Methacrylate modified clays and their polystyrene and poly(methyl methacrylate) nanocomposites

Two methacrylate‐modified clays have been prepared and used to produce nanocomposites of polystyrene and poly(methyl methacrylate) by in situ polymerization. These nanocomposites have been characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), cone calorimetry and the evaluation of mechanical properties. When the clay contains only a single methacrylate unit, the styrene system is exfoliated but methacrylate is intercalated. When two methacrylate units are present on the cation of the clay, both systems are exfoliated. TGA data show that the thermal stability of all the nanocomposites is improved, as expected. The relationships between the fire properties and nanostructure of the nanocomposites are complicated, as shown by cone calorimetry. The conclusions that one may reach using cone calorimetry do not completely agree with those from XRD and TEM. The evaluation of mechanical properties shows an increase in Young's modulus for all nanocomposites along with a decrease in elongation; tensile strength is decreased for methacrylate nanocomposites but increased for styrenics systems. Copyright © 2004 John Wiley & Sons, Ltd.     

Copolymerization of 2-Hydroxyethyl Methacrylate with Alkyl Methacrylates. Part IV. Mechanical Properties and Biocompatibility

Mechanical properties of copolymers of 2-hydroxyethyl methacrylate with methyl methacrylate, ethyl methacrylate, and n-butyl methacrylate have been investigated using an Instron tensile tester. It was observed that the overall mechanical properties decrease as the ester alkyl group of alkyl methacrylate becomes bulkier. Biocompatibility of the copolymers was also investigated by implanting them subcutaneously in rats.     

Effect of LiClO4 Salt on Dielectric Properties of Acrylonitrile-Methyl Methacrylate and Acrylonitrile-Isobutyl Methacrylate Copolymers

Poly(acrylonitrile-co-isobutyl methacrylate), PAN-co-PIBMA, and poly(acrylonitrile-co-methyl methacrylate), PAN-co-MMA copolymers are synthesized by emulsion polymerization. The structural characterization is done by FTIR and ¹H-NMR spectroscopy and thermal analyses are performed by thermogravimetric analysis (TGA). After various amounts of LiClO₄ salt loading into copolymer films, the dielectric properties of these films at different temperatures and frequencies are determined. The effects of different methacrylate groups and salt content on the dielectric properties of copolymers are investigated. It is found that the dielectric constant increases systematically with increasing MMA and IBMA content in the copolymer. The samples with higher salt content show higher ac-conductivities.     

An investigation of the hydrophobic property stability of grafted polymeric coatings on a cellulose material surface

Modification of cotton fabric surface by random or block copolymers of glycidyl methacrylate and lauryl methacrylate is studied. It is shown that a cotton fabric surface modified in such a way takes on superhydrophobic properties and differs in stability under long-term contact with aqueous media.     

Polymerization of adsorbed monolayers. III. Preliminary structure studies in dilute solution of the insertion polymers

Insertion poly(methyl acrylate) and poly(methyl methacrylate) were prepared from monomers adsorbed in monolayers on the surface of montmorillonite clay, both in the presence and in the absence of bifunctional crosslinkers (ethylene glycol dimethacrylate and tetramethylene glycol dimethacrylate). The insertion poly(methyl acrylate) and the crosslinked insertion poly(methyl methacrylate) and dilute-solution properties quite different from conventional polymers of these monomers, the differences including high light-scattering molecular weights combined with low viscosities, low values of the second virial coefficient, unusually large variations of the Huggins' constant k′ with the time-temperature history of the solutions, and low sedimentation velocities. These properties suggest that the insertion polymers have compact structures and are consistent with the postulate of sheetlike macromolecules. The dilute-solution properties of insertion poly(methyl methacrylate) made without crosslinker, unlike those of similarly prepared poly(methyl acrylate), were similar to those of conventional poly(methyl methacrylate). This difference in behavior is attributed to the different tendencies of the two monomers to undergo branching or crosslinking during radical polymerization.     

Thermodynamic properties of three-dimensional radical polymerization of dimethacrylates and their relation to the structure and properties of network polymers

For the polymerization of dimethacrylates, thermodynamic properties related to effect of the formed network polymer on the reaction between pendant methacrylate groups and free radicals have been studied. The polymer matrix creates steric hindrances for this reaction and impedes the shrinkage process accompanying the opening of С=С bonds. As a result, internal stresses develop in the polymer, the heat of polymerization of methacrylate groups decreases compared with the polymerization of methyl methacrylate, and the full conversion of double bonds is prevented. The relaxation of internal stresses and of excess free volume leads to the spontaneous cracking of network polymers and causes formation of regular adhesive-shrinkage patterns. The process of superslow relaxation of internal stresses in polymer films has been ascertained, and the mechanochemical model of this process has been advanced. The effect of internal stresses on the physicomechanical properties of polydimethacrylates has been discussed.     

Photoinitiated copolymerization of acetonyl methacrylate

Synthesis of two methacrylate monomers derivatives of carbonyl compounds: vanillin and acetone are presented. The obtained acetonyl methacrylate was used for copolymerization with methyl methacrylate. Copolymerizations were carried out in the presence of commercially available photoinitiator Irgacure 651. Thermal and mechanical properties of the copolymers with different concentration of acetonyl methacrylate were studied.     

Piezoelectric polymer films. II. Piezoelectric and pyroelectric evaluation

The concept of piezoelectric and pyroelectric effects in amorphous polymers is presented, with experimental results, details on sample preparation, and activity evaluation. Most evaluations were performed on 25–30 mol% tributyltin methacrylate/methyl methacrylate copolymers, which possessed good piezoelectric activity, antifouling properties, and paint-formulation characteristics. Solvent-induced orientation effects that lead to piezoelectric activity in amorphous, unpoled, polymers are also described.     

核壳型含氟丙烯酸酯共聚物的合成及性能

采用饥饿态半连续种子乳液聚合方法, 在十二烷基硫酸钠(SDS)/辛基苯基聚氧乙烯醚(TX-10)复合乳化剂的作用下, 分别选用甲基丙烯酸三氟乙酯(TFEM)、甲基丙烯酸六氟正丁酯(HFBM)和甲基丙烯酸十二氟庚酯(DFHM)为含氟单体, 合成以丙烯酸正丁酯(BA)、甲基丙烯酸甲酯(MMA)和含氟单体为原料的核壳型结构含氟丙烯酸酯共聚物乳液. FTIR, 1H NMR, TEM和DSC分析结果显示, 获得了BA/MMA/含氟单体的共聚物乳液, 且乳液具有明显的核壳结构. DSC, TGA和SEM-EDX的分析显示, 核壳型结构的共聚物具有优异的热力学稳定性能和成膜性能; 长侧链或短侧链含氟单体对共聚物的热稳定性影响不明显, 但侧链较长的含氟单体所获得的聚合物在成膜过程中更易向表面迁移, 更能体现含氟聚合物的优点.     

Methacrylated dendrimers in thiol‐methacrylate networks and the effect of conversion on the thermoset properties

A series of well‐defined methacrylate‐functionalized polyester dendrimers based on 2,2‐bis(methylol)propionic acid (bis‐MPA) has been synthesized divergently. The thermal properties and conversion of the methacrylate functional dendrimers are investigated along with the structure‐property relationship of networks composed of the methacrylate dendrimers and two commercially available trifunctional thiols, trimethylolpropane tri(3‐mercaptopropanoate) (TRIS) and ethoxylated trimethylolpropane tri(3‐mercaptopropanoate) (ETTMP). The thiol‐methacrylate reactions were conducted at room temperature, under ambient conditions, and triggered by UV light in the presence of a photoinitiator. Crosslinked films were obtained and characterized with respect to conversion (FT‐Raman) and thermal (DSC and TGA) properties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5815–5826, 2009     

Highly enhanced electrical and mechanical properties of methyl methacrylate modified natural rubber filled with multiwalled carbon nanotubes

Developing conductive networks in a polymer matrix with a low percolation threshold and excellent mechanical properties is desired for soft electronics applications. In this work, natural rubber (NR) functionalized with poly(methyl methacrylate) (PMMA) was prepared for strong interfacial interactions with multiwalled carbon nanotubes (MWCNT), resulting in excellent performance of the natural rubber nanocomposites. The MWCNT and methyl methacrylate functional groups gave good filler dispersion, conductivity and tensile properties. The filler network in the matrix was studied with microscopy and from its non-linear viscoelasticity. The Maier-Göritze approach revealed that MWCNT network formation was favored in the NR functionalized with PMMA, with reduced electrical and mechanical percolation thresholds. The obvious improvement in physical performance of MWCNT/methyl methacrylate functionalized natural rubber nanocomposites was caused by interfacial interactions and reduced filler agglomeration in the NR matrix. The modification of NR with poly(methyl methacrylate) and MWCNT filler was demonstrated as an effective pathway to enhance the mechanical and electrical properties of natural rubber nanocomposites.     

Intensification of Preparation of Modified Polycaproamide Fiber

A procedure was developed for graft polymerization of dimethylaminoethyl methacrylate onto polycaproamide using a redox system whose components are added to the reaction mixture sequentially. A scheme of radical graft polymerization of dimethylaminoethyl methacrylate onto polycaproamide was suggested. The properties of the copolymers were studied. The materials based on modified polycaproamide show promise as chemisorbents.     

蓖麻油—甲基丙烯酸甲酯AB交联聚合物的研究

将蓖麻油与顺丁烯二酸酐反应,合成端乙烯基蓖麻油,再与甲基丙烯酸甲酯共聚,制得了组成不同的一系列AB交联聚合物,研究了它们的动态性能、力学性能和形态结构与组成的关系.     

Mechanism of generation of photoelastic birefringence in methacrylate polymers for optical devices

We clarified the birefringence properties of poly(methyl methacrylate), poly(ethyl methacrylate), poly(isobutyl methacrylate), poly(cyclohexyl methacrylate), poly(isopropyl methacrylate), and poly(tert‐butyl methacrylate). We demonstrated that the conformational change in polymer molecules that causes orientational birefringence differs from that causing photoelastic birefringence. Orientational birefringence depends mainly on the orientation of the main chains of the methacrylate polymers above T_g. On the other hand, photoelastic birefringence in elastic deformation below T_g depends mainly on the orientation of the side chains while the main chains are scarcely oriented. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 2029–2037, 2010     

Monolayer properties of mixtures of poly(n-stearyl methacrylate), poly(n-lauryl methacrylate), and their corresponding copolymers

The monolayer properties of poly(n-stearyl methacrylate), poly(n-lauryl methacrylate), and their mixtures at various ratios of the two polymers have been studied from the measurements of their surface pressure–area isotherms at air–water interface. The monolayer properties of their mixtures have been compared with those of their corresponding copolymers. The results show that the isotherms of the mixed monolayers have two break points at higher pressures than that of poly(n-lauryl methacrylate). This suggests that the mixtures may form more stable films that consist of separate phases of the two homopolymers, although each phase may contain a small amount of the other. The isotherms of the copolymer monolayers indicate a phase transition from liquid condensed to solid film between 50 segment mole % and 70% poly(n-stearyl methacrylate). The monclayer of these copolymers has properties that differ from those of the corresponding mixtures of two pure homopolymers and is more compatible than the mixtures of pure homopolymers.     

Gas chromatographic properties of methacrylate polymers modified by silver nanoparticles

Russian Chemical Bulletin - The gas chromatographic properties of the porous methacrylate polymers, copolymers of 2,3-epoxypropyl methacrylate (2,3-EPMA) and ethylenedimethacrylate (EDMA), modified...     

Fullerene-containing branched polymethacrylates and polymer networks: Synthesis,structure, and properties

Branched poly(methyl methacrylates) containing covalently and noncovalently attached fullerene C₆₀ are synthesized and characterized by IR and UV spectroscopy. The basic physicochemical characteristics of the branched poly(methyl methacrylate) comprising covalently attached fullerene and the non-functionalized branched polymer of the same composition are compared. The effect of fullerene-containing branched poly(methyl methacrylates) on the kinetics of the crosslinking radical polymerization of 1,6-hexanediol dimethacrylate and on the structural-physical (mechanical, thermomechanical, and diffusion-sorption) properties of the resulting polymers is examined. The role of fullerene attached to the branched poly(methyl methacrylate) as an inhibitor of the crosslinking radical polymerization of dimethacrylate and as a modifier of the structure and properties of the polymers is ascertained.     

Grafting copolymerization of vinyl monomers on polyimide macroinitiators by the method of atom transfer radical polymerization

Graft copolymers with the main polyimide chain and side chains of poly(n-butyl acrylate), poly(tert-butyl acrylate), poly(methyl methacrylate), poly(tert-butyl methacrylate), polystyrene, and polystyrene-block-poly(methyl methacrylate) were synthesized by atom transfer radical polymerization on the multicenter polyimide macroinitiators in the presence of the halide complexes of univalent copper with nitrogen-containing ligands. Polymerization of metha-crylates is most efficiently developed on the polyimide macroinitiators. The obtained graft copolymers initiate the secondary polymerization (“post-polymerization”) of methyl methacrylate. The conditions of detachment of side chains of graft polymethacrylates that do not involve the ester groups of their monomeric units were found. The molecular mass characteristics of the graft copolymers and isolated polymers, being the detached side chains of the copolymers, were determined. The detached side chains of different chemical structures have low values of the polydispersity index. The procedure developed was used for the preparation of new graft polyimides with side chains of poly-4-nitro-4′-[N-methylacryloyloxyethyl-N′-ethyl]amino-azobenzene that cause the nonlinear optical properties and with the side chains of poly(N,N-dimethylaminoethyl methacrylate) that cause the thermosensitive properties of the copolymers.     

Vibration damping materials based on interpenetrating polymer networks of carboxylated nitrile rubber and poly(methyl methacrylate)

Interpenetrating polymer networks (IPNs) based on carboxylated nitrile rubber (XNBR) and poly(methyl methacrylate)s were synthesized. Crosslinked XNBR was swollen in methyl methacrylate containing benzoyl peroxide as initiator and tetraethylene glycol dimethacrylate as crosslinking agent. The compositions of the IPNs were varied by changing the swelling time of the rubber in the methacrylate monomer. The dynamic mechanical properties of the IPNs were studied. The dynamic mechanical properties in the range 1–10⁵ Hz were obtained by the time‐temperature superposition of the data under multifrequency mode, which indicated high tan δ with good storage modulus in the entire frequency range. This indicates the suitability of these IPNs as vibration and acoustic dampers. Copyright © 2002 John Wiley & Sons, Ltd.     

长余辉光致发光聚甲基丙烯酸酯共聚物球粒的合成

过去仅用ＺｎＳ和ＣａＳ等的长余辉发光材料(发光时间只有十几分钟 )。加入少量Ｃｏ、Ｐｍ物质 ,发光时间延长 ,亮度提高 ,但Ｃｏ、Ｐｍ具有放射性。以铝酸盐为基料制备的发光材料发光时间 ,发光强度明显提高。铝酸盐掺杂少量稀土元素Ｄｙ、Ｅｕ ,制得发绿光的高亮度光致发光材料、余辉时间长达 1 5ｈ以上 ,而且该材料的使用寿命长 ,高达 1 0年以上[1 ] 。本文研制的发光球粒以甲基丙烯酸甲酯和丙烯酸乙酯为单体 ,少量的发光粉为关键组份 ,采用悬浮聚合方法合成得到。聚甲基丙烯酸甲酯(ＰＭＭＡ)具有优良的透明度、光泽度和强度 ,而且具有良…