梯度结构胶体光子晶体的制备及光子禁带调节

以改进的对流自组装方法制备层数可控的胶体光子晶体, 并通过各向同性氧等离子体(O₂ Plasma)刻蚀构造出梯度结构, 进一步通过金(Au)及无定形硅(Si)的可控沉积调节梯度结构胶体光子晶体的光子禁带, 并将该梯度结构用于罗丹明B的荧光发射增强.     

Automated preparation method for colloidal crystal arrays of monodisperse and binary colloid mixtures by contact printing with a pintool plotter

Photonic crystals and photonic band gap materials with periodic variation of the dielectric constant in the submicrometer range exhibit unique optical properties such as opalescence, optical stop bands, and photonic band gaps. As such, they represent attractive materials for the active elements in sensor arrays. Colloidal crystals, which are 3D gratings leading to Bragg diffraction, are one potential precursor of such optical materials. They have gained particular interest in many technological areas as a result of their specific properties and ease of fabrication. Although basic techniques for the preparation of regular patterns of colloidal crystals on structured substrates by self-assembly of mesoscopic particles are known, the efficient fabrication of colloidal crystal arrays by simple contact printing has not yet been reported. In this article, we present a spotting technique used to produce a microarray comprising up to 9600 single addressable sensor fields of colloidal crystal structures with dimensions down to 100 mum on a microfabricated substrate in different formats. Both monodisperse colloidal crystals and binary colloidal crystal systems were prepared by contact printing of polystyrene particles in aqueous suspension. The array morphology was characterized by optical light microscopy and scanning electron microscopy, which revealed regularly ordered crystalline structures for both systems. In the case of binary crystals, the influence of the concentration ratio of the large and small particles in the printing suspension on the obtained crystal structure was investigated. The optical properties of the colloidal crystal arrays were characterized by reflection spectroscopy. To examine the stop bands of the colloidal crystal arrays in a high-throughput fashion, an optical setup based on a CCD camera was realized that allowed the simultaneous readout of all of the reflection spectra of several thousand sensor fields per array in parallel. In agreement with Bragg's relation, the investigated arrays exhibited strong opalescence and stop bands in the expected wavelength range, confirming the successful formation of highly ordered colloidal crystals. Furthermore, a narrow distribution of wavelength-dependent stop bands across the sensor array was achieved, demonstrating the capability of producing highly reproducible crystal spots by the contact printing method with a pintool plotter.     

流动控制沉积法制备PMMA叠层光子晶体薄膜及其光学性能研究

采用流动控制沉积法, 通过调控泵速和聚甲基丙烯酸甲酯(PMMA)胶体微球溶液的浓度, 制备出微球排列高度有序且薄膜紧密附着于基底的高质量光子晶体薄膜. 获得了制备高质量PMMA光子晶体薄膜的组装条件范围, 发现在该条件范围内, 当泵速或胶体微球溶液浓度一定时, PMMA光子晶体薄膜的厚度随胶体微球溶液浓度的增加或泵速的降低而增加. 研究了组装条件对PMMA光子晶体薄膜光学性能的影响, 发现光子禁带位置随光子晶体薄膜厚度增加或减少而红移或蓝移. 在此基础上, 控制组装条件得到了不同尺寸微球堆叠而成的叠层光子晶体薄膜, 并研究了其光学性能的变化规律. 结果显示, 叠层光子晶体薄膜的光子禁带峰为各层叠层光子晶体禁带峰的简单叠加, 且峰强度受光入射角方向影响.     

Microwave-assisted self-organization of colloidal particles in confining aqueous droplets

Monodisperse aqueous emulsion droplets encapsulating colloidal particles were produced in the oil phase, and controlled microwave irradiation of the aqueous drop phase created spherical colloidal crystals by so-called evaporation-induced self-organization of the colloidal particles. Unlike usual colloidal crystals, colloidal crystals in spherical symmetry (or photonic balls) possessed photonic band gaps for the normal incident light independent of the position all over the spherical surface. While the consolidation of colloidal particles in emulsion droplets in an oven took several hours, the present microwave-assisted evaporation could reduce the time for complete evaporation to a few tens of minutes. Under the microwave irradiation, the aqueous phase in emulsions was superheated selectively and the evaporation rate of water could be controlled easily by adjusting the microwave intensity. The result showed that the packing quality of colloidal crystals obtained by the microwave-assisted self-organization was good enough to show photonic band gap characteristics. The reflectance of our photonic balls responded precisely to any change in physical properties including the size of colloidal particles, refractive index mismatch, and angle of the incident beam. In particular, for polymeric particles, the photonic band gap could be tuned by the intensity of microwave irradiation, and the reflection color was red-shifted with stronger microwave irradiation. Finally, for better photonic band gap properties, inverted photonic balls were prepared by using the spherical colloidal crystals as sacrificial templates.     

基于胆甾相液晶的可调制光子晶体

将胆甾相液晶填充进胶体晶体内部空隙, 通过胆甾相液晶与胶体晶体的耦合, 构建了一种新型可调制液晶光子晶体. 填充于胶体晶体内部的胆甾相液晶织构呈现典型的手性近晶相(S)特征. 由于胆甾相液晶具有特定的选择性反射, 当胶体晶体的带隙处于胆甾相液晶的反射波长范围之内, 则随着温度的改变, 胶体晶体的带隙与胆甾相液晶的带隙同时发生蓝移. 在一定温度条件下, 胆甾相液晶的带隙将与胶体晶体的带隙发生耦合, 实现了光子晶体带隙在单峰与双峰之间的可逆切换.     

金属Al薄膜基微池强制沉积胶体光子晶体的制备

强制沉积法是一种利用自组装原理快速沉积胶体晶体有序阵列的模板方法. 我们利用微机械刻划法加工金属Al薄膜, Al膜厚控制微粒粒径和聚醚砜膜厚控制层数, 成功地制备了用于强制沉积光子晶体的微池装置. 为了检验该微池装置的有效性, 我们分别测试了不同粒径(224, 245和283 nm)单分散聚苯乙烯微球的沉积效果, 并且对其中一种微球(283 nm)进行了不同温度的烘干处理, 检验了烘干温度对该样品表面形貌和光子带隙中心波长的影响. 实验结果表明, 该光子晶体呈面心立方结构, 内部晶格完整, 缺陷较少, 带隙中心波长的实验值与计算值符合得较好. 此外, 烘干处理可以使构成光子晶体的微球发生微观变化, 并导致光子带隙中心波长的蓝移.     

Direct-write fabrication of colloidal photonic crystal microarrays by ink-jet printing

An array of the colloidal photonic crystals was directly fabricated using an ink-jet printing. The colloidal ink droplets containing the monodispersed polystyrene latex particles were selectively deposited on a hydrophobic surface. Solvent evaporation from each ink droplet leads to a formation of microdome-shaped colloidal assembles of close-packed structures. Microspectroscopic analysis has confirmed that the individual assembly serves as a photonic crystal and its optical properties can be correlated with the microstructural features. Unlike other techniques of patterned growth of colloidal photonic crystal, the substrate does not need to be patterned first and no template is needed in the direct writing by the ink-jet printing. Using our strategy, we have rapidly produced the colloidal photonic crystal microarrays composed of different-sized spheres addressably patterned on the same substrate.     

Optical properties and photonic density of states in one-dimensional and three-dimensional liquid-crystalline photonic crystals

ABSTRACT

Complex optical investigations were performed in one-dimensional (cholesteric) and three-dimensional (Blue Phase II) liquid-crystalline photonic crystals. Spectra of optical transmission and luminescence in the range of the photonic stop band contain information about the local anisotropy, characteristics of the photonic stop band, photonic density of states. We determine the photonic density of states in one-dimensional and three-dimensional liquid-crystalline photonic crystals employing measurements of polarised luminescence. The width of the photonic band gap, density of states and the optical characteristics related to the density of states essentially change with temperature in one-dimensional cholesteric photonic crystal. Drastic transformation of the density of states was found at the transition from one-dimensional to three-dimensional (Blue Phase II) photonic crystal. The results of our investigations demonstrate the possibility to employ the applied method for various types of photonic structures.     

Fabrication of photonic crystals with nigrosine-doped poly(MMA-co-DVB-co-MAA) particles

A convenient approach was developed to fabricate monodisperse nigrosine-doped poly(methyl methacrylate-co-divinylbenzene-co-methacrylic acid) nanoparticles with different cross-linkage by soap-free emulsion polymerization at boiling status and swelling process. The dye-doped nanoparticles were used for the fabrication of colloidal crystal films and beads. It was found that nigrosine dye in the nanoparticles can efficiently depress the light scattering inside the colloidal crystal films and eliminate the iridescent effect in the photonic beads. These results make the colloidal crystals useful in photonic paper, bioassay, and so on.     

Tailoring photonic crystals with nanometer-scale precision using polyelectrolyte multilayers

In this paper, we describe a rapid, accurate, and convenient method for postsynthetically tuning the optical properties of colloidal photonic crystals. High quality photonic crystal films are first synthesized and then coated iteratively with layers of water-soluble polyelectrolytes. The coating process results in nanometer-scale shifts in the photonic stop band, a process which has been monitored by theoretical modeling. The results suggest a fundamentally different, reproducible layering mechanism inside the confined spaces of the colloidal crystal where polyelectrolyte multilayers are less densely packed.     

Nanoparticle-mediated epitaxial assembly of colloidal crystals on patterned substrates

We have studied the assembly of 3-D colloidal crystals from binary mixtures of colloidal microspheres and highly charged nanoparticles on flat and epitaxially patterned substrates created by focused ion beam milling. The microspheres were settled onto these substrates from dilute binary mixtures. Laser scanning confocal microscopy was used to directly observe microsphere structural evolution during sedimentation, nanoparticle gelation, and subsequent drying. After microsphere settling, the nanoparticle solution surrounding the colloidal crystal was gelled in situ by introducing ammonia vapor, which increased the pH and enabled drying with minimal microsphere rearrangement. By infilling the dried colloidal crystals with an index-matched fluorescent dye solution, we generated full 3-D reconstructions of their structure including defects as a function of initial suspension composition and pitch of the patterned features. Through proper control over these important parameters, 3-D colloidal crystals were created with low defect densities suitable for use as templates for photonic crystals and photonic band gap materials.     

Doped colloidal photonic crystal structure with refractive index chirping to the [111] crystallographic axis

A three-dimensionally ordered array of close-packed colloidal spheres, a photonic crystal structure in which the refractive index of the medium interstitial lattice in a colloidal crystal spatially changes in the [111] crystallographic axis, is demonstrated. The colloidal photonic crystal structure with refractive index chirping was produced by infiltration of a monomer and organic dopants with a high refractive index into a silica opal, followed by interfacial gel polymerization. The resulting photonic crystal structure has a gradually varying stop band at each different (111) plane in the face-centered cubic (fcc) crystal structure at a normal incidence. This novel structure exhibited optical characteristics that have band-gap broadening by the superposition of stop bands at each plane of the crystal with different dielectric functions. Moreover, the refractive index perturbation in the [111] fcc opal also showed a defect state within a pseudo-photonic band gap. This new type of photonic crystal structure should be useful for the band-gap engineering of photonic-band-gap materials.     

带隙可调各向同性蛋白石光子晶体的制备与研究

用旋涂法将聚苯乙烯微球组装成光子晶体,研究了此光子晶体的特点,并分析了在单一微球粒径下旋涂参数对光子带隙的影响.结果表明:旋涂法制备的光子晶体具有各向同性特点,其光子带隙由旋涂参数决定.光子晶体的反射波段取决于乳液中微球的质量分数,而反射强度取决于旋涂层数.因此,在设计光子晶体时,可以根据需要,通过微球的质量分数和旋涂...     

Effects of liquid bridge between colloidal spheres and evaporation temperature on fabrication of colloidal multilayers

For the application of colloidal crystal films as "photonic band gap" materials, their domain size and thickness are significant. The substrate withdrawing speed, the colloidal suspension volume fraction, and the colloidal suspension temperature have been studied for the domain size and thickness controls of colloidal crystals in this study. Stable dispersions of monodispersed polystyrene spheres with a diameter of 245 nm were synthesized according to a general emulsion polymerization for colloidal crystal films. By experimental results and the theoretical relationship between the number of layers and other parameters, we could know that the water bridge between colloidal spheres (which is formed by capillary force) influences the number of colloidal crystal layers significantly.     

Tuning of Photonic band gap via combined effect of electric and optical fields in a blue phase liquid crystal composite

ABSTRACT

Blue phase liquid crystals are soft 3D photonic crystals in which the liquid crystal molecules self-assemble to form a cubic structure with lattice spacing of a few hundred nanometers resulting in selective reflection of colours in the visible spectrum. The corresponding wavelength or the ‘photonic band gap’ can be tuned using various external stimuli such as thermal, electric, magnetic and optical fields. Here, we report efficient tuning of photonic band gap by utilising the combination of electric and optical fields in a blue phase liquid crystalline system. The studies indicate that the chirality of the medium has a direct bearing on the direction of the wavelength shift and the extent of the photonic band gap tunability. More importantly, the synergistic effect of the two fields helps in reversible tuning of the band gap.     

In situ monitoring of structural changes during colloidal self-assembly

Reflectance spectroscopy is utilized to monitor structural changes during the self-assembly of a monodisperse colloidal system at the meniscus of a sessile drop on an inert substrate. Treating the ordered colloidal structure as a photonic crystal is equivalent to monitoring the changes in the photonic band gap (PBG) as the colloidal system self-assembles heterogeneously into a crystal through solvent evaporation in ambient conditions. Using a modified Bragg's law model of the photonic crystal, we can trace the structural evolution of the self-assembling colloidal system. After a certain induction period, a face-centered cubic (FCC) structure emerges, albeit with a lattice parameter larger than that of a true close-packed structure. This FCC structure is maintained while the lattice parameter shrinks continuously with further increase in the colloidal concentration due to drying. When the structure reaches a lattice parameter 1.09 times the size of that of a true close-packed structure, it undergoes an abrupt decrease in lattice spacing, apparently similar to those reported for lattice-distortive martensitic transformations. This abrupt final lattice shrinkage agrees well with the estimated Debye screening length of the electric double layer of charged colloids and could be the fundamental reason behind the cracking commonly seen in colloidal crystals.     

Fabrication of monodisperse asymmetric colloidal clusters by using contact area lithography (CAL)

We report a new fabrication method of asymmetric colloidal clusters by using contact area lithography with site-selective growth. Nanometric surface patterns (approximately 44, 60, and 81 nm in diameter) were prepared by coating surfaces with self-assembled monolayers (SAMs; octadecyltrichlorosilane (OTS) in this study) except the contact area either between colloidal particles or between colloids and substrate. Nanoscale site-specific heterogeneous nucleation and growth of oxide materials of titanium were studied using the patterns of OTS-SAMs onto the either flat or curved surfaces of SiO2. Experimental results suggest that a combination of the large difference in the surface energy between the growing and surrounding surfaces and the diffusion-controlled growth leads to complete nanoscale site specificity. We also fabricated superstructrures of silica spheres with hemispheres of titania (<20 nm in dimension) on their surfaces and discussed the optical properties of colloidal films consisting of the monodisperse asymmetric colloidal clusters in terms of photonic band gap.     

胶体晶体自组装排列进展

自组装排列胶体晶体是发展光子晶体等亚微米周期有序结构及新型光电子器件十分重要的环节.高电荷密度单分散胶体球在较弱的离子强度和稀浓度下会自发排列形成紧密堆积的周期性结构(ccp),常常是面心立方(fcc),科学家们以此为基础发展了多种结晶化胶体粒子的方法,包括重力场沉积、电泳沉积、胶体外延技术、垂直沉积、流通池、物理束缚排列及其他的许多方法.目前排列的胶体粒子基本为球形,材料也多为SiO2、PS、PMMA,此外一些复合粒子,主要为核壳粒子的排列这里也稍作介绍,这些方法及其变通的使用可以形成类蛋白石及反蛋白石结构,最终实现光子带隙及其它多种用途。     

Formation of spatially patterned colloidal photonic crystals through the control of capillary forces and template recognition

We report the formation of microscopic patterns of substrate-supported, 3D planar colloidal crystals using physical confinement in conjunction with surfaces displaying predetermined binary patterns of hydropholicity. The formation process involves a primary self-assembly wherein nano- and microscale colloids order into a photonic fcc lattice via capillary interactions followed by a secondary template-induced crystal cleavage step. Following this method, arbitrary arrays of pattern elements, which preserve structural and orientational properties of the parent crystal, can be easily obtained.