弹性地基加肋功能梯度板自由振动分析的无网格法

基于一阶剪切变形理论和移动最小二乘近似研究Winkler弹性地基上加肋功能梯度板的固有频率。假设功能梯度板的材料性质沿厚度方向按幂函数连续变化,基于物理中面和移动最小二乘近似分别推导功能梯度板和肋条的动能和势能,再通过引入位移协调条件,建立板和肋条节点参数转换关系,叠加两者的总能量,然后利用Hamilton原理推导加肋功能梯度板自由振动控制方程。采用完全转换法施加边界条件。通过将本文的计算结果与有限元以及文献的结果对比,验证方法的收敛性以及准确性。     

Closed form solutions for free vibrations of rectangular Mindlin plates

A new two-eigenfunctions theory, using the amplitude deflection and the generalized curvature as two fundamental eigenfunctions, is proposed for the free vibration solutions of a rectangular Mindlin plate. The three classical eigenvalue differential equations of a Mindlin plate are reformulated to arrive at two new eigenvalue differential equations for the proposed theory. The closed form eigensolutions, which are solved from the two differential equations by means of the method of separation of variables are identical with those via Kirchhoff plate theory for thin plate, and can be employed to predict frequencies for any combinations of simply supported and clamped edge conditions. The free edges can also be dealt with if the other pair of opposite edges are simply supported. Some of the solutions were not available before. The frequency parameters agree closely with the available ones through pb-2 Rayleigh-Ritz method for different aspect ratios and relative thickness of plate.     

Free axisymmetric vibration of FGM circular plates

Based on the three-dimensional theory, this work presents a direct displacement method to investigate the free axisymmetric vibration of transversely isotropic circular plates, whose material is functionally graded and properties obey the exponential law along the thickness direction of the plate. Under two boundary conditions, the solution satisfies all basic equations and the Corresponding boundary condition at every point. Thus, it is three-dimensional exact. Numerical examples are presented and compared with previous works. The present method can also be extended to the case of arbitrary distribution of the material properties along the thickness direction of the plate.     

Analytical solutions of steady vibration of free rectangular plate on semi-infinite elastic foundation

The method of double Fourier transform was employed in the analysis of the semi-infinite elastic foundation with vertical load.And an integral representations for the displacements of the semi-infinite elastic foundation was presented.The analytical solution of steady vibration of an elastic rectangle plate with four free edges on the semi-infinite elastic foundation was also given by combining the analytical solution of the elastic rectangle plate with the integral representation for displacements of the semi- infinite elastic foundation.Some computational results and the analysis on the influence of parameters were presented.     

Elastic stability of inhomogeneous thin plates on an elastic foundation

We study the elastic stability of infinite inhomogeneous thin plates on an elastic foundation under in-plane compression. The elastic stiffness constants depend on the coordinate variable in the thickness direction of the plate. The elastic foundation is represented as a Winkler-type model characterized by linear and nonlinear spring constants. First we derive the Föppl–von Kármán equations by taking variations of the elastic strain energy. Next we develop the linear stability analysis of the plate under uniform in-plane compression and explicitly derive the critical loads and wave numbers for particular three cases. The effects of the material inhomogeneity, material orthotropy and loading orthotropy on the critical states are examined independently. Finally, we perform a weakly nonlinear analysis of the plate at the onset of the buckling instability. With the multiple scales method, the amplitude equations for the unstable modes that provide insight into the mode type and its amplitude are derived and then the effect of the material inhomogeneity on buckling modes are evaluated qualitatively.     

NONLINEAR VIBRATION FOR MODERATE THICKNESS RECTANGULAR CRACKED PLATES INCLUDING COUPLED EFFECT OF ELASTIC FOUNDATION

IntroductionThe moderate thickness plates on elastic foundation are a kind of important structure instructural engineering. The mechanic characters of the plates on elastic foundation withdifferent boundary conditions have been received considerable atten…     

Free vibration analysis of general stepped circular plates with internal elastic ring support resting on Winkler foundation by green function method

Natural frequencies are important dynamic characteristics of a structure. Therefore, the exact solution pertaining to free vibration of stepped circular plate elastically restrained against rotation, translation, and internal elastic ring support resting on an arbitrary variable elastic foundation using Green Function is presented in this paper. Thus, an accurate and direct modeling technique is introduced for modeling stepped circular plate on an arbitrary variable elastic foundation with arbitrary boundary conditions and internal elastic ring support. The effect of the translational along with rotational support flexibilities, as well as, the elastic coefficient of Winkler foundation and other parameters are assessed. Finally, some numerical examples are shown in order to present the efficiency and simplicity of the Green Function in the new formulation.     

Large amplitude free vibration of symmetrically laminated magneto-electro-elastic rectangular plates on Pasternak type foundation

Nonlinear free vibration of symmetrically laminated magneto-electro-elastic rectangular plate resting on an elastic foundation is studied analytically. The plate is considered to be simply supported on all edges. It is also assumed that the magneto-electro-elastic body is poled along the z direction and subjected to electric and magnetic potentials between the upper and lower surfaces. To model the motion of the plate, the first order shear deformation theory along with the Gauss's equations for electrostatics and magnetostatics are used. Then equations of motion are reduced to a single nonlinear ordinary differential equation which is solved analytically by multiple scales method. The results are compared with the published results and good agreement is found. Some numerical examples are presented to investigate the effects of several parameters on the linear and nonlinear behavior of these plates.     

多层正交异性矩形薄板弯曲振动稳定解析解

构造了带有补充项的双重正弦傅里叶级数通解来求解各种边界条件的多层正交各向异性矩形薄板的弯曲、振动和稳定问题.将坐标轴取在中性面上,求出用挠度表示的应力表达式,然后由横截面上每单位宽度的应力合成板的内力;再将层合板的内力代入板的平衡方程中得到板的控制方程,将多层板的物理参数折算为等价的单层板物理参数;最后联立控制方程与边界条件,求得未知量的系数并代入本文的通解中.本文的通解不需要叠加即可求解各种边界条件的板的弯曲、振动和稳定问题;现有的对于单层板的研究都可以用本文的方法拓展到多层板领域;对于复杂边界条件的板,也可以使用该通解分析.     

VIBRATIONS OF STEPPED RECTANGULAR THIN PLATES ON WINKLER’S FOUNDATION

ＩｎｔｒｏｄｕｃｔｉｏｎＭｕｃｈｆａｍｉｌｉａｒｉｎｅｎｇｉｎｅｅｒｉｎｇａｒｅｅｌａｓｔｉｃｆｏｕｎｄａｔｉｏｎｐｌａｔｅｓ,ｓｕｃｈａｓｆｏｕｎｄａｔｉｏｎｂａｓｅｐｌａｔｅｓｉｎｃｉｖｉｌｅｎｇｉｎｅｅｒｉｎｇ,ｈｉｇｈｗａｙｓｕｒｆａｃｅ,ｒ...     

New exact solutions for free vibrations of rectangular thin plates by symplectic dual method

The separation of variables is employed to solve Hamiltonian dual form of eigenvalue problem for transverse free vibrations of thin plates, and formulation of the natural mode in closed form is performed. The closed-form natural mode satisfies the governing equation of the eigenvalue problem of thin plate exactly and is applicable for any types of boundary conditions. With all combinations of simplysupported （S） and clamped （C） boundary conditions applied to the natural mode, the mode shapes are obtained uniquely and two eigenvalue equations are derived with respect to two spatial coordinates, with the aid of which the normal modes and frequencies are solved exactly. It was believed that the exact eigensolutions for cases SSCC, SCCC and CCCC were unable to be obtained, however, they are successfully found in this paper. Comparisons between the present results and the FEM results validate the present exact solutions, which can thus be taken as the benchmark for verifying different approximate approaches.     

基于一种广义梁理论的弹性地基FGM简支梁自由振动解析解

基于一种扩展的n阶广义剪切变形梁理论(n-GBT),应用Hamilton原理,建立了以轴向位移、横向位移及转角为未知函数的Winkler-Pasternak弹性地基功能梯度材料(FGM)梁的自由振动方程,采用Navier法获得了弹性地基FGM简支梁自由振动的精确解。与多种梁理论预测结果进行比较,讨论并给出了GBT阶次n的理想取值;分析了梯度指标、跨厚比及地基刚度对FGM梁频率的影响。结果表明:本文方法有效且适用范围广,若采用高阶剪切梁理论模型,宜取n≥3的奇数;FGM梁的自振频率随材料梯度指标的增大而减小;随跨厚比的增加而增大,但当跨厚比大于20,跨厚比增加对频率的影响很小;随地基刚度的增加而增大,地基刚度足够大时,频率趋于收敛。     

非均匀Winkler弹性地基上变厚度矩形板自由振动的DTM求解

针对非均匀Winkler弹性地基上变厚度矩形板的自由振动问题,通过一种有效的数值求解方法——微分变换法（DTM）,研究其无量纲固有频率特性。已知变厚度矩形板对边为简支边界条件,其他两边的边界条件为简支、固定或自由任意组合。采用DTM将非均匀Winkler弹性地基上变厚度矩形板无量纲化的自由振动控制微分方程及其边界条件变换为等价的代数方程,得到含有无量纲固有频率的特征方程。数值结果退化为均匀Winker弹性地基上矩形板以及变厚度矩形板的情形,并与已有文献采用的不同求解方法进行比较,结果表明,DTM具有非常高的精度和很强的适用性。最后,在不同边界条件下分析地基变化参数、厚度变化参数和长宽比对矩形板无量纲固有频率的影响,并给出了非均匀Winkler弹性地基上对边简支对边固定变厚度矩形板的前六阶振型。     

弹性地基上含孔隙功能梯度材料板的自由振动和动力响应

为研究弹性地基上含孔隙的材料特性沿厚度呈Sigmoid函数变化的功能梯度材料(S-FGM)板的振动特性,本文基于改进的Voigt模型,分别建立了孔隙为均匀分布和非均匀分布两种类型的功能梯度材料的物性参数模型.根据复合材料薄板理论导出了弹性地基上含孔隙的功能梯度材料板的运动方程,用伽辽金法寻求四边简支边界条件下板自由振动...     

VIBRATIONS OF ONE-WAY RECTANGULAR STEPPEDTHIN PLATES ON WINKLER'S FOUNDATION

I.IntroductionUsedextensivelyillengineeringareone-wayrectallgularsteppedthinplates.suchaslongandnarrow"platesofl'Oundationbaseincivilengineering,high-c"a}'surface.retainingwall,undergroundstructurefi-ame,baseplatesofsluice.shipyardando\-ertlowdam.Theyshouldnotonlymeetrequirementsofstrength,stiffnessalldsteadinessofstructuresbutalsosavematerialstotileftlll.Thus,steppedstructuresarecolnmonl}'adoptedinengineerings.Sofar.vibratio,nsofsuChplateshavenotbeendiscussedinanyliterature.Inthispaper.disc…     

Exact solutions for radial deformations of a functionally graded isotropic and incompressible second-order elastic cylinder

We find closed-form solutions for axisymmetric plane strain deformations of a functionally graded circular cylinder comprised of an isotropic and incompressible second-order elastic material with moduli varying only in the radial direction. Cylinder's inner and outer surfaces are loaded by hydrostatic pressures. These solutions are specialized to cases where only one of the two surfaces is loaded. It is found that for a linear through-the-thickness variation of the elastic moduli, the hoop stress for the first-order solution (or in a cylinder comprised of a linear elastic material) is a constant but that for the second-order solution varies through the thickness. The radial displacement, the radial stress and the hoop stress do not depend upon the second-order elastic constant but the hydrostatic pressure and hence the axial stress depends upon it. When the two elastic moduli vary as the radius raised to the power two or four, the radial and the hoop stresses in an infinite space with a pressurized cylindrical cavity equal the pressure in the cavity. For an affine variation of the elastic moduli, the hoop stress in an internally loaded cylinder made of a linear elastic isotropic and incompressible material at the point is the same as that in a homogeneous cylinder. Here R_in and R_ou equal, respectively, the inner and the outer radius of the undeformed cylinder and R the radial coordinate of a point in the unstressed reference configuration.     

Reciprocal theorem method for the forced vibration of elastic thick rectangular plates

I.IntroductionTheproblelllsofthefol.cedvibrationofelasticthickrectallgularplatestobesolvedareofgreattheoreticalsignificanceandpractical\7altle.Asthevibratinggoverningequationofthethickplateismorecomplicatedthallthatofthinplate.itisdil'ficulttoso]\'einmathematics.Manyscholarshat,eresearchedintotheseproblemsalldadvancedvariousspecialapproximations.Suchassuperpositionmethod.initialfLinctiollnletllod.thecombinedseriesot'theeigenftlnctionsofdeepbeamabouttilecorrespondillgboulldarycollditions.eller…     

THE METHOD OF THE RECIPROCAL THEOREM OF FORCED VIBRATION FOR THE ELASTIC THIN RECTANGULAR PLATES (III)—CANTILEVER RECTANGULAR PLATES

In this paper, applying the method of the reciprocal theorem, we give the stationary solutions of the forced vibration of cantilever rectangular plates under uniformly distributed harmonic load and concentrated harmonic load acting at any point of the plates, the figures and tables of number value of bending moment and the deflection amplitudes as well.     

On new symplectic superposition method for exact bending solutions of rectangular cantilever thin plates

A novel superposition method based on the symplectic geometry approach is presented for exact bending analysis of rectangular cantilever thin plates. The basic equations for rectangular thin plate are first transferred into Hamilton canonical equations. By the symplectic geometry method, the analytic solutions to some problems for plates with slidingly supported edges are derived. Then the exact bending solutions of rectangular cantilever thin plates are obtained using the method of superposition. The symplectic superposition method developed in this paper is completely rational compared with the conventional analytical ones because the predetermination of deflection functions, which is indispensable in existing methods, is dispelled.     

Exact solutions for free vibration of transversely isotropic piezoelectric circular plates

By employing the general solution for coupled three-dimensional equations of a transversely isotropic piezoelectric body, this paper investigates the free vibration of a circular plate made of piezoelectric material. Three-dimensional exact solutions are then obtained under two specified boundary conditions, which can be used for both axisymmetric and non-axisymmetric cases. Numerical results are finally presented. The project supported by the National Natural Science Foundation of China (No. 19872060)