Synthesis and rapid characterization of amine-functionalized silica

Amine-functionalized colloidal silica finds use in a variety of applications and fundamental investigations. To explore convenient methods of synthesis and characterization of research-grade materials in relatively large quantities, nearly monodisperse colloidal silica particles were prepared by base-catalyzed hydrolysis of reagent-grade tetraethyl orthosilicate (TEOS) without the traditional time- and energy-consuming distillation step. Radius was varied reliably from 30 to 125 nm by changing the water/TEOS ratio. Asymmetric flow field flow fractionation (AF4) methods with online light scattering detection proved effective in assessing the uniformity of the various preparations. Even highly uniform commercial standards were resolved by AF4. The surface of the colloidal silica was decorated with amino groups using (3-aminopropyl) trimethoxysilane and spacer methyl groups from methyl-trimethoxysilane. The surface density of amino groups was quantified spectrophotometrically after reaction with ninhydrin; the nature of this analysis avoids interference from sample turbidity. As an alternative to the ninhydrin test, an empirical relationship between surface density of amino groups and zeta potential at low pH was found. The size of the colloidal silica was predictably decreased by etching with HF; this method will be effective for some preparations, despite a modest reduction in size uniformity.     

Electrolytic preparation of a reduced ninhydrin reagent for amino acid analysis

Summary A flow-through electrolysis using a column electrode was applied to the preparation of a reduced ninhydrin reagent suitable for a highly reproducible and sensitive determination of amino acids. Non-reduced ninhydrin solution, which could be stably stored for long duration even in contact with atmospheric oxygen, was fed at a constant flow rate of 0.25 ml min^–1 into the flow-through electrolysis cell, whereby ninhydrin was reduced to hydrindantin. The hydrindantin content in the reagent (presumably 1.61 mol%) was sufficiently constant for the subsequent quantitative reaction of the amino acids being eluted from the HPLC system. The electrolytically prepared reagent was practically identical with those prepared by chemical reduction.

---

Elektrolytische Herstellung von reduziertem Ninhydrinreagens für die AminosÄureanalyse

     

A spectrophotometric assay for solid phase primary amino groups

A rapid, sensitive, and convenient spectrophotometric assay was developed for the measurement of amino groups on solid supports. This method is based on the reaction of amino groups of solids with an excess ofo-phthaldialdehyde (OPA) and subsequent quantitative determination of unreacted OPA by reaction with glycine. Four solids possessing variable quantities of amino groups were examined. Results indicate that about 70% of the total surface amino concentration (determined by the microKjeldahl method) are available for ligand attachment. Unlike the spectrophotometric 2,4,6-trinitrobenzenesulfonic acid method, the OPA spectrophotometric assay is more rapid, sensitive, and convenient, and unlike the spectrofluorimetric OPA, it does not require sophisticated instrumentation.     

Fluorometric monitoring of organic reactions on solid phase

The direct monitoring of reaction progress on solid supports by fluorescence spectroscopy is described. An immobilized fluorescent tracer molecule (dansyl chloride) is used to monitor the reaction on OH resins (Argopore Wang, PS Wang, and Argogel Wang), both in batch and in parallel chemistry. Fluorescence measurements were obtained directly on solid phase. The method demonstrated to be a valuable tool for the quantitative determination of resin-bound hydroxyl groups, to study reaction kinetics and for continuously monitoring the progress of the conversion of the hydroxyl resins into the chlorinated ones. The procedure proposed is highly sensitive compared to the traditional ones. The system can be extended to monitor a variety of reactions on solid supports, and in conjunction with a well-established technique such as flow analysis, basic studies on solid-phase become possible.     

Colorimetric determination of reactive amino groups of a solid support using Traut’s and Ellman’s reagents

A simple colorimetric method has been developed for the quantitative determination of reactive amino groups of a solid support. The method calls for the use of a reagent that reacts specifically and facilely with amino groups and concurrently introduces free sulfhydryl groups. The latter can then be titrated colorimetrically by using the well-known Ellman’s reagent. Thus, an excess of 2-iminothiolane (Traut’s reagent) was reacted with amine-carrying solid supports. After removing unreacted 2-iminothiolane and keeping the resultant solid-phase sulfhydryl groups in a reduced state by using dithiothreitol, the solid supports, after being thoroughly washed, were then reacted with 5,5′-dithiobis-(2-nitrobenzoic acid) to quantify the sulfhydryl groups that were generated from reacting solid-phase amino groups with Traut’s reagents.     

Colorimetric determination of reactive primary amino groups of macro- and microsolid supports

The several factors that could affect the sensitivity and the accuracy of the determination of solid-supported amino groups using 2-iminothiolane (Traut's reagent) and 5,5′-dithiobis-(2-nitrobenzoic acid) (Ellman's reagent) are described. The authors found that by using 0.1M phosphate buffer, pH 8.0, instead of ethanol as solvent for the reaction of the solid supports with the 2-iminothiolane, using 0.1M phosphate buffer adjusted at pH 7.27 instead of 8.0 as diluent of 5,5′-dithiobis-(2-nitrobenzoic acid), and selecting carefully the concentration of the latter reagent, it was possible to produce a very sensitive assay capable of quantitatively determining the surface amino groups of very different types of samples. The assay is well adapted for quantitative determination of amino-carrying plastic beads, permitting the determination of nanomolar quantities. In addition, the assay is well suited for microparticulated solid supports (e.g., AH-Sepharose).     

Hyperbranched modification of unsaturated side chains of polyethylene introduced by γ-ray irradiation under a 1,3-butadiene atmosphere

 Amino and other functional groups were introduced to a polyethylene substrate starting from the unsaturated pendant and bridge groups (collectively called side chains) of polyethylene, which had been prepared by γ-ray irradiation under an atmosphere of 1,3-butadiene of the polyethylene substrate (the drawn film of ultra-high- molecular-weight polyethylene, Mˉv: 5 × 10⁶). 2-Aminoethylamino groups were introduced to the side chains through treatment either with bromine or with peracetic acid vapor followed by immersion in ethylenediamine. Introduction of amino groups were confirmed by Fourier transform IR spectrometry, ninhydrin test, and acid–base titration. Starting from 2-aminoethylaminated polyethylene, modification cycles to grow a dendrimer on the film were applied; these consisted of 2-methoxycarbonylethylation and 2-aminoethylamidation. This technique resulted in hyperbranched modification of the polymer. The product is a kind of dendrimer grown on the surface of polyethylene film with amplified amino ends and has anion-exchange capacity and absorbs acid dye. Its application in practical uses is discussed. Received: 31 March 2000 Accepted: 2 January 2001     

Iodine determination in biological materials Options for sample preparation and final determination

This paper describes the development of various new acid sample decomposition methods, as well as an extraction (leaching) method and compares them with the “Sch?niger Combustion” technique. The methods have been developed as sample preparation techniques for iodine determination in biological materials, especially in solid samples. ICP-MS (inductively coupled plasma mass spectrometry) and a catalytic technique are employed and discussed for the final determination of iodine concentrations. Accuracy and reliability of the different analytical methods are shown in the examples of different CRMs (certified reference materials) available for iodine. The results of an interlaboratory comparison are specifically presented for the extraction (leaching) method. Received: 11 May 1998 / Revised: 14 June 1998 / Accepted: 16 June 1998     

Hydrophile Polymergele mit reaktiven Gruppen, 2. Mitt.: Chelatharze auf Basis von Glucose- und Saccharosemethacrylaten

A widely applicable method for the preparation of chelating resins based on glucose- and sucrosemethacrylate-gels is described. Primary aromatic amino groups were bonded to the carrier by esterification with 4-nitrobenzoylchloride and subsequent reduction of the nitro groups with sodium dithionite. Diazotation and coupling with various chelating ligands (8-hydroxyquinoline, dithizone, anthranilic acid, salicylic acid and pyrogallol) afforded chelating resins with capacities of max. 1.7 mmol/g. Sucrosemethacrylate-gels were etherified with 4-nitrobenzylchloride, epichlorohydrin, 4-nitrophenyl glycide ether (IIb), acrylonitrile and 4-nitrophenylacrylamide (IVb). Reaction of the gels with IIb or IVb and subsequent reduction of the nitro groups yielded reactive carriers with ether-linked primary aromatic amino groups. Diazotation and coupling with 8-hydroxyquinoline yielded chelating resins. The capacities of the gels were 0.6–0.7 mmol/g and these resins were extremely stable to changes inpH.

     

A rapid and reversible colorimetric assay for the characterization of aminated solid surfaces

The covalent immobilization of synthetic or natural macromolecular compounds containing amino groups onto polystyrene (PS) solid surfaces is of great interest in diagnostic applications. A sensitive assay allowing the determination of reactive end groups is therefore a powerful tool for predicting the performance of the active surface. Recently, we reported the use of the Coomassie brilliant blue (CBB) colorimetric reagent to quantify protonated groups (N⁺) in linear and dendritic structures in solution (Coussot et al., Polym Int 58(5):511–518, 2009). In this work, a simple method using CBB dye for the characterization of PS aminated solid surfaces is developed. The proposed amino density estimation by colorimetric assay (ADECA) method is based on the reversible complexation of the dye with the N⁺ groups on solid surfaces. The assay measures the released dye thanks to the use of a unique sodium carbonate–methanol buffer. Thereby, for the first time, the same surface can be used for characterization and for further coupling applications. A surface density of four N⁺ groups per square nanometer can be measured in PS microwell format, the whole characterization being done within 30 min. Performances of this new colorimetric-based method are detailed. The ADECA method is further demonstrated to be useful for the characterization of aminated polypropylene and glass materials with various sizes and shapes.     

Quantitative analysis of 17 amino acids in tobacco leaves using an amino acid analyzer and chemometric resolution

A method was developed for quantifying 17 amino acids in tobacco leaves by using an A300 amino acid analyzer and chemometric resolution. In the method, amino acids were eluted by the buffer solution on an ion‐exchange column. After reacting with ninhydrin, the derivatives of amino acids were detected by ultraviolet detection. Most amino acids are separated by the elution program. However, five peaks of the derivatives are still overlapping. A non‐negative immune algorithm was employed to extract the profiles of the derivatives from the overlapping signals, and then peak areas were adopted for quantitative analysis of the amino acids. The method was validated by the determination of amino acids in tobacco leaves. The relative standard deviations (n = 5) are all less than 2.54% and the recoveries of the spiked samples are in a range of 94.62–108.21%. The feasibility of the method was proved by analyzing the 17 amino acids in 30 tobacco leaf samples.     

Determination of Hg,Cd, Mn,Pb and Sn in seafood by solid sampling Zeeman atomic absorption spectrometry

Direct solid sampling Zeeman atomic absorption spectrometric methods were developed and applied to the determination of mercury, cadmium, manganese, lead and tin in seafood. All elements but mercury were measured by a third generation Zeeman atomic absorption spectrometry combined with an automatic solid sampler. In 3-field- and dynamic mode the calibrations concentration range was substantially extended and high amounts of analyte were detectable without laborious dilution of solid samples. The measurements were based on calibrations using certified reference materials of organic matrices. In case solid certified reference materials were not available calibration by aqueous standard solutions was proved to be an alternative. No matrix effects were observed under the optimized conditions. Results obtained were in good agreement with the certified values. Solid sampling Zeeman atomic absorption spectrometry proved to be a reliable, rapid and low-cost method for the control of trace elements in seafood.     

On/off chemical determination of reactive amino groups immobilized on silica surfaces

Reaction of silica frameworks with aminosilanes to generate reactive amino groups on the surface of solid supports is a widely used step in the chemical modification of such surfaces. These reactive amino groups can aid in the chemical attachment ofproteins (enzymes and/or antibodies)_or chelating agents. Analytical accounting of the reactive groups generated is of interest in method optimization and in reactor design when these materials are used. A nondestructive method for the determination of reactive amino groups after attachment to silica surfaces is presented; it can be used for in-situ determinations in reactors. The method involves on/off chemistry based on the attachment of a chromophoric probe (p-dimethylaminoinnamaldehyde), its subsequent detachment under different experimental conditions, and spectrophotometric measurement of the released probe at 390 nm. Aspects of covalent attachment of amino groups to silica surfaces are also discussed.     

A mussel tissue certified reference material for multiple phycotoxins. Part 2: liquid chromatography-mass spectrometry, sample extraction and quantitation procedures

A freeze-dried mussel tissue certified reference material (CRM-FDMT1) containing multiple groups of shellfish toxins has been prepared. Toxin groups present in the material include okadaic acid and the dinophysistoxins, azaspiracids, yessotoxins, pectenotoxins, spirolides and domoic acid. In this work, analytical methods have been examined for the characterisation of the candidate CRM. A comprehensive extraction procedure was developed, which gave good recovery (>98%) for all lipophilic toxins studied. A fast liquid chromatography–mass spectrometry (LC-MS) method was developed that separates the major toxins according to the MS ionisation mode of optimum sensitivity. Matrix effects associated with analysis of these extracts using the developed LC-MS method were assessed. Standard addition and matrix-matched calibration procedures were evaluated to compensate for matrix effects. The methods and approaches will be used for the precise characterisation of the homogeneity and stability of the various toxins in CRM-FDMT1 and for the accurate assignment of certified values. The developed methods also have excellent potential for application in routine regulatory monitoring of shellfish toxins.     

Solid phase selective separation and green preconcentration of Cu, Zn, Pb and Cd in drinking water by using novel functionalized resin

A new solid — phase extraction sorbent was developed based on stepwise anchoring of two ligand molecules for the determination of copper, zinc, lead and cadmium in drinking water by flame AAS. Amberlite XAD-2 functionalized with 4′-(2-hydroxyphenylazo)-3′-methyl-1′-phenyl-2′-pyrazolin-5′-one (HPAPyr) was utilized for preconcentration/separation of these elements. The sorbent was prepared by two successive azo coupling reactions. First, 2-aminophenol was anchored to the amino groups in the resin resulted from nitration followed by reduction. Then, the resulted 2-aminophenol functionalized resin was further diazotized and coupled to the pyrazolone compound and the final product HPAPyr-XAD-2 was characterized by IR and elemental analysis. The optimum pH range for sorption, shaking time, exchange capacity, sample flow rate, preconcentration factor and interference from co-existing ions were investigated. All metal ions were quantitatively desorbed from the resin by 4.5 mol L⁻¹ nitric acid solution. The sorbent provides limit of detection within the range 0.9–3.3 μg L⁻¹ and concentration factor up to 250. The procedure was validated by analysis of certified material NIST-SRM 1577b. Application to drinking water showed satisfactory results with relative standard deviation RSD ≤ 8.5%.      

A definitive RNAA method for determination of selenium in biological samples: uncertainty evaluation and assessment of degree of accuracy

This article describes work on the development of a highly accurate RNAA method for determination of selenium in biological samples. The analytical post-irradiation procedure is based on a combination of cation-exchange and extraction chromatography with final selective and quantitative fixation of selenium on a column packed with 3,3′-diaminobenzidine (DAB) supported on Amberlite XAD4, followed by gamma-ray spectrometric measurement. The suitability and accuracy of the method was demonstrated by analysing CRMs with certified selenium content. The uncertainty budget for Se determination in standard reference material Peach Leaves NBS 1547 was estimated; the combined standard uncertainty was calculated as 1.7%. The described method fulfils all the criteria for definitive methods. It was subsequently used for determination of selenium in biological materials intended as new CRMs and proficiency test samples.     

氨基酸混合体系的PLS分光光度法测定

本文利用亮氨酸、异亮氨酸、色氨酸、赖氨酸和苏氨酸混合物与茚三酮在 PH值 5 .2的 HAc-Na Ac缓冲溶液中发生高灵敏度的显色反应 ,建立了用偏最小二乘 (PL S)分光光度法不经分离同时测定氨基酸混合物的方法。讨论了波长范围、波长间隔对测定结果的影响 ,并同卡尔曼滤波法 (KF)和氨基酸自动分析仪结果做了比较。     

Preparation and characterization of a molecularly imprinted polymer by grafting on silica supports: a selective sorbent for patulin toxin

A new molecularly imprinted polymer (MIP) has been prepared on silica beads using the radical “grafting from” polymerization method for selective extraction of minor contaminant mycotoxin of patulin (PTL). After the introduction of amino groups onto the silica surface with 3-aminopropyltriethoxysilane, azo initiator onto the silica surface was achieved by the reaction of surface amino groups with 4,4′-azobis(4-cyanopentanoic acid). The scale-up synthesis of MIP was then carried out in the presence of 6-hydroxynicotinic acid as template substitute, functional, and cross-linking monomers. The prepared sorbent was characterized using FT-IR spectroscopy, scanning electron microscopy, elemental analysis, and the adsorption–desorption selectivity, and the capacity characteristic of the polymer was investigated by a conventional batch adsorption test and Scatchard plot analysis. The results indicated that coated polymers had specific adsorption to PTL as compared with its co-occurring 5-hydroxymethyl-2-furaldehyde (hydroxymethylfurfural (HMF)), at the same bulk concentration for solution of PTL and HMF, the maximum absorbance in the solid-phase extraction (SPE) method to PTL were 93.97% or 0.654 μg/mg while to HMF they were 76.89% or 0.496 μg/mg. Scatchard analysis revealed that two classes of binding sites were formed in PTL-MIP with dissociation constants of 3.2 × 10⁻² and 5.0 × 10⁻³ mg/mL and the affinity binding sites of 8.029 and 1.364 mg/g, respectively. The recoveries of PTL were more than 90% for the developed MISPE and around 75% for the traditional liquid–liquid extraction in spiked apple juice samples. It was concluded that the method is suitable for the scale-up synthesis of PTL-MIP grafted on silica, and the polymer can be effectively applied as SPE coupled with high-performance liquid chromatography (HPLC) for the determination of PTL in apple juice or other related products.     

粉末压饼LA-ICP-MS测定土壤样品中微量元素

研究了采用粉末压饼制样LA-ICP-MS测定土壤样品中多元素的分析方法.在土壤样品中事先加入已知含量的In,并以聚四氟乙烯(PTFE)为粘合剂,在200 KN的压力下制备用于激光剥蚀的压饼.详细讨论了粉末压饼样品中元素的均一性及元素相对信号响应.所建立的方法用于土壤标准参考物质固体样品的直接分析,测定值与参考值具有较好的一致性.     

The preparation of supported ionic liquids (SILs) and their application in rare metals separation

This review summarizes the preparation methods of support ionic liquids (SILs) and their applications in rare metals separation. The rare metals separation includes the recovery of high value metal ions and the removal of heavy metal ions from wastewater. SILs can be used as a kind of highly efficient multifunctional separation materials. The preparation methods of SILs include chemical immobilization technique in which ILs moieties are supported on solid supports via covalent bonds and physical immobilization techniques in which ILs are immobilized on solid supports via physical method such as simple im- pregnation, sol-gel method. According to the difference of solid supports, this review summarizes the application of polymer supported ionic liquids (P-SILs), silica based material supported ionic liquids (SM-SILs) and membrane supported ionic liq- uids (M-SILs) in rare metals separation. P-SILs and SM-SILs prepared by chemical method with N-methylimidazolium group can be used as highly efficient anion exchangers with high thermal stability and good chemical stability for adsorption of Cr(VI), Re(VII), Ce(IV). P-SILs prepared via simple impregnation afforded IL functionalized solvent impregnated resins (SIRs) which showed high separation efficiency and selectivity in the separation of rare earths(III) (REs(III)). SM-SILs prepared via sol-gel method with IL doped in the support as porogens or extractant show high removal efficiencies and excellent stability for the separation of RE(III), Cr(III) and Cr(VI). M-SILs with IL as plasticizer or carrier show improved stability, high perme- ability coefficient and good selectivity for Cr(VI) transport. Different supports and different supporting methods were suffi- ciently compared. Based on the different practical application, different forms of SILs can be prepared for separation of rare metals with high separation efficiency and selectivity.