Ag1 ? xMg1 ? x R1 + x(MoO4)3 Ag+-conducting NASICON-like phases, where R = Al or Sc and 0 ≤ x ≤ 0.5

Ag_{1 − x} Mg_{1 − x} R_{1 + x} (MoO₄)₃ NASICON-like solid solutions, where R = Al or Sc and 0 ≤ x ≤ 0.5, were prepared; their crystal lattice parameters and thermal stabilities were determined. Silver-ion conductivity was measured, and conductivity activation energy values were calculated for various temperature ranges. Above 400°C, Ag_{1 − x} Mg_{1 − x} R_{1 + x} (MoO₄)₃ phases have ionic conductivities comparable to the conductivities of sodium-ion and lithium-ion NASICON-like conductors. The conductivity increases as the tervalent cation radius increases or the amount of mobile silver ions increases.     

Synthesis and study of the variable-composition phase Na1?xCo1?xFe1+x(MoO4)3, 0 ≤ x ≤ 0.4, with nasicon structure

The synthesis conditions for variable-composition phase Na_1−x Co_1−x Fe_1+x (MoO₄)₃, 0 ≤ x ≤ 0.4, crystallizing in the nasicon structure type (R $ \bar 3 $ \bar 3 c) were examined. For this phase, the crystallographic parameters were calculated, vibrational spectra were interpreted, and temperature dependence of electrical conductivity, dielectric constant, and dielectric loss tangent were examined.     

Crystal structures of La1 ? xSr2 + x(GeO4)(V1 ? xMoxO4) (x= 0?0.4) solid solutions

The phase compositions of theLaVO₄-SrMoO₄(1) and Sr₂GeO₄-SrMoO₄ (2) binary systems, which bound the Sr₂GeO₄-LaVO₄-SrMoO₄ (3) ternary system, and the LaSr₂(VO₄)(GeO₄)-Sr₂GeO₄+SrMoO₄ section (4) of system 3 are studied at subsolidus temperatures. Systems 1 and 2 consist of a mixture of the initial compounds, and the La_{1 − x} Sr_{2 + x} (GeO₄)(V_{1 − x} Mo _x O₄) (where 0 ≤ x ≤ 0.4) region of substitutional solid solutions with a palmierite structure is formed in system 3. The unit cell parameters of the solid solutions are determined. The distribution of the lanthanum and strontium cations over two positions of the cationic sublattice is described. Original Russian Text ? V.D. Zhuravlev, V.G. Zubkov, A.P. Tyutyunnik, Yu.A. Velikodnyi, N.D. Koryakin, 2009, published in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 1, pp. 135–137.     

Ti掺杂对(LaMn1-xTixO3)0.67(NiMn2O4)0.33(0≤x≤0.7)陶瓷材料微结构及电性能影响

采用氧化物固相法制备(LaMn1-xTixO3)0.67(NiMn2O4)0.33系列NTC(Negative temperature coefficient)复合热敏电阻材料。利用TG/DSC、激光粒度分析、XRD、SEM、阻-温特性和老化性能测试等手段,确定了粉体煅烧温度,表征了粉体的颗粒尺寸、陶瓷体的物相、形貌及其电学特性、稳定性等与Ti掺杂量的关系。结果表明:在1 200~1 300℃烧结温度范围内,(LaMn1-xTixO3)0.67(NiMn2O4)0.33复合体系的电阻率ρ25℃随Ti含量的增加而显著增加;电阻率ρ25℃和B值变化范围分别为4.4~53 179Ω.cm、1 357~3 998 K。125℃下老化1 000 h阻值变化率ΔR/R0均小于0.51%。该复合体系电阻率、B值调整范围较大,稳定性好,是一种具有实际应用价值的NTC热敏电阻材料。     

Phase transitions and ion transport in NASICON materials of composition Li1 + xZr2 ? xInx(PO4)3(x = 0–1)

NASICON materials of composition Li_{1 + x} Zr_{2 − x} In _x (PO₄)₃(x = 0–1) were synthesized. The phase constitution, particle size, and conductivity of these materials were studied as s function of synthesis temperature. High-temperature X-ray powder diffraction was used to study phase transitions in the materials synthesized. Low levels (x ≤ 0.1) partial substitution of indium for zirconium considerably increase the lithium ion conductivity and reduce the activation energy for conduction compared to the parent compound.     

Cation mobility in modified Li1 + xTi2 ? xGax(PO4)3 lithium titanium NASICON phosphates

Li_{1 +x} Ti_{2 − x} Ga _x (PO₄)₃(x= 0−0.2) NASICON double phosphates are prepared and studied by high-temperature X-ray diffraction, ⁷Li NMR spectroscopy, impedance spectroscopy, and calorimetry. Doping with Ga³⁺ cations increases cation mobility in LiTi₂(PO₄)₃. Ion conductivity, NMR spectroscopy, and calorimetry data imply the occurrence of a phase transition in LiTi₂(PO₄)₃ and in products of partial gallium-for-titanium substitution. Original Russian Text ? I.Yu. Pinus, I.V. Arkhangel’skii, N.A. Zhuravlev, A.B. Yaroslavtsev, 2009, published in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 8, pp. 1235–1239.     

Cation mobility in modified Li1 ? xTi2 ? xNbx(PO4)3 lithium titanium NASICON phosphates

Li_{1 − x} Ti_{2 − x} Nb _x (PO₄)₃ NASICON materials are prepared and studied by X-ray diffraction, ⁷Li and ³¹P NMR spectroscopy, and impedance spectroscopy. Vacancy mobility in Li_{1 − x} Ti_{2 − x} Nb _x (PO₄)₃ is lower than interstitial lithium mobility. Nb⁵⁺ cations with low doping levels increase cation mobility in LiTi₂(PO₄)₃. Original Russian Text ? I.Yu. Pinus, I.A. Stenina, A.I. Rebrov, N.A. Zhuravlev, A.B. Yaroslavtsev, 2009, published in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 8, pp. 1240–1244.     

Synthesis and X-ray diffraction study of complex oxides of the Zn2 ? x(ZraSnb)1 ? xFe2xO4 composition

A multicomponent system of complex refractory oxides of the composition Zn_{2 − x} (Zr _a Sn _b )_{1 − x} Fe_2x O₄ (a + b = 1; a: b = 1: 5, 1: 4, 1: 3, 1: 2, 1: 1, 2: 1, 3: 1, 4: 1; x = 0−1.0; Δx = 0.05) was studied by X-ray diffraction. The samples were prepared from oxides of appropriate metals by low-temperature plasma synthesis (hydrogen-oxygen flame). Two phases with wide homogeneity ranges were identified: α phase crystallized in the crystal system of inverse cubic spinel and β phase with the structure of tetragonal spinel. The phase boundaries were found. Structural data are presented for about 100 solid solutions.     

Synthesis and study of the properties of K2Y1 ? x ? yEuxTby(MoO4)(PO4) and K2Y1 ? x ? yEuxTby(MoO4)(PO4)1?δ(VO4)δ solid solutions

Al synthesized samples are isostructural and crystallize in the orthorhombic symmetry system, space group Ibca. Particles of the final product of ∼200 nm in size have been obtained. The introduction of the vanadate anion into the matrix composition leads to the lowering of the symmetry of the Eu³⁺ environment and to the rise of the defect luminescence at 450–550 nm because of the unit cell distortion. The luminescence of defects in terbium-europium-containing samples is determined by the sample surface area, which decreases on annealing. The τ, W ₀ and γ parameters of the luminescence kinetics of the samples have been determined.     

Cationic mobility in Li3?2xNbxFe2?x(PO4)3 complex phosphates

Synthesis and ionic conductivity of Li_3−2x Nb _x Fe_2−x (PO₄)₃ complex phosphates were studied by X-ray powder diffraction and impedance spectroscopy. These phosphates are formed only at 900–1000°C. Variations in their thermal expansivity and unit cell parameters induced by aliovalent doping were characterized. The conductivity of these materials increases monotonically in the series Li_0.5Nb_1.25Fe_0.75(PO₄)₃-LiNbFe(PO₄)₃ and Li_1.2Nb_0.9Fe_1.1(PO₄)₃-Li₃Fe₂(PO₄)₃, which is explained by consecutive occupation of the Li(1) and Li(2) positions in their structures. Original Russian Text ? A.R. Shaikhlislamova, I.A. Stenina, A.B. Yaroslavtsev, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 12, pp. 1957–1962.     

Phases of variable composition in the system Ba3 ? x Sr x Er(BO3)3 (0 ≤ x ≤ 3.0)

The possibility of preparing two series of solid solutions in the system Ba_{3 − x} Sr _x Er(BO₃)₃ (0 ≤ x ≤ 3.0), crystallizing in different structural types, was examined. Samples of the phases of variable composition were synthesized by the method of solid-phase reactions, and their X-ray phase analysis was done. The X-ray diffraction characteristics of the phases synthesized were determined. Original Russian Text ? T.N. Khamaganova, 2008, published in Zhurnal Prikladnoi Khimii, 2008, Vol. 81, No. 7, pp. 1210–1212.     

BaCe0.8-xNbxGd0.2O3-δ(0≤x≤0.45)的制备及性能研究

采用高温固相反应法制备了质子导体BaCe_0.8-xNb_xGd_0.2O_3-δ(0≤x≤0.45)。结合XRD、SEM、EIS等技术对其物相、微观形貌、稳定性及电导率进行了研究。结果表明,在1 600 ℃烧结5 h制备的质子导体BaCe_0.8-xNb_xGd_0.2O_3-δ(0≤x≤0.45)均能保持主相为斜方晶的钙钛矿结构。Nb的加入可明显提高烧结样品的致密性及在CO₂和水蒸气气氛下的稳定性。在湿润H₂/Ar(0.4%,V/V)气氛中800 ℃下,x=0.1样品的电导率为5.73 mS·cm^-1,电导活化能为0.35 eV,与x=0的样品相当。     

Synthesis and thermal characterization of NZP compounds Na1?xLixZr2(PO4)3 (x?=?0.00–0.75)

Sodium zirconium phosphate (NZP) composition Na_1−x Li _x Zr₂(PO₄)₃, x = 0.00–0.75 has been synthesized by method of solid state reaction method from Na₂CO₃·H₂O, Li₂CO₃, ZrO₂, and NH₄H₂PO₄, sintering at 1050–1250 °C for 8 h only in other to determine the effect on thermal properties, such as the phase formation of the compound. The materials have been characterized by TGA and DTA thermal analysis methods from room temperature to 1000 °C. It was observed that the increase in lithium content of the samples increased thermal stability of the samples and the DTA peaks shifted towards higher temperatures with increase in lithium content. The thermal stability regions for all the sample was observed to be from 640 °C. The sample with the highest lithium content, x = 0.75, exhibited the greatest thermal stability over the temperature range.     

Ca0.8-2x(YbxTb0.1Na0.1+x)2xWO4近红外下转换荧光粉水热合成及发光性质

一种在近红外光谱(NIR)区域高效的量子剪裁现象已在Ca_0.8-2x(Yb_xTb_0.1Na_0.1+x)_2xWO₄(x=0~0.2)荧光粉中得到证实,该量子剪裁通过吸收紫外线光子发射近红外光子,能量传递包括两个协同过程,分别是WO₄^2-基团到Yb³⁺离子和WO₄^2-基团到Tb³⁺离子再到Yb³⁺离子,Yb³⁺离子的掺杂浓度对荧光粉在可见光和近红外光谱的发光,荧光寿命和量子效率的影响已进行了详细得研究。经计算,量子效率最大达到135.7%。铽与镱共掺钨酸钙的近红外量子剪裁,通过吸收太阳光谱的1个紫外光到2个1000nm光子(2倍光子数增加)的下转化机制实现高效率硅太阳能电池的途径。     

Ca0.8-2x(YbxTb0.1Na0.1+x)2xWO4近红外下转换荧光粉水热合成及发光性质

一种在近红外光谱(NIR)区域高效的量子剪裁现象已在Ca0.8-2x(Ybx Tb0.1Na0.1+x)2x WO4(x=0～0.2)荧光粉中得到证实,该量子剪裁通过吸收紫外线光子发射近红外光子,能量传递包括两个协同过程,分别是WO42-基团到Yb3+离子和WO42-基团到Tb3+离子再到Yb3+离子,Yb3+离子的掺杂浓度对荧光粉在可见光和近红外光谱的发光,荧光寿命和量子效率的影响已进行了详细的研究。经计算,量子效率最大达到135.7%。铽与镱共掺钨酸钙的近红外量子剪裁,通过吸收太阳光谱的1个紫外光子到2个1 000 nm光子(2倍光子数增加)的下转化机制实现高效率硅太阳能电池的途径。     

Structural and electric properties of the Ce0.8(Sm1 ? xCax)0.2O2 ? δ system (x = 0.0–1.0)

CeO₂-based solid solutions with a fluorite structure are promising materials as electrolytes of medium-temperature electrochemical devices. This work presents the results of systematic studies of structural and electric properties and oxygen nonstoichiometry of the Ce_0.8(Sm_{1 − x} Ca _x )_0.2O_{2 − δ} system in a wide range of concentrations of 0 < x < 1 performed in order to establish the causes affecting the system conductivity and its behavior in a reducing medium. It is found that a single-phase solid solution of the fluorite type is formed in the whole concentration range. Parameters of its lattice cells decrease linearly at an increase in the concentration of Ca²⁺. Conductivity in air grows when calcium is added due to a decrease in the grain boundary resistance. The maximum conductivity in air was obtained for the composition of Ce_0.8(Sm_0.8Ca_0.2)_0.2O_{2 − δ} and is 13.71 × 10⁻³ S/cm at 873 K. Studies of the dependence of conductivity of the partial pressure of oxygen showed that electron conductivity is observed at a higher oxygen partial pressure at an increase in the temperature and calcium concentration. The critical partial pressure of oxygen ( p_O2 ^* )\left( {p_{O_2 }^* } \right) for the compositions of Ce_0.8(Sm_{1 − x} Ca _x )_0.2O_{2 − δ} with x = 0; 0.2, and 0.5 is 1.83 × 10⁻¹⁶, 1.73 × 10⁻¹³, and 3.63 × 10⁻¹³ atm at 1173 K, respectively, and 2.76 × 10⁻²¹, 5.05 × 10⁻¹⁸, and 1.31 × 10⁻¹⁸ atm at 1023 K.     

Ca2-3xLa8+2x□x(SiO4)6O2的合成及其导电性能的研究

The silicate oxyapatites Ca_2-3xLa_8+2x□_x(SiO₄)₆O₂(x=0, 0.17, 0.33, 0.50, 0.67) was synthesized via a sol-gel method at low temperature. The apatite phases have been characterised by X-ray diffraction (XRD), conducting properties was studied by electrical chemistry impedance spectroscopy (EIS). The conductivity of La_9.33□_0.67(SiO₄)₆O₂ is 1.58×10^-3 S·cm^-1 at 700 ℃, it is higher about 4 270 times than that of Ca₂La₈(SiO₄)₆O₂, the activation energy is decreasing from 1.37 eV to 0.84 eV. With cation vacancies increasing,the conducting mechanism is gradually translation from a direct linear pathway free oxygen ion conduction to a curve pathway interstitial oxygen ion conduction. The electrical conductivities is almost independent of the oxygen partial pressure, this suggests that the oxyapatites exhibited almost pure O^2- ion conduction over a wide range of oxygen partial pressure.     

Conductivity of potassium-cationic solid electrolytes in the K0.85Pb0.075(Fe1 ? xAlx)O2 system

New potassium-conducting solid electrolytes in the mixed ferrite-aluminate system K_0.85Pb_0.075(Fe_{1 − x} Al _x )O₂ are synthesized and studied. The electrolytes exhibit high ionic conductivity in the studied temperature range of 350 to 750°C (approximately 10⁻² S/cm at 400°C and approximately 10⁻¹ S/cm at 700°C). An increase in the conductivity with increasing concentration of iron in the specimens is a general tendency. However, in a wide range of compositions (from x = 0.2 to x = 0.9), the conductivity only slightly depends on x. Possible reasons for the effect of Fe/Al ratio in the structure of solid electrolytes on their transport properties are discussed.     

Solid solutions of Ba2(In1 ? xAlx)2O5: Structural evolution and hydration processes

Solid solutions of the composition Ba₂(In_{1 − x} Al _x )₂O₅[VO]₁ (0 ≤ x ≤ 0.20) with an incomplete oxygen sublattice were obtained. It was established that, along with an increase in parameter x, there is disordering of oxygen vacant positions and a transition from the structure of brownmillerite to that of defect perovskite. It was demonstrated that the phases under study are characterized by an ability for reversible interaction with water vapors in the temperature range 150–450°C. During this process, proton defects, predominantly in the form of OH⁻ groups, are formed in the oxide structure. We conclude that in a number of solid solutions, the amount of intercalated water declines upon an increase in the aluminum content.     

Specifics of pyrohydrolytic and solid-phase syntheses of solid solutions in the (MgGa2O4)x(MgFe2O4)1 ? x system

This work demonstrates the possibility of preparing solid solutions in the (MgGa₂O₄) _x (MgFe₂O₄)_{1 − x} system by pyrohydrolytic and solid-phase methods. It is shown that the products obtained have different specific surface areas depending on the ratio between metal nitrates and citric acid. The composition dependence of the unit cell parameter deviates considerably from the Vegard’s rule. The compounds obtained are found to be stable up to 300°C, which makes them candidate materials for electronics.