Thermal degradation of copolymers based on selected alkyl methacrylates

The thermal stability and thermal degradation of copolymers based on selected alkyl methacrylates at temperatures between 250 and 400?°C have been studied using pyrolysis?Cgas chromatography. The type and composition of thermal degradation products gave useful information about the mechanism of pyrolysis of copolymers synthesized by using typical commercially available alkyl methacrylates. It was observed that the main thermal degradation products from alkyl methacrylate copolymers are monomers of alkyl methacrylates using by synthesis. Other pyrolysis by-products formed during thermal degradation were carbon dioxide, carbon monoxide, methane, ethane, methanol, ethanol, and propanol-1.     

Pyrolysis of poly(2-propylheptyl acrylate)

The thermal destruction processes of poly(2-propylheptyl acrylate) take place at the range of temperature 250–950 °C was investigated using pyrolysis–gas chromatography. Knowledge of the types and amounts of pyrolysis products will provide important information about the thermal degradation of homopolymer poly(2-propylheptyl acrylate) and the mechanisms involved. Unsaturated monomers 2-propylheptyl acrylate and 2-propylheptyl methacrylate, according to by-product alkyl alcohol 2-propylheptylalcohol, alkene 2-propylheptene-1, carbon dioxide, carbon monoxide, methane, and ethane were formed during thermal degradation of poly(2-propylheptyl acrylate).     

Degradation of poly(acrylates) under SF5+ primary ion bombardment studied using time‐of‐flight secondary ion mass spectrometry. 3. Poly(hydroxyethyl methacrylate) with chemical derivatization

Molecular depth profiling of polymers by secondary ion mass spectrometry (SIMS) has focused on the use of polyatomic primary ions due to their low penetration depth and high damage removal rates in some polymers. This study is the third in a series of systematic characterizations of the effect of polymer chemistry on degradation under polyatomic primary ion bombardment. In this study, time‐of‐flight SIMS (ToF‐SIMS) was used to assess 5 keV SF₅⁺‐induced damage of ～90 nm thick spin‐cast poly(2‐hydroxyethyl methacrylate) (PHEMA) and ～130 nm thick trifluoroacetic anhydride‐derivatized PHEMA (TFAA‐PHEMA) films. The degradation of these polymers under extended SF₅⁺ bombardment (～2 × 10¹⁴ ions cm^?2) was compared to determine the effect of the pendant group chemistry on their degradation. The sputter rate and ion‐induced damage accumulation rate of PHEMA were similar to a poly(n‐alkyl methacrylate) of similar pendant group length, suggesting that the addition of a terminal hydroxyl group to the alkyl pendant group does not markedly change the stability of poly(n‐alkyl methacrylates) under SF₅⁺ bombardment. The sputter rate and ion‐induced damage accumulation rate of TFAA‐PHEMA were much higher than a poly(n‐alkyl methacrylate) of similar pendant group length, suggesting that derivatization of the terminal hydroxyl group can significantly reduce degradation of the polymer under SF₅⁺ bombardment. This result is in good agreement with the literature on the thermal and radiation‐induced degradation of fluorinated poly(alkyl methacrylates), which suggests that the electron‐withdrawing fluorinated pendant group increases the probability of depolymerization. Copyright © 2004 John Wiley & Sons, Ltd.     

Thermal degradation of linear polyurethanes and model biscarbamates

Thermal degradation of model biscarbamates, polyurethanes and poly(urethane-ureas) has been investigated by pyrolysis at atmospheric pressure. The biscarbamates were prepared from phenyl, benzyl, and cyclohexyl isocyanate and ethylene glycol. The polyurethanes and poly(urethane-ureas) were prepared from tolylene diisocyanate (TDI), xylylene diisocyanate (XDI), and 4,4′-dicyclohexylmethane diisocyanate (H₁₂-MDI) and poly(oxyethylene glycols) of various molecular weights. Rate constants for thermal degradation were obtained by measuring carbon dioxide evolution. The thermal degradation of all materials showed that the stability increased in the following manner: aromatic < aralkyl < cycloaliphatic. The separation and identification of the products of the thermal degradation gave an insight into the mechanisms involved in the pyrolysis of aromatic, aralkyl, and cycloaliphatic biscarbamates and the influence of temperature on these mechanisms.     

Thermogravimetric analysis of poly(alkyl methacrylates) and poly(methylmethacrylate-g-dimethyl siloxane) graft copolymers

The thermal stabilities of various poly(alkyl methacrylate) homopolymers and poly(methyl methacrylate-g-dimethyl siloxane) (PMMA-g-PSX) graft copolymers have been determined by thermogravimetric analysis (TGA). As expected, the thermal stabilities of poly(alkyl methacrylates) were a function of the ester alkyl group, and polymerization mechanism. In particular, thermally labile linkages, which result from termination during free radical or nonliving polymerization mechanisms, decrease the ultimate thermal stabilities of the polymers. However, graft copolymers, which were prepared by the macromonomer technique with free radical initiators, exhibited enhanced thermal stability compared to homopolymer controls. A more complex free radical polymerization mechanism for the macromonomer modified polymerization may account for this result. © 1994 John Wiley & Sons, Inc.     

Controlled radical polymerization of anthracene‐containing methacrylate copolymers for stimuli‐responsive materials

Novel reversible networks utilizing photodimerization of crosslinkable anthracene groups and thermal dissociation were investigated. Reversible addition‐fragmentation chain transfer polymerization yielded well‐defined copolymers with 9‐anthrylmethyl methacrylate (AMMA) and other alkyl methacrylates such as methyl methacrylate (MMA) and 2‐ethylhexyl methacrylate (EHMA) having different AMMA compositions. Well‐controlled block copolymerization of AMMA and alkyl methacrylates was also successfully accomplished using a trithiocarbonate‐terminated poly(alkyl methacrylate) macro‐chain transfer agent. The anthracene‐containing copolymers showed reversibility via crosslinking based on photodimerization with ultraviolet irradiation and subsequent thermal dissociation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2302–2311     

Degradation of poly(acrylates) under SF5+ primary ion bombardment studied using time‐of‐flight secondary ion mass spectrometry. 2. Poly(n‐alkyl methacrylates)

Polyatomic primary ions offer low penetration depth and high damage removal rates in some polymers, facilitating their use in the molecular depth profiling of these polymers by secondary ion mass spectrometry (SIMS). This study is the second in a series of systematic characterizations of the effect of polymer chemistry on degradation under polyatomic primary ion bombardment. In this study, time‐of‐flight SIMS (ToF‐SIMS) was used to measure the damage of ～90 nm thick spin‐cast poly(methyl methacrylate), poly(n‐butyl methacrylate), poly(n‐octyl methacrylate) and poly(n‐dodecyl methacrylate) films under extended (～2 × 10¹⁴ ions cm^?2) 5 keV SF₅⁺ bombardment. The degradation of the poly(n‐alkyl methacrylates) were compared to determine the effect of the length of the alkyl pendant group on their degradation under SF₅⁺ bombardment. The sputter rate and stability of the characteristic secondary ion intensities of these polymers decreased linearly with alkyl pendant group length, suggesting that lengthening the n‐alkyl pendant group resulted in increased loss of the alkyl pendant groups and intra‐ or intermolecular cross‐linking under SF₅⁺ bombardment. These results are partially at variance with the literature on the thermal degradation of these polymers, which suggested that these polymers degrade primarily via depolymerization with minimal intra‐ or intermolecular cross‐linking. Copyright © 2004 John Wiley & Sons, Ltd.     

Influence of structural factors on degradation product formation: Primary pyrolysis products of poly(acyl sulfides) investigated by direct pyrolysis mass spectrometry

Thermal degradation of two poly(acyl sulfide) polymers, poly(adipoyl sulfide) (PADS) and poly(terephthaloyl sulfide) (PTS) was investigated by direct pyrolysis mass spectrometry (DPMS). The structures of pyrolysis products detected in the DPMS analysis of both PADS and PTS indicate that the thermal degradation takes place mainly through a loss of carbon monoxide and carbonyl oxysulfide leading to the formation of cyclics. In the case of PADS, linear products with thioacid end groups were formed through hydrogen transfer reactions. In the case of PTS, almost equal proportions of linear products with phenyl end groups and cyclic products were formed. The mechanism of formation of degradation products has also been addressed.     

Identification of acrylate copolymers using pyrolysis and gas chromatography

A combination of pyrolysis and gas chromatography were used to investigate thermal degradation products formed from acrylic copolymers containing alkyl acrylate and methacrylate. The method provided an analytical tool for characterizing the chemical composition and structure of the degradation products. Thermal degradation of the synthesized copolymers was analyzed using isothermal (250 °C) pyrolysis–gas chromatography. The degradation process, and the nature and amount of pyrolysis products, provides relevant information about the thermal degradation of acrylic copolymers and the mechanism of pyrolysis. During pyrolysis, the formation of corresponding olefins, alcohols, acrylates and methacrylate was observed.     

Correlation of thermal degradation mechanisms: Polyacetylene and vinyl and vinylidene polymers

The thermal degradation of poly(vinyl bromide) (PVB), poly(vinyl chloride) (PVC), poly(vinyl alcohol) (PVA), poly(vinyl acetate) (PVAc), poly(vinyl fluoride) (PVF), poly(vinylidene chloride) (PVC₂), and poly(vinylidene fluoride) (PVF₂) has been studied by direct pyrolysis–mass spectrometry (DP-MS) and flash pyrolysis–gas chromatography–mass spectrometry techniques. Vinyl and vinylidene polymers exhibit two competitive thermal degradation processes: (1) HX elimination with formation of polyene sequences which undergo further moleculaar rearrangements, and (2) main-chain cleavage with formation of halogenated or oxigenated compounds. The overall thermal degradation process depends on the prevailing decomposition reaction in each polymer; therefore, different behaviors are observed. The thermal degradation of polyacetylene (PA) has also been studied and found important for the elucidation of the thermal decomposition mechanism of the title polymers.     

Ultrasonic Modification of Polymers. I. Degradations of Polystyrene in the Presence of Various Poly(alkyl Methacrylates)

Ultrasonic (70 W, 20 kHz) degradations of polystyrene (PS) have been carried out with various poly(alkyl methacrylates) (PRMA) for periods of 3 h at 27°C in toluene (2.0 to 5.0% solutions). The isolation of sequence copolymers thus prepared from their associated homopolymers was achieved by employing selective solvents (solvent for one homopolymer but a precipitant for the second homopolymer in the mixture). The recovered products were analyzed by gel permeation chromatography (GPC), infrared spectroscopy (IR), and viscometry. These analyses showed that when the substituents in PRMA were methyl, ethyl, isopropyl, n-butyl, isobutyl, or phenyl, sequence copolymers with segments from PS as well as from poly(alkyl methacrylate) were obtained. However, when the substituents on PRMA were hexyl, isodecyl, lauryl, hexadecyl, octadecyl or isobornyl there were no sequence copolymers formed. The decrease in the intrinsic viscosity of the recovered homopolymers and shifts of their GPC chromatograms toward the low molecular weight end suggest that on sonification PRMA samples having bulkier substituents do degrade and yield radicals which, however, do not recombine with those from polystyrene. Furthermore, ultrasonic degradation of polystyrene is found to be dependent on the chain stiffness of the poly(alkyl methacrylates).     

The thermal susceptibility of poly(chloroethyl methacrylates)

The non-oxidative thermal degradation kinetics and mechanism of poly(2-monochloro, 2, 2-dichloro and 2, 2, 2, -trichloroethyl methacrylates) were studied. The influence of the antioxidant IRGA-NOX 1010 on the thermal degradation of the monochloroethyl derivative was also investigated. Initial hydrolysis data on the major degradation products, the corresponding monomers, were obtained.     

Thermal degradation of organophosphorus flame-retardant poly(methyl methacrylate) nanocomposites containing nanoclay and carbon nanotubes

Filler nanoparticles pave the way for the development of novel halogen-free flame-retardant polymers. The aim of this study was to investigate the thermal degradability, and in particular, the thermal degradation mechanism of organophosphorus flame-retardant poly(methyl methacrylate) (PMMA) nanocomposites containing nanoclay (NC) and multi-walled carbon nanotubes (CNT). For this purpose, thermogravimetry and direct pyrolysis mass spectrometry analysis were utilized. The onset of degradation was delayed through increased maximum degradation temperature and suppressed mass loss corresponding to initial degradation stage with carbon nanotubes and nanoclays, respectively. Possibility of reactions of melamine and/or melamine derivatives and interactions between carbonyl groups of PMMA and phosphinic acid leading to thermally more stable products was increased owing to the barrier effect of filler nanoparticles. In the presence of NC better flame retarding characteristics was detected as anhydride formation, leading to charring being more effective.     

Thermal degradation of poly(alkyl acrylates). I. Preliminary investigations

A qualitative survey of the thermal degradation reactions which occur in poly(ethyl acrylate), poly(n-propyl acrylate), poly(isopropyl acrylate), poly(n-butyl acrylate) and poly(2-ethylhexyl acrylate) has been made by using three thermal analytical methods: thermogravimetric analysis (TGA), thermal volatilization analysis (TVA), and the dynamic molecular still (DMS), all combined with infrared and mass spectrometry. Degradation in poly(isopropyl acrylate), which is a secondary ester, becomes discernible at 260°C and proceeds in two stages. The other four polymers, which are all primary esters, are more stable. They degrade in a single-stage process starting at 300°C. The principal volatile products from the primary esters are carbon dioxide and the olefin and alcohol corresponding to the alkyl group. A roughly equivalent quantity of short-chain fragments is also formed. From poly(isopropyl acrylate), carbon dioxide and propylene are the only volatile products in the first phase of the reaction.     

Thermal degradation of poly(p-phenylene-graft-?-caprolactone) copolymer

The thermal degradation of poly(p-phenylene-graft-?-caprolactone) (PPP), synthesized by Suzuki polycondensation of poly(?-caprolactone) (PCL) with a central 2,5-dibromo-1,4-benzene on the chain with 1,4-phenylene-diboronic acid, has been studied via direct pyrolysis mass spectrometry. The thermal degradation occurred mainly in two steps. In the first step, decomposition of PCL chains occurred. A slight increase in thermal stability of PCL chains was noted. In the second stage of pyrolysis, the decomposition of the polyphenylene backbone takes place. The evolution of CL monomer or small CL segments left on the phenyl ring continued also in the temperature region where degradation of PPP backbone started.     

聚亚苯基苯并二噻唑与聚亚苯基苯并二噁唑的热分解

用高分辨裂解气相色谱 质谱（ＨＲＰｙＧＣ ＭＳ）研究了聚亚苯基苯并二噻唑、聚亚苯基苯并二唑的热分解行为,鉴定了相应裂解产物的组成、分布及其与高分子结构的关系,并用热重法（ＴＧ）测定了它们的热分解反应动力学参数,提出了其热分解反应机理     

Ultrasonic Solution Degradations of Poly(Alkyl Methacrylates)

Ultrasonic (70 W, 20 kHz) solution (2%) degradations of poly(alkyl methacrylates) have been carried out in toluene at 27°C and in tetrahydrofuran (THF) at -20°C. M_w and M_n of all polymers (before and after sonification) were computed from GPC. Irrespective of the alkyl substituent, M_w decreased rapidly at first and then slowly approached limiting values. All M_w/M_n ratios were in the vicinity of 1.5 at the limiting chain lengths. For identical M_n, the rate constants k were (4.2 ± 2.0) × 10^?6 min^?1 in toluene at 27°C and (5.4 ± 2.0) × 10^?6 min^?1 in THF at -20°C. For poly(isopropyl methacrylate) and poly(octadecyl methacrylate) with higher, but identical, M_n,0, k values were higher ((9.0 ± 1.0) × 10^?6 min^?1 at 27°C and (18.0 ± 1.5) × 10^?6 min^?1 at -20°C). This suggests that M_n,0 and not the bulk size of the alkyl substituents is the factor that determines the rate of degradation. Lowering of the temperature accelerates degradation due primarily to lower chain mobility of poly-(alkyl methacrylates) and enhanced cavitation. The average number of chain scissions ([(M_n)₀/(M_n)_t] - 1) calculated from component degradation data are much higher than those obtained with overall M_n,t values.     

Ester-Ester Exchange Reactions of Aliphatic Polyesters

The kinetics of ester-ester exchange reactions of poly(ethylene adipate) and poly(trimethylene adipate) at 312°C and in the absence of a solvent and catalysts has been reported previously. Independent investigations of the thermal degradation reactions of these polyesters under high vacuum have shown that pyrolysis already starts above 270°C. An ester-ester exchange mechanism via a reversible thermal degradation reaction is proposed.     

Utilization of 2-alkenoic acids for biosynthesis of medium-chain-length polyhydroxyalkanoates in metabolically engineered Escherichia coli to construct a novel chemical recycling system

This study describes the biosynthesis and thermal degradation of medium-chain-length polyhydroxyalkanoate (PHA), focusing on 2-alkenoic acids as a recyclable carbon source. Using metabolically engineered Escherichia coli, PHA consisting of 3-hydroxydecanoate (3HD) was synthesized from 2-decenoic acid. Solvent cast film of poly(3HD) [P(3HD)] was transparent and showed thermal property similar to that of polycaprolactone. In addition, the use of various 2-alkenoic acids (C6-C12) resulted in production of PHAs with over 95 mol% of the corresponding single monomer units. The pyrolysis product of P(3HD) was dominantly 2-decenoic acid used for the P(3HD) biosynthesis. This demonstrates the feasibility of PHA recycling via 2-alkenoic acids, which act as pyrolysis products and raw materials for PHA biosynthesis.     

New initiator system for the anionic polymerization of (meth)acrylates in toluene. IV. Random copolymerization of (meth)acrylates in toluene initiated by s-BuLi ligated by lithium silanolates

Copolymerization of binary mixtures of alkyl (meth)acrylates has been initiated in toluene by a mixed complex of lithium silanolate  (s-BuMe₂SiOLi) and s-BuLi (molar ratio > 21) formed in situ by reaction of s-BuLi with hexamethylcyclotrisiloxane (D₃). Fully acrylate and methacrylate copolymers, i.e., poly(methyl acrylate-co-n-butyl acrylate), poly(methyl methacrylate-co-ethyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate) of a rather narrow molecular weight distribution have been synthesized. However, copolymerization of alkyl acrylate and methyl methacrylate pairs has completely failed, leading to the selective formation of homopoly(acrylate). As result of the isotactic stereoregulation of the alkyl methacrylate polymerization by the s-BuLi/s-BuMe₂SiOLi initiator, highly isotactic random and block copolymers of (alkyl) methacrylates have been prepared and their thermal behavior analyzed. The structure of isotactic poly(ethyl methacrylate-co-methyl methacrylate) copolymers has been analyzed in more detail by Nuclear Magnetic Resonance (NMR). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2525–2535, 1999