Raman intensities of liquids: Absolute scattering activities and electro-optical parameters of the halate ions ClO3−, BrO3−, and IO3− in aqueous solutions

Absolute Raman scattering activities of aqueous solutions of sodium bromate and lithium iodate have been measured against NaClO₄ as an external standard. Electro-optical parameters (EOPs) for the BrO and IO bonds were calculated. Equilibrium bond polarizabilities were estimated from refractive index measurements in connection with Raman intensities of the bending modes. Relations between Bragg—Slater radii and EOPs are discussed. EOPS calculated from experimental data are compared with those from ab initio calculations.     

Low-voltage thin-layer electrophoresis of inorganic anions on silica gel-G and titanium (IV) tungstate layers: separation of coexisting F−, Cl−, Br− and I−, I−, IO3− and IO4−, Fe(CN)64− and Fe(CN)63−

The electrophoretic behavior of twenty anions has been studied on silica gel-G, titanium (IV) tungstate and silica gel-G- titanium (IV) tungstate admixture layers using 0.1 M solutions of oxalic acid, citric acid, tartaric acid, succinic acid and acetic acid as background electrolyte. The mechanism of migration is explained in terms of adsorption and the solubility of various sodium or potassium salts of the anions in water. Titanium (IV) tungstate behaves only as an adsorbent and not as an ion exchanger. Being a cation exchanger, there is no exchange phenomenon occurring with anions. The migration of halides increase linearly with an increase in the bare ion radii of these ions. Differential migration of the anions on silica gel-G layers led to binary, ternary and quaternary separations of similar anions such as F⁻ – Cl⁻ – Br⁻ – I⁻, I⁻ – IO₃⁻ – IO₄⁻, BrO₃⁻ – IO₃⁻ and Fe(CN)₆³⁻ – Fe(CN)₆⁴⁻. The two cyanoferrate ions are separated from industrial waste water and from fixer and bleach solutions. The migration of anions has also been found to be in accordance with their lyotropic numbers.

     

The behaviour of cellulose in hydrated melts of the composition LiXċn H2O (X=I−, NO3−, CH3COO−, ClO4−)

The dissolution behaviour of cellulose in low temperature molten salts was investigated. Depending on the chosen anions in the melt, cellulose shows different reaction behaviour in different Li⁺containing melts. Dissolution of the polymer was observed in molten LiClO₄3H₂O and molten LiI2H₂O. In the hydrated melts of LiCH₃COO2H₂O and LiNO₃3H₂O a fine distribution of cellulose was stated. Cellulose can be regenerated by cooling the melt and removing the salt by dissolution in water.The structure of the recrystallized product is determined by the used low temperature molten salt.     

Demonstration of a pulsed photoelectron spectrometer on mass-selected negative ions: O−, O2−, and O4−

A new type of negative ion photoelectron spectrometer which utilizes time-of-flight for both ion mass selection and photoelectron energy analysis is described and demonstrated on the 532 nm photodetachment of the well-known O⁻ and O⁻₂ ions as well as the O⁻₄ cluster ion. Photoelectron spectra of O⁻₄ at 355 and 532 nm depend on laser power, suggesting that photodissociation competes with photodetachment at both wavelengths.     

Direct versus indirect many-body methods for calculating vertical electron affinities: applications to F−, OH− , NH2−, CN−, Cl−, SH− and PH2−

Electron propagator theory (EPT) is applied to calculating vertical ionization energies of the anions F⁻, Cl⁻, OH⁻,SH⁻, NH₂⁻, PH₂⁻ and CN⁻. Third-order and outer valence approximation (OVA) quasiparticle calculations are compared with ΔMBPT(4) (MBPT, many-body perturbation theory) results using the same basis sets. Agreement with experiment is satisfactory for EPT calculations except for F⁻ and OH⁻, while the ΔMBPT treatments fail for CN⁻. EPT(OVA) estimates are reliable when the discrepancy between second- and third-order results is small. Computational aspects are discussed, showing relative merits of direct and indirect methods for evaluating electron binding energies.     

Syntheses and characterization of Pb(trz) n X2 (X = CH3COO−, NCS−, and n = 1, 2) complexes,and crystal structure of [Pb(trz)2(MeOH)](ClO4)2·H2O

Lead(II) complexes with 2,4,6-tris(2-pyridyl)-1,3,5-triazine (trz) have been synthesized using a direct synthetic method and characterized by IR and ²⁰⁷Pb NMR spectroscopy and CHN elemental analysis. The structure of [Pb(trz)₂(MeOH)](ClO₄)₂·H₂O was confirmed by X-ray crystallography. Single-crystal X-ray data for [Pb(trz)₂(MeOH)](ClO₄)₂·H₂O show the complex to be monomeric with the Pb having an unsymmetrical seven-coordinate geometry, coordinated by six nitrogen atoms of the trz ligands and one oxygen atom of MeOH. The arrangement of the ligands in the [Pb(trz)₂(MeOH)](ClO₄)₂·H₂O complex exhibits a coordination gap around the Pb(II), occupied possibly by a stereoactive lone pair of electrons on lead(II); the coordination around the lead atoms is hemidirected.     

Transport of 125I−, 137Cs+ and 85Sr2+ in granitoidic rock and soil columns

Transport of ¹²⁵I^?, ¹³⁷Cs⁺ and ⁸⁵Sr²⁺ radionuclides in crushed granitoidic rocks and homogenized soils was studied. Two simple methods for calculation of breakthrough curves in flow column experiments with groundwater as transport medium have been described. The first method, so called non-linear approach, is derived on the assumption of a reversible non-linear sorption isotherm described with Freundlich equation, i.e., with non-constant distribution and retardation coefficients. The second method, so-called linear approach, is applied for reference only, and is based on the assumption of a reversible sorption characterized with linear sorption isotherm, i.e., with constant distribution and retardation coefficients. Both methods model the experimental breakthrough curves with the integrated form of the simple 1-D advection–dispersion equation (ADE) expressed analytically for pulse application of radiotracer to the liquid phase before entering the columns. The integrated form of the ADE equation was modified by the so-called peak position and peak height correction coefficients the advantage of which consists among others in the elimination of the influence of starting concentration. The comparison of both approaches has shown that fitting by means of non-linear approach has given rather reliable values of the transport parameters and calculated dependences, especially in a case of ¹³⁷Cs system characterized evidently with non-linear type of sorption isotherms. As for ¹²⁵I^?, the sorption capacity of all solid samples studied is nearly on the zero level and ¹²⁵I^? is practically not retarded, and from this point of view it behaves as non-interacting component. In addition, it was found that the modified ADE gives rather better results than the classical one.     

Study of Products of the Aqueous Chlorination of 2-Methylnaphthalene and α-Naphthol by Chromatography–Mass Spectrometry

Qualitative and quantitative analysis of products of the aqueous chlorination of 2-methylnaphthalene and -naphthol was performed by chromatography–mass spectrometry. Detailed schemes of their transformation under the conditions modeling the process of disinfection of natural water at water-treatment plants were formulated.     

Enthalpies of Dilution of Aqueous Solutions of HCl, MgCl2}, CaCl2, and BaCl2 at 300, 325, and 350°C

Dilution enthalpies, measured using isothermal flow calorimetry, are reported for aqueous solutions of BaCl₂ at 300°C and 11.0 MPa, MgCl₂, CaCl₂, and BaCl₂ at 325°C and 14.8 MPa, and at 350°C and 17.6 MPa. Previously collected dilution enthalpies for aqueous solutions of MgCl₂ and CaCl₂ at 300°C and 10.3 MPa and for aqueous solutions of HCl at 250, 275, and 300°C at 10.3 MPa and 320°C at 12.8 MPa were included with the new data at 300°C and 11.0 MPa and at 350°C and 17.6 MPa when fitting the Pitzer parameters. The concentration range of the chloride solutions was 0.5 to 0.02 molal. Parameters for the Pitzer excess Gibbs ion–interaction equation were determined from the fits of the experimental heat data. Equilibrium constants, enthalpy changes, entropy changes, and heat-capacity changes for the association of alkaline earth metal ions and H⁺ with chloride ion were estimated from the heat data. For all systems, the enthalpy and entropy changes are positive and show accelerating increases with temperature. The resulting equilibrium constants show significant, but smaller, increases with temperature.     

Solid state mechanism of the thermal dehydration of [Rh(NH3)5(H2O)]X3 (X = Cl−, Br−, I−)

The solid phase thermal deaquation-anation of [Rh(NH₃)₅(H₂O)]X₃ (X = Cl⁻, Br⁻, I⁻) has been investigated by means of isothermal TG measurements applying all the principal g(α) expressions (0.8 ⩾ α ⩾ 0.2). The values found for the activation energy are low: ≈ 95 kJ mol⁻¹ for the Cl⁻ compound; ~105 kJ mol⁻ for the Br⁻ compound and ≈110 kJ mol⁻¹ for the I⁻ compound. These data permit the assignment of the deaquation-anation mechanism of the S_N1 dissociative type, involving a square-based pyramid activated complex and elimination of water as Frenkel defects. These values are similar to those reported for the Co(III) and Ir(III) analogues, indicating that the D_q parameter is not the principal contribution to the activation energy of the dehydration-anation process.     

Rheological Properties of Mixed Aqueous Solutions of Geminis (12‐3‐12,2Br−) and SDS

The rheological properties of surfactant solutions are the main parameter that affects the surfactant application. In this work, the rheology of the mixed system 12‐3‐12,2Br^?/SDS/H₂O was discussed particularly. The relationship between the microstructure of surfactant aggregates and rheology of mixed solutions was explored. It is shown that the rheological properties of solutions have different behaviors at different molar ratio of two surfactants under given total concentration. With the increase of molar ratio (12‐3‐12,2Br^?/SDS), the solution change from Newtonian liquid into positive thixotropy then to negative thixotropy, at last turn to positive thixotropy again, and ATPS becomes the dividing line. The difference of rheological properties is the embodiment of difference for surfactant aggregates' microstructures. The cryo‐TEM results shown that the solutions containing aggregates with big size, such as rodlike micelles, multilamellar micelles, show positive thixotropy. However, the solutions containing lamellar micelles or liquid crystal will show negative thixotropy. The positive thixotropy endows the mixied system a potential application in enhanced oil recovery.     

Determination of Four Active Oxygen Species Such as H2O2, •OH, •O2 −, and 1O2 by Luminol and CLA-Chemiluminescence Methods and Evaluation of Antioxidative Effects of Hydroxybenzoic Acids

Abstract

Simple and rapid chemiluminescence (CL) assays for H₂O₂, ?OH, ?O₂ ^? and ¹O₂ using 5-amino-2,3-dihydro-1,4-phthalazinedione (luminol) or 2-methyl-6-phenyl-3,7-dihydroimidazo[1,2-α]pyrazin-3-one (CLA) as CL reagents were developed. The means of the intra-assay relative standard deviations of ten replicate measurements of H₂O₂ (25-120 μM), ?OH generated from Fe(II) ion (2.5-10 μM) in the presence of 980 μM H₂O₂, ?O₂ ^? generated from hypoxanthine (HX) (7-50 μM) in the presence of 9 × 10^?3 units xanthine oxidase (XO) and ¹O₂ generated from NaOCl (3-12 mM) in the presence of 97.6 μM H₂O₂ were found to be 4.0%, 2.8%, 2.4% and 8.7%, respectively. To validate the proposed methods, the scavenging abilities of three standard antioxidative compounds, such as L-ascorbic acid, (±)-α-tocopherol and superoxide dismutase (SOD) were examined for four active oxygen species and compared with those by anelectron spin resonance (ESR) spin-trapping method. In addition, the CL methods were also applied to establish the relationships between the decrease of CL intensity and the structures as well as redox characters of syringic acid, 3-hydroxybenzoic acid, 3,4-dihydroxybenzoic acid. From the obtained results, the scavenging effects to H₂O₂, ?OH, ?O₂ ^? and ¹O₂ of other dihydroxybenzoic acids were also evaluated.     

CeCl3·7H2O-Catalyzed Synthesis of 1-Oxo-hexahydroxanthene Derivatives in Aqueous Media

Cerium(III) chloride heptahydrate (CeCl₃·7H₂O) catalyzes the reaction of substituted salicylaldehydes with 1,3-cyclohexane dione or dimedone in aqueous medium at reflux temperature to afford the corresponding 1-oxo-1,2,3,4,9,10-hexahydroxanthene derivatives4 0 in high yields.     

On the Kinetics of Manganese Ferrite Formation From Aqueous Solution of MnO2 and FeSO4⋅7H2O

The authors present the results of a kinetic investigation concerning the formation and growth of the primary particles of the ferrite phase in isothermal conditions, in static and well-stirred regimes. The kinetics of coprecipitation is described with the help of equations corresponding to the homogeneous nucleation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and structure of antimony iodide complexes: [Ph3MeP] + 2 [SbI5]2−, [Ph3MeP] + 3 [Sb3I12]3−·Me2C=O, [Ph3MeP] + 3 [Sb3I12]3−, and [Ph3MeP] + 3 [Sb2I9]3−

Complexes with antimony-containing anions, [Ph₃MeP] ₊ ² [SbI₅]^2? (I), [Ph₃MeP] ₊ ² [Sb₃I₁₂]^3? (II), [Ph₃MeP] ₊ ³ [Sb₃I₁₂]^3? · Me₂C=O (III), and [Ph₃MeP] ₊ ³ [Sb₂I₉]^3? (IV), were synthesized by reacting triphenylmethylphosphonium iodide with antimony iodide. The central atom in the cations of the complexes has a distorted tetrahedral coordination. In the trinuclear anions of complexes II and III, each of the terminal SbI₃ groups is bound to the central Sb atom through two μ₂- and one μ₃ iodine bridges (SbSbSb angles are 103.0° and 102.2°, respectively). In the binuclear anion of complex IV, antimony atoms are linked with each other via three bridging iodine atoms.     

Thermodynamic Properties of Aqueous Solution of 2-Isopropoxyethanol at 25°C

Excess enthalpy, excess isobaric heat capacity, density, and speed of sound for aqueous 2-isopropoxyethanol solutions were measured at 25°C. The density was also measured at 20°C. The excess enthalpy was –800 J-mol^–1 at the minimum (mole fraction alcohol, x = 0.2), showing that the hydrogen bonds formed between unlike molecules are stronger than those in both pure liquid states. The excess volume also was large and negative, more than –1.2 cm³-mol^–1 at the minimum (x = 0.35). Excess isentropic and isothermal compressibilities are extremely negative. These results suggest that breaking the hydrogen bond network in water and forming the stronger hydrogen bonds between unlike molecules reduces the volume of the solution and makes the solution less compressible. The excess isobaric heat capacity is positive and large, up to 10 J-K^–1-mol^–1 and shows anomalous behavior in the neighborhood of x = 0.15.     

Synthesis of α-Selenoesters and α-Thiolesters via Sm/SbCl_3 System in Aqueous Media

SincethefirstBarbier-typereacti0ninaqueousmediainl977',organometallicreactionshaveattractedconsiderableattentioninorganicsynthesis'.lfonecanperformorganometallic-typereactionsinaque0usmediajustasgeneralIyandeasilyasin0rganicsoIvents,suchreactionsmay0fferconsiderableadvantagesf(l)Thereisthepracticalconvenienceofnothavingtohandleinflammableandanhydrousorganicsolvents.(2)Thetedioustaskofprotection-deprotectionchemistryforcertainfunctionalgroupsoftenenc0unteredin0rganicsynthesismaynotberequired.(…     

Synthesis and structure of antimony complexes [Ph3AmP] 2 + [Sb2I8 · 2DMSO]2−, [Ph3PrP] 2 + [Sb2I8 · C4H8O2]2−, and [(HOCH2CH2)3NH] 4 + [Sb4I16]4−

The reaction of equimolar amounts of triphenylamyl- and triphenylpropylphosphonium iodides and triethanolammonium iodide with antimony iodide in dimethyl sulfoxide, dioxane, or acetone gave complexes [Ph₃AmP] ₂ ⁺ [Sb₂I₈ · 2DMSO]^2?, [Ph₃PrP] ₂ ⁺ [Sb₂I₈ · C₄H₈O₂]^2?, and [(HOCH₂CH₂)₃NH] ₄ ⁺ [Sb₄I₁₆]^4?, the structure of which was established by X-ray diffraction analysis. The cations of all complexes have slightly distorted tetrahedral structure, and the antimony atoms in the anions are hexacoordinated. The crystals of the complexes have intra- and intermolecular contacts, which form the structure.