Mixed Formulations of Bending Problems for Homogeneous Elastic Plates and Beams

Mixed formulations of bending problems for homogeneous plates (beams) are proposed, whose essence is that the deformation of a plate (beam) near its fixed boundary is described by the threedimensional elasticity equations, and the remaining part by the conventional equations of plate (beam) bending. At the interface between these regions, the solutions of these equations are joined. The mixed formulation allows one to describe the threedimensional stress state in the neighborhood of the fixed boundaries of plates (beams) and take into account the complex nature of the fixing conditions. Finiteelement implementation is more efficient for the mixed formulations of plate (beam) bending problems than for the wellknown threedimensional formulations.     

Bending of Composite Plates under Static and Dynamic Loading

The stationary bending of a two-dimensional elastic system of joined rectangular plates with different mechanical properties and boundary conditions is studied. A technique for solving the corresponding problem is proposed. It is based on approximate approaches in combination with a generalization of the force method. It is established that the static strain state of the system is essentially dependent on the difference between the elastic moduli of the constituent plates. It is also shown that with certain boundary conditions, the dependence of the first resonant frequency on the relative position of plates along the contact line is nonmonotonic__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 1, pp. 77–84, January 2005.     

损伤弹性薄板的弯曲

通过损伤弹性薄板的变分方法,推导了损伤弹性薄板弯曲的运动控制方程．选取满足边界条件的挠度函数,采用Ritz法和 Galerkin法,将原问题转化为线性方程组的求解．通过算例分析,得到y=b/2处挠度和损伤随x的变化曲线,结果表明损伤薄板中任一点的位移总是大于无损薄板中的位移．     

复变形式的各向异性板弯曲问题的基本解

提出了求解各向异性板弯曲问题基本解的新方法。得到的基本解简捷明了，相应的法向弯矩和相当剪力的表达式易求，故便于应用在一般边界条件的各向异性板弯曲问题的边界积分方程。     

Determination of Interlaminar Stresses in Bending Problems for a Stack of Transversely Isotropic Plates

A mechanical and mathematical bending model for a stack of transversely isotropic plates is developed. The resolving equations for deflections and tangential displacements are supplemented with a system of differential equations for normal and tangential contact stresses. It is demonstrated that for stacks consisting of an arbitrary number of identical plates with no friction between them, the initial system of equations for contact stresses can be reduced to Helmholtz equations. This transition allows obtaining the complete eigenvalue spectrum for the Laplasian of the problem and, in special cases, eigenfunctions. They are Krylov functions when bending is cylindrical and Bessel functions when bending is axisymmetric     

圆板弹塑性弯曲的简单样条积分方程法

提出了圆板弹塑性弯曲的简单样条积分方程法.以径向转角作为未知量建立积分方程并结合B样条函数进行求解.这一方法具有域积分容易处理、精度高和计算简单的优点.计算结果表明本文解与文[2]解吻合良好.     

Natural Vibrations of Complex Bodies

The paper sets forth a modified preconditioned conjugate-gradient method with shifted aggregated multilevel preconditioning (MPCG_AMIS). The method is intended to solve large-scale natural-vibration problems. Such problems are typical for the finite-element analysis of buildings and other complex structures and bodies. Using a proper shift in preconditioning improves considerably the spectral properties of the preconditioner and, hence, improves convergence. Using the MPCG_AMIS allows us to avoid lock of convergence, which is the case in the conventional PCG method. The performance of the method is illustrated by examples     

Karman型正交异性矩形薄板非线性弯曲的统一求解方法

本文对Karman型四边支承正交异性薄板在5种不同边界条件下的几何非线性弯曲进行了统一分析。所设的位移函数均为梁振动函数。它们精确地满足边界条件，利用Galerkin方法和位移函数的正交属性，转换控制方程为非线性代数方程。用“稳定化双共轭梯度法”求解稀疏矩阵线性方程组以及“可调节参数的修正迭代法”求解非线性代数方程组，最后给出了相应的数值结果。     

四边简支矩形中厚板的弯曲

本文采用Reissner中厚板理论求解了四边简支矩形中厚板的弯曲问题。文中首先对Reissner中厚板理论的控制方程进行了适当的变更,使之成为非耦联的二阶偏微分方程组,然后利用有限积分变换法求解所得新的控制方程,得到了四边简支矩形中厚板受均布载荷作用下的解析解。文中所述方法可用以求解具有其它边界条件和载荷的矩形中厚板的弯曲问题,同时还可移植应用于其它中厚板理论。     

Integral Solution of a Problem with Non-Standard Boundary Conditions in an Enhanced Theory of Bending of Elastic Plates

A modified boundary integral equation method is used to solve a specific type of mixed boundary value problem in an enhanced theory of bending of elastic plates in which the effects of transverse shear deformation and transverse normal strain are taken into account. The problem considered is characterized by the fact that a combination of transverse displacement and bending and twisting moments is prescribed on the curve which bounds the middle surface of the plate. Both interior and exterior problems are formulated and the corresponding existence and uniqueness results derived.     

U型波纹管及相关结构环向屈曲的有限元分析(Ⅰ)--基本方程及环板的屈曲

U型波纹管是现代管道系统中最常见的一种位移补偿器 ,它由环板和具有正、负Gauss曲率的半圆环壳组成 ,在管道所传输的介质的压力作用下会发生屈曲。其中环向屈曲最为复杂 ,精确的理论分析非常困难 ,有限元分析也不多见。作者在分析前人工作的基础上 ,以圆环壳段为单元 (特定的旋转壳段单元 ,能自动退化成环板单元 ) ,限于弹性范围和线性化特征值问题 ,对介质压力作用下U型波纹管及其相关结构 (圆环板、圆环壳、半圆环壳 )的环向屈曲问题进行了分析。考虑了结构屈曲前的弯曲 ,计及压力的二次势能 ,导出的应力刚度矩阵和载荷刚度矩阵是非对称的。全部工作分为三部分 :(Ⅰ )基本方程 ,环板的屈曲 ;(Ⅱ )圆环壳、半圆环壳的屈曲 ;(Ⅲ )波纹管平面失稳的机理。本文为第一部分 ,除推导公式外 ,对不同边界和不同内外径之比的环板在径向均匀压力作用下的环向屈曲进行了计算 (轴对称的径向屈曲作为特例得到 ) ,给出了前屈曲应力分布、临界载荷及相应的屈曲模态 ,并将临界压力的值与前人基于vonK偄ｒｍ偄ｎ大挠度板的精确解进行了比较 ,吻合良好。     

基于高阶变形理论的夹层板的弯曲与振动

考虑面板和夹芯的面内刚度和横向剪切刚度以及抗弯刚度,考虑了高阶剪切变形,根据横向剪应变分布情况给出横向剪切转角的位移函数,基于哈密尔顿原理,推导了基于高阶变形理论、适用于软、硬夹芯情况夹层板的基本方程.作为算例,以四边简支条件下的夹层板的弯曲与振动,在不同的面板与芯层的弹性模量比和厚度比下进行了计算,并与Reissner理论、Hoff理论以及邓宗白基于Reissner理论的修正模型的计算结果进行了对比.与前述理论与方法相比,论文方法考虑因素更为全面,对夹层板的适用范围更为广泛,计算结果更为精确.针对Nastran软件计算夹层板的振动问题,对其适用范围作了简要分析.     

Influence of Geometrical Parameters on the Critical Load in Three-Dimensional Stability Problems for Rectangular Plates and Beams

Two- and three-dimensional stability problems for a rectangular plate under uniaxial compression are solved by the mesh method. It is shown that the difference between the critical loads obtained in the three- and two-dimensional problems is not greater than 5% for arbitrary fixation conditions and arbitrary length and thickness ratio of the plate     

有面内张力和剪力的四边支承各向异性平行四边形板振动、屈曲和弯曲的精确解

给出了弹性地基上四边支承的各向异性平行四边形板在面内张力和剪力作用下自由振动、屈曲和弯曲问题的精确的解析解。此解是利用叠加法得到的重富立叶级数解。与现有结果的比较验证了解的精确性。并给出了一些固定边和简支边组合的多种倾斜角的平行四边形板的自由振动、屈曲和弯曲的数值结果。     

Spline-Approximation Method Applied to Solve Natural-Vibration Problems for Rectangular Plates of Varying Thickness

The natural vibrations of anisotropic rectangular plates of varying thickness with complex boundary conditions are studied using the spline-collocation and discrete-orthogonalization methods. The basic principles of the approach are outlined. The natural vibrations of orthotropic plates with parabolically varying thickness are calculated. The results (natural frequencies and modes) obtained with different boundary conditions are analyzed __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 10, pp. 90–99, October 2005.     

Nonlinear Deformation and Stability of Elliptic Cylindrical Shells under Torsion and Bending

The problem of nonlinear deformation and buckling of noncircular cylindrical shells under combined loading is solved by the variational finite-element method in the displacement formulation. A numerical algorithm for solving the problem is proposed. Stability of cylindrical shells with an elliptic cross-sectional contour under a combined action of torsion and bending is analyzed. The effect of cross-sectional ellipticity and nonlinear prebuckling deformation on the critical loads and buckling mode is studied.     

复合材料正交加筋板在横向载荷下挠度计算的半解析法

本文采用一种新的半解析法,即独特利用Heaviside函数建立与加筋板等效的变刚度模型来开展复合材料双向正交加筋板在横向载荷下的弯曲挠度分析．此模型可以准确地描述筋条在板面上的分布,以及由于筋条的存在而导致的板面刚度不均匀分布．使用Galerkin加权残值法求解该模型的控制方程,得到不同边界条件和载荷情况下的级数解．对于双向正交加筋板,将此半解析法的结果与传统均匀化方法和使用商业有限元软件ABAQUS建立的有限元模型所得到的弯曲挠度结果比较,验证了此方法的准确性和优越性．不同于传统均匀化方法,本双向正交加筋板的弯曲挠度半解析法可精确、有效地获取加筋间的局部弯曲挠度,可以促进复合材料结构的设计分析与优化的研究进展．     

双调和方程奇异边界法的改进及在Kirchhoff板弯曲中的应用

奇异边界法(SBM)是一种基于边界离散的无网格数值方法,在很多科学计算和工程领域中得到广泛的应用．该方法在处理复杂几何区域或者多连通区域时比基本解方法(MFS)数值计算更为稳定,具有易于实施、精度高等优点．SBM数值计算的关键之处在于源强度因子的计算,特别是相对于Laplace方程更为复杂的双调和方程的边界条件下源强度因子的计算．在高阶导数边界条件下,采用反插或者“加减项”原理计算源强度因子相对繁琐．本文对双调和方程的SBM进行了改进,将其中一个插值基函数改进为非奇异基函数形式,避免计算该基函数的源强度因子,极大简化了SBM的数值计算．本文改进对MFS同样有效,可以作为对传统MFS数值算法的补充．数值算例结果表明,本文提出的改进均能得到误差很小的数值解,且算法稳定,计算效率较高．     

Transverse Vibrations of Laminated Beams in Three-Dimensional Formulation

A new asymptotic method is proposed to describe the free and forced transverse vibrations of elastic laminated beams of arbitrary cross section using the three-dimensional elastic equations without additional hypotheses and constraints. For beams with layers of equal Poisson's ratio, the zero-order natural frequencies are equal to the natural frequencies predicted by classical beam theory based on the Bernoulli hypothesis. The method makes it possible to calculate the frequencies of free vibrations and amplitudes of forced vibrations with prescribed accuracy for the first natural modes __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 6, pp. 56–71, June 2005.     

薄板稳定问题的边界元法

本文基于小挠度薄板弯曲问题的基本解,建立了求解薄板稳定问题的边界积分方程,并计算了若干算例,结果表明用边界元法求解薄板的稳定问题是行之有效的.