Dynamics of molybdenum nano structure formation on the TiO2(1 1 0) surface: A kinetic Monte Carlo approach

The rutile TiO₂(1 1 0) surface is a highly anisotropic surface exhibiting “channels” delimited by oxygen rows. In previous experimental and theoretical DFT works we could identify the molybdenum adsorption sites. They are located inside the channels. Moreover, experimental studies have shown that during subsequent annealing after deposition, special molybdenum nano structures can be formed, especially two monolayer high pyramidal chains of atoms.In order to better understand the dynamics of nano structure formation, we present a kinetic Monte Carlo study on diffusion and adsorption of molybdenum atoms on a TiO₂(1 1 0) surface. A quasi one-dimensional lattice gas model has been used which describes the possible adsorption sites of a Mo atom in a single channel of the surface. The atomic positions of a 1.5 monolayer thick Mo film formed of pyramidal chains define the lattice sites of the model. Thereby the formation of three-dimensional clusters could be studied. Here we have studied the cluster formation as a function of parameters that can be controlled in a growth experiment by physical vapor deposition: deposition and annealing temperature, flux and total amount of deposited Mo. Good qualitative agreement with recent experiments is obtained.     

Formamide reactions on rutile TiO2(0 1 1) surface

The reaction of formamide over the (0 1 1) faceted TiO₂(0 0 1) surface has been studied by Temperature Programmed Desorption (TPD) and X-ray Photoelectron Spectroscopy (XPS). Two main reactions were observed: dehydration to HCN and H₂O and decomposition to NH₃ and CO. The dehydration reaction was found to be three to four times larger than the decomposition at all coverages. Each of these reactions is found to occur in two temperature domains which are dependent upon surface coverage. The low temperature pathway (at about 400 K) is largely insensitive to surface coverage while the high temperature pathway (at about 500 K) shifts to lower temperatures with increasing surface coverage. These two temperature pathways may indicate two adsorption modes of formamide: molecular (via an η¹(O) mode of adsorption) and dissociative (via an η²(O,N) mode of adsorption). C1s and N1s XPS scans indicated the presence of multiple species after formamide absorption at 300 K. These occurred at ca. 288.5 eV (-CONH-) and 285 eV (sp³/sp² C) for the C1s and 400 eV-(NH₂), 398 eV (-NH) and 396 eV (N) for the N1s and result from further reaction of formamide with the surface.     

Au/TiO2/Ru(0 0 0 1) model catalysts and their interaction with CO

Au/TiO₂/Ru(0 0 0 1) model catalysts and their interaction with CO were investigated by scanning tunneling microscopy and different surface spectroscopies. Thin titanium oxide films were prepared by Ti deposition on Ru(0 0 0 1) in an O₂ atmosphere and subsequent annealing in O₂. By optimizing the conditions for deposition and post-treatment, smooth films were obtained either as fully oxidized TiO₂ or as partly reduced TiO_x, depending on the preparation conditions. CO adsorbed molecularly on both oxidized and reduced TiO₂, with slightly stronger bonding on the reduced films. Model catalyst surfaces were prepared by depositing submonolayer quantities of Au on the films and characterized by X-ray photoelectron spectroscopy and scanning tunneling microscopy. From X-ray photoelectron spectroscopy, a weak interaction between the Au and the TiO₂ substrate was found. At 100 K CO adsorption occurred on both the TiO₂ film and on the Au nanoparticles. CO desorbed from the Au particles with activation energies between 53 and 65 kJ/mol, depending on the Au coverage. If the Au deposit was annealed to 770 K prior to CO exposure, the CO adsorption energy decreased significantly. STM measurements revealed that the Au particles grow upon annealing, but are not encapsulated by TiO_x suboxides. The higher CO adsorption energy observed for smaller Au coverages and before annealing is attributed to a significantly stronger interaction of CO with mono- and bilayer Au islands, while for higher particles, the adsorption energy becomes more bulk-like. The implications of these effects on the known particle size effects in CO oxidation over supported Au/TiO₂ catalysts are discussed.     

Adsorption and decomposition of NO on K-deposited Pd(1 1 1)

The adsorption and decomposition of NO on a K-deposited Pd(1 1 1) surface were investigated using X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, and temperature-programmed desorption. For the K-deposited Pd(1 1 1) surface, two different NO adsorption sites were observed in addition to the Pd site. On the clean Pd(1 1 1) surface, the adsorption of NO was purely molecular and reversible, but on the K-deposited surface, the adsorbed NO decomposed at two different temperatures, 530 and 610 K. These results indicate that the NO adsorption and decomposition sites were newly created by the deposition of K onto the Pd(1 1 1) surface.     

Methanol adsorption on Pd(1 1 0) and Ag/Pd(1 1 0) studied by high-resolution photoelectron spectroscopy

Adsorption of methanol on clean Pd(1 1 0) and on an alloyed Ag/Pd(1 1 0) surface has been studied by high-resolution photoelectron spectroscopy. On Pd(1 1 0) two different chemisorbed methanol species were observed for temperatures up to 200 K, with the one at lower binding energy remaining at low coverage. These species were attributed to methanol adsorbed in two different adsorption sites on the Pd(1 1 0) surface. As is well established for this system, heating to 250 K resulted in decomposition of methanol into CO. The adsorption and decomposition behaviour of methanol on the Ag/Pd(1 1 0) surface alloy formed by depositing Ag on Pd(1 1 0) at elevated temperature was similar to that of the pure Pd(1 1 0) surface. This suggests that the amount of Ag present in the Pd(1 1 0) surface in this study does not affect the decomposition behaviour of methanol as compared to pure Pd(1 1 0). Complementary density functional theory calculations also show little influence of Ag on the binding of methanol to Pd. These calculations predict an on-top adsorption site for low methanol coverages.     

CO2 adsorption on Cr(1 1 0) and Cr2O3(0 0 0 1)/Cr(1 1 0)

We attempt to correlate qualitatively the surface structure with the chemical activity for a metal surface, Cr(1 1 0), and one of its surface oxides, Cr₂O₃(0 0 0 1)/Cr(1 1 0). The kinetics and dynamics of CO₂ adsorption have been studied by low energy electron diffraction (LEED), Aug er electron spectroscopy (AES), and thermal desorption spectroscopy (TDS), as well as adsorption probability measurements conducted for impact energies of E_i = 0.1-1.1 eV and adsorption temperatures of T_s = 92-135 K. The Cr(1 1 0) surface is characterized by a square shaped LEED pattern, contamination free Cr AES, and a single dominant TDS peak (binding energy E_d = 33.3 kJ/mol, first order pre-exponential 1 × 10¹³ s⁻¹). The oxide exhibits a hexagonal shaped LEED pattern, Cr AES with an additional O-line, and two TDS peaks (E_d = 39.5 and 30.5 kJ/mol). The initial adsorption probability, S₀, is independent of T_s for both systems and decreases exponentially from 0.69 to 0.22 for Cr(1 1 0) with increasing E_i, with S₀ smaller by ∼0.15 for the surface oxide. The coverage dependence of the adsorption probability, S(Θ), at low E_i is approx. independent of coverage (Kisliuk-shape) and increases initially at large E_i with coverage (adsorbate-assisted adsorption). CO₂ physisorbs on both systems and the adsorption is non-activated and precursor mediated. Monte Carlo simulations (MCS) have been used to parameterize the beam scattering data. The coverage dependence of E_d has been obtained by means of a Redhead analysis of the TDS curves.     

Room-temperature-adsorption behavior of acetic anhydride on a TiO2(1 1 0) surface

We have studied the adsorption structure of acetic anhydride on a TiO₂(1 1 0) surface using XPS (X-ray photoelectron spectroscopy), LEED (low energy electron diffraction) and HREELS (high resolution electron energy loss spectroscopy) to determine the origins of the unique adsorption properties of carboxylic acids on a TiO₂(1 1 0) surface. The C 1s XPS data indicated that the saturation carbon amount of adsorbed acetic anhydride was 12 ± 3% larger than that of the adsorbed acetic acid. LEED showed p(2 × 1) weak spots for the acetic anhydride adsorbed surface. The HREELS spectra revealed the dissociative adsorption of acetic anhydride. Based on these findings, we concluded that the neutralization of the bridging oxygen atoms associated with the dissociative adsorption is necessary for the stable adsorption of carboxylates on the 5-fold Ti sites.     

Adsorption structure of acetic anhydride on a TiO2(1 1 0) surface observed by scanning tunneling microscopy

The carboxylic acids are stably adsorbed on TiO₂(1 1 0) surfaces at room temperature. To demonstrate the neutralization mechanism proposed by Ashima et al. [H. Ashima, W.-J. Chun, K. Asakura, Surf. Sci. 601 (2007) 1822.] that explains the stable adsorption of carboxylic acids, we studied the full-coverage adsorption structure of acetic anhydride on a TiO₂(1 1 0) surface by STM (scanning tunneling microscopy). We directly observed three postulated species on the TiO₂(1 1 0) surface; normal acetates (termed acetate A) forming a (2 × 1) ordered structure, a minor acetate species (termed acetate B) which was present between the bridging oxygen and the 5-fold Ti, and the oxygen vacancies. We determined the ratio of these three species. This ratio was in good agreement with the postulated conversion reaction of acetate B to A.     

Theoretical study of CO adsorption on the illuminated TiO2 (0 0 1) surface

A quantum modeling of the CO adsorption on illuminated anatase TiO₂ (0 0 1) is presented. The calculated adsorption energy and geometries of illuminated case are compared with the ground state case. The calculations were achieved by using DFT formalism and the BH and HLYP. Upon photoexcitation, an electron-hole pair is generated. Comparing of natural population in the ground state and the exited state, shows that an electron is trapped in a Ti⁴⁺ ion and a hole is localized in an oxygen ion. The photoelectron helps generation of a CO₂ molecule on the TiO₂ surface. As shown by optimization of these systems, the CO molecule adsorbed vertically on the TiO₂ (0 0 1) surface in the ground state case while the CO molecule made an angle of 134.3° to this surface at the excited state case. Based on the here used model the obtained adsorption energy was 0.36 eV which is in excellent agreement with the reported experimental value. In the present work the C-O stretch IR frequencies are calculated which are 1366.53 and 1423.16 cm⁻¹. These results are in good agreement with the earlier reported works for the surface carbonaceous compounds, and oxygenated carbon species.     

Growth of Rh nanoclusters on TiO2(1 1 0): XPS and LEIS studies

Rhodium clusters were prepared by evaporation on a nearly stoichiometric TiO₂(1 1 0) surface. The growth of metal nanoparticles, as a function of rhodium coverage, could be followed by monitoring the Rh 3d_5/2 XP peak position and by low energy ion scattering spectroscopy (LEIS). The substrate temperature in the 160-300 K regime during evaporation significantly influences the cluster size, leading to smaller crystallites at low temperature. Annealing the surface results in the agglomeration of rhodium, which commenced at lower temperature for smaller clusters. At high temperatures (∼900 K) encapsulation of rhodium also occurred.     

Comparison of O adsorption on Ni3Al (0 0 1), (0 1 1), and (1 1 1) surfaces through first-principles calculations

First-principles calculations were performed to study the properties of O adsorption on Ni₃Al (0 0 1), (0 1 1), and (1 1 1) surfaces using the Cambridge serial total package (CASTEP) code. Stable adsorption sites are identified. The atomic and electronic structures and adsorption energies are predicted. The adsorption sites for O on the Ni₃Al (0 0 1) surface are at the 2Ni–2Al fourfold hollow site, whereas O prefers to adsorb at the Ni–Al bridge site on (0 1 1) surface and 2Ni–Al threefold hollow site on (1 1 1) surface. It is found that O shows the strongest affinity for Al and the state of O is the most stabilized when O adsorbs on (0 0 1) surface, while the affinity of O for Al on (0 1 1) surface is weaker than (0 0 1) surface, and (1 1 1) surface is the weakest. The stronger O and Al affinity indicates more stable Al₂O₃ when oxidized. The experiment has shown that the oxidation resistance of single crystal superalloy in different orientations improves in the order of (1 1 1), (0 1 1), and (0 0 1) surface, suggesting that the oxidation in different crystallographic orientations may be related to the affinity of O for Al in the surface.     

Ultra-thin film growth of titanium dioxide on W(1 0 0)

We have employed low energy electron diffraction (LEED) and X-ray photoelectron spectroscopy to follow the epitaxial growth of thin films of TiO₂ on W(1 0 0). The films were grown both by metal vapour deposition of titanium onto the substrate in UHV with subsequent annealing in a low partial pressure of oxygen, and by metal vapour deposition in a low partial pressure of oxygen. LEED patterns showed the characteristic patterns of (1 1 0) oriented rutile. A systematic spot splitting was observed and attributed to a stepped surface. The calculated step height was found to be in good agreement with that expected for rutile TiO₂(1 1 0), 3.3 Å. Titanium core level shifts were used to identify oxidation states as a function of film thickness allowing the interpretation in terms of a slightly sub-stoichiometric interface layer in contact with the substrate. In combination with the LEED patterns, the film structure is therefore determined to be (1 1 0) oriented rutile with a comparable level of stoichiometry to UHV prepared bulk crystals. The ordered step structure indicates considerable structural complexity of the surface.     

Characterization of methylidyne on Pt(1 1 1) with infrared spectroscopy

Methylidyne (CH) was prepared on Pt(1 1 1) by three methods: thermal decomposition of diiodomethane (CH₂I₂), ethylene decomposition at temperatures above 450 K, and surface carbon hydrogenation. Methylidyne and its precursors are characterized by reflection absorption infrared spectroscopy (RAIRS). The C-I bond of diiodomethane breaks upon adsorption to produce methylene (CH₂), which decomposes to methylidyne at temperatures above 130 K. Above 200 K, methylidyne is the only hydrocarbon species observed with RAIRS, although reaction channels for the formation of methane (CH₄) and ethylene (C₂H₄) are indicated by temperature programmed desorption (TPD). As is well known from numerous previous studies, ethylene decomposes to ethylidyne (CCH₃) upon exposure to Pt(1 1 1) at 410 K. Upon annealing to 450 K, ethylidyne dissociates through two reaction pathways, dehydrogenation to ethynyl (CCH) and C-C bond scission to methylidyne. Ethylene dehydrogenation on the surface at 750 K and under low ethylene exposures produces surface carbon that can be hydrogenated to methylidyne with C-H and C-D stretch frequencies of 2956 and 2206 cm⁻¹, respectively. Hydrogen co-adsorption on the surface causes these frequencies to shift to higher values. Methylidyne is stable on Pt(1 1 1) to temperatures up to 500 K.     

Hydroxylated α-Al2O3 (0 0 0 1) surfaces and metal/α-Al2O3 (0 0 0 1) interfaces

X-ray photoelectron spectroscopy was applied to study the hydroxylation of α-Al₂O₃ (0 0 0 1) surfaces and the stability of surface OH groups. The evolution of interfacial chemistry of the α-Al₂O₃ (0 0 0 1) surfaces and metal/α-Al₂O₃ (0 0 0 1) interfaces are well illustrated via modifications of the surface O1s spectra. Clean hydroxylated surfaces are obtained through water- and oxygen plasma treatment at room temperature. The surface OH groups of the hydroxylated surface are very sensitive to electron beam illumination, Ar⁺ sputtering, UHV heating, and adsorption of reactive metals. The transformation of a hydroxylated surface to an Al-terminated surface occurs by high temperature annealing or Al deposition.     

SiH4 adsorption on SiGe(0 0 1)

The adsorption process of silane (SiH₄) on a SiGe(0 0 1) surface has been investigated by using infrared absorption spectroscopy in a multiple internal reflection geometry. We have observed that SiH₄ dissociatively adsorbs on a SiGe(0 0 1) surface at room temperature to generate Si and Ge hydrides. The dissociation of Si- and Ge-hydride species is found to strongly depend on the Ge concentration of the SiGe crystal. At a low Ge concentration of 9%, Si monohydride (SiH) and dihydride (SiH₂) are preferentially produced as compared to the higher Si hydride, SiH₃. At higher Ge concentrations of 19%, 36%, on the other hand, monohydrides of SiH and GeH and trihyderide SiH₃ are favorably generated at the initial stage of the adsorption. We interpret that when SiH₄ adsorbs on the SiGe surface, hydrogen atoms released from the SiH₄ molecule stick onto Ge or Si sites to produce Si or Ge monohydrides and the remaining fragments of -SiH₃ adsorb both on Si and Ge sites. The SiH₃ species is readily decomposed to lower hydrides of SiH and SiH₂ by releasing H atoms at low Ge concentrations of 0% and 9%, while the decomposition is suppressed by Ge in cases of 19% and 36%.     

A theoretical investigation on Pt3Sn(1 0 2) surface alloy and CO-Pt3Sn(1 0 2) system

The adsorption properties of CO on experimentally verified stepped Pt₃Sn(1 0 2) surface were investigated using quantum mechanical calculations. The two possible terminations of Pt₃Sn(1 0 2) were generated and on these terminations all types of possible adsorption sites were determined. The adsorption energies and geometries of the CO molecule for all those sites were calculated. The most favorable sites for adsorption were determined as the short bridge site on the terrace of pure-Pt row of the mixed-atom-ending termination, atop site at the step-edge of the pure row of pure-Pt-ending termination and atop site at the step-edge of the pure-Pt row of the mixed-atom-ending termination. The results were compared with those for similar sites on the flat Pt₃Sn(1 1 0) surface considering the fact that Pt₃Sn(1 0 2) has terraces with (1 1 0) orientation. The LDOS analysis of bare sites clearly shows that there are significant differences between the electronic properties of Pt atoms at stepped Pt₃Sn(1 0 2) surface and the electronic properties of Pt atoms at flat (1 1 0) surface, which leads to changes in the CO bonding energies of these Pt atoms. Adsorption on Pt₃Sn(1 0 2) surface is in general stronger compared to that on Pt₃Sn(1 1 0) surface. The difference in adsorption strength of similar sites on these two surface terminations is a result of stepped structure of Pt₃Sn(1 0 2). The local density of states (LDOS) of the adsorbent Pt and C of adsorbed CO was utilized. The LDOS of the surface metal atoms with CO-adsorbed atop and of their bare state were compared to see the effect of CO chemisorption on the electron density distribution of the corresponding Pt atom. The downward shift in energy peak in the LDOS curves as well as changes in the electron densities of the corresponding energy levels indicate the orbital mixing between CO molecular orbitals and metal d-states. The present study showed that the adsorption strength of the sites has a direct relation with their LDOS profiles.     

Nanostructure of photocatalytic TiO2 films sputtered at temperatures below 200 °C

The article reports on correlations between the process parameters of reactive pulsed dc magnetron sputtering, physical properties and the photocatalytic activity (PCA) of TiO₂ films sputtered at substrate surface temperature T_surf ≤ 180 °C. Films were deposited using a dual magnetron system equipped with Ti (Ø50 mm) targets in Ar + O₂ atmosphere in oxide mode of sputtering. The TiO₂ films with highly photoactive anatase phase were prepared without a post-deposition thermal annealing. The decomposition rate of the acid orange 7 (AO7) solution during the photoactivation of the TiO₂ film with UV light was used for characterization of the film PCA. It was found that (i) the partial pressure of oxygen pO₂ and the total sputtering gas pressure p_T are the key deposition parameters influencing the TiO₂ film phase composition that directly affects its PCA, (ii) the structure of sputtered TiO₂ films varies along the growth direction from the film/substrate interface to the film surface, (iii) ∼500 nm thick anatase TiO₂ films with high PCA were prepared and (iv) the structure of sputtered TiO₂ films is not affected by the substrate surface temperature T_surf when T_surf < 180 °C. The interruption of the sputtering process and deposition in long (tens of minutes) pulses alternating with cooling pauses has no effect on the structure and the PCA of TiO₂ films and results in a decrease of maximum value of T_surf necessary for the creation of nanocrystalline nc-TiO₂ film. It was demonstrated that crystalline TiO₂ films with high PCA can be sputtered at T_surf ≤ 130 °C. Based on obtained results a phase zone model of TiO₂ films was developed.     

Benzene adsorption and oxidation on Ir(1 1 1)

Adsorption, decomposition and oxidation of benzene on Ir(1 1 1) was studied by high resolution (synchrotron) XPS, temperature programmed desorption and low energy electron diffraction. Molecular adsorption of benzene on Ir(1 1 1) is observed between 170 K and 350 K. Above this temperature both desorption and decomposition of benzene take place. An ordered adsorbate structure was observed upon adsorption around 335 K. Decomposition involves C-C bond breaking as the formation of CH_ad is observed. The presence of a saturated O_ad layer (0.5 ML) weakens molecular benzene adsorption and suppresses decomposition.     

First principle study of SrTiO3 (0 0 1) surface and adsorption of NO on SrTiO3 (0 0 1)

The results of first-principles calculations about the two possible terminations of (0 0 1) surface of SrTiO₃ perovskite and adsorption of NO on SrTiO₃ (0 0 1) surface were presented. Both surface parameters (atomic structures and electronic configurations) and adsorption parameters (bond, energy and charge) of NO on SrTiO₃ (0 0 1) surface, which have never been investigated before as far as we know were investigated using density functional theory calculations with the local-density approximation (DFT-LDA). It was found that the two possible terminations of SrTiO₃ (0 0 1) surface have large surface relaxation, which leads to surface polarization and exhibits different reactivity toward the dissociative adsorption of NO. The electronic states of TiO₂-terminated surface have larger difference than that of bulk, so it is more favorable for adsorption of NO than SrO-terminated surface.     

First-principles study on the catalytic role of Ag in the oxygen adsorption of LaMnO3(0 0 1) surface

In the present paper, the catalytic role of Ag in the oxygen adsorption of LaMnO₃(0 0 1) surface has been theoretically investigated using first-principles calculations based on the density functional theory (DFT) and pseudopotential method. The O₂ adsorption energy is larger for the vertical adsorption and the covalent bond was formed between O₂ molecule and surface Mn. The calculation of electronic properties of interaction between Ag atom and LaMnO₃(0 0 1) surface demonstrates that the most stable position for Ag adsorption is hollow site. The O₂ adsorption energy dramatically increased from 0.298 eV to 1.108 eV due to Ag pre-adsorbed. It is Ag pre-adsorbed that facilitates O₂ adsorption on surface. The bond length and bond population of O₂ molecule indicate that Ag atom facilitates O₂ molecule dissociative adsorption. The Ag atom strengthens LaMnO₃(0 0 1) substrate activity and activity center was formed on surface, which enhances the electrocatalytic activity of LaMnO₃ as solid oxide fuel cells cathode material at low temperature.