麦芽糖浆的制备实验设计及教学效果

为提高化学实验的综合性、创新性、探索性,设计了以自制淀粉酶为催化剂催化淀粉水解制备麦芽糖浆的实验。实验结果表明,自制淀粉酶的最佳催化温度为55°C,符合酶催化反应的特征。实验设计突出农林院校的专业特色,促进理论教学和生产实践相结合,有利于培养大学生的科学精神,同时是一次深刻的课程思政教学过程。     

催化水解反应的肽基模拟酶的活性来源、催化机理及应用

肽基材料由于其与蛋白质高度相似和结构可控等优势,是构建人工模拟酶的一种理想材料;此外,小肽中氨基酸排列的多样性、序列的自组装特性、纳米结构稳定性、结构简单易于设计、良好生物相容性等优势,使得构建具有高效催化活性的肽基模拟酶具有非常好的应用前景。利用肽基材料通过理性设计活性位点来构建模拟酶具有多方面优势:(1) 氨基酸序列可以直接从天然酶中的活性位点获得,保留酶的功能,但降低了酶固有的复杂性;(2) 肽序列中可以嵌入各种具有特定结构及功能的活性位点,便于对模拟酶进行人工理性设计;(3) 肽具有良好的生物相容性,可以在温和条件下催化反应进行。根据催化降解化学键的不同,可将肽基水解模拟酶分为以下几种:催化酯键降解的肽基模拟酶、催化肽键降解肽基模拟酶、催化糖苷键水解的肽基模拟酶。本文主要分析了具有水解酶活性的肽基模拟酶的活性来源、构建方法及微观结构、催化反应类型、催化影响因素、活性改善方法、作用机理及未来潜在应用等;以期为构建具有高效水解催化活性的模拟酶提供借鉴,推进肽基水解模拟酶的研究发展及实际应用。     

化学-酶多步串联反应及其在高附加值手性化合物高效、绿色合成中的应用

与化学催化或酶催化合成相比,化学-酶相结合的多步串联反应是一种更简单、高效、经济的方法,兼具酶催化剂的高效、高选择性等优点,且合成原料价廉易得,合成工艺简捷高效,生产环境绿色友好,所得产品光学纯度高,使其在高附加值手性化合物的开发和合成方面得到了广泛的应用.近年来,化学家们通过改变催化剂和设计更为合理的反应方式,致力于将化学-酶催化反应条件变得更为容易,从而将其应用于更多反应领域.综述了近年来国内外化学-酶多步串联反应,如酶与金属催化、酶与有机催化、酶与新型反应技术等相结合多步串联合成手性醇类、环氧类、杂环类以及其他手性化合物的研究进展,并对该领域的发展趋势进行了展望.     

纳米沸石修饰微通道反应器内固定化酶催化的水解反应动力学

通过在毛细管内层叠层组装纳米沸石并固定脂肪酶来构建纳米沸石修饰的固定化酶微反应器通道,将纳米沸石良好的生物相容性和高的酶固定能力与微反应器反应效率高、扩散传质快等优点相结合. 以对硝基苯棕榈酸酯的水解作为探针反应对该微反应器内固定化酶催化水解反应动力学进行了研究和计算,并与普通反应器内同样的反应进行比较. 通过对比米氏方程参数,证实在微反应器内酶催化水解反应效率可比普通反应器内提高3倍以上并可提高酶和反应底物的亲和能力.     

聚醚桥连二异羟肟酸配合物催化羧酸酯水解的动力学研究

研究羧酸酯和磷酸酯的水解在环境和生物应用等方面具有越来越重要的意义。为实现对环境友好、高经济效益的生产过程,许多研究者致力于研发反应条件温和、催化效率高和高度专一性的催化剂。因而,仿酶研究倍受人们的关注,其中,水解金属酶是被研究得较为广泛的一类。我们曾报道过异羟肟酸过渡金属配合物仿生催化氧化性能和二氧亲合性能。本文我们将4种聚醚桥连二异羟肟酸过渡金属铜（Ⅱ）、锌（Ⅱ）、钴（Ⅱ）和锰（Ⅱ）配合物（见图1）作为仿水解酶模型,在底物浓度高于催化剂浓度10倍以上的条件下,研究了配合物在缓冲溶液中催化α-吡啶甲酸对硝基苯酯（PNPP）的水解反应的机理,并建立了相应的动力学数学模型;考查了配合物中心金属离子、溶液酸度和反应温度等对催化PNPP水解反应性能的影响。     

猪肝DFP酸催化水解反应产物的等速电泳分析

DFP酸可催化水解二异丙基氟磷酸酯（DFP）分子中的P－F键,使其断裂产生磷酸二异丙基酯和HF。根据电位滴定法和离子选择电极法对猪肝中发现的两种DFP水解酶活力测定的结果,利用毛细管等速电泳分析仪对这两种酶催化DFP水解的产物进行了定性分析。结果表明,猪肝中小分子质量的酸催化DFP水解反应时,并非水解P－F键．而是水解P－OR键,说明该酶是一种催化DFP分子中磷酯健水解的磷酯酶。     

氨基酸合成方法研究 IV: 相转移催化下N-氰甲基亚氨酸酯的烷基化反应

研究了在固液相转移催化条件下, N-氰甲基苯甲亚氨酸酯的烷基化反应, 得到烷基化产物C-烷基化的亚氨酸酯, 烷基化产品不需进一步纯化就可水解得到α-氨基酸, 利用这一方法合成了十个α-氨基酸.     

聚碳酸1,2-丙二酯的碱催化水解研究

研究了高分子量聚碳酸1,2-丙二酯的碱催化水解反应,并通过核磁共振谱仪和气相色谱质谱联用仪对降解反应产物的解析,发现碱催化聚碳酸1,2-丙二酯水解是无规断链反应和解拉链反应共同作用的结果.结果表明高分子量聚碳酸1,2-丙二酯的碱催化水解是制备低分子量聚碳酸1,2-丙二酯的方法之一.     

猪肝DFP酶催化水解反应产物的等速电泳分析

ＤＦＰ酶可催化水解二异丙基氰磷酸酯分子中的Ｐ－Ｆ键,使其断裂产生磷酸二异丙基酯和ＨＦ。根据电位滴定法和离子选择电极法对猪肝中发现的两种ＤＦＰ水解酶活力测定的结果,利用毛细管等速电泳分析仪对这两种酶催化ＤＦＰ水解的产物进行了定性分析。     

酶复合催化剂原位合成新方法及生物催化应用

工业生物催化面临两大重要挑战,一是可工业应用的酶催化反应类型仍然比较有限,远少于化学催化剂,因此需要拓展酶催化的反应类型;二是酶在苛刻的工业催化反应条件下尤其是在高温、有机溶剂、不适宜的pH等环境下稳定性较差,因此需要提高工业酶催化剂的稳定性.研究者已经开发了很多方法,以解决这两方面难题,例如酶的定向进化、定点突变、酶的计算机从头设计和构建人工金属酶等.本文系统介绍了本课题组开发的酶复合催化剂原位合成方法及其生物催化应用,期望为解决工业生物催化的上述挑战提供新思路.原位合成是构建酶-无机晶体复合催化剂的一种简便、高效、普适的方法.酶-无机晶体复合物中,限域包埋使酶具有高于常规固定化酶的催化活性和稳定性.该方法可以简便拓展至其它多种类型的无机晶体材料,显著提高酶的稳定性.无机晶体的限域包埋对酶分子结构和性能有着重要影响,通过理性设计复合催化剂的结构,可实现对酶的活性、稳定性以及多酶反应级联效率的有效调控.本课题组采用分子模拟和实验相结合的方法阐释了多酶-无机晶体复合催化剂所驱动的级联反应效率提高的关键因素.通过调控原位合成中金属离子和有机配体的浓度,实现了酶分子在缺陷型甚至无定形载体中的包埋.在此基础上,深入探讨了缺陷对酶分子结构和催化活性的调控机制,为酶复合催化剂的理性设计提供了依据.同样基于原位合成方法,本课题组构建了酶-金属团簇复合催化剂,实现了温和条件下酶催化和金属催化的高效耦合和协同.以脂肪酶-钯团簇复合催化剂为例,阐明了酶-金属团簇复合催化剂中二者相互作用对酶分子结构和活性以及金属催化活性的影响机制,为酶催化和金属催化相融合的研究提供了重要基础.我们对这一领域存在的挑战和未来重要的研究方向也进行了讨论,希望本文可以从催化剂工程角度为高效酶催化剂的设计以及生物催化应用领域的拓展提供新思路,推动该领域发展.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.