Coalescence kinetics of two-dimensional TiN islands on atomically smooth TiN(0 0 1) and TiN(1 1 1) terraces

In situ high-temperature scanning tunneling microscopy (STM) was employed to follow the coalescence kinetics of two-dimensional TiN islands on atomically smooth TiN(0 0 1) and TiN(1 1 1) terraces. The results are analyzed using a numerical approach based upon Mullin’s theory for surface relaxation and experimentally determined absolute orientation-dependent step stiffnesses. From the calculated time-dependent island shapes during coalescence, in combination with the STM data, we obtain quantitative values for edge mobilities.     

Phase transition of thiophene molecules on Au(1 1 1) in solution

The orientation and packing arrangement of thiophene molecules on a well-defined Au(1 1 1) surface in 0.1 M HClO₄ solution have been investigated as a function of applied potentials by in situ scanning tunneling microscopy (STM) and electrochemical method. Thiophene molecules are found to form highly ordered adlayers in the double layer region. High-resolution STM images reveal different adlayer structures. Thiophene molecules take flat-lying and vertical orientation at 0.3 and 0.6 V, respectively. Compared with the results of electrochemical measurement, we concluded that the phase transition of thiophene on Au(1 1 1) occurs as the potential is changed between 0.1 and 0.65 V.     

One-dimensional structural and electronic properties of magnetite Fe3O4(1 1 0)

We study the structure and the electronic properties of the (1 1 0) surfaces of magnetite Fe₃O₄ thin films by scanning tunneling microscopy (STM) and spectroscopy (STS). The STM images show a surface reconstruction consisting of ridges along the direction. Based on atomically resolved STM images we present a model for the observed ridge reconstruction of the surface, in agreement with a bulk-truncated layer containing both octahedral and tetrahedral iron ions. The metallic and semiconductor-like shapes of the measured current-voltage (I-V) curves indicate a non-uniform segregation of magnesium through the film. The weak contrast between the tops and valleys of ridges measured in the STS current maps is attributed to tetrahedral and octahedral coordination at the tops and the valleys, respectively. This attribution is in agreement with the proposed structure model. We observe a contrast enhancement at a tip change accompanied by a corrugation enhancement. This tip change is induced by picking up material from the sample, resulting in a magnetic tip. Thus, the contrast enhancement is attributed to detection of spin polarized current.     

SrTiO3(0 0 1) reconstructions: the (2 × 2) to c(4 × 4) transition

Scanning tunneling microscopy (STM) is used to investigate the (0 0 1) surface structure of Nb doped SrTiO₃ single crystals annealed in ultra high vacuum (UHV). Atomically resolved images of the (2 × 2) reconstructed surface are obtained after annealing a chemically etched sample. With further annealing dotted row domains appear, which coexist with the (2 × 2) reconstruction. The expansion of these domains with further annealing gives rise to the formation of a TiO₂ enriched c(4 × 4) reconstruction.     

Herringbone and triangular patterns of dislocations in Ag, Au, and AgAu alloy films on Ru(0 0 0 1)

We have studied the dislocation structures that occur in films of Ag, Au, and Ag_0.5Au_0.5 alloy on a Ru(0 0 0 1) substrate. Monolayer (ML) films form herringbone phases while films two or more layers thick contain triangular patterns of dislocations. We use scanning tunneling microscopy (STM) and low-energy electron diffraction (LEED) to determine how the film composition affects the structure and periodicity of these ordered structures. One layer of Ag forms two different herringbone phases depending on the exact Ag coverage and temperature. Low-energy electron microscopy (LEEM) establishes that a reversible, first-order phase transition occurs between these two phases at a certain temperature. We critically compare our 1 ML Ag structures to conflicting results from an X-ray scattering study [H. Zajonz et al., Phys. Rev. B 67 (2003) 155417]. Unlike Ag, the herringbone phases of Au and AgAu alloy are independent of the exact film coverage. For two layer films in all three systems, none of the dislocations in the triangular networks thread into the second film layer. In all three systems, the in-plane atomic spacing of the second film layer is nearly the same as in the bulk. Film composition does, however, affect the details of the two layer structures. Ag and Au films form interconnected networks of dislocations, which we refer to as “trigons.” In 2 ML AgAu alloy, the dislocations form a different triangular network that shares features of both trigon and moiré structures. Yet another well-ordered structure, with square symmetry, forms at the boundaries of translational trigon domains in 2 ML Ag films but not in Au films.     

Atomic structure of Cu2O(1 1 1)

Low-energy electron diffraction and scanning tunneling microscopy have been used to probe the surface atomic structure of Cu₂O(1 1 1) after various sample preparations. Annealing in oxygen gives a stoichiometric (1 × 1) oxygen terminated surface and further annealing in ultra-high vacuum results in a clear reconstruction and surface faceting. Tunneling from filled states in the reconstructed surface reveals a hexagonal pattern of large protrusions, which show an internal structure. The reconstruction is believed to be due to one-third of a monolayer of ordered oxygen vacancies. At areas on the surface where the large features are missing, another smaller type of protrusions is visible, which is associated with the ideal (1 × 1) surface. The relative position of the two types of features gives two possible models of the (1 1 1) surface. In the first model, the (1 × 1) surface is the ideal bulk terminated surface and coordinatively unsaturated oxygen ions are missing in the reconstructed surface. The second model agrees with the first model with the exception that coordinatively unsaturated copper ions in the outmost copper layer are missing in both the (1 × 1) and the reconstructed surface. The latter model is supported by previous surface free energy calculations. Since the undercoordinated copper ions have been suggested to be the catalytic active sites of Cu₂O(1 1 1), the presence or absence of these cations could be of great importance for the fundamental understanding of the surface reactivity of Cu₂O and of copper-based catalysts.     

Driving force for the WO3(0 0 1) surface relaxation

The optimized structure of the WO₃(0 0 1) surface with various types of termination ((1 × 1)O, (1 × 1)WO₂, and c(2 × 2)O) has been simulated using density functional theory with the Perdew-Wang 91 gradient corrected exchange-correlation functional. While the energy of bulk WO₃ depends weakly on the distortions and tilting of the WO₆ octahedra, relaxation of the (0 0 1) surface results in a significant decrease of surface energy (from 10.2 × 10⁻² eV/Ų for the cubic ReO₃-like, c(2 × 2)O-terminated surface to 2.2 × 10⁻² eV/Ų for the relaxed surface). This feature illustrates a potential role of surface relaxation in formation of crystalline nano-size clusters of WO₃. The surface relaxation is accompanied by a dramatic redistribution of the density of states near the Fermi level, in particular a transformation of surface electronic states. This redistribution is responsible for the decrease of electronic energy and therefore is suggested to be the driving force for surface relaxation of the WO₃(0 0 1) surface and, presumably, similar surfaces of other transition metal oxides.     

Atomic geometry and electronic properties of the Ge(1 1 1)2 × 1-Sb surface studied by scanning tunneling microscopy/spectroscopy and core-level photoemission

By scanning tunneling microscopy and spectroscopy (STM/S) and high-resolution core-level photoemission using synchrotron radiation, we have investigated the atomic structure and electronic properties of Sb-induced 2 × 1 reconstruction on Ge(1 1 1). Our results support well the zigzag-chain model proposed for this phase in the literature; in particular, the STM images visualize the Sb zigzag (Seiwatz) chain in a real space, and the STS I-V spectrum suggests this surface to be semiconducting, in good agreement with the atomic configuration proposed. However, a closer inspection of the STM results does not support the buckling of Sb chains reported in earlier studies. Moreover, the analysis of the Sb 4d core-level line shape of the (2 × 1) reconstruction shows that the bonding state of the Sb atoms is very similar, suggesting an unbuckled Seiwatz chain. In addition, the Ge 3d core-level emission reveals only one component, giving evidence for the ideal bulk-terminated structure of the Ge substrate.     

Spatially resolved dynamics of the TiO2(1 1 0) surface reconstruction

We use low-energy electron microscopy to image the reversible transformation of the TiO₂(1 1 0) surface between a high-temperature 1 × 1 structure and a low-temperature 1 × 2 structure. The reconstruction dynamics are novel: 1 × 2 bands nucleated during cooling at the steps of the starting 1 × 1 surface and then grew laterally from the steps. The transformation kinetics are dominated by mass flow from the surface to the bulk, a process that facilitates converting the high-density 1 × 1 phase to the lower-density 1 × 2 phase. We have also imaged how the 1 × 1 surface reconstructs to 1 × 2 phase after sufficient oxygen is removed from the crystal’s bulk during vacuum annealing. 1 × 2 bands also nucleated and grew laterally from the initial 1 × 1-surface’s steps. However, because this isothermal 1 × 1-to-1 × 2 transition occurs largely by mass redistribution on the surface, the steps of the initial 1 × 1 surface and final 1 × 2 surface are offset. We propose models of mass redistribution during the 1 × 1/1 × 2 phase transition to explain this effect. We conclude that the phase transition is first-order because it always occurred by the nucleation and growth of discrete phases. Finally, we show that quenching can roughen TiO₂’s surface by forming pits and that changing temperature causes step motion on 1 × 2 surfaces.     

Fidgety particles on surfaces: how do they jump, walk, group, and settle in virgin areas?

This article is aimed at describing the history and current status of surface diffusion, its vital importance in diverse surface phenomena and numerous industrial applications, the recent significant progress in its understanding, and, in particular, many unsettled questions concerning surface diffusion mechanisms. From the fundamental point of view, the interest in surface diffusion and, at the same time, the difficulties in its understanding, stem primarily from the collective (many-body) nature of this phenomenon. On the practical side, the importance of the knowledge of the physics behind surface diffusion is becoming increasingly crucial in the coming era of nanotechnology, which will bring an unprecedented level of miniaturization in electronics and a broad employment of various nanomaterials.     

Formation mechanism of the Si(1 1 1)7×7 reconstruction studied by scanning tunneling microscopy: Zipper-like restructuring in the sequential size changes of isolated single faulted-halves

The formation mechanism of the 7×7 reconstruction on annealed Si(1 1 1) surfaces has been demonstrated at the atomic level. In situ observations of unreconstructed regions (‘1×1’) on terraces after rapid quenching to 380 °C were done using scanning tunneling microscopy (STM) with a scanning speed of 1.7 s per frame. In the narrow ‘1×1’ regions, we imaged isolated single-faulted (F) halves of the dimer-adatom-stacking-fault (DAS) structure from “birth” to “death”. During “life”, the isolated single F-halves frequently changed their size. The size changes between odd-sized F-halves always took place through even-sized F-halves of intermediate sizes: 5×5-F^′↔6×6-F↔7×7-F^′↔8×8-F↔9×9-F^′↔10×10-F↔11×11-F^′↔12×12-F↔13×13-F^′, where the 5×5-F^′, 7×7-F^′ and so forth are irregular-type structures of the odd-sized F-halves. Even-sized F-halves and the irregular-type structures are necessary in the size changes, whereas the regular-type structures have never been involved. Lifetimes of the 10×10-F, 8×8-F, and 6×6-F at 380 °C are about 10.5, 6, and 2-3 s, respectively, which are much shorter than those of the isolated irregular-type structures of the odd-sized F-halves. With the aid of room temperature STM images of a rapidly quenched surface, we determined the atomic structures of the even-sized F-halves. We have proposed a sequential size change (SSC) model, including undiscovered parts of the size changes ‘1×1’ ↔2×2-F↔3×3-F^′↔4×4-F↔5×5-F^′, as the formation and decay mechanism of isolated single F-halves in the ‘1×1’ region. The SSC model has the following sequence: ‘1×1’ ↔ 2×2-F↔3×3-F^′↔4×4-F↔5×5-F^′↔6×6-F↔7×7-F^′↔8×8-F↔9×9-F^′↔10×10-F↔11×11-F^′↔12×12-F↔13×13-F^′. It was found by collecting statistics of size-change directions that one of two equivalent sides of the irregular-type structures, which have a mirror symmetry, is involved in the size changes thus indicating that other parts of the F-halves remain unchanged. Based on such findings, we have proposed the atomic processes for bond-rearrangements in the SSC model. The bond-rearrangements proceed along one side of a triangular F-half by breaking the existing dimers and forming new dimers like a “zipper”. Proposed atomic processes of the zipper-like restructuring are illustrated by a ball-and-stick model. The reason for the appearance of the even-sized F-halves and the irregular-type structures of the odd-sized ones is discussed in terms of the energy barrier heights along a reaction path in the size change of single F-halves.     

Electronic and structural properties of the InP(1 0 0)(2 × 4) surface studied by core-level photoemission and scanning tunneling microscopy

The (2 × 4)-reconstructed InP(1 0 0) surfaces have been investigated by scanning tunneling microscopy (STM) and synchrotron-radiation core-level photoelectron spectroscopy. STM observations show that the α2 model describes the atomic structure of the InP(1 0 0)(2 × 4) surface in a limited range of the surface-preparation conditions, as predicted theoretically but not previously observed. STM results also support the accuracy of the previously found mixed-dimer structure for the InP(1 0 0)(2 × 4) surface under less P-rich conditions. A study of P 2p core-level photoelectron spectra, measured with different surface-sensitivity conditions, demonstrates that P 2p photoemission from the mixed-dimer InP(1 0 0)(2 × 4) surface consists of at least two surface-core-level-shift (SCLS) components which have kinetic energies approximately 0.4 eV higher and 0.3 eV lower than the bulk emission. On the basis of the surface-sensitivity difference between these SCLSs, they are related to the third-layer and top-layer P sites in the mixed-dimer structure, respectively.     

An STM study of the Si(0 0 1) (2 × 7)-Gd, Dy surface

Both Gd and Dy induce two different reconstructions of the Si(0 0 1) surface with 2 × 4 and 2 × 7 unit cells. Detailed examination by scanning tunneling microscopy shows that the structure of both phases is essentially the same for both metals. Furthermore, the 2 × 7 unit cell contains structural subunits that are the same as the 2 × 4 structure. The similarities and differences between the two superstructures induced by the two metals are discussed.     

Morphological evidence for surface pre-melting on Si(1 1 1)

We present what we believe to be the first morphological evidence for the occurrence of surface pre-melting on the Si(1 1 1) surface. Our results complement the extensive previous evidence from diffraction and ion scattering techniques for the presence of pre-melted (liquid-like) layers on Si(1 1 1) below the bulk melting temperature and also suggest how atomic steps are involved in the initiation of such layers. Our results are based on atomic force microscopy studies of morphologies that are preserved when surfaces are annealed in a range of high temperatures and then rapidly cooled to room temperature for observation. A unique feature of the experiments is the use of specially prepared atomically flat or very low step density surfaces; this allows us to see how the liquid-like morphologies are associated with the steps and also allows the high temperature structures to survive the cooling process without being absorbed into the steps which normally would exist on a surface vicinal to (1 1 1). Quenched-in structures ascribed to pre-melting also act as sinks for diffusing ‘excess’ adatoms generated by the (1 × 1) to (7 × 7) transition and this leads to the formation of dendritic islands.     

First-principles study of oxidized Nb(1 0 0) surface structures

The atomic positions of the oxygen-induced c(2 × 2)-O, (3 × 1)-O and (4 × 1)-O surface structures on Nb(1 0 0) are determined by first-principles electronic structure calculations within the density functional theory comparing experimentally observed scanning tunneling microscopy (STM) images. STM images of these surfaces are calculated on the basis of the theory of Tersoff and Hamann. The theoretical and experimental STM images of the oxygen-chemisorbed c(2 × 2)-O structural model agree well. However, only the oxide-covered (3 × 1)-O and (4 × 1)-O structural models with two layers of NbO and contraction of the unit length along longitudinal 〈1 0 0〉 direction by 10% result in the theoretical STM images that agree with the experimental ones.     

Structural properties of Bi-terminated GaAs(0 0 1) surface

Electronic and structural properties of Bi-terminated reconstructions on GaAs(0 0 1) surface have been studied by scanning tunneling microscopy (STM) and synchrotron radiation core-level spectroscopy. A 2-3 monolayer thick Bi-layer was evaporated on a Ga-terminated GaAs(0 0 1) surface. By heating the surface, the reconstruction changed from (2 × 1) to (2 × 4). The α2 phase with one top Bi dimer and one As or Bi dimer in the third atomic layer per surface unit cell is proposed to explain the STM images of the Bi/GaAs(0 0 1)(2 × 4) surface heated at 400 °C. Bi 5d photoemission from the Bi/GaAs(2 × 4) consisted of two components suggesting two different bonding sites for Bi atoms on the (2 × 4) surface. The variation of the surface sensitivity of the photoemission induced no changes in the intensities of the components indicating that the origins of both components lie in the first surface layer.     

Surface structure of the missing-row reconstruction of VC0.8(1 1 0): a scanning tunneling microscopy analysis

Scanning tunnelling microscopy (STM) was used to study the (1 1 0) surface of a VC_0.8 sample. The surface shows a missing-row reconstruction, i.e., a grating structure with ridges and valleys oriented along the [0 0 1] direction and (1 0 0) and (0 1 0) facets. We did not find unreconstructed (1 1 0) terraces. The regular spacing of the ridges corresponds to a periodicity of (3 × 1) or (4 × 1), depending on preparation, presumably related to different concentrations of carbon vacancies. In the STM images, we can also observe apparent pairing of atoms in the rows, leading to the larger c(6 × 2) and (4 × 2) superstructure cells, which also show up in LEED. We attribute these additional periodicities to ordering of carbon vacancies in the surface rows.