Chemisorption of 1,1-dichloroethene on the Si(1 1 1)-7 × 7 surface

Chemisorption of 1,1-dichloroethene (Cl₂CCH₂) to a Si(1 1 1)-7 × 7 surface was studied by means of X-ray photoelectron spectroscopy using synchrotron radiation, recording chlorine 2p and carbon 1s spectra. For carbon 1s, spectral assignment of the chemisorbed species is based on quantum chemical calculations of chemical shifts in model compounds.The results confirm the identity of covalently bonded 1-chlorovinyl (-CClCH₂) and vinylidene (CCH₂) adspecies. Upon chemisorption at room temperature it was found that about one-third of the molecules break one C-Cl bond while about two-thirds of the adsorbates break two C-Cl bonds. We do not, however, find evidence for isomerization of CCH₂ to di-bonded vinylene (-CHCH-).     

Reaction of acetonitrile with the silicon(0 0 1) surface: A combined XPS and FTIR study

The adsorption of acetonitrile on the Si(0 0 1) surface has been investigated using X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). XPS and FTIR spectra indicate that adsorbed acetonitrile forms two correlated binding configurations, a CN species with a strong FTIR absorption at 1540 cm⁻¹ and a CCN (ketenimine) species that has a very strong FTIR absorption at 1952 cm⁻¹. The CCN FTIR peak at 1952 cm⁻¹ shows a striking polarization dependence, with the infrared transition dipole almost entirely in the plane of the sample and parallel to the SiSi dimer axis. Our data suggests that the primary CCN structure results from cleavage of two C-H bonds, forming a structure in which the N and terminal C atom are both linked to the surface. Temperature-dependent experiments help to elucidate the complicated reaction mechanism for acetonitrile adsorbing onto the Si(0 0 1) surface. Dosing at higher temperature increases the amount of CCN relative to CN species while heating leads to direct transformation of the CN to the CCN species. Our results indicate that previous studies, which considered only products formed by cleavage of a single C-H bond, have misidentified the primary ketenimine product. A reinterpretation of the earlier results, combined with data presented here, sheds new light onto the products and mechanism of interaction of acetonitrile with Si(0 0 1).     

DFT calculations of XPS/NEXAFS and IR spectra to elucidate the reaction products of acetonitrile with Si(0 0 1)-2 × 1

NEXAFS data [S. Rangan et al., Phys. Rev. B 71 (2005) 165319] and FTIR data [M.P. Schwartz, R.J. Hamers, Surf. Sci. 601 (2007) 945] apparently do not converge in the identification of the reaction products of acetonitrile (CH₃CN) with Si(0 0 1)-2 × 1 at room temperature. Using DFT calculations of core-excited/core-ionized spectra and of IR vibrational frequencies and intensities, we show the consistency of the body of experimental data. Three species are present on the surface in equivalent amounts, a CN moiety, a pendent CN and a CCN ketenimine submitted to a strong twist imposed by the Si bond directionality. More generally, the paper shows the usefulness of spectroscopic data simulations in the elucidation of complex surface chemistry problems.     

The chemistry of C2 perfluoroalkyl iodide on the Cu(1 1 1) single crystal surface

The thermal chemistry of perfluoroethyl iodide (C₂F₅I) adsorbed on Cu(1 1 1) has been investigated by temperature-programmed reaction/desorption (TPR/D), reflection-absorption infrared spectroscopy (RAIRS), and X-ray photoelectron spectroscopy (XPS). I 4d and F 1s XPS spectra show that dissociative adsorption of C₂F₅I to form the surface-bound perfluroethyl (Cu-C₂F₅) moieties occurs at very low temperature (T < 90 K), while the C-F bond cleavage in adsorbed perfluroethyl (Cu-C₂F₅) begins at ca. 300 K. XPS and TPR/D studies further reveal that the reactions of ^βCF₃^αCF_2(ad) on Cu(1 1 1) are strongly dependent on the surface coverage. At high coverages (?0.16 L exposure), the adsorbed perfluroethyl (Cu-C₂F₅) evolves, via α-F elimination, into the surface-bound tetrafluoroethylidene moieties (CuCF-CF₃) followed by a dimerization step to form octafluoro-2-butene (CF₃CFCFCF₃) at 315 K as gas product. The surface-bound (Cu-C₂F₅) decomposes preferentially, at low coverages (?0.04 L), via consecutive α-F abstraction to afford intermediate, trifluoroethylidyne (CuCCF₃), resulting in the final coupling reaction to yield hexafluoro-2-butyne (CF₃CCCF₃) at 425 K. However, at middle coverages (ca. 0.08-0.16 L exposure), the adsorbed perfluroethyl (Cu-C₂F₅) first experiences an α-F elimination and then prefers to loss the second F from β position to yield the intermediate of Cu-CF₂-CFCu (μ-η,η-perfluorovinyl), which may further evolve into hexafluorocyclobutene (CF₂CFCFCF₂) at 350 K through cyclodimerization reaction. Our results have also shown that the surface reactions to yield the products, CF₃CFCFCF₃ and CF₃CCCF₃, obey first-order kinetics, whereas the formation of CF₂CFCFCF₂ follows second-order kinetics.     

Selective surface chemistry of allyl alcohol and allyl aldehyde on Si(1 0 0)2×1: Competition of [2 + 2] CC cycloaddition with O-H dissociation and with [2 + 2] CO cycloaddition in bifunctional molecules

Competition between the CC functional group with the OH group in allyl alcohol and with the CO group in allyl aldehyde in the adsorption and thermal chemistry on Si(1 0 0)2×1 has been studied by X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD), as well as density-functional theory (DFT) calculations. The similarities found in the C 1s and O 1s spectra for both molecules indicate that the O-H dissociation product for allyl alcohol and [2 + 2] CO cycloaddition product for allyl aldehyde are preferred over the corresponding [2 + 2] CC cycloaddition products. Temperature-dependent XPS and TPD studies further show that thermal evolution of these molecules gives rise to the formation of ethylene, acetylene, and propene on Si(1 0 0)2×1, with additional CO evolution only from allyl alcohol. The formation of these desorption products also supports that the [2 + 2] CC cycloaddition reaction does not occur. In addition, the formation of SiC at 1090 K is observed for both allyl alcohol and allyl aldehyde. We propose plausible surface-mediated reaction pathways for the formation of these thermal evolution products. The present work illustrates the crucial role of the Si(1 0 0)2×1 surface in selective reactions of the Si dimers with the O−H group in allyl alcohol and with the CO group in allyl aldehyde over the CC functional group common to both molecules.     

Hydrogen related point defects in silicon based layers: Si(·)H and SiOOH

Layers prepared by pulsed TEA CO₂ pulsed laser ablation (PLA) of SiO and SiO₂ targets in helium were exposed to hydrogen and deuterium atmosphere up to several kPa. The deposited layers were investigated by FTIR, EPR and XP spectroscopy. Among various Si species silyl radical Si(·)H (Si(·)D) at 2166 (1568) cm⁻¹—H(I) center—and silyl hydroperoxide SiOOH (SiOOD) at 3587 (2648) cm⁻¹ were identified in FTIR spectra. Chemical pathways for production of these species are discussed. Experimental results are supported by quantum chemical calculations.     

Ab initio studies of electronic spectra of the linear aluminum-bearing carbon chains AlC2nH (n = 1-5)

Geometries and stabilities of the linear aluminum-bearing carbon chains AlC_2nH (n = 1-5) in their ground states have been explored by the DFT-B3LYP and RCCSD(T) methods. Structures of the X¹Σ⁺ and 1¹Π electronic states have also been optimized by the CASSCF approach. The studies indicate that these species have single-triple bond alternate pattern, AlCCCC?CCH, and the electronic excitation from X¹Σ⁺ to 1¹Π leads to the shortening of the AlC bonds. The vertical excitation energies of the 1¹Π ← X¹Σ⁺ and 2¹Π ← X¹Σ⁺ transitions for AlC_2nH (n = 1-5) have been investigated by the CASPT2, EOM-CCSD, and TD-B3LYP levels of theory with the cc-pVTZ basis set, respectively. CASPT2-predicted 1¹Π ← X¹Σ⁺ transition energies are 3.57, 3.44, 3.33, 3.26, and 3.21 eV, respectively. For AlC₂H, our estimate agrees very well with the experimental value of 3.57 eV. In addition, the AlC bond dissociation energies and the exponential-decay curves for these vertical excitation energies are also discussed.     

Surface reactions of 2-iodopropane on GaAs(1 0 0)

The surface reactions of 2-iodopropane ((CH₃)₂CHI) on gallium-rich GaAs(1 0 0)-(4 × 1), was studied by temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS). CH₃CHICH₃ adsorbs molecularly at 120 K but dissociates below room temperature to form chemisorbed 2-propyl ((CH₃)₂CH) and iodide (I) species. Thermal activation causes desorption of the molecular species at 240 K, and this occurs in competition with the further reactions of the (CH₃)₂CH and I chemisorbed species. Self-coupling of the (CH₃)₂CH results in the formation of 2,3-dimethylbutane ((CH₃)₂CH-CH(CH₃)₂) at 290 K. β-Hydride elimination in (CH₃)₂CH yields gaseous propene (CH₃CHCH₂) at 550 K while reductive elimination reactions of (CH₃)₂CH with surface hydrogen yields propane (CH₃CH₂CH₃) at 560 K. Recombinative desorption of the adsorbed hydrogen as H₂ also occurs at 560 K. We observe that the activation barrier to carbon-carbon bond formation with 2-propyls on GaAs(1 0 0) is much lower than that in our previous investigations involving ethyl and 1,1,1-trifluoroethyl species where the β-elimination process was more facile. The difference in the surface chemistry in the case of 2-propyl species is attributable to its rigid structure resulting from the bonding to the surface via the second carbon atom, which causes the methyl groups to be further away from the surface than in the case of linear ethyl and 1,1,1-trifluoroethyl species. The β-hydride and reductive elimination processes in the adsorbed 2-propyl species thus occurs at higher temperatures, and a consequence of this is that GaI desorption, which is expected to occur in the temperature range 550-560 K becomes suppressed, and the chemisorbed iodine leaves the surface as atomic iodine.     

Electronic and geometric structure of methyl oxirane adsorbed on Si(1 0 0)2 × 1

Electronic and geometric properties of the adsorbate-substrate complex formed upon adsorption of methyl oxirane on Si(1 0 0)2 × 1 at room temperature is reported, obtained with synchrotron radiation-induced valence and core-level photoemission. A ring-opening reaction is demonstrated to occur, followed by a five-membered ring formation involving two of the Si surface atoms bound to a surface dimer. Core-level photoemission spectra support the ring-opening reaction and the SiO and SiC bond formation, while from the valence spectra a more extended molecular fragmentation can be ruled out. We discuss the most likely geometry of the five-membered ring.     

Improvement of photoluminescence properties of porous silicon by silica passivation

Porous silicon (PS) was passivated by silica film using a sol-gel method; the photoluminescence (PL) properties were significantly improved; namely, PL intensity and stability increased and PL peak shifted to shorter wavelength. Scanning electron microscope (SEM) and Fourier transformed infrared spectroscope (FTIR) results indicated that silica passivation produced a compact film on the PS surface and modified the surface state of PS. The number of stable surface bonds (HSiO₃, HSiSiO₂ and H₂SiO₂) increased due to the oxidation of SiH back-bonds during the gelation process, and thus the PL intensity and stability were improved. Moreover, the blue-shift of PL peak was determined due to the increase in the ratio of SiO/SiH.     

Conformational isomers of stilbene on Si(1 0 0)

Stilbene (1,2-diphenylethylene) has shown an intriguing isomerisation behavior and may serve as a model system for “molecular switches” incorporating a CC double bond. To evaluate the possible use of such molecules as molecular switches on semiconductor surfaces, the adsorption of cis- and trans-stilbene on Si(1 0 0) has been investigated. Identification of both isomers is achieved by differences in adsorption geometry as revealed by NEXAFS, and differences in electronic structure in the occupied and unoccupied molecular orbitals. For both isomers, bonding takes place via the CC double bond to the Si dimer atoms allowing for free movement of the aromatic rings, a necessary prerequisite for photoinduced isomerisation on the surface. Our experimental results agree well with theoretical calculations.     

Alkali adsorption on Ni(1 1 1) and their coadsorption with CO and O

The adsorption of alkalis (Na, K) on Ni(1 1 1) and their coadsorption with CO and O were studied by high-resolution electron energy loss spectroscopy. Loss measurements of clean alkali adlayers provided the expected behaviour of the alkali-substrate vibration energy as a function of the alkali coverage. This result was achieved by eliminating any trace of CO contamination from the alkali adlayer. As a matter of fact, a significant softening of the alkali-Ni vibration energy was revealed in the alkali + CO coadsorbed phase. Moreover, alkali coadsorption with oxygen caused a weakening of the ONi bond and a strengthening of the alkaliNi bond.     

Chemistry of Alanine on Pd(1 1 1): Temperature-programmed desorption and X-ray photoelectron spectroscopic study

The adsorption of alanine is studied on a Pd(1 1 1) surface using X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD). It is found that alanine adsorbs into the second and subsequent layers prior to completion of the first monolayer for adsorption at ∼250 K, while at ∼300 K, alanine adsorbs almost exclusively into the first monolayer with almost no second-layer adsorption. Alanine adsorbs onto the Pd(1 1 1) surface in its zwitterionic form, while the multilayer contains about 30-35% neutral alanine, depending on coverage. Alanine is thermally stable on the Pd(1 1 1) surface to slightly above room temperature, and decomposes almost exclusively by scission of the CCOO bond to desorb CO₂ and CO from the COO moiety, and the remaining fragment yields ethylamine and HCN.     

Benzene and NO on a Ru(0 0 1) surface: Electronic structure and bonding

We have theoretically studied the co-adsorption of benzene and NO on a Ru surface. The calculations were performed using the atom superposition and electron delocalisation-tight-binding (ASED-TB) method. We have modelled the Ru(0 0 1)-p(3 × 3)-4C₆D₆ + 2NO co-adsorbed layer from experimental data.We have confirmed that the more stable sites are hcp on the Ru for both benzene and NO co-adsorbates.The NO states are more stabilized in the co-adsorbed system. There is more bonding between RuN than RuC. We have described an important interaction of on H (from benzene) and the O (from a close NO). That results explain previous experimental reports and confirm suggested direct interaction.     

Chemistry of l-proline on Pd(1 1 1): Temperature-programmed desorption and X-ray photoelectron spectroscopic study

The surface chemistry of proline is explored on Pd(1 1 1) using a combination of temperature-programmed desorption (TPD) and X-ray photoelectron spectroscopy. Proline adsorbs on Pd(1 1 1) at temperatures of 250 K and below into second and subsequent layers prior to the saturation of the first layer, where approximately 70% of the adsorbed proline is present in its zwitterionic form. Molecular proline desorbs between ∼315 K and ∼333 K depending on coverage. When adsorbed at ∼300 K, only the first monolayer is formed, and the proline is present as zwitterions, oriented such that all of the carbons are detected equally by XPS. Proline decomposes by scission of the C-COO bond, where the carboxylate moiety desorbs as carbon monoxide and carbon dioxide, while the nitrogen-containing moiety desorbs as to HCN, and evolves pyrrole at ∼390 K, pyrrolidine at ∼410 K, and final species that desorbs at ∼450 K that cannot be unequivocally assigned but may be 2-butenenitrile (CH₃-CHCH-CN), 3-butenenitrile (CH₂CH-CH₂-CN), 2-methyl-2-propenenitrile (CH₂C(CH₃)-CN) or cyclopropanecarbonitrile.     

Magnesia formed on calcination of Mg(OH)2 prepared from natural bischofite

Calcination of magnesium hydroxide, which was prepared from natural bischofite MgCl₂·6H₂O, leading to dehydration 2(MgOH) → MgOMg + H₂O, is accompanied by transition of phase not only to MgO but also to MgO_x at x < 1 (assigned to Mg₄O₃) at moderate temperatures. At higher temperatures, MgO_x is completely transformed into MgO. Magnesium hydroxide and oxide heated at different temperatures were studied using the TEM, XRD, IR, PCS, TG-DTA, nitrogen and argon adsorption methods. The electronic structure of MgO and Mg₄O₃ was studied using the ab initio quantum chemical method with periodic conditions. According to TEM images, the morphology of particles changing from Mg(OH)₂ laminae to aggregates of interpenetrated MgO cubelets and foils depend strongly on the calcination temperature. Significant changes in surface area are observed mainly at 325-470 °C on desorption of a major portion of eliminated water corresponding to 28.4 wt.% at its total amount of 30.9 wt.%. Pore size distribution (PSD) is sensitive to treatment conditions and the main PSD peaks shift towards larger pore size with elevating temperature. The characteristics of the surface hydroxyls as well as of the bulk MgO bonds depend on heating conditions, as noticeable changes are observed in the XRD patterns and the IR spectra of the samples undergoing the mentioned transformation of phase Mg(OH)₂ → MgO_x → MgO.     

Near infrared spectroscopy of organic acids: comparing OH and CH oscillator frequencies and intensities

This work investigates the vibrational spectroscopy of a series of organic acids, CH₃(CH₂)_nCOOH (n = 1-5), previously unobserved in the IR and near-IR (2000-15 000 cm⁻¹). The work obtains frequencies and relative intensities for all OH and CH stretching transitions. Comparison of the frequencies and intensities of CH and OH stretching transitions reveal interesting trends in acid chain length that are discussed. Literature values for acetic acid (CH₃COOH) and formic acid (HCOOH) are used to gain a broader understanding for the spectroscopy of the organic acids CH₃(CH₂)_nCOOH. The observation of several combination bands involving the CH and OH stretching vibrations and possible rotational isomer and hot band transitions are reported.     

A theoretical study of c-C5H8 adsorption on Ge (0 0 1)-2 × 1 and on dimer vacancies on the surface: Electronic structure and bonding

In this work we analyzed the geometry and the chemical interactions for c-C₅H₈ adsorption on Ge (0 0 1), using density functional theory calculations (DFT). We examined the changes in the atomic interactions using a slab model. We considered two cases, the cyclopentene adsorption on Ge(0 0 1) and on dimer vacancies on the surface. We found an average distance H-Ge, -C-Ge and C-Ge of 1.50, 1.70 and 1.65 Å, respectively, on dimer vacancies; and an average C-Ge distance of 2.05 Å on Ge-Ge dimer. We also computed the density of states (DOS) and the DOS weighted overlap populations (OPDOS) corresponding to C-C, C-Ge, C-H, and Ge-Ge bonds. During adsorption the main contribution are the CC double bond in both cases, and the next C and the H's belonging to this bonds in the case of adsorption on dimer vacancies. The orbital contribution includes participation of the 2p_y and 2p_z orbitals corresponding to unsaturated C atoms, 2p_z corresponding to side saturated C, and the 4p orbitals of Ge for the adsorption on dimer vacancies; 2s and 2p_z orbitals corresponding to double bond C atoms, 4s and 4p_z orbitals of Ge for the adsorption on Ge(0 0 1).     

Influence of thermal treatment of low dielectric constant SiOC(H) films using MTES/O2 deposited by PECVD

Low dielectric constant SiOC(H) films are deposited on p-type Si(100) substrates by plasma enhanced chemical vapor deposition (PECVD) using methyltriethoxysilane (MTES, C₇H₁₈O₃Si) and oxygen gas as precursors. The SiOC(H) films are deposited at room temperature, 100, 200, 300 and 400 °C and then annealed at 100, 200, 300 and 400 °C temperatures for 30 min in vacuum. The influence of deposition temperature and annealing on SiOC(H) films are investigated. Film thickness and refractive index are measured by field emission scanning electron microscopy and ellipsometry, respectively. Chemical bonding characteristics of as-deposited and annealed films are investigated by Fourier transform infrared (FTIR) spectroscopy in the absorbance mode. As more carbon atoms are incorporated into the SiOC(H) films, both film density and refractive index are decreased due to nano pore structure of the film. In the SiOC(H) film, CH₃ group as an end group is introduced into OSiO network, thereby reducing the density to decrease the dielectric constant thereof. The dielectric constant of SiOC(H) film is evaluated by C-V measurements using metal-insulator-semiconductor (MIS), Al/SiOC(H)/p-Si structure and it is found to be as low as 2.2 for annealed samples deposited at 400 °C.     

Low temperature catalytic performance of nanosized TiNiO for oxidative dehydrogenation of propane to propene

Nanosized TiNiO catalysts prepared by a modified sol-gel method have been investigated in the oxidative dehydrogenation of propane (ODP) to propene. At 300 °C the yield to propene of 12.1% was obtained on 9.1 wt.% TiNiO catalyst with the selectivity of 43%. The continued variety of lattice parameter and variation of chemical value of nickel and titanium ion on the surface indicates that there are strong interactions of TiO₂ and NiO. The decreased low temperature oxygen desorption and the weaker reducibility seems to be responsible for the decreased activity and enhanced selectivity of propane oxidative dehydrogenation over TiNiO catalysts.