On the Justification of Viscoelastic Elliptic Membrane Shell Equations

We consider a family of linearly viscoelastic shells with thickness \(2\varepsilon\), clamped along their entire lateral face, all having the same middle surface \(S=\boldsymbol{\theta}(\bar{\omega})\subset \mathbb{R}^{3}\), where \(\omega\subset\mathbb{R}^{2}\) is a bounded and connected open set with a Lipschitz-continuous boundary \(\gamma\). We make an essential geometrical assumption on the middle surface \(S\), which is satisfied if \(\gamma\) and \(\boldsymbol{\theta}\) are smooth enough and \(S\) is uniformly elliptic. We show that, if the applied body force density is \(O(1)\) with respect to \(\varepsilon\) and surface tractions density is \(O(\varepsilon)\), the solution of the scaled variational problem in curvilinear coordinates, \(\boldsymbol{u}( \varepsilon)\), defined over the fixed domain \(\varOmega=\omega\times (-1,1)\) for each \(t\in[0,T]\), converges to a limit \(\boldsymbol{u}\) with \(u_{\alpha}(\varepsilon)\rightarrow u_{\alpha}\) in \(W^{1,2}(0,T,H ^{1}(\varOmega))\) and \(u_{3}(\varepsilon)\rightarrow u_{3}\) in \(W^{1,2}(0,T,L^{2}(\varOmega))\) as \(\varepsilon\to0\). Moreover, we prove that this limit is independent of the transverse variable. Furthermore, the average \(\bar{\boldsymbol{u}}= \frac{1}{2}\int_{-1}^{1} \boldsymbol{u}dx_{3}\), which belongs to the space \(W^{1,2}(0,T, V_{M}( \omega))\), where

$$V_{M}(\omega)=H^{1}_{0}(\omega)\times H^{1}_{0}(\omega)\times L ^{2}(\omega), $$

satisfies what we have identified as (scaled) two-dimensional equations of a viscoelastic membrane elliptic shell, which includes a long-term memory that takes into account previous deformations. We finally provide convergence results which justify those equations.

     

Uniaxial experimental study of the acoustic emission and deformation behavior of composite rock based on 3D digital image correlation (DIC)

In this paper, uniaxial compression tests were carried out on a series of composite rock specimens with different dip angles, which were made from two types of rock-like material with different strength. The acoustic emission technique was used to monitor the acoustic signal characteristics of composite rock specimens during the entire loading process. At the same time, an optical non-contact 3 D digital image correlation technique was used to study the evolution of axial strain field and the maximal strain field before and after the peak strength at different stress levels during the loading process. The effect of bedding plane inclination on the deformation and strength during uniaxial loading was analyzed. The methods of solving the elastic constants of hard and weak rock were described. The damage evolution process, deformation and failure mechanism, and failure mode during uniaxial loading were fully determined. The experimental results show that the θ = 0?–45?specimens had obvious plastic deformation during loading, and the brittleness of the θ = 60?–90?specimens gradually increased during the loading process. When the anisotropic angle θincreased from 0?to 90?, the peak strength, peak strain,and apparent elastic modulus all decreased initially and then increased. The failure mode of the composite rock specimen during uniaxial loading can be divided into three categories:tensile fracture across the discontinuities(θ = 0?–30?), slid-ing failure along the discontinuities(θ = 45?–75?), and tensile-split along the discontinuities(θ = 90?). The axial strain of the weak and hard rock layers in the composite rock specimen during the loading process was significantly different from that of the θ = 0?–45?specimens and was almost the same as that of the θ = 60?–90?specimens. As for the strain localization highlighted in the maximum principal strain field, the θ = 0?–30?specimens appeared in the rock matrix approximately parallel to the loading direction,while in the θ = 45?–90?specimens it appeared at the hard and weak rock layer interface.     

Long-time Dynamics of Resonant Weakly Nonlinear CGL Equations

Consider a weakly nonlinear CGL equation on the torus \(\mathbb {T}^d\):

$$\begin{aligned} u_t+i\Delta u=\epsilon [\mu (-1)^{m-1}\Delta ^{m} u+b|u|^{2p}u+ ic|u|^{2q}u]. \end{aligned}$$

(*)

Here \(u=u(t,x)\), \(x\in \mathbb {T}^d\), \(0<\epsilon <<1\), \(\mu \geqslant 0\), \(b,c\in \mathbb {R}\) and \(m,p,q\in \mathbb {N}\). Define \(I(u)=(I_{\mathbf {k}},\mathbf {k}\in \mathbb {Z}^d)\), where \(I_{\mathbf {k}}=v_{\mathbf {k}}\bar{v}_{\mathbf {k}}/2\) and \(v_{\mathbf {k}}\), \(\mathbf {k}\in \mathbb {Z}^d\), are the Fourier coefficients of the function \(u\) we give. Assume that the equation \((*)\) is well posed on time intervals of order \(\epsilon ^{-1}\) and its solutions have there a-priori bounds, independent of the small parameter. Let \(u(t,x)\) solve the equation \((*)\). If \(\epsilon \) is small enough, then for \(t\lesssim {\epsilon ^{-1}}\), the quantity \(I(u(t,x))\) can be well described by solutions of an effective equation:

$$\begin{aligned} u_t=\epsilon [\mu (-1)^{m-1}\Delta ^m u+ F(u)], \end{aligned}$$

where the term \(F(u)\) can be constructed through a kind of resonant averaging of the nonlinearity \(b|u|^{2p}+ ic|u|^{2q}u\).

     

Characterization for elastic constants of fused deposition modelling-fabricated materials based on the virtual fields method and digital image correlation

Fused deposition modelling (FDM), a widely used rapid prototyping process, is a promising technique in manufacturing engineering. In this work, a method for characterizing elastic constants of FDM-fabricated materials is proposed. First of all, according to the manufacturing process of FDM, orthotropic constitutive model is used to describe the mechanical behavior. Then the virtual fields method (VFM) is applied to characterize all the mechanical parameters \((Q_{11}\), \(Q_{22}\), \(Q_{12}\), \(Q_{66})\) using the full-field strain, which is measured by digital image correlation (DIC). Since the principal axis of the FDM-fabricated structure is sometimes unknown due to the complexity of the manufacturing process, a disk in diametrical compression is used as the load configuration so that the loading angle can be changed conveniently. To verify the feasibility of the proposed method, finite element method (FEM) simulation is conducted to obtain the strain field of the disk. The simulation results show that higher accuracy can be achieved when the loading angle is close to \(30^{\circ }\). Finally, a disk fabricated by FDM was used for the experiment. By rotating the disk, several tests with different loading angles were conducted. To determine the position of the principal axis in each test, two groups of parameters \((Q_{11}\), \(Q_{22}\), \(Q_{12}\), \(Q_{66})\) are calculated by two different groups of virtual fields. Then the corresponding loading angle can be determined by minimizing the deviation between two groups of the parameters. After that, the four constants \((Q_{11}\), \(Q_{22}\), \(Q_{12}\), \(Q_{66})\) were determined from the test with an angle of \(27^{\circ }\).     

Insight into Heterogeneity Effects in Methane Hydrate Dissociation via Pore-Scale Modeling

A large number (1253) of high-quality streaming potential coefficient (\(C_\mathrm{sp})\) measurements have been carried out on Berea, Boise, Fontainebleau, and Lochaline sandstones (the latter two including both detrital and authigenic overgrowth forms), as a function of pore fluid salinity (\(C_\mathrm{f})\) and rock microstructure. All samples were saturated with fully equilibrated aqueous solutions of NaCl (10\(^{-5}\) and 4.5 mol/dm\(^{3})\) upon which accurate measurements of their electrical conductivity and pH were taken. These \(C_\mathrm{sp}\) measurements represent about a fivefold increase in streaming potential data available in the literature, are consistent with the pre-existing 266 measurements, and have lower experimental uncertainties. The \(C_\mathrm{sp}\) measurements follow a pH-sensitive power law behaviour with respect to \(C_\mathrm{f}\) at medium salinities (\(C_\mathrm{sp} =-\,1.44\times 10^{-9} C_\mathrm{f}^{-\,1.127} \), units: V/Pa and mol/dm\(^{3})\) and show the effect of rock microstructure on the low salinity \(C_\mathrm{sp}\) clearly, producing a smaller decrease in \(C_\mathrm{sp}\) per decade reduction in \(C_\mathrm{f}\) for samples with (i) lower porosity, (ii) larger cementation exponents, (iii) smaller grain sizes (and hence pore and pore throat sizes), and (iv) larger surface conduction. The \(C_\mathrm{sp}\) measurements include 313 made at \(C_\mathrm{f} > 1\) mol/dm\(^{3}\), which confirm the limiting high salinity \(C_\mathrm{sp}\) behaviour noted by Vinogradov et al., which has been ascribed to the attainment of maximum charge density in the electrical double layer occurring when the Debye length approximates to the size of the hydrated metal ion. The zeta potential (\(\zeta \)) was calculated from each \(C_\mathrm{sp}\) measurement. It was found that \(\zeta \) is highly sensitive to pH but not sensitive to rock microstructure. It exhibits a pH-dependent logarithmic behaviour with respect to \(C_\mathrm{f}\) at low to medium salinities (\(\zeta =0.01133 \log _{10} \left( {C_\mathrm{f} } \right) +0.003505\), units: V and mol/dm\(^{3})\) and a limiting zeta potential (zeta potential offset) at high salinities of \({\zeta }_\mathrm{o} = -\,17.36\pm 5.11\) mV in the pH range 6–8, which is also pH dependent. The sensitivity of both \(C_\mathrm{sp}\) and \(\zeta \) to pH and of \(C_\mathrm{sp}\) to rock microstructure indicates that \(C_\mathrm{sp}\) and \(\zeta \) measurements can only be interpreted together with accurate and equilibrated measurements of pore fluid conductivity and pH and supporting microstructural and surface conduction measurements for each sample.     

Bifurcations of a creeping air–water flow in a conical container

This numerical study describes the eddy emergence and transformations in a slow steady axisymmetric air–water flow, driven by a rotating top disk in a vertical conical container. As water height \(H_{\mathrm{w}}\) and cone half-angle \(\beta \) vary, numerous flow metamorphoses occur. They are investigated for \(\beta =30^{\circ }, 45^{\circ }\), and \(60^{\circ }\). For small \(H_{\mathrm{w}}\), the air flow is multi-cellular with clockwise meridional circulation near the disk. The air flow becomes one cellular as \(H_{\mathrm{w}}\) exceeds a threshold depending on \(\beta \). For all \(\beta \), the water flow has an unbounded number of eddies whose size and strength diminish as the cone apex is approached. As the water level becomes close to the disk, the outmost water eddy with clockwise meridional circulation expands, reaches the interface, and induces a thin layer with anticlockwise circulation in the air. Then this layer expands and occupies the entire air domain. The physical reasons for the flow transformations are provided. The results are of fundamental interest and can be relevant for aerial bioreactors.     

Influence of hydrodynamic slip on convective transport in flow past a circular cylinder

The presence of a finite tangential velocity on a hydrodynamically slipping surface is known to reduce vorticity production in bluff body flows substantially while at the same time enhancing its convection downstream and into the wake. Here, we investigate the effect of hydrodynamic slippage on the convective heat transfer (scalar transport) from a heated isothermal circular cylinder placed in a uniform cross-flow of an incompressible fluid through analytical and simulation techniques. At low Reynolds (\({\textit{Re}}\ll 1\)) and high Péclet (\({\textit{Pe}}\gg 1\)) numbers, our theoretical analysis based on Oseen and thermal boundary layer equations allows for an explicit determination of the dependence of the thermal transport on the non-dimensional slip length \(l_s\). In this case, the surface-averaged Nusselt number, Nu transitions gradually between the asymptotic limits of \(Nu \sim {\textit{Pe}}^{1/3}\) and \(Nu \sim {\textit{Pe}}^{1/2}\) for no-slip (\(l_s \rightarrow 0\)) and shear-free (\(l_s \rightarrow \infty \)) boundaries, respectively. Boundary layer analysis also shows that the scaling \(Nu \sim {\textit{Pe}}^{1/2}\) holds for a shear-free cylinder surface in the asymptotic limit of \({\textit{Re}}\gg 1\) so that the corresponding heat transfer rate becomes independent of the fluid viscosity. At finite \({\textit{Re}}\), results from our two-dimensional simulations confirm the scaling \(Nu \sim {\textit{Pe}}^{1/2}\) for a shear-free boundary over the range \(0.1 \le {\textit{Re}}\le 10^3\) and \(0.1\le {\textit{Pr}}\le 10\). A gradual transition from the lower asymptotic limit corresponding to a no-slip surface, to the upper limit for a shear-free boundary, with \(l_s\), is observed in both the maximum slip velocity and the Nu. The local time-averaged Nusselt number \(Nu_{\theta }\) for a shear-free surface exceeds the one for a no-slip surface all along the cylinder boundary except over the downstream portion where unsteady separation and flow reversal lead to an appreciable rise in the local heat transfer rates, especially at high \({\textit{Re}}\) and Pr. At a Reynolds number of \(10^3\), the formation of secondary recirculating eddy pairs results in appearance of additional local maxima in \(Nu_{\theta }\) at locations that are in close proximity to the mean secondary stagnation points. As a consequence, Nu exhibits a non-monotonic variation with \(l_s\) increasing initially from its lowermost value for a no-slip surface and then decreasing before rising gradually toward the upper asymptotic limit for a shear-free cylinder. A non-monotonic dependence of the spanwise-averaged Nu on \(l_s\) is observed in three dimensions as well with the three-dimensional wake instabilities that appear at sufficiently low \(l_s\), strongly influencing the convective thermal transport from the cylinder. The analogy between heat transfer and single-component mass transfer implies that our results can directly be applied to determine the dependency of convective mass transfer of a single solute on hydrodynamic slip length in similar configurations through straightforward replacement of Nu and \({\textit{Pr}}\) with Sherwood and Schmidt numbers, respectively.     

Approximation of Flat <Emphasis Type="Italic">W</Emphasis><Superscript>2,2</Superscript> Isometric Immersions by Smooth Ones

Let \({S\subset\mathbb{R}^2}\) be a bounded Lipschitz domain and denote by \({W^{2,2}_{\text{iso}}(S; \mathbb{R}^3)}\) the set of mappings \({u\in W^{2,2}(S;\mathbb{R}^3)}\) which satisfy \({(\nabla u)^T(\nabla u) = Id}\) almost everywhere. Under an additional regularity condition on the boundary \({\partial S}\) (which is satisfied if \({\partial S}\) is piecewise continuously differentiable), we prove that the strong W ^2,2 closure of \({W^{2,2}_{\text{iso}}(S; \mathbb{R}^3)\cap C^{\infty}(\overline{S};\mathbb{R}^3)}\) agrees with \({W^{2,2}_{\text{iso}}(S; \mathbb{R}^3)}\).     

Further Dense Properties of the Space of Circle Diffeomorphisms with a Liouville Rotation Number

In continuation of Matsumoto’s paper (Nonlinearity 25:1495–1511, 2012) we show that various subspaces are \(C^{\infty }\)-dense in the space of orientation-preserving \(C^{\infty }\)-diffeomorphisms of the circle with rotation number \(\alpha \), where \(\alpha \in {\mathbb {S}}^1\) is any prescribed Liouville number. In particular, for every odometer \({\mathcal {O}}\) of product type we prove the denseness of the subspace of diffeomorphisms which are orbit-equivalent to \({\mathcal {O}}\).     

The role of angular momentum in the laminar motion of viscous fluids

In laminar flow, viscous fluids must exert appropriate elastic shear stresses normal to the flow direction. This is a direct consequence of the balance of angular momentum. There is a limit, however, to the maximum elastic shear stress that a fluid can exert. This is the ultimate shear stress, \(\tau _\mathrm{y}\), of the fluid. If this limit is exceeded, laminar flow becomes dynamically incompatible. The ultimate shear stress of a fluid can be determined from experiments on plane Couette flow. For water at \(20\,^{\circ }\hbox {C}\), the data available in the literature indicate a value of \(\tau _\mathrm{y}\) of about \(14.4\times 10^{-3}\, \hbox {Pa}\). This study applies this value to determine the Reynolds numbers at which flowing water reaches its ultimate shear stress in the case of Taylor–Couette flow and circular pipe flow. The Reynolds numbers thus obtained turn out to be reasonably close to those corresponding to the onset of turbulence in the considered flows. This suggests a connection between the limit to laminar flow, on the one hand, and the occurrence of turbulence, on the other.     

Displacement and Dissolution Characteristics of CO$$_{}$$/Brine System in Unconsolidated Porous Media

This study investigated the dynamic displacement and dissolution of \(\hbox {CO}_{2}\) in porous media at 313 K and 6/8 MPa. Gaseous (\(\hbox {gCO}_{2}\)) at 6 MPa and supercritical \(\hbox {CO}_{2 }(\hbox {scCO}_{2}) \) at 8 MPa were injected downward into a glass bead pack at different flow rates, following upwards brine injection. The processes occurring during \(\hbox {CO}_{2}\) drainage and brine imbibition were visualized using magnetic resonance imaging. The drainage flow fronts were strongly influenced by the flow rates, resulting in different gas distributions. However, brine imbibition proceeded as a vertical compacted front due to the strong effect of gravity. Additionally, the effects of flow rate on distribution and saturation were analyzed. Then, the front movement of \(\hbox {CO}_{2}\) dissolution was visualized along different paths after imbibition. The determined \(\hbox {CO}_{2}\) concentrations implied that little \(\hbox {scCO}_{2}\) dissolved in brine after imbibition. The dissolution rate was from \(10^{-8}\) to \(10^{-9}\, \hbox {kg}\, \hbox {m}^{-3} \, \hbox {s}^{-1}\) and from \(10^{-6}\) to \(10^{-8}\, \hbox {kg}\, \hbox {m}^{-3} \, \hbox {s}^{-1}\) for \(\hbox {gCO}_{2}\) at 6 MPa and \(\hbox {scCO}_{2 }\) at 8 MPa, respectively. The total time for the \(\hbox {scCO}_{2}\) dissolution was short, indicating fast mass transfer between the \(\hbox {CO}_{2}\) and brine. Injection of \(\hbox {CO}_{2}\) under supercritical conditions resulted in a quick establishment of a steady state with high storage safety.     

On the Fiber Stretch in Shearing Deformations of Fibrous Soft Materials

The behavior of the fiber stretch in simple shear of soft materials fiber-reinforced with a single family of oriented parallel fibers is examined. The analysis is purely kinematical and the results are valid for both compressible and incompressible materials. It is shown that for a given amount of shear, for all fiber orientation angles in the range \(0 < \theta < \pi /4\), the fiber stretch increases with increasing \(\theta\) whereas in the range \(\pi /4 < \theta < \pi /2\), this is no longer the case and there is a particular fiber orientation for which the fiber stretch is a maximum. For a particular amount of shear corresponding to a special angle of shear (a “magic” angle of \(35.26^{\circ}\)), the fiber-orientation angle at which the fiber stretch is a maximum is its geometric complement namely a magic angle of \(54.74^{\circ}\). The results are also valid for torsion of a circular cylinder reinforced with a single family of helically wound fibers.     

The Unstable Set of a Periodic Orbit for Delayed Positive Feedback

In the paper [Large-amplitude periodic solutions for differential equations with delayed monotone positive feedback, JDDE 23 (2011), no. 4, 727–790], we have constructed large-amplitude periodic orbits for an equation with delayed monotone positive feedback. We have shown that the unstable sets of the large-amplitude periodic orbits constitute the global attractor besides spindle-like structures. In this paper we focus on a large-amplitude periodic orbit \({\mathcal {O}}_{p}\) with two Floquet multipliers outside the unit circle, and we intend to characterize the geometric structure of its unstable set \({\mathcal {W}}^{u}\left( {\mathcal {O}}_{p}\right) \). We prove that \({\mathcal {W}}^{u}\left( {\mathcal {O}}_{p}\right) \) is a three-dimensional \(C^{1}\)-submanifold of the phase space and admits a smooth global graph representation. Within \({\mathcal {W}}^{u}\left( {\mathcal {O}}_{p}\right) \), there exist heteroclinic connections from \({\mathcal {O}}_{p}\) to three different periodic orbits. These connecting sets are two-dimensional \(C^{1}\)-submanifolds of \({\mathcal {W}}^{u}\left( {\mathcal {O}}_{p}\right) \) and homeomorphic to the two-dimensional open annulus. They form \(C^{1}\)-smooth separatrices in the sense that they divide the points of \({\mathcal {W}}^{u}\left( {\mathcal {O}}_{p}\right) \) into three subsets according to their \(\omega \)-limit sets.     

A Simple Method for the Determination of Adsorption Kinetic Parameters Using Recycle Fixed-Bed Adsorber

This study focuses on the development of a novel analysis technique for determining the intraparticle diffusivity \((D_{\mathrm{S}})\) and fluid film mass transfer coefficient \((k_\mathrm{F})\) from a concentration history curve of a recycle fixed-bed reactor without using the linear driving force approximation and empirical equations for the estimation of \(k_\mathrm{F}\). The recycle fixed-bed method requires lesser amounts of working fluid for experiment purposes, which is an advantage over the usual fixed-bed method. Based on the characterization results of the concentration history curves, simulated by rigorous numerical calculations, a novel analysis technique was established. The \(D_{\mathrm{S}}\) value can be determined from the experimentally obtained time at which the concentration of the curve is minimal \((t_{C\mathrm{min}})\). The \(k_\mathrm{F}\) value can be determined from the \(D_{\mathrm{S}}\) value and Biot number (Bi), which can be estimated from the experimental ratio of the maximum concentration to the minimum concentration \((c_{\max }/c_{\min })\). The \(D_{\mathrm{S}}\) and \(k_\mathrm{F}\) values of phenol adsorption on an activated carbon material were determined experimentally using the proposed analysis method. This method enables the determination of reliable adsorption kinetic parameters through a simple and economical experiment. However, appropriate experimental data must be acquired under regulated experimental conditions, especially in the case of fluctuation of the concentration history curve.     

Uniqueness of Positive Ground State Solutions of the Logarithmic Schrödinger Equation

We prove the uniqueness of positive ground state solutions of the problem \({ {\frac {d^{2}u}{dr^{2}}} + {\frac {n-1}{r}}{\frac {du}{dr}} + u \ln(|u|) = 0}\), \({u(r) > 0~\forall r \ge 0}\), and \({(u(r),u'(r)) \to (0, 0)}\) as \({r \to \infty}\). This equation is derived from the logarithmic Schrödinger equation \({{\rm i}\psi_{t} = {\Delta} \psi + u \ln \left(|u|^{2}\right)}\), and also from the classical equation \({{\frac {\partial u}{\partial t}} = {\Delta} u +u \left(|u|^{p-1}\right) -u}\). For each \({n \ge 1}\), a positive ground state solution is \({ u_{0}(r) = \exp \left(-{\frac{r^2}{4}} + {\frac{n}{2}}\right),~0 \le r < \infty}\). We combine \({u_{0}(r)}\) with energy estimates and associated Ricatti equation estimates to prove that, for each \({n \in \left[1, 9 \right]}\), \({u_{0}(r)}\) is the only positive ground state. We also investigate the stability of \({u_{0}(r)}\). Several open problems are stated.     

In Situ Chemically-Selective Monitoring of Multiphase Displacement Processes in a Carbonate Rock Using 3D Magnetic Resonance Imaging

Accurate monitoring of multiphase displacement processes is essential for the development, validation and benchmarking of numerical models used for reservoir simulation and for asset characterization. Here we demonstrate the first application of a chemically-selective 3D magnetic resonance imaging (MRI) technique which provides high-temporal resolution, quantitative, spatially resolved information of oil and water saturations during a dynamic imbibition core flood experiment in an Estaillades carbonate rock. Firstly, the relative saturations of dodecane (\(S_{\mathrm{o}})\) and water (\(S_{\mathrm{w}})\), as determined from the MRI measurements, have been benchmarked against those obtained from nuclear magnetic resonance (NMR) spectroscopy and volumetric analysis of the core flood effluent. Excellent agreement between both the NMR and MRI determinations of \(S_{\mathrm{o}}\) and \(S_{\mathrm{w}}\) was obtained. These values were in agreement to 4 and 9% of the values determined by volumetric analysis, with absolute errors in the measurement of saturation determined by NMR and MRI being 0.04 or less over the range of relative saturations investigated. The chemically-selective 3D MRI method was subsequently applied to monitor the displacement of dodecane in the core plug sample by water under continuous flow conditions at an interstitial velocity of \(1.27\times 10^{-6}\,\hbox {m}\,\hbox {s}^{-1}\) (\(0.4\,\hbox {ft}\,\hbox {day}^{-1})\). During the core flood, independent images of water and oil distributions within the rock core plug at a spatial resolution of \(0.31\,\hbox {mm}\times 0.39\,\hbox {mm} \times 0.39\,\hbox {mm}\) were acquired on a timescale of 16 min per image. Using this technique the spatial and temporal dynamics of the displacement process have been monitored. This MRI technique will provide insights to structure–transport relationships associated with multiphase displacement processes in complex porous materials, such as those encountered in petrophysics research.     

Glimpses of Flow Development and Degradation During Type B Drag Reduction by Aqueous Solutions of Polyacrylamide B1120

Flow development and degradation during Type B turbulent drag reduction by 0.10 to 10 wppm solutions of a partially-hydrolysed polyacrylamide B1120 of MW \(=\) 18x10⁶ was studied in a smooth pipe of ID \(=\) 4.60 mm and L/D \(=\) 210 at Reynolds numbers from 10000 to 80000 and wall shear stresses Tw from 8 to 600 Pa. B1120 solutions exhibited facets of a Type B ladder, including segments roughly parallel to, but displaced upward from, the P-K line; those that attained asymptotic maximum drag reduction at low Re√ f but departed downwards into the polymeric regime at a higher retro-onset Re√ f; and segments at MDR for all Re√ f. Axial flow enhancement profiles of S\(^{\prime }\) vs L/D reflected a superposition of flow development and polymer degradation effects, the former increasing and the latter diminishing S\(^{\prime }\) with increasing distance downstream. Solutions that induced normalized flow enhancements S\(^{\prime }\)/S\(^{\prime }_{\mathrm {m}} <\) 0.4 developed akin to solvent, with L_e,p/D \(=\) L_e,n/D \(<\) 42.3, while those at maximum drag reduction showed entrance lengths L_e,m/D \(\sim \) 117, roughly 3 times the solvent L_e,n/D. Degradation kinetics were inferred by first detecting a falloff point (Re√f^∧, S\(^{{\prime }\wedge }\)), of maximum observed flow enhancement, for each polymer solution. A plot of S\(^{{\prime }\wedge }\)vs C revealed S\(^{{\prime }\wedge }\)linear in C at low C, with lower bound [S\(^{\prime }\)] \(=\) 5.0 wppm^??1, and S\(^{{\prime }\wedge }\) independent of C at high C, with upper bound S\(^{\prime }_{\mathrm {m}} =\) 15.9. The ratio S\(^{\prime }\)/S\(^{{\prime }\wedge }\) in any pipe section was interpreted to be the undegraded fraction of original polymer therein. Semi-log plots of (S\(^{\prime }\)/S\(^{{\prime }\wedge }\)) at a section vs transit time from pipe entrance thereto revealed first order kinetics, from which apparent degradation rate constants k_deg s^??1 and entrance severities ?ln(S\(^{\prime }\)/S\(^{{\prime }\wedge }\))₀ were extracted. At constant C, k_deg increased linearly with increasing wall shear stress Tw, and at constant Tw, k_deg was independent of C, providing a B1120 degradation modulus (k_deg/Tw) \(=\) (0.012 \(\pm \) 0.001) (Pa s)^??1 for 8 \(<\) Tw Pa \(<\) 600, 0.30 \(<\) C wppm \(<\) 10. Entrance severities were negligible below a threshold Twe \(\sim \) 30 Pa and increased linearly with increasing Tw for Tw \(>\) Twe. The foregoing methods were applied to Type A drag reduction by 0.10 to 10 wppm solutions of a polyethyleneoxide PEO P309, MW \(=\) 11x10⁶, in a smooth pipe of ID \(=\) 7.77 mm and L/D \(=\) 220 at Re from 4000 to 115000. P309 solutions that induced S\(^{\prime }\)/S\(^{\prime }_{\mathrm {m}} <\) 0.4 developed akin to solvent, with L_e,p/D \(=\) L_e,n/D \(<\) 23, while those at MDR had entrance lengths L_e,m/D \(\sim \) 93, roughly 4 times the solvent L_e,n/D. P309 solutions described a Type A fan distorted by polymer degradation. A typical trajectory departed the P-K line at an onset point Re√ f* followed by ascending and descending polymeric regime segments separated by a falloff point Re√f^∧, of maximum flow enhancement; for all P309 solutions, onset Re√ f* = 550 \(\pm \) 100 and falloff Re√f^∧ = 2550 \(\pm \) 250, the interval between them delineating Type A drag reduction unaffected by degradation. A plot of falloff S\(^{{\prime }\wedge }\) vs C for PEO P309 solutions bore a striking resemblance to the analogous S\(^{{\prime }\wedge }\) vs C plot for solutions of PAMH B1120, indicating that the initial Type A drag reduction by P309 after onset at Re√ f* had evolved to Type B drag reduction by falloff at Re√f^∧. Presuming that Type B behaviour persisted past falloff permitted inference of P309 degradation kinetics; k_deg was found to increase linearly with increasing Tw at constant C and was independent of C at constant Tw, providing a P309 degradation modulus (k_deg/Tw) \(=\) (0.011 \(\pm \) 0.002) (Pa s)^??1 for 4 \(<\) Tw Pa \(<\) 400, 0.10 \(<\) C wppm < 5.0. Comparisons between the present degradation kinetics and previous literature showed (k_deg/Tw) data from laboratory pipes of D \(\sim \) 0.01 m to lie on a simple extension of (k_deg/Tw) data from pipelines of D \(\sim \) 0.1 m and 1.0 m, along a power-law relation (k_deg/Tw) \(=\) 10^??5.4.D^??1.6. Intrinsic slips derived from PAMH B1120 and PEO P309-at-falloff experiments were compared with previous examples from Type B drag reduction by polymers with vinylic and glycosidic backbones, showing: (i) For a given polymer, [S\(^{\prime }\)] was independent of Re√ f and pipe ID, implying insensitivity to both micro- and macro-scales of turbulence; and (ii) [S\(^{\prime }\)] increased linearly with increasing polymer chain contour length Lc, the proportionality constant \(\beta =\) 0.053 \(\pm \) 0.036 enabling estimation of flow enhancement S\(^{\prime } =\) C.Lc.β for all Type B drag reduction by polymers.     

Damköhler-Shelkin Paradox in the Theory of Turbulent Flame Propagation,and a Concept of the Premixed Flame at the Intermediate Asymptotic Stage

We formulated a paradox in the theory of turbulent premixed flame in the flamelet regime: discrepancy between the Damköhler (1940) and Shelkin (1943) estimate of the turbulence flame speed \(U_{t} \sim {u}^{\prime }\) in the case of strong turbulence (\({u}^{\prime }>>S_{L} \)) and numerous experiments that show a strong dependence of U_t on the speed of the instantaneous flame S_L. We name this discrepancy the Damköhler-Shelkin paradox. The first aim of the research is to validate and clarify this estimate, which is based on intuitive considerations, as the paradox must be a statement that seems contradictory to observations but is actually true. We analysed the turbulent flame in the context of the original hyperbolic combustion equation that directly describes the leading edge of the flame, which is a locus of the Zel’dovich “leading points” controlling the speed of the turbulent flame. Analysis of the corresponding characteristic equations results in the expression for speed on the steady-state turbulent flame \(U_{t} ={u}^{\prime }\sqrt {1+(S_{L} /{u}^{\prime })^{2}} \), which is the case when \({u}^{\prime }>>S_{L} \) becomes \(U_{t} \cong {u}^{\prime }\). This result confirms and improves the Damköhler-Shelkin estimate \(U_{t} \sim {u}^{\prime }\). The second aim is to resolve the Damköhler-Shelkin paradox. We explain the discrepancy with observations by the fact that turbulent flames are transient due to insufficient residence time in the real burners to reach statistical equilibrium of wrinkle structures of the random flame surface. We consider the transient flame in the intermediate asymptotic stage when the small-scales wrinkles are in statistical equilibrium, while at the same time the large-scale wrinkles are far from equilibrium. The expressions for the flame speed and width, which we deduce using the dimensional analysis and general properties of the ransom surface, \(U_{t} \sim ({u}^{\prime }S_{L})^{1/2}\) and \(\delta _{t} \sim ({u}^{\prime }Lt)^{1/2}\), show that this transient flame is in fact a turbulent mixing layer travelling with constant speed U_t depending on S_L, the intermediate steady propagation (ISP) flame. Qualitative estimations of the times required for the small-scale and large-scale wrinkles to reach statistical equilibrium show that the turbulent Bunsen- and V-flames correspond to the intermediated asymptotic stage, and the turbulent flames with a complete equilibrium structure of the wrinkled flamelet surface are not attainable under laboratory conditions. We present the results of numerical simulations of the impingent flames, which count in favour of the belief that these flames are also transient.