Catalytic oxidation of carbon nanotubes with noble metal nanoparticles

Catalytic oxidation of multi-walled carbon nanotubes (MWNCTs) with some noble metal nanoparticles was observed by environmental transmission electron microscopy (E-TEM). Amoeba-like movement of the nanoparticles was observed even at a temperature of ∼400 °C, which is much lower than the melting points of any of the metals. In particular, rhodium particles reacted intensely with MWCNTs, and assumed a droplet-like shape. On the other hand, gold particles caused very little erosion of the MWCNTs under the conditions of this study.     

Functionalization of carbon nanotubes with silver clusters

In this paper, an advanced method of one-step functionalization of single and multi walled carbon nanotubes (SWCNTs and MWCNTs) using γ-irradiation was described. Two synthesis procedures, related with different reduction species, were employed. For the first time, poly(vinyl alcohol) PVA is successfully utilized as a source to reduce silver (Ag) metal ions without having any additional reducing agents to obtain Ag nanoparticles on CNTs. The decoration of carbon nanotubes with Ag nanoparticles takes place through anchoring of (PVA) on nanotube's surface. Optical properties of as-prepared samples and mechanism responsible for the functionalization of carbon nanotubes were investigated using UV-vis and FTIR spectroscopy, respectively. Decorated carbon nanotubes were visualized using microscopic techniques: transmission electron microscopy and scanning tunneling microscopy. Also, the presence of Ag on the nanotubes was confirmed using energy dispersive X-ray spectroscopy. This simple and effective method of making a carbon nanotube type of composites is of interest not only for an application in various areas of technology and biology, but for investigation of the potential of radiation technology for nanoengineering of materials.     

Effective, fast, and low temperature encapsulation of fullerene derivatives in single wall carbon nanotubes

High filling of single wall nanotubes (SWCNTs) with the typical exohedrally functionalized fullerene derivative of C₆₀N-methyl-3,4-fulleropyrrolidine C₆₀-C₃NH₇ is reported at the temperature of refluxing hexane. The new peapod material is characterized by STM (scanning tunneling microscopy), TEM (transmission electron microscopy) and Raman spectroscopy. Atomically resolved STM scans on SWCNT show no excessive defects or sidewall functionalization as a result of this treatment. The radial breathing mode (RBM) mode of SWCNT at 165 cm⁻¹ becomes weaker and shifted to 169 cm⁻¹ indicating filled nanotubes. TEM studies show bundles of SWCNT are highly filled with derivative C₆₀-C₃NH₇ and form the (C₆₀-C₃NH₇)_n peapods. Individual pyrrolidine-type functional groups attached to the fullerene cages are unambiguously visualized by a lower-dose observation.     

Assembly of single-walled carbon nanotubes on patterns of Au nanoparticles

We report on the assembly of single-walled carbon nanotubes (SWNTs) and gold nanoparticles (NPs) hybrid structure without any surface modification of SWNTs on patterns of Au nanoparticles (NPs). Microscale Au NP patterns were created on composite self-assembled monolayer (SAM) templates of octadecanethiol (ODT) and octanedithiol (OD) through self-assembly of Au NPs via the thiol-Au chemical bond onto the OD region. On such templates, we observed extensive adhesion and strong affinity of SWNTs on the Au NPs and no SWNT on ODT. We also examined systematically the adhesion of SWNTs on ODT with varying coverage of vapour-deposited Au. We observed little SWNT attachment even when there are high-density of Au clusters on the ODT SAM. Extensive adhesion of SWNTs is observed only when the coverage of ODT by Au is almost complete. Dynamic contact angle measurements of dichlorobenzene on the ODT/Au substrates revealed a direct correlation between the surface wettability and the SWNT assembly on a molecular template.     

Magnetization of carbon nanotubes

For narrow-gap carbon nanotubes, the curvature effect due to the misorientation of 2p_z orbitals dominates over electronic structures and thus magnetic properties. It significantly changes magnetization and magnetic susceptibility, and creates special structures in them. There exists a critical field direction in changing magnetism. The critical angle strongly depends on the chiral angle, the nanotube radius, and the temperature. One-dimensional carbon nanotubes are quite different from zero-dimensional carbon tori, such as in terms of special structures in magnetization, the strength of the magnetic response, and the critical angle.     

A facile strategy for covalent binding of nanoparticles onto carbon nanotubes

This paper describes a simple strategy for covalently attaching nanoparticles onto the carbon nanotubes (CNTs) to fabricate hybrid nanostructure. Densely distributed magnetite nanoparticles (MNPs) with a size of 8 nm have been deposited on the surface of carbon nanotubes by covalent interaction. Transmission electron microscopy (TEM), FT-IR spectroscopy, and X-ray diffraction (XRD) analysis have been used to study the formation of MNP/CNT nanostructure. The strategy employed herein is quite generic and applicable to a variety of nanoparticles, including metal, quantum dot and oxide. These composite nanostructures should open up new possibilities in areas such as nanoelectronics, chemical sensing, field-emission displays, nanotribology, and cell adhesion/biorecognition investigations.     

Terahertz applications of carbon nanotubes

We formulate and justify several proposals utilizing unique electronic properties of carbon nanotubes for a broad range of applications to THz optoelectronics, including THz generation by hot electrons in quasi-metallic nanotubes, frequency multiplication in chiral-nanotube-based superlattices controlled by a transverse electric field, and THz radiation detection and emission by armchair nanotubes in a strong magnetic field.     

Synthesis and characterization of carbon nanotubes on carbon microfibers by floating catalyst method

In this paper, carbon nanotubes were synthesized on carbon microfibers by floating catalyst method with the pretreatment of carbon microfibers at the temperature of 1023 K, using C₂H₂ as carbon source and N₂ as carrier gas. The morphology and microstructure of carbon nanotubes were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The composition of carbon nanotubes was determined by energy dispersive X-ray spectroscopy (EDX). The results showed that the surface of treated carbon microfibers was thickly covered by carbon nanotubes with diameters of about 50 nm. EDX image indicated that the composition of carbon nanotubes was carbon. In comparison with the sample grown on untreated carbon microfibers surface, it was found that after carbon microfibers were boiled in the solution of sulfur acid and nitric acid (VH₂SO₄:VHNO₃ = 1:3) and immersed in the solution of iron nitrate and xylene, carbon nanotubes with uniform density can be grown on carbon microfibers surface. Based on the results, we concluded that the pretreatment of carbon microfibers had great effect on the growth of carbon nanotubes by floating catalyst method.     

Aligned carbon nanotubes catalytically grown on iron-based nanoparticles obtained by laser-induced CVD

Iron-based nanoparticles are prepared by a laser-induced chemical vapor deposition (CVD) process. They are characterized as body-centered Fe and Fe₂O₃ (maghemite/magnetite) particles with sizes ≤5 and 10 nm, respectively. The Fe particles are embedded in a protective carbon matrix. Both kind of particles are dispersed by spin-coating on SiO₂/Si(1 0 0) flat substrates. They are used as catalyst to grow carbon nanotubes by a plasma- and filaments-assisted catalytic CVD process (PE-HF-CCVD). Vertically oriented and thin carbon nanotubes (CNTs) were grown with few differences between the two samples, except the diameter in relation to the initial size of the iron particles, and the density. The electron field emission of these samples exhibit quite interesting behavior with a low turn-on voltage at around 1 V/μm.     

One-pot synthesis of one-dimensional array Pt nanoparticles on carbon nanotubes via a facile microwave polyol method

High-density attachment and one-dimensional array Pt nanoparticles (NPs) on carbon nanotubes (CNTs) to generate Pt/CNTs heterostructures are obtained via one-pot microwave polyol method. The morphology, composition of as-obtained Pt/CNTs heterostructures is characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD). The Raman spectrum and Fourier transform infrared (FTIR) spectrum show the introduction of defects or functional groups on CNTs surface, which are crucial factors to assist the nucleation and growth of Pt NPs along the skeleton of CNTs.     

High catalytic performance of Pt nanoparticles on plasma treated carbon nanotubes for electrooxidation of ethanol in a basic solution

Nanosized Pt particles deposited on plasma treated multi-walled carbon nanotubes have been used in electrocatalytic oxidation of ethanol in a basic solution. These Pt nanoparticles have very narrow size distribution and exhibit significant higher catalytic activities, higher Pt utilization efficiency (93.77%) and improved durability in comparison to the commercial available Johnson Matthey Pt/C catalyst.     

Preparation of carbon nanosheets deposited on carbon nanotubes by microwave plasma-enhanced chemical vapor deposition method

Carbon nanosheets were synthesized by microwave plasma-enhanced chemical vapor deposition method on carbon nanotubes substrate which was treated by hydrogen plasma. The results showed that the diameters of carbon nanotubes first got thick and then “petal-like” carbon nanosheets were grown on the outer wall of carbon nanotubes. The diameters of carbon nanotubes without and with carbon nanosheets were 100-150 and 300-500 nm, respectively. Raman spectrum indicated the graphite structure of carbon nanotubes/carbon nanosheets. The hydrogen plasma treatment and reaction time greatly affected the growth and density of carbon nanosheets. Based on above results, carbon nanosheets/carbon nanotubes probably have important applications as cold cathode materials and electrode materials.     

不同氮掺杂浓度碳纳米管的制备及其成键特性分析

采用化学气相沉积法,以吡啶为氮源,乙炔为碳源,制备出了不同氮掺杂含量的碳纳米管.使用透射电子显微镜(TEM)和X射线荧光光谱(XPS)对样品的形貌和成键特性进行了观察和分析.TEM测试发现随着掺杂量的增大,氮掺杂碳纳米管的竹节长度从120 nm减小为40 nm左右,同时管身变得更加弯曲,管壁变得粗糙.XPS测试发现氮元素在碳纳米管中以“吡啶”、“吡咯”和“石墨”三种C—N键合方式存在.结合三种价键的形成原因,分析了氮掺杂浓度对键合形式的影响,并根据价键的存在形式解释了碳纳米管形貌变化的原因. 关键词： 碳纳米管 氮掺杂 XPS     

Field emission characteristics of screen-printed carbon nanotubes cold cathode by hydrogen plasma treatment

Selective plasma etching and hydrogen plasma treatment were introduced in turn to improve field emission characteristics of screen-printed carbon nanotubes (CNTs) cold cathode, which was prepared by using slurry of mixture of multi-wall CNTs, organic vehicles and inorganic binder, i.e. silicon dioxide sol. The results show that selective plasma etching process could effectively remove parts of surface inorganic vehicle (SiO₂) layer and expose more smooth and clean CNTs on cathode surface, which could significantly decrease the operating field of CNTs cathode. There are some nanoparticles emerging on the out of CNTs wall after hydrogen plasma treatment, which are equivalent to increase field emission point of cathode. At the same time, these nanoparticles can increase the local electric field of CNTs, which can decrease operating voltage of CNTs cathode and improve uniformity field emission.     

Improve the field emission uniformity of carbon nanotubes treated by ball-milling process

Carbon nanotubes (CNTs) deposited by chemical vapor deposition (CVD) were treated by ball milling. The morphologies and field emission properties of the treated CNTs depending on milling time were studied. The emission turn-on field is increased, and the field emission current density is reduced, when the milling time increased from 0.5 to 3 h. The as-deposited long CNTs were cut to short CNTs (∼1 h) and micro-particles (>1 h) with increasing of the milling time. It is found that the optimized milling time is 0.5-1 h, the treated CNTs showed excellent field emission properties, such as low turn-on field, high emission current density and uniform luminescence spots distribution.     

Multiwall carbon nanotubes synthesized by RF-CCVD on novel CaO supported catalysts

Multiwall carbon nanotubes were synthesized on the FeCoCaO and FeMoCaO catalysts by RF-CCVD at 750 °C, 850 °C and 950 °C, using acetylene as the carbon source. Analytically, it was found that the nanotubes are well crystallized, with outside diameters ranging between 10 and 60 nm and a ratio of the outside to the inside diameters of 2 to 3. The nanotubes did not present amorphous carbon and their purity increased with the temperature of synthesis. A relatively large number of metallic nanoparticles of various dimensions and shapes encapsulated inside the nanotubes were observed by TEM in most of the nanotube samples.     

碳纳米管负载矾的第一性原理研究

本文基于密度泛函第一性原理研究了原始和带有缺陷的(Stone-Wales缺陷和单空位缺陷)碳纳米管负载金属V的稳定构型.对于V吸附在原始碳纳米管(CNT)上时,V在内表面的吸附比外表面的吸附有更强的相互作用力,且六元环内表面结构最稳定.当V与Stone-Wales缺陷碳纳米管相互作用时,V原子易吸附在管外七元环C-C键的外表面和内表面处,这说明缺陷位置的有效结合使之局域化加强.而以单空位缺陷碳纳米管为载体时V最易吸附在外缺陷处,相当于碳纳米管的一个C被金属V原子取代,形成了3个V-C_(sur)键,这进一步表明SV管外吸附比管内吸附更容易.我们从上述三种构型载体中发现,金属V吸附在缺陷碳纳米管时的稳定性要优于原始碳纳米管,且SV缺陷对金属V的固定效果最好.     

Damping of electron Zitterbewegung in carbon nanotubes

Zitterbewegung (ZB, trembling motion) of electrons in semiconductor carbon nanotubes is described taking into account dephasing processes. The density matrix formalism is used for the theory. Differences between decay of ZB oscillations due to electron localization and that due to dephasing are discussed.