RT growth of acetonitrile and acrylonitrile on Si(0 0 1)-2 × 1 studied by XPS and LEED

In this work we show the adsorption of acetonitrile (CH₃CN) and acrylonitrile (CH₂CHCN) on Si(0 0 1)-2 × 1 at room temperature by increasing the molecular doses. Especially, by means of XPS and LEED data, we stress the action of these molecules on the silicon surface locating the dangling-bonds quasi-saturation within 10 L. The shortage of nitrogen XPS signal and some anomalies in carbon spectra point to an invading action from a traditional X-ray source (Al-K_α line) against chemisorbed molecules. In particular, we think that a long exposure to this radiation could break carbon-silicon bonds changing some adsorption geometries and making desorb molecular fragments.     

High resolution XPS studies on hexadecafluoro-copper-phthalocyanine deposited onto Si(1 1 1)7×7 surface

High resolution X-ray photoelectron spectroscopy measurements have been performed onto ultrathin films of hexadecafluoro copper phthalocyanine deposited, at room temperature and in ultrahigh vacuum conditions, onto clean Si(1 1 1)7×7 substrate (silicon, Si). The measurements, performed at various film thicknesses, show a strong interaction between the molecule and the Si substrate. All the core level peaks present strong modifications induced by the substrate interaction. In particular the fluorine (F) spectrum clearly presents the effect of the interaction of some F atoms of the molecule with the substrate, which determines the formation of F–Si bonds while the copper spectrum indicates a charge transfer from the Si substrate. The changes observed in the other core level spectra have been attributed to a different charge distribution in the molecule, after the formation of F–Si bonds. We suggest a planar growth of these molecules on the Si substrate starting from the first layer.     

Mechanism of GeH4 dissociation on Si(1 1 1)-(7 × 7)

Results of an STM study of dissociative GeH₄ adsorption on Si(1 1 1)-(7 × 7) at 300 K show that GeH₄ adsorbs under scission of two Ge-H bonds according to GeH₄(g) + 4db → GeH₂(ad) + 2H(ad). GeH₂ binds to two adatom dangling bonds in a bridged configuration, while the two released hydrogen atoms saturate two additional dangling bonds. The GeH₄ sticking coefficient under these conditions is 1.2 × 10⁻⁶, one order of magnitude smaller than for SiH₄.     

DFT calculations of XPS/NEXAFS and IR spectra to elucidate the reaction products of acetonitrile with Si(0 0 1)-2 × 1

NEXAFS data [S. Rangan et al., Phys. Rev. B 71 (2005) 165319] and FTIR data [M.P. Schwartz, R.J. Hamers, Surf. Sci. 601 (2007) 945] apparently do not converge in the identification of the reaction products of acetonitrile (CH₃CN) with Si(0 0 1)-2 × 1 at room temperature. Using DFT calculations of core-excited/core-ionized spectra and of IR vibrational frequencies and intensities, we show the consistency of the body of experimental data. Three species are present on the surface in equivalent amounts, a CN moiety, a pendent CN and a CCN ketenimine submitted to a strong twist imposed by the Si bond directionality. More generally, the paper shows the usefulness of spectroscopic data simulations in the elucidation of complex surface chemistry problems.     

Adsorption and structure of methyl mercaptoacetate on Cu(1 1 1) surface by XPS and NEXAFS spectroscopy

Methyl mercaptoacetate (MA) on Cu(1 1 1) surface was investigated using synchrotron radiation-based X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. MA adsorbs on the surface via thiolate formation and weak interaction of the carbonyl group with the surface. Two different adsorption states previously reported for methanethiolate and ethanethiolate were confirmed, besides atomic sulfur. NEXAFS measurements support gauche-type conformation of MA whose skeleton lies on the surface.     

Chemisorption of alkyl thiols and S-alkyl thiosulfates on Pt(1 1 1) and polycrystalline platinum surfaces

The self-assembled monolayers prepared from 1-dodecanethiol (C₁₂SH) or S-dodecylthiosulfate (Bunte salt, C₁₂SSO₃Na) have been characterised on polycrystalline gold and platinum surfaces and on Pt(1 1 1). Contact angle and impedance measurements show that the film quality decreases in the order Au/C₁₂SH > Pt/C₁₂SH ∼ Au/C₁₂SSO₃Na > Pt/C₁₂S SO₃Na. XPS measurements show that the S-SO₃ bond of organic thiosulfates is broken on platinum surfaces and the state of the surface-bound sulfur is indistinguishable from that of thiolate. On platinum three sulfur species are formed upon SAM formation and we suggest that the catalytic activity of platinum is responsible for their existence in pristine monolayers.     

Adsorption of PTCDI on Au(1 1 1): Photoemission and scanning tunnelling microscopy

The adsorption of perylene-3,4,9,10-tetracarboxylic-3,4,9,10-diimide (PTCDI) on Au(1 1 1) has been studied using synchrotron-based X-ray photoelectron spectroscopy and in situ scanning tunnelling microscopy. Direct topographic and surface coverage information provided by the scanning probe measurements have enabled us to correlate peaks in the relatively complex carbon core-level photoemission to interactions of the surface with different parts of the PTCDI molecule. A strong interaction between the imide ends of the molecule with the underlying gold substrate is evidenced by a large chemical shift in the imide carbon peaks, which is observed only for the first adsorbed layer.     

XPS study of SnTe(1 0 0) oxidation by molecular oxygen

The interaction between the (1 0 0) surface of SnTe single crystal and molecular oxygen was studied by means of X-ray photoelectron spectroscopy (XPS). Analysis of the obtained spectra shows that the mechanism of surface oxidation does not change in the range of oxygen exposure 10⁸-10¹³ L. During the oxidation an additional component shifted 1.1 eV towards higher binding energies appears in the Sn 3d spectra. The Te 3d_5/2 spectra fitting reveals two additional components with binding energies close to Te⁰ and Te⁺⁴. The dependence of the additional components fraction in both Sn 3d and Te 3d_5/2 spectra on the oxygen exposure is semi-logarithmic. On the base of the experimental data two possible mechanisms are proposed.     

Epitaxial SiC formation induced by medium energy ions on Si(1 1 1) at room temperature

In the search for silicon technology compatible substrate for III-nitride epitaxy, we present a proof-of-concept for forming epitaxial SiC layer on Si(1 1 1). A C/Si interface formed by ion sputtering is exposed to 100-1500 eV Ar⁺ ions, inducing a chemical reaction to form SiC, as observed by core-level X-ray photoelectron spectroscopy (XPS). Angle dependent XPS studies shows forward scattering feature that manifest the epitaxial SiC layer formation, while the valence band depicts the metal to insulator phase change.     

The effect of controlled ion bombardment on the electronic structure of the Si(0 0 1) surface

We have studied the effects of controlled ion bombardment on the electronic structure of the Si(0 0 1) surface. The surface was exposed to various doses of Ar⁺ ions accelerated towards the surface at 500 eV. X-ray photoelectron spectroscopy (XPS) spectra of the irradiated H-terminated Si(0 0 1) surface reveal the appearance of peaks that are associated with the presence of cleaved Si bonds. Ultraviolet photoelectron spectroscopy (UPS) spectra of the irradiated Si(0 0 1)2 × 1 surface show that the dimer dangling-bond surface state decays monotonically with increasing dose. These results, coupled with previous scanning tunneling microscopy (STM) studies, indicate that the breaking of dimers, and possibly the creation of adatom-like defects, during ion irradiation are responsible for the changes in the electronic structure of the valence band for this surface.     

Photoemission study of cobalt interaction with the oxidized Si(1 0 0)2 × 1 surface

The interaction of cobalt atoms with an oxidized Si(1 0 0)2 × 1 surface was studied by photoelectron spectroscopy with synchrotron radiation at room and elevated temperatures. The SiO_x layer grown in situ on the crystal surface was ∼0.3 nm thick, and the amount of deposited cobalt was varied within eight atomic layers. It was found that Co atoms could penetrate under the SiO_x layer even at room temperature in the initial growth. As the Co amount increased, a ternary Co-O-Si phase was formed at the interface, followed by a Co-Si solid solution. Silicide synthesis associated with the decomposition of these phases started under the SiO_x layer at ∼250 °C, producing cobalt disilicide with a stable CaF₂-type of structure.     

Ultra-thin Si overlayers on the TiO2 (1 1 0)-(1 × 2) surface: Growth mode and electronic properties

The growth of thin subnanometric silicon films on TiO₂ (1 1 0)-(1 × 2) reconstructed surfaces at room temperature (RT) has been studied in situ by X-ray and ultra-violet photoelectron spectroscopies (XPS and UPS), Auger electron and electron-energy-loss spectroscopies (AES and ELS), quantitative low energy electron diffraction (LEED-IV), and scanning tunneling microscopy (STM). For Si coverage up to one monolayer, a heterogeneous layer is formed. Its composition consists of a mixture of different suboxides SiO_x (1 < x ? 2) on top of a further reduced TiO₂ surface. Upon Si coverage, the characteristic (1 × 2) LEED pattern from the substrate is completely attenuated, indicating absence of long-range order. Annealing the SiO_x overlayer results in the formation of suboxides with different stoichiometry. The LEED pattern recovers the characteristic TiO₂ (1 1 0)-(1 × 2) diagram. LEED I-V curves from both, substrate and overlayer, indicate the formation of nanometric sized SiO_x clusters.     

Reaction of chlorinated benzenes with Si(1 0 0)2 × 1: a theoretical study

Theoretical (HF + DFT) investigations of the adsorption of chlorobenzene (ClPh), 1,2- and 1,4-dichlorobenzene (1,2-diClPh and 1,4-diClPh) on a silicon (1 0 0) surface are reported for the first time, and are compared with one another and with benzene. Binding energies for various structures with the molecules attached on-top and in-between the surface dimer rows are correlated with the STM experimental data. Novel structures with the molecules linking two dimer rows, stabilised by detachment of Cl (or H)-atoms forming Cl-Si (or H-Si) bonds, are described. For 1,4 and 1,2 binding, these linking structures are predicted to attach the phenyl ring parallel or perpendicular to the Si surface, respectively, while preserving its aromaticity. The potential-energy barriers between several different structures are evaluated, and compared with available experimental evidence. For 1,4-diClPh it is shown that the potential-energy barrier for the second Cl transfer is significantly lower than for the first one in contrast to the gas-phase, and comparable to the barrier for lifting the Bz-ring into a vertical position and forming a singly bonded ‘displaced’ structure. The predicted barrier-heights are consistent with the experimentally observed relative occurrence of the on-top, linking, and displaced structures.     

Surface chemistry of NO and NO2 on the Pt(1 1 0)-(1 × 2) surface: A comparative study

The surface chemistry of NO and NO₂ on clean and oxygen-precovered Pt(1 1 0)-(1 × 2) surfaces were investigated by means of high resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS) and thermal desorption spectroscopy (TDS). At room temperature, NO molecularly adsorbs on Pt(1 1 0), forming linear NO(a) and bridged NO(a). Coverage-dependent repulsive interactions within NO(a) drive the reversible transformation between linear and bridged NO(a). Some NO(a) decomposes upon heating, producing both N₂ and N₂O. For NO adsorption on the oxygen-precovered surface, repulsive interactions exist between precovered oxygen adatoms and NO(a), resulting in more NO(a) desorbing from the surface in the form of linear NO(a). Bridged NO(a) experiences stronger repulsive interactions with precovered oxygen than linear NO(a). The desorption activation energy of bridged NO(a) from oxygen-precovered Pt(1 1 0) is lower than that from clean Pt(1 1 0), but the desorption activation energy of linear NO(a) is not affected by the precovered oxygen. NO₂ decomposes on Pt(1 1 0)-(1 × 2) surface at room temperature. The resulted NO(a) (both linear NO(a) and bridged NO(a)) and O(a) repulsively interact each other. Comparing with NO/Pt(1 1 0), more NO(a) desorbs from NO₂/Pt(1 1 0) as linear NO(a), and both linear NO(a) and bridged NO(a) exhibit lower desorption activation energies. The reaction pathways of NO(a) on Pt(1 1 0), desorption or decomposition, are affected by their repulsive interactions with coexisting oxygen adatoms.     

Structure and properties of 1,4-benzenedimethanethiol films grown from solution on Au(1 1 1): An XPS and NEXAFS study

Core level photoemission and X-ray absorption at the carbon C 1s edge are applied to the study of chemisorption of 1,4-benzenedimethanethiol molecules on Au(1 1 1) and to investigate the effect of the solvent used to prepare the organic films. 1,4-Benzenedimethanethiol films were prepared in polar and non-polar solvents, i.e. ethanol, methanol and n-hexane. 1,4-Benzenedimethanethiol molecules are anchored to the substrate through a single S-Au bond; the molecules in the films tend to assume an upright orientation, the aromatic ring resulting tilted towards the direction perpendicular to the substrate plane. The films present an effective thickness corresponding to more than a single layer. Only small differences are observed among behaviours in different solvents. It is concluded that the final properties and conformation of the 1,4-benzenedimethanethiol films are largely determined by the reciprocal interactions between the molecules and with the substrate.     

Adsorption site, core level shifts and charge transfer on the Pd(1 1 1)-I(√3 × √3) surface

We use core level photoelectron spectroscopy and density functional theory (DFT) to investigate the iodine-induced Pd(1 1 1)-I(√3 × √3) structure formed at 1/3 ML coverage. From the calculations we find that iodine adsorbs preferentially in the fcc hollow site. The calculated equilibrium distance is 2.06 Å and the adsorption energy is 68 kcal/mol, compared to 2.45 Å and 54 kcal/mol in the atop position. The adsorption energy difference between fcc and hcp hollows is 1.7 kcal/mol. Calculated Pd 3d surface core level shift on clean Pd(1 l 1) is 0.30 eV to lower binding energy, in excellent agreement with our experimental findings (0.28-0.29 eV). On the Pd(1 1 1)-I(√3 × √3) we find no Pd 3d surface core level shift, neither experimentally nor theoretically. Calculated charge transfer for the fcc site, determined from the Hirshfeld partitioning method, suggests that the iodine atom remains almost neutral upon adsorption.     

In situ XPS study of Pd(1 1 1) oxidation. Part 1: 2D oxide formation in 10 mbar O2

The oxidation of the Pd(1 1 1) surface was studied by in situ XPS during heating and cooling in 3 × 10⁻³ mbar O₂. A number of adsorbed/dissolved oxygen species were identified by in situ XPS, such as the two dimensional surface oxide (Pd₅O₄), the supersaturated O_ads layer, dissolved oxygen and the R 12.2° surface structure.Exposure of the Pd(1 1 1) single crystal to 3 × 10⁻³ mbar O₂ at 425 K led to formation of the 2D oxide phase, which was in equilibrium with a supersaturated O_ads layer. The supersaturated O_ads layer was characterized by the O 1s core level peak at 530.37 eV. The 2D oxide, Pd₅O₄, was characterized by two O 1s components at 528.92 eV and 529.52 eV and by two oxygen-induced Pd 3d_5/2 components at 335.5 eV and 336.24 eV. During heating in 3 × 10⁻³ mbar O₂ the supersaturated O_ads layer disappeared whereas the fraction of the surface covered with the 2D oxide grew. The surface was completely covered with the 2D oxide between 600 K and 655 K. Depth profiling by photon energy variation confirmed the surface nature of the 2D oxide. The 2D oxide decomposed completely above 717 K. Diffusion of oxygen in the palladium bulk occurred at these temperatures. A substantial oxygen signal assigned to the dissolved species was detected even at 923 K. The dissolved oxygen was characterised by the O 1s core level peak at 528.98 eV. The “bulk” nature of the dissolved oxygen species was verified by depth profiling.During cooling in 3 × 10⁻³ mbar O₂, the oxidised Pd²⁺ species appeared at 788 K whereas the 2D oxide decomposed at 717 K during heating. The surface oxidised states exhibited an inverse hysteresis. The oxidised palladium state observed during cooling was assigned to a new oxide phase, probably the R 12.2° structure.     

SiO adsorption on a p(2 × 2) reconstructed Si(1 0 0) surface

We have investigated the adsorption mechanism of SiO molecule incident on a clean Si(1 0 0) p(2 × 2) reconstructed surface using density functional theory based methods. Stable adsorption geometries of SiO on Si surface, as well as their corresponding activation and adsorption energies are identified. We found that the SiO molecule is adsorbed on the Si(1 0 0) surface with almost no activation energy. An adsorption configuration where the SiO binds on the channel separating the dimer rows, forming a Si-O-Si bridge on the surface, is the energetically most favourable geometry found. A substantial red-shift in the calculated vibrational frequencies of the adsorbed SiO molecule in the bridging configurations is observed. Comparison of adsorption energies shows that SiO adsorption on a Si(1 0 0) surface is energetically less favourable than the comparable O₂ adsorption. However, the role of SiO in the growth of silicon sub-oxides during reactive magnetron plasma deposition is expected to be significant due to the relatively large amount of SiO molecules incident on the deposition surface and its considerable sticking probability. The stable adsorption geometries found here exhibit structural properties similar to the Si/SiO₂ interface and may be used for studying SiO_x growth.     

Conformational isomers of stilbene on Si(1 0 0)

Stilbene (1,2-diphenylethylene) has shown an intriguing isomerisation behavior and may serve as a model system for “molecular switches” incorporating a CC double bond. To evaluate the possible use of such molecules as molecular switches on semiconductor surfaces, the adsorption of cis- and trans-stilbene on Si(1 0 0) has been investigated. Identification of both isomers is achieved by differences in adsorption geometry as revealed by NEXAFS, and differences in electronic structure in the occupied and unoccupied molecular orbitals. For both isomers, bonding takes place via the CC double bond to the Si dimer atoms allowing for free movement of the aromatic rings, a necessary prerequisite for photoinduced isomerisation on the surface. Our experimental results agree well with theoretical calculations.     

Influence of surface temperature and surface modifications on the initial layer growth of para-hexaphenyl on mica (0 0 1)

Ultra-thin films of para-hexaphenyl (6P) were prepared on muscovite mica (0 0 1) utilizing organic molecular beam deposition (OMBD) under well defined ultra high vacuum (UHV) conditions. The 6P growth characteristics were studied as a function of substrate temperature and substrate surface conditions. For the initial state of layer growth, thermal desorption spectroscopy (TDS) was used to verify the existence of a wetting layer. In this monomolecular continuous wetting layer, the molecules lie flat on the surface and are rather strongly bonded. For thicker films, in-situ X-ray photoelectron spectroscopy (XPS) in combination with (TDS) was applied to reveal the kinetics of the layer growth. Ex-situ atomic-force microscopy (AFM) was used to determine the film morphology. In particular, the influence of surface modifications (carbon contamination, sputtering) on 6P layer growth was investigated. XPS and low energy electron diffraction (LEED) were used to characterize the mica surface before the film deposition. TDS and AFM revealed a considerable change in film growth, from a needle-like island growth of flat laying molecules on top of the wetting layer (for the air cleaved mica) to terrace-like film growth of standing molecules, without a wetting layer (after surface modifications).