Cr⁵⁺可由催化剂预处理过程中Cr³⁺的氧化及丙烷反应过程中CrO₃单体的还原产生,在反应中CO₂可使Cr³⁺重新氧化为Cr⁵⁺.     

Synthesis and characterization of Fe2O3/SiO2 nanocomposites

Fe₂O₃/SiO₂ nanocomposites based on fumed silica A-300 (S_BET = 337 m²/g) with iron oxide deposits at different content were synthesized using Fe(III) acetylacetonate (Fe(acac)₃) dissolved in isopropyl alcohol or carbon tetrachloride for impregnation of the nanosilica powder at different amounts of Fe(acac)₃ then oxidized in air at 400–900 °C. Samples with Fe(acac)₃ adsorbed onto nanosilica and samples with Fe₂O₃/SiO₂ including 6–17 wt% of Fe₂O₃ were investigated using XRD, XPS, TG/DTA, TPD MS, FTIR, AFM, nitrogen adsorption, Mössbauer spectroscopy, and quantum chemistry methods. The structural characteristics and phase composition of Fe₂O₃ deposits depend on reaction conditions, solvent type, content of grafted iron oxide, and post-reaction treatments. The iron oxide deposits on A-300 (impregnated by the Fe(acac)₃ solution in isopropanol) treated at 500–600 °C include several phases characterized by different nanoparticle size distributions; however, in the case of impregnation of A-300 by the Fe(acac)₃ solution in carbon tetrachloride only α-Fe₂O₃ phase is formed in addition to amorphous Fe₂O₃. The Fe₂O₃/SiO₂ materials remain loose (similar to the A-300 matrix) at the bulk density of 0.12–0.15 g/cm³ and S_BET = 265–310 m²/g.     

In situ FT-IR spectroscopic study on the conformational changes of isotactic polypropylene in the presence of supercritical CO2

The conformational changes of isotactic polypropylene (iPP) under supercritical CO₂ condition with different pressure and temperature have been carefully studied by in situ Fourier-transform infrared spectroscopy (FT-IR). Analysis of the corresponding spectra shows that the conformational ordering by supercritical CO₂ results in the intensity enhancement of the regularity bands of iPP. Due to the high CO₂ concentration and strong intermolecular interaction, iPP can reach an equilibrium state in a short time at high CO₂ pressure. The equilibrium time increases with soaking temperature. After supercritical CO₂ treatment, two mechanisms, the formation of short helix from amorphous phase and the extension of short helix into long one, happen simultaneously. The latter mechanism undergoes quickly at the beginning of induced conformational changes and then slows down, resulting in the slight increase of crystallinity. At the same time, the conformational ordering in amorphous phase happens continuously until a thermodynamic equilibrium. In summary, in the presence of supercritical CO₂, the conformational ordering of iPP chains occurs exclusively in the amorphous region, with no impact on the crystal part.     

TiO_2纳米带光催化二氧化碳甲烷化

研究了在常温常压下TiO2纳米带光催化CO2催化加氢气反应。在紫外光照射下,二氧化碳的加氢还原产物为甲烷。利用高分辨TEM,XRD,UV-Vis DRS,低温氮吸附-脱附,TG等考察了催化剂与甲烷产率的构效关系。结果表明,在600℃焙烧时得到的双晶材料具有最佳的光催化活性。优异的光催化活性主要得益于TiO2双晶脱水纳米带(DNR Bicrystalline dehydratednanoribbon)。上面形成的纳米晶界能够提高催化剂在紫外区的光吸收能力,TiO2(B)和锐钛矿独特的双晶间隔结构也提高了界面电荷分离的效率。担载贵金属Pt显著地提高了反应速率。     

Li2ZrO3材料吸收CO2性能的进一步研究

用不同结构的ZrO₂合成了一系列在高温下吸收CO₂的Li₂ZrO₃材料，并详细的研究了反应物质的物理和化学性质对生成物吸收CO₂性能的影响。采用SEM、XRD以及TG分析法分别进行了材料结构及其吸收CO₂性能的表征，并使用XPS法测定了材料表面的元素组成。实验结果表明，使用不同结构的ZrO₂合成的Li₂ZrO₃，其吸收CO₂的性能明显的不同。用ZrO₂(t)(四方)合成的Li₂ZrO₃吸收CO₂的速度快，在500 ℃下，20% CO₂（80%空气）的气氛中保持3h，其吸收量可达25（±0.6）%（wt），而以ZrO₂(m)(单斜)为原料制备的Li₂ZrO₃在上述吸收条件下重量仅增加9（±0.6）%（wt）。此外，实验结果还表明化学元素的掺杂对用ZrO₂(m)合成的Li₂ZrO₃的CO₂吸收速度及吸收容量影响较大。     

S型异质结光催化剂ZnFe2O4/WO3的构筑及光催化还原CO2性能

通过在WO₃纳米片表面负载ZnFe₂O₄纳米颗粒,构建了一系列S型异质结光催化剂ZnFe₂O₄/WO₃,并研究了其光催化CO₂还原性能。在没有助催化剂和牺牲剂的条件下,所制备的ZnFe₂O₄/WO₃复合材料可对CO₂与水蒸汽进行光催化反应。优化后的材料光照5 h后CO₂还原产物CO和CH₄的产量分别为7.87和4.88 μmol·g^-1。相对于单相组分,CO和CH₄的产量明显提高。光催化活性的提高,归因于ZnFe₂O₄和WO₃异质结的形成以及光生载流子的S型电荷传输模式。     

Z型Ag-Cu2O/BiVO4光催化剂的光催化还原CO2性能

利用简单的化学还原沉积法将Cu₂O纳米球和Ag纳米颗粒均匀包裹在十面体BiVO₄表面,成功构建了一种具有高效电荷载流子分离/转移特性的Z型异质结光催化剂Ag-Cu₂O/BiVO₄。Ag-Cu₂O/BiVO₄在可见光下光催化CO₂还原为CO的产率可达5.37 μmol·g^-1·h^-1,分别是纯BiVO₄和Cu₂O的35.8倍和6.25倍。通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、X射线能谱(EDS)、紫外可见漫反射光谱(UV-Vis DRS)、光致发光(PL)光谱、瞬态光电流响应(TPC)和电化学阻抗谱(EIS)对Ag-Cu₂O/BiVO₄的晶体结构、形貌、组成、能带结构和吸光能力等进行了系统表征分析,并提出了其光催化体系还原CO₂的催化机理。     

Z型Ag-Cu2O/BiVO4光催化剂的光催化还原CO2性能

利用简单的化学还原沉积法将 Cu₂O纳米球和 Ag纳米颗粒均匀包裹在十面体 BiVO₄表面,成功构建了一种具有高效电荷载流子分离/转移特性的Z型异质结光催化剂Ag-Cu₂O/BiVO₄。Ag-Cu₂O/BiVO₄在可见光下光催化CO₂还原为CO的产率可达5.37 μmol·g^-1·h^-1,分别是纯 BiVO₄和 Cu₂O的 35.80倍和 6.30倍。通过 X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、X射线能谱(EDS)、紫外可见漫反射光谱(UV-Vis DRS)、光致发光(PL)光谱、瞬态光电流响应(TPC)和电化学阻抗谱(EIS)对 Ag-Cu₂O/BiVO₄的晶体结构、形貌、组成、能带结构和吸光能力等进行了系统表征分析,并提出了其光催化体系还原CO₂的催化机理。     

CO2在Na2Cr2O7溶液中的平衡溶解度模型

为研究重铬酸钠(Na₂Cr₂O₇)对CO₂溶解的影响, 本文在带有搅拌的气液相高压平衡釜内, 采用静态法测定了温度在313.2-333.2 K, 压力在0.1-1.9 MPa 范围内, 重铬酸钠浓度分别为0、0.361、0.650、0.901 mol·kg^-1 时, CO₂ 在Na₂Cr₂O₇溶液中的溶解度. 结果表明: (1) Na₂Cr₂O₇对CO₂ 的溶解有盐析效应; (2) CO₂ 在Na₂Cr₂O₇溶液中的溶解符合亨利定律, 并且CO₂溶解度是温度和Na₂Cr₂O₇浓度的函数, 且用改进的Setschenow方程和Peng-Robinson-Pitzer (PR-Pitzer)方程拟合了在此温度、压力及重铬酸钠浓度范围内的实验数据, 拟合效果较好, 并且其平均相对误差分别为4.24%和3.32%.     

S型异质结光催化剂ZnFe2O4/WO3的构筑及光催化还原CO2性能

通过在WO₃纳米片表面负载ZnFe₂O₄纳米颗粒,构建了一系列S型异质结光催化剂ZnFe₂O₄/WO₃,并研究了其光催化CO₂还原性能。在没有助催化剂和牺牲剂的条件下,所制备的ZnFe₂O₄/WO₃复合材料可对CO₂与水蒸汽进行光催化反应。优化后的材料光照5 h后CO₂还原产物CO和CH₄的产量分别为7.87和4.88 μmol·g^-1。相对于单相组分,CO和CH₄的产量明显提高。光催化活性的提高,归因于ZnFe₂O₄和WO₃异质结的形成以及光生载流子的S型电荷传输模式。     

大尺寸TiO2/SiO2大孔材料的制备及光降解性能

先以三维骨架聚合物为整体型模板,利用硅酸酯原位溶胶-凝胶过程并结合高温烧结的方法制备出大尺寸大孔径的SiO2载体,然后通过钛酸丁酯溶液浸渍、原位水解、煅烧制备出大尺寸的TiO2/SiO2大孔材料并用SEM、TEM、FTIR、XRD和XPS对其表征,结果表明SiO2载体具有三维连续的超薄层,TiO2以纳米薄层方式均匀地沉积在SiO2的三维超薄层上,形成TiO2/SiO2/TiO2三层夹心结构,层与层界面存在Si-O-Ti键,同时复合结构提高了TiO2由锐钛矿相向金红石相的转变温度.以甲基橙为目标降解物考察不同条件下制备的复合材料的光催化活性,采用复合材料吸入甲基橙溶液的方式,并借助甲醇萃取手段研究光降解动力学过程.结果表明,该复合材料具有较好的光降解催化活性,当焙烧温度为600℃和TiO2的负载量为54.5wt%时,其活性最大且降解速率常数达到1.78 h-1.     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

Water-soluble poly(2-(3thienyloxy)ethanesulfonic acid)/V2O5 nanocomposites: synthesis and electrochromic properties

Water-soluble conducting poly(2-(3thienyloxy)ethanesulfonic acid) (PTOESA)/V₂O₅ nanocomposite, (PTOESA)_xV₂O₅, was prepared by simply mixing PTOESA with V₂O₅ wet gel at room temperature. XRD data showed that the interlayer spacings of (PTOESA)_xV₂O₅ films are 14.0±1.5 Å and increased as the polymer content increased. These values are consistent with the insertion of polythiophene chains into the V₂O₅ layer gallery. The formation of alternative layers of PTOESA and V₂O₅ was further supported by depth profile SIMS analyses. Cyclic voltammograms of (PTOESA)_xV₂O₅ film showed two pairs of redox peaks with colors varying from orange, yellowish green, green, to purple blue, depending on the stoichiometry of the nanocomposites. Moreover, a synergetic effect was observed on the electrochromic properties of these nanocomposites. It was found that the optical contrast (ΔOD) of the composites is better than those of PTOESA and V₂O₅ at the film thickness from 150 to 500 nm. The oxidation optical response time of (PTOESA)_xV₂O₅ is independent of the stoichiometry and falls in between those of PTOESA and V₂O₅. At higher polymer content (x>0.5), the reduction optical response time of (PTOESA)_xV₂O₅ is smaller than those of PTOESA and V₂O₅. Variable temperature conductivity data showed that the conductivity of (PTOESA)_xV₂O₅ films increased as temperature increased, characteristic of thermal activated behavior, which was dominated by the interparticle contact resistance. The room-temperature conductivity of water-soluble (PTOESA)_xV₂O₅ films was in between those of PTOESA and V₂O₅ xerogel and higher conductivity was found in the composite with lower polymer content. The anomalous conductivity of (PTOESA)_xV₂O₅ with high PTOESA content may be due to the reason that the higher the polymer content, the bigger the grain size of (PTOESA)_xV₂O₅ film as revealed with scanning electron microscopy and AFM micrographs.