Synthesis and magnetic properties of the complex oxide La<Subscript>1.5</Subscript>Sr<Subscript>1.5</Subscript>CuMnO<Subscript>6.67</Subscript>

A new oxide phase, La_1.5Sr_1.5CuMnO_6.67, related to the Ruddlesden-Popper homologous series A _{n + 1}B _n O_{3n + 1} (n = 2) was synthesized. The magnetic susceptibility of the obtained compound obeys the Curie-Weiss law above 114 K. At 14 K, a magnetic anomaly related to the transition to the spin-glass state was detected.     

Synthesis and magnetic properties of quasi-unidimensional oxide Sr<Subscript>6.3</Subscript>Rh<Subscript>2.35</Subscript>Mn<Subscript>2.35</Subscript>O<Subscript>15</Subscript>

Attempts of the synthesis in air of complex oxides Sr₃RhMnO_x and Sr₄Rh_1.5Mn_1.5O_x resulted in revealing formation of a new oxide phase Sr_6.3Rh_2.35Mn_2.35O₉ related to quasi-unidimensional family A_3n+3m A′ _n B_3m+n O_9m+6n at n = 1 and m = 1. Its structural characteristics and magnetic properties are studied. X-ray data of the obtained phase is indicated on the basis of trigonal cell (spatial group P321) with the parameters: a 9.6239(4) Å; c ₁ 4.1130(4) Å, c ₂ 2.4946(2) Å. Manganese and rhodium exist in the compound as the cations Mn⁴⁺, Rh³⁺ and Rh⁴⁺, as follows from the data of measuring of magnetic susceptibility in the range 2–300 K.     

BiFeO<Subscript>3</Subscript>-coated spinel LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> with improved electrochemical performance as cathode materials for lithium-ion batteries

Spinel LiNi_0.5Mn_1.5O₄ cathode material is a promising candidate for next-generation rechargeable lithium-ion batteries. In this work, BiFeO₃-coated LiNi_0.5Mn_1.5O₄ materials were prepared via a wet chemical method and the structure, morphology, and electrochemical performance of the materials were studied. The coating of BiFeO₃ has no significant impact on the crystal structure of LiNi_0.5Mn_1.5O₄. All BiFeO₃-coated LiNi_0.5Mn_1.5O₄ materials exhibit cubic spinel structure with space group of Fd3m. Thin BiFeO₃ layers were successfully coated on the surface of LiNi_0.5Mn_1.5O₄ particles. The coating of 1.0 wt% BiFeO₃ on the surface of LiNi_0.5Mn_1.5O₄ exhibits a considerable enhancement in specific capacity, cyclic stability, and rate performance. The initial discharge capacity of 118.5 mAh g^?1 is obtained for 1.0 wt% BiFeO₃-coated LiNi_0.5Mn_1.5O₄ with very high capacity retention of 89.11% at 0.1 C after 100 cycles. Meanwhile, 1.0 wt% BiFeO₃-coated LiNi_0.5Mn_1.5O₄ electrode shows excellent rate performance with discharge capacities of 117.5, 110.2, 85.8, and 74.8 mAh g^?1 at 1, 2, 5, and 10 C, respectively, which is higher than that of LiNi_0.5Mn_1.5O₄ (97.3, 90, 77.5, and 60.9 mAh g^?1, respectively). The surface coating of BiFeO₃ effectively decreases charge transfer resistance and inhibits side reactions between active materials and electrolyte and thus induces the improved electrochemical performance of LiNi_0.5Mn_1.5O₄ materials.     

Synthesis and study of the phosphate Cs<Subscript>2</Subscript>Mn<Subscript>0.5</Subscript>Zr<Subscript>1.5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The new phosphate Cs₂Mn_0.5Zr_1.5(PO₄)₃ was synthesized for the first time and characterized by X-ray diffraction. Its crystal structure was refined in space group P2₁3, Z = 4 at 25°C (a = 10.3163(1) Å, V = 1097.93(1) ų), by the Rietveld method using the powder X-ray diffraction data. The structure is built of an octahedral-tetrahedral framework {[Mn_0.5Zr_1.5(PO₄)₃]^2?}_3∞ with cesium atoms being located in large cavities. The hydrolytic stability of the powdered phosphate containing ¹³⁷Cs radionuclide was studied. The minimum achieved ¹³⁷Cs leaching rate was 4 × 10^?8 g/cm₂ day.     

Co-precipitation spray-drying synthesis and electrochemical performance of stabilized LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> cathode materials

In this paper, the LiNi_0.5Mn_1.5O₄ cathode materials of lithium-ion batteries are synthesized by a co-precipitation spray-drying and calcining process. The use of a spray-drying process to form particles, followed by a calcination treatment at the optimized temperature of 750 °C to produce spherical LiNi_0.5Mn_1.5O₄ particles with a cubic crystal structure, a specific surface area of 60.1 m² g^?1, a tap density of 1.15 g mL^?1, and a specific capacity of 132.9 mAh g^?1 at 0.1 C. The carbon nanofragment (CNF) additives, introduced into the spheres during the co-precipitation spray-drying period, greatly enhance the rate performance and cycling stability of LiNi_0.5Mn_1.5O₄. The sample with 1.0 wt.% CNF calcined at 750 °C exhibits a maximum capacity of 131.7 mAh g^?1 at 0.5 C and a capacity retention of 98.9% after 100 cycles. In addition, compared to the LiNi_0.5Mn_1.5O₄ material without CNF, the LiNi_0.5Mn_1.5O₄ with CNF demonstrates a high-rate capacity retention that increases from 69.1% to 95.2% after 100 cycles at 10 C, indicating an excellent rate capability. The usage of CNF and the synthetic method provide a promising choice for the synthesis of a stabilized LiNi_0.5Mn_1.5O₄ cathode material.

Open image in new window

Graphical Abstract Micro/nanostructured LiNi_0.5Mn_0.5O₄ cathode materials with enhanced electrochemical performances for high voltage lithium-ion batteries are synthesized by a co-precipitation spray-drying and calcining routine and using carbon nanofragments (CNFs) as additive.

     

High-Temperature X-Ray Diffraction Investigation of the Decomposition Process in Manganese-Gallium Spinel Mn<Subscript>1.5</Subscript>Ga<Subscript>1.5</Subscript>O<Subscript>4</Subscript>

The stability of spinel-type mixed Mn_1.5Ga_1.5O₄ oxide prepared in an inert medium (1000 °C, Ar) is studied by thermogravimetry and high-temperature X-ray diffraction in air in a wide temperature range 30–1000 °C. On heating, reversible decomposition processes of initial spinel are observed. From 30 °C to 600 °C oxygen atoms attach to the surface layer of initial Mn_1.5Ga_1.5O₄ spinel to form a new phase distinct from parent oxide by the oxygen stoichiometry (cation vacancies are formed). The product of decomposition is two oxides: Mn_1.5Ga_1.5O₄ and Mn_1.5–xGa_1.5–x[·]_xO₄. On the contrary, above 600 °C a loss of oxygen occurs, the concentration of cation vacancies decreases in Mn_1.5–xGa_1.5–x[·]_xO₄, and the reverse process of single phase oxide crystallization takes place. At 1000 °C the spinel phase forms again whose composition is similar to that of the initial parent phase Mn_1.5Ga_1.5O₄. On cooling the decomposition of this phase is again observed due to oxygen attachment.     

Mononuclear manganese(II) and manganese(III) complexes of N<Subscript>2</Subscript>O donors involving amine and phenolate ligands: absorption spectra,electrochemistry and crystal structure of [Mn(L<Subscript>3</Subscript>)<Subscript>2</Subscript>](ClO<Subscript>4</Subscript>)

A number of mononuclear manganese(II) and manganese(III) complexes have been synthesized from tridentate N₂O aminophenol ligands (HL₁–HL₅) formed by reduction of corresponding Schiff bases with NaBH₄. Three types of tridentate N₂O aminophenols have been prepared by reducing with NaBH₄which are (a) Schiff bases obtained by bromo salicylaldehyde reaction with N,N-dimethyl/N,N-diethyl ethylene diamine (HL₁, HL₂), (b) Schiff bases obtained by condensing salicylaldehyde/bromo salicylaldehyde and picolyl amine (HL₃, HL₄), (c) pyridine-2-aldehyde and 2-aminophenol (HL₅). All the manganese complexes have been prepared by direct addition of manganese perchlorate to the corresponding ligands and were characterized by the combination of i.r., u.v.–vis spectroscopy, magnetic moments and electrochemical studies. The u.v.–vis spectra of all of the manganese(III) complexes show two weak d–d transitions in the 630–520 nm region, which support a distorted octahedral geometry. The electron transfer properties of all of the manganese(III) complexes (1–4 and 6) exhibit mostly similar characteristics consisting two redox couples corresponding to the Mn^III → Mn^II reductions and Mn^III → Mn^IV oxidations. The electronic effect on the potential has also been studied by changing different substituents in the ligands. In all cases, an electron-donating group stabilizes the higher oxidation state and electron withdrawing group prefers the lower oxidation state. The cyclic voltammogram of [Mn^II(L₅)₂] shows an irreversible oxidation Mn^II → Mn^III at −0.88 V, followed by another quasi-reversible oxidation Mn^III → Mn^IV at +0.48 V. The manganese(III) complex (3) [Mn(L₃)₂]ClO₄has been characterized by X-ray crystallography.     

High-temperature X-ray study of the formation and delamination of manganese-alumina spinel Mn<Subscript>1.5</Subscript>Al<Subscript>1.5</Subscript>O<Subscript>4</Subscript>

The behavior of the manganese-alumina system with Mn:Al = 1:1 on heating in air and vacuum was studied. The starting samples were mixtures of β-Mn₃O₄, α-Mn₂O₃, and γ-Al₂O₃. On heating to 950°C in air, the samples were partially oxidized into α-Mn₂O₃, and corundum α-Al₂O₃ formed along with mixed manganese-alumina cubic spinel, whose composition was close to Mn₂AlO₄. In vacuum at 1200°C, the starting sample with a ratio of Mn:Al = 1:1 transformed into the manganese-alumina spinel Mn_1.5Al_1.5O₄, which retained its cubic structure after slow cooling in vacuum. When cooled in air, this solid solution delaminated, and a nanocrystalline Mn_2.8Al_0.2O₄ phase formed, whose structure was β-Mn₃O₄ type tetragonal spinel.     

Sn-doped Li<Subscript>1.2</Subscript>Mn<Subscript>0.54</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>O<Subscript>2</Subscript> cathode materials for lithium-ion batteries with enhanced electrochemical performance

Sn-doped Li-rich layered oxides of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ have been synthesized via a sol-gel method, and their microstructure and electrochemical performance have been studied. The addition of Sn⁴⁺ ions has no distinct influence on the crystal structure of the materials. After doped with an appropriate amount of Sn⁴⁺, the electrochemical performance of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ cathode materials is significantly enhanced. The optimal electrochemical performance is obtained at x = 0.01. The Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode delivers a high initial discharge capacity of 268.9 mAh g^?1 with an initial coulombic efficiency of 76.5% and a reversible capacity of 199.8 mAh g^?1 at 0.1 C with capacity retention of 75.2% after 100 cycles. In addition, the Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode exhibits the superior rate capability with discharge capacities of 239.8, 198.6, 164.4, 133.4, and 88.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively, which are much higher than those of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (196.2, 153.5, 117.5, 92.7, and 43.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively). The substitution of Sn⁴⁺ for Mn⁴⁺ enlarges the Li⁺ diffusion channels due to its larger ionic radius compared to Mn⁴⁺ and enhances the structural stability of Li-rich oxides, leading to the improved electrochemical performance in the Sn-doped Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode materials.     

Heat capacity and magnetic phase transition of two-dimensional metal-assembled complex (NEt<Subscript>4</Subscript>)[{Mn<Superscript>III</Superscript>(salen)}<Subscript>2</Subscript>Fe<Superscript>III</Superscript>(CN)<Subscript>6</Subscript>]

Summary Heat capacity measurements of the two-dimensional metal-assembled complex, (NEt₄)[{Mn^III(salen)}₂Fe^III(CN)₆] [Et=ethyl, salen= N,N’-ethylenebis(salicylideneaminato) dianion], were performed in the temperature range between 0.2 and 300 K by adiabatic calorimetry. A ferrimagnetic phase transition was observed at T_c1=7.51 K. Furthermore, another small magnetic phase transition appeared at T_c2=0.78 K. Above T_c1, a heat capacity tail arising from the short-range ordering of the spins characteristic of two-dimensional magnets was found. The magnetic enthalpy and entropy were evaluated to be ΔH=291 J mol^-1 and ΔS=27.4 J K^-1 mol^-1, respectively. The experimental magnetic entropy agrees roughly with ΔS=Rln(5·5·2) (=32.5 J K^-1 mol^-1; R being the gas constant), which is expected for the metal complex with two Mn(III) ions in high-spin state (spin quantum number S=2) and one Fe(III) ion in low-spin state (S=1/2). The heat capacity tail above T_c1 became small by grinding and pressing the crystal. This mechanochemical effect would be attributed to the increase of lattice defects and imperfections in the crystal lattice, leading not only to formation of the crystal with a different magnetic phase transition temperature but also to decrease of the magnetic heat capacity and thus the magnetic enthalpy and entropy.     

Analysis of the temperature dependence of the high-frequency EMR spectra of Mn ions in the lithium-ion battery material LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>

This paper deals with the analysis of the temperature dependence of high-frequency EMR (HF-EMR) spectra due to Mn³⁺ and Mn⁴⁺ ions in the lithium manganese spinel LiMn₂O₄. A range of powder samples obtained by the sol-gel method with calcinations in several temperature ranges were prepared for this study. Based on the initial characterization carried out by a number of techniques, the physicochemical and structural properties of the samples were earlier determined. Independently, temperature magnetization and HF-EMR measurements were carried out. The EMR spectra vary strongly between samples, indicating possible structural or chemical changes. Quantitative analysis of the temperature dependence of the HF-EMR spectra due to Mn³⁺ and Mn⁴⁺ ions in LiMn₂O₄ is presented in this paper. The spectral analysis concerns the line shape, linewidth, intensity and g-factors. Fittings using the Lorentzian spectral shape and, to a certain extent, the Gaussian spectral shape have been carried out in order to parameterize the temperature dependence of the HF-EMR spectra. This parameterization of the HF-EMR experimental data enables a deeper characterization of the samples. Subsequently, a better insight into the role of the Mn³⁺ and Mn⁴⁺ ions in accounting for the characteristics most suitable for application of LiMn₂O₄ as a cathode material may be gained.     

Improvement of the electrochemical properties of a LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> cathode material formed by a new solid-state synthesis method

In order to avoid the shortcomings of large particle size and poor uniformity of material synthesized by the traditional solid-state method, this paper utilizes a simple improvement of calcination process (i.e., calcination–milling–recalcination) based on the traditional solid-state synthesis to successfully prepare a large number of well-distributed, micrometer-sized, spherical secondary LiNi_0.5Mn_1.5O₄ particles. Each particle is composed of nano- and/or sub-micrometer-sized grains. Results of the electrochemical performance tests show that the material exhibits a remarkable cycle performance and rate capability compared with that obtained from traditional synthesis method; the spherical LiNi_0.5Mn_1.5O₄ particles can deliver a large capacity of 135.8 mAh g^?1 at a 1 C discharge rate with a high retention of 77 % after 741 cycles and a good capacity of 105.9 mAh g^?1 at 10 C. Cyclic voltammetry measurements confirm that the significantly improved electrochemical properties are due to enhanced electronic conductivity and lithium-ion diffusion coefficient resulting from the optimized morphology and particle size. This improved method is more suitable for mass production.     

Low temperature thermodynamic properties of Gd<Subscript>2</Subscript>SrCo<Subscript>2</Subscript>O<Subscript>7</Subscript>

Summary Thermodynamic properties of a layered perovskite oxide Gd₂SrCo₂O₇ have been studied. Powder X-ray diffraction, electric resistivity, magnetic susceptibility and heat capacity measurements were carried out. The crystal structure was determined as I4/mmm. The temperature dependence of the magnetic susceptibility was fitted to the Curie-Weiss behavior with antiferromagnetic interaction. Spin state of Co³⁺ ion was derived to be intermediate spin state configuration (t_2g⁵e_g¹). The spin ordering was observed as a broad anomaly in the heat capacity curve with a peak at 2 K. The measured entropy was 35.47 J K^-1mol^-1, which was 65% of expected value. Thus the spin ordering should not be completed at the lowest temperature 0.2 K covered in the present experiments and/or some short range ordering remains at higher temperatures.     

Transition metal salts of H<Subscript>4</Subscript>PMo<Subscript>11</Subscript>VO<Subscript>40</Subscript> for efficient H<Subscript>2</Subscript>S removal in the liquid redox process

Several transition metal (Cu²⁺, Fe³⁺, Zn²⁺, Mn⁴⁺, and Cr⁶⁺) salts of H₄PMo₁₁VO₄₀ were prepared and their solutions were used initially for H₂S removal in the liquid redox process. H₂S removal tests were performed by dynamic absorption experiments. Among these polyoxometalates, that with the Cu²⁺ cation was found to have pronounced H₂S removal performance with the removal efficiency of up to 98%. The relevant oxidative desulfurization mechanism and the role of Cu²⁺ were studied.     

Preparation and characterization of high specific surface area Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> from electrolytic manganese residue

Mn₃O₄ powders have been produced from Electrolytic Manganese Residue (EMR). After leaching of EMR in sulfuric acid, MnSO₄ solution containing various ions was obtained. Purifying the solution obtained and then adding aqueous alkali to the purified MnSO₄ solution, Mn(OH)₂ was prepared. Two methods were employed to produce Mn₃O₄. One way was oxidation of Mn(OH)₂ in aqueous phase under atmosphere pressure to obtain Mn₃O₄. The other way was roasting Mn(OH)₂ precursors in the range of 500°C to 700°C. The prepared samples were investigated by using several techniques including X-ray powder diffraction (XRD), Fourier Transformation Infra-Red (FTIR) spectra, and Brunauer-Emmett-Teller (BET) specific surface area instrument. Particle distribution and magnetic measurements were carried out on laser particle size analyzer, vibrating sample magnetometer (VSM). Through XRD, FTIR and determination of total Mn content (TMC), the products prepared were confirmed to be a single phase Mn₃O₄. BET specific surface areas can reach to 32 m² g⁻¹. The results indicated that products synthesized by aqueous solution oxidation method had higher specific surface areas and smaller particle size than those prepared by means of roasting. However the products prepared using the above two methods showed no obvious differences in magnetic property.      

Chemical bonding and electronic structure of LaMnO<Subscript>3</Subscript> and La<Subscript>0.75</Subscript>MnO<Subscript>3</Subscript> orthorhombic crystals

The electronic structure of the LaMnO₃ orthorhombic crystal of a stoichiometric composition and of La_0.75MnO₃ crystals with a La vacancy in the unit cell is calculated in the LSDA+U approximation of density functional theory. The calculations showed that LaMnO₃ is an insulator with a forbidden gap of 0.5 eV and with antiferromagnetic ordering of magnetic moments. The magnetic moment on the manganese ions is 3.78 BM. The La atom has ionic bonds in the lattice, while the bond between oxygen and manganese is covalent. After lanthanum has been removed, geometry optimization of the unit cell leads to La_0.75MnO₃ stable structures. In one of the structures, which is lower in energy, the states of manganese may be attributed to Mn⁴⁺ ions. In both structures with removed lanthanum, the oxygen ions have reduced effective charge, so that one can speak about O^? ions appearing along with O^2? in the structure. The oxygen, as well as lanthanum and manganese, ions are nonequivalent in these structures; their nonequivalence is primarily reflected by the local densities of states. This leads to charge and magnetic nonequivalence of ions. In La_0.75MnO₃ crystals, the degree of bond covalence between manganese and oxygen decreases.     

The influence of Li sources on physical and electrochemical properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> cathode materials for lithium-ion batteries

LiNi_0.5Mn_1.5O₄ cathode materials were successfully prepared by sol–gel method with two different Li sources. The effect of both lithium acetate and lithium hydroxide on physical and electrochemical performances of LiNi_0.5Mn_1.5O₄ was investigated by scanning electron microscopy, Fourier transform infrared, X-ray diffraction, and electrochemical method. The structure of both samples is confirmed as typical cubic spinel with Fd3m space group, whichever lithium salt is adopted. The grain size of LiNi_0.5Mn_1.5O₄ powder and its electrochemical behaviors are strongly affected by Li sources. For the samples prepared with lithium acetate, more spinel nucleation should form during the precalcination process, which was stimulated by the heat released from the combustion of extra organic acetate group. Therefore, the particle size of the obtained powder presents smaller average and wider distribution, which facilitates the initial discharge capacity and deteriorates the cycling performance. More seriously, there exists cation replacement of Li sites by transition metal elements, which causes channel block for Li ion transference and deteriorates the rate capability. The compound obtained with lithium hydroxide exhibits better electrochemical responses in terms of both cycling and rate properties due to higher crystallinity, moderate particle size, narrow size distribution and lower transition cation substitute content.     

Effects of Mg,Al Co-doping into Mn site on electrochemical performance of LiNi<Subscript>0.5</Subscript>Co<Subscript>0.2</Subscript>Mn<Subscript>0.3</Subscript>O<Subscript>2</Subscript>

In order to study the influence of multiple ions doping into single-site on the structure and electrochemical properties of Ni-rich layered-structure cathode material LiNi_0.5Co_0.2Mn_0.3O₂, the coprecipitation of hydroxides was applied to synthesize Mg, Al co-doped cathode material LiNi_0.5Co_0.2Mn_0.3–x Mg_1/2x Al_1/2x O₂ (x = 0.00, 0.01, 0.02, 0.04) in this paper. Morphology and structure, kinetic parameter, impedance and electrochemical performance of the material were respectively characterized by SEM, XRD, CV, EIS and galvanostatic charge/discharge test. The results of comprehensive analysis showed that the properties of material were improved obviously when the amount of doping was 0.02. At this amount of doping, the corresponding material has smaller cation mixing, higher hexagonal ordering of layered-structure, larger Li⁺ ion diffusion coefficients which are 2.444 × 10^–10 and 4.186 × 10^–10 cm² s^–1 for Li+ intercalation and deintercalation respectively, smaller impedance which is 33.93 Ω, higher specific capacity of first-discharge which is 168.01 mA h g^–1 and higher capacity retention rate which is up to 95.06% after 20 cycles at 0.5 C (100 mA g^–1).     

Antiferromagnetic coupling in [Mn<Subscript>12</Subscript>O<Subscript>12</Subscript>(O<Subscript>2</Subscript>CMe)<Subscript>6</Subscript>(<Emphasis Type="Italic">p</Emphasis>-CO<Subscript>2</Subscript>-phenyl nitronyl

The synthesis of [Mn₁₂O₁₂(O₂CMe)₆(p-CO₂-phenyl nitronyl nitroxide)₁₀(H₂O)₄]· 4H₂O, (1), by direct replacement of some of the acetate groups in [Mn₁₂O₁₂(O₂CMe)₁₆(H₂O)₄] · 4H₂O · 2MeCO₂H, (2), with the organic radical p-HO₂C-phenyl nitronyl nitroxide, (3), is reported. E.p.r. spectra show exchange narrowing in (1) due to coupling between the manganese ions and radicals. The isotropic hyperfine splitting constant from the manganese ions is a = 96 Oe at 5.5K. The magnetic susceptibility indicates antiferromagnetic exchange interactions between the manganese ions and the radicals with the Weiss constant = -25 K. The spin was determined to be S = 6 from magnetization data in the 2--30 K temperature range at 50 kOe, suggesting a mixture of ground state with excited states.     

Electrochemical properties of nano-crystalline LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> synthesized by polymer-pyrolysis method

LiNi_0.5Mn_1.5O₄ powders were prepared through polymer-pyrolysis method. XRD and TEM analysis indicated that the pure spinel structure was formed at around 450 °C due to the very homogeneous intermixing of cations at the atomic scale in the starting precursor in this method, while the well-defined octahedral crystals appeared at a relatively high calcination temperature of 900 °C with a uniform particle size of about 100 nm. When cycled between 3.5 and 4.9 V at a current density of 50 mA/g, the as prepared LiNi_0.5Mn_1.5O₄ delivered an initial discharge capacity of 112.9 mAh/g and demonstrated an excellent cyclability with 97.3% capacity retentive after 50 cycles.