EFFECT OF THE COMPOSITION OF m-CRESOL/H2O SOLVENT ON HYDRODYNAMIC PROPERTIES OF NYLON 6

The intrinsic viscosity [ η], Huggins constant (KH), [ η]0, α3 and flow activation energy values of nylon 6 have been measured in water/m-cresol (0/100-20/80) systems at different temperatures (20-60℃). It has been found that the intrinsic viscosity, [η]0 and α3 increase with the increase in water contents in m-cresol up to 15% and then decrease. They increase with the increase in temperature irrespective of solvent composition. It has been noted that the percent increase of α3 is the highest at 60℃ and the lowest at 20℃ for a particular solvent system. The intrinsic viscosity data obey Arrhenius equation over the considered conditions. The activation energy and the KH values decrease very sharply with the addition of water,giving a minimum value at 15% of water and then increase slowly. The variation of all the parameters has been explained in terms of variation in thermodynamic quality of solvent with the addition of water to m-cresol and change in temperature,resulting in the change of conformational and orientational properties of polymer molecules. This change of solvent quality also results in variation of selective sorption of solvent over the polymer, such as hydrogen bonding, etc.     

Antioxidant Activity of Substituted Enterolactone Derivatives in the Gas Phase and Water

ABSTRACT The antioxidant activity of ortho and meta substituted Enterolactone derivatives has been investigated in the gas phase and water.The reaction enthalpies of antioxidant activity of the studied derivatives have been calculated and compared with the corresponding values of Enterolactone.Results show that EWG substituents increase the BDE and IP,while the EDG ones rise in the PA.The Enterolactone derivatives with the lowest BDE,IP and PA values were identified as the compounds with high antioxidant activity.Results show that the substituents in the ortho position have high potential for the synthesis of novel Enterolactone derivatives.Results show that Enterolactone derivatives can processes their protective role via HAT and SPLET mechanism in gas phase and solvent,respectively.The calculated reaction enthalpies of the substituted Enterolactones have linear dependence with Hammett constants and EHOMO that can be utilized in the selection of suitable substituents for the synthesis of novel antioxidants based on Enterolactone.     

POTENTIOMETRIC BEHAVIOR OF CHELATING ION EXCHANGE RESIN IN WATER AND IN ETHANOL-WATER MIXTURES

The potentiometric behavior of the chelating ion exchange resin D751 containing iminodiacetic acid groups has been studied at 25℃ by batch titration with alkali and acid in water and in ethanol - water mixture solvent. The titrtion curves, the amount of chemically bound counter-ions and invasive electrolytes in the resin phase,and the solvent contents of the resin have been investigated.     

Solubilities of benzene, toluene and diphenyl in the t-butyl alcohol+water mixtures and hydrophobic interaction

The solubilitices of benzene, toluene and diphenyl in mixed solvents of t-butyl alcohol (TBA) and water at 283.15, 288.15, 293.15 and 298.15 K have been determined by spectrophotometry. The mole fraction of TBA [x (TBA)] in the mixed solvent are 0.000, 0.010, 0.020, 0.030, 0.040, 0.045, 0.050, 0.060, 0.080 and 0.100, respectively. The standard Gibbs energies of solution of benzene, toluene and diphenyl in the mixed solvent have also been calculated based on the solubility data. The hydrophobic interactions (HI) for the pairs of benzene-benzene, methane-benzene and methane-methane in the mixed solvent were calculated and discussed.     

Effect of Different Salts on the Solubilities of Benzene and Diphenyl in t—Butyl Alcohol—Water Mixture and Hydrophobic Interaction

The solubilities of benzene and diphenyl in mixed solvents of t-butyl alcohol (TBA) and water with different salts have been determined at T=298.15,303.15,308.15 and 313.15K.The molar fraction of TBA [x(TBA)] in mixed solvent is 0.045,and the molality of the salts (ms) in mixed solvents are 0.000,0.250,0.500,0.750 and 1.000mol/kg ,respectively.The standard Gibbs energies of solution of benzene and diphenyl in the mixed solvents have also been calculated based on the solubility data.The effects of different salts on the hydrophobic interaction (HI) for benzene-benzene pair in the systems were discussed.     

KINETICS STUDIES OF MINERAL-WATER REACTIONS IN HYDROTHERMAL FLOW SYSTEMS AT ELEVATED TEMPERATURES AND PRESSURES

This paper describes new experimental results on mlneral-water reaction kinetics obtained in plug-flow systems at high temperatures and pressures. As an example, the rates of reaction between calcite, fluorite, albite and water in the continuous flowing system have been measured in three separate studies. All experiments are carried out by suspending a sample bag in the plug-flow vessel, by pumping water at carefully controlled rates through the vessel, and by collecting and analyzing the reacted solution. In addition, the reaction mechanisms of fluorite and albite in a packed bed reactor have been studied with the aid of an axial dispersion model. The main factors controlling the effective dissolution rate with respect to temperature, solvent flow rate, and chemistry of the input solutions have been evaluated. It is also found that a non-steady state process is, in some cases, still observed, even under conditions where steady state conditions should have been attained. These results provide informatio     

SOLVENT QUALITY AND SOLUTION BEHAVIOR OF NYLON 12

The refractive index increment,dynamic and static laser light scattering,intrinsic viscosity[η]and Huggins constant(K_H)of nylon 12 have been measured in m-cresol and sulphuric acid/water system at 10-60℃.The intrinsic viscosity,R_H,R_g,A_2,and(~2)~(1/2)(calculated from viscosity data)and"a"values of nylon 12 are found to be higher in m-cresol than in sulphuric acid.All these parameters decrease with the increase in water contents in sulphuric acid.The refractive index increment,K_H and activation energy show an opposite trend to that of[η].The intrinsic viscosity,R_H,R_g,A_2, and(~2)~(1/2) have maximum values around 30-40℃in sulphuric acid/water system,whereas in m-cresol they fall at about 20℃.It has been concluded that the variation in size,interaction parameter(second virial coefficient),[η]and K_H of the polymer solutions with the alteration in solvent composition and temperature are the out come of change in thermodynamic quality of solvents,selective adsorption,hydrogen bonding and conformational transitions.It has also been concluded that the increase in temperature first enhances the quality of the solvent,encourages hydrogen bonding and specific adsorption, and then deteriorates,bringing conformational transitions in the polymer molecules.However,the addition of water to sulphuric acid continuously deteriorates the solvent quality.This characteristic of the solvent system brings conformational changes in the polymer especially at low temperatures.     

POTENTIOMETRIC BEHAVIOR OF CHELATING ION EXCHANGE RESIN IN WATER AND IN ETHANOL—WATER MIXTURES

The potentiometric behavior of the chelating ion exchange resin D751 containing iminodiacetic acid groups has been studied at 25℃ by batch titration with alkali and acid in water and in ethanol-water mixture solvent.The titrtion curves,the amount of chemically bound counter-ions and invasive electrolytes in the resin phase,and the solvent contents the resin have been investigated.     

FORMATION OF FLOWER-LIKE AGGREGATES FROM SELF-ASSEMBLING OF MICELLES WITH PEO SHELLS AND CROSS-LINKED POLYACRYLAMIDE CORES

Amphiphilic block copolymers,poly(ethylene oxide)-b-poly(N-acryloxysuccinimide) (PEO-b-PNAS) with various molecular weights have been successfully synthesized by atom transfer radical polymerization (ATRP) of NAS using functionalized PEO (PEO-Br) as ATRP macroinitiator.The self-assembling of the block copolymers in water,which is a good solvent for PEO and a non-solvent for PNAS.yielded spherical core-shell micelles with PNAS as core and PEO as shell.The cross-linked reaction of oxysuccinimide in PNAS ch...     

Effects of Explicit and Implicit Solvent Models on the Hydrolysis Cleavage of N-Glycosidic Bond in 8-Oxo-7,8-dihydro-2?-deoxyguanosine

8-Oxoguanine(8-oxoG), a critical mutagenic DNA lesion induced by reactive oxygen species, gives rise to a G·C→T·A transversion during replication and thereby must be repaired. The effects of explicit and implicit solvent molecules on the hydrolysis cleavage of N-Glycosidic bond in 8-oxo-7,8-dihydro-2'-deoxyguanosine(8-oxo-dG) have been systematically clarified in the present work based upon two types of computational models. Detailed potential energy surface(PES) scans and full unconstraint optimizations for all the representative points on PESs were carried out at the B3LYP/6-31+G(d) level of theory. The effect of implicit solvent was tested by single-point calculation at the SCRF/IEF-PCM model. The results illustrate that the direct hydrolysis model involving one explicit water molecule can't provide a complete depiction of the hydrolysis process of 8-oxo-dG, attributed to the insufficiency of nucleophile activation and leaving group stabilization. The expansion hydrolysis model involving four explicit water molecules, however, facilitates discrete proton transfer and therefore produces smooth reaction surfaces for both the dissociative(SN1) and concerted(SN2) pathways. The presence of the implicit solvent substantially lowers all activation energies and the SN1 process is more favorable than the SN2 process. The data and insights present here agree well with the experimental results and have given out a baseline for the enzymatic deglycosylation reaction of 8-oxo-dG.     

Mechanistic insight on (E)‐methyl 3‐(2‐aminophenyl)acrylate cyclization reaction by multicatalysis of solvent and substrate

The reaction mechanism of (E)‐methyl 3‐(2‐aminophenyl)acrylate ( A ) with phenylisothiocyanate ( B ) as well as the vital roles of substrate A and solvent water were investigated under unassisted, water‐assisted, substrate A ‐assisted, and water‐ A ‐assisted conditions. The reaction proceeds with four processes via nucleophilic addition, deprotonation and protonation, intramolecular cyclization with hydrogen transfer, and keto–enol tautomerization. According to the different H‐shift mode, two possible types of H‐shift P1 and P2 are carefully investigated to identify the most preferred pathway, differing in the ? NH₂ group deprotonation and ? CH group of A protonation processes. It is found that substrate A and water not only act as reactant and solvent, but also as catalyst, proton shuttle, and stabilizer in effectively lowering the energy barrier. Therefore, the results demonstrate that the strong donating and accepting ability of ? NH₂ group on A and the presence of bulk water are the keys to the title reaction proceed. © 2016 Wiley Periodicals, Inc.     

A Hybrid statistical mechanics—quantum chemical model for proton transfer in 5‐azauracil and 6‐azauracil in water solution

A hybrid statistical physics—quantum‐chemical methodology was implemented to study the water‐assisted intramolecular proton‐transfer processes in 5‐ and 6‐azauracils in aqueous solutions. The solvent effects were included in the model by explicit inclusion of two pairs of water molecules, which model the relevant part of the first hydration shell around the solute. The position of these water molecules was initially estimated by carrying out a classical Metropolis of dilute water solutions of the title compounds and subsequently analyzing solute–solvent intermolecular interactions in the Monte Carlo‐generated configurations. Sequentially to the statistical physics simulation, ab initio quantum mechanical (QM) level of theory was implemented. The effects of the water as solvent (at ab initio QM level) were introduced at two different levels—using solute–solvent clusters (four‐water molecules) and using the same clusters embedded in an external continuum. Full geometry optimizations of these complexes were carried out at MP2/6–31 + G(d, p) and conductor‐polarizable continuum model (C‐PCM)/MP2/6–31 + G(d, p). Single point calculations were performed at CCSD(T)/6–31 + G(d, p)//MP2/6–31 + G(d, p) computational level to obtain more accurate energies. According to our calculations hydrated azauracils should exist in three forms: mainly dioxo form and two hydroxy forms. The calculated proton transfer activation energies for tautomeric reactions of 5‐azauracil and 6‐azauracil show different pictures for these two compounds. According to C‐PCM/MP2/6–31 +G(d, p) data, water‐assisted proton transfer in 5‐azauracil realizes through two parallel reactions: 1,3,5‐triazine‐2,4(1H,3H)‐dione → 6‐hydroxy‐1,3,5‐triazin‐2(1H)‐one and 1,3,5‐triazine‐2,4(1H,3H)‐dione → 4‐hydroxy‐1,3,5‐triazin‐2(1H)‐one. Tautomeric equilibrium in 6‐azauracil in water could occur by two contiguous reactions: 1,2,4‐triazine‐3,5(2H,4H)‐dione → 5‐hydroxy‐1,2,4‐triazin‐3(2H)‐one and 5‐hydroxy‐1,2,4‐triazin‐3(2H)‐one → 3‐hydroxy‐1,2,4‐triazin‐5(2H)‐one. The proton transfer investigated reactions in 5‐ and 6‐azauracils involve concerted atomic movement. © 2015 Wiley Periodicals, Inc.     

Kinetics and mechanism of the aminolysis of O‐phenyl 4‐nitrophenyl dithiocarbonate in aqueous ethanol

The reactions of the title substrate (1) with a series of secondary alicyclic amines are subjected to a kinetic investigation in 44 wt% ethanol‐water, at 25.0°C, ionic strength 0.2 M (KCl). Under amine excess over the substrate, pseudo‐first‐order rate coefficients (k_obs) are obtained. Plots of k_obs against [NH], where NH is the free amine, are nonlinear upwards, except the reactions of piperidine, which show linear plots. According to the kinetic results and the analysis of products, a reaction scheme is proposed with two tetrahedral intermediates, one zwitterionic (T^±) and another anionic (T⁻), with a kinetically significant proton transfer from T^± to an amine to yield T⁻ (k₃ step). By nonlinear least‐squares fitting of an equation derived from the scheme to the experimental points, the rate microcoefficients involved in the reactions are determined. Comparison of the kinetics of the title reactions with the linear k_obs vs. [NH] plots found in the same aminolysis of O‐ethyl 4‐nitrophenyl dithiocarbonate (2) in the same solvent shows that the rate coefficient for leaving group expulsion from T^± (k₂) is larger for 2 due to a stronger push by EtO than PhO. The k₃ value is the same for both reactions since both proton transfers are diffusion controlled. Comparison of the title reactions with the same aminolysis of phenyl 4‐nitrophenyl thionocarbonate (3) in water indicates that (i) the k₂ value is larger for the aminolysis of 1 due to the less basic nucleofuge involved and the small solvent effect on k₂, (ii) the k₃ value is smaller for the reactions of 1 due to the more viscous solvent, (iii) the rate coefficient for amine expulsion from T^± (k₋₁) is larger for the aminolysis of 1 than that of 3 due to a solvent effect, and (iv) the value of the rate coefficient for amine attack (k₁) is smaller for the aminolysis of 1 in aqueous ethanol, which can be explained by a predominant solvent effect relative to the electron‐withdrawing effect from the nucleofuge. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 839–845, 1999     

Determination of 3,5,6‐trichloro‐2‐pyridinol,phoxim and chlorpyrifos‐methyl in water samples using a new pretreatment method coupled with high‐performance liquid chromatography

A novel low‐density solvent‐based vortex‐assisted surfactant‐enhanced‐emulsification liquid–liquid microextraction with the solidification of floating organic droplet method coupled with high‐performance liquid chromatography was developed for the determination of 3,5,6‐trichloro‐2‐pyridinol, phoxim and chlorpyrifos‐methyl in water samples. In this method, the addition of a surfactant could enhance the speed of the mass transfer from the sample solution into the extraction solvent. The extraction solvent could be dispersed into the aqueous by the vortex process. The main parameters affecting the extraction efficiency were investigated and the optimum conditions were established as follows: 80 μL 1‐undecanol as extraction solvent, 0.2 mmol/L of Triton X‐114 selected as the surfactant, the vortex time was fixed at 60 s with the vortex agitator set at 3000 rpm, the concentration of acetic acid in sample solution was 0.4% v/v and 1.0 g addition of NaCl. Under the optimum conditions, the enrichment factors were from 172 to 186 for the three analytes. The linear ranges were from 0.5 to 500 μg/L with a coefficient of determination (r²) of between 0.9991 and 0.9995. Limits of detections were varied between 0.05 and 0.12 μg/L. The relative standard deviations (n = 6) ranged from 0.26 to 2.62%.     

Influence of Microwave Irradiation on the Lipase‐Catalyzed Ring‐Opening Polymerization of ε‐Caprolactone

Summary: The microwave (MW)‐assisted lipase‐catalyzed ring‐opening polymerization of ε‐caprolactone in boiling solvents was investigated for the first time. In case of boiling toluene or benzene the MW‐assisted reaction proceeded significantly slower compared to oil bath heating. On the other hand, using boiling diethyl ether as solvent, an increase of the polymerization rate due to MW irradiation was found. Yield, molecular weight measurements, and MALDI‐TOF analysis supported the results.

Reactivity of the MW‐assisted ring‐opening polymerization of ε‐caprolactone compared with conventional thermal heating in different solvents.     

Ultrasound‐Assisted Synthesis of 3‐(Arylamino)‐1‐ferrocenylpropan‐1‐ones

A successful aza‐Michael addition of arylamines to a conjugated enone, acryloylferrocene, has been achieved by ultrasonic irradiation of the mixture of these reactants and the catalyst, i.e., montmorillonite K‐10. This solvent‐free reaction, yielding ferrocene containing Mannich bases, 3‐(arylamino)‐1‐ferrocenylpropan‐1‐ones, considered as valuable precursors in organic synthesis, has been performed by using a simple ultrasonic cleaner. Among 17 synthesized β‐amino ketones, three were new ones, and these were fully characterized by spectroscopic means. X‐Ray crystallographic analysis of three of these crystalline products enabled the insight into the conformational details of these compounds. All compounds were evaluated for their antibacterial activities against six Gram‐positive and five Gram‐negative strains in a microdilution assay. The observed promising antibacterial activity (with a MIC value of 25 μg/ml (ca. 0.07 μmol/ml) as the best result for almost all tested compounds against Micrococcus flavus) seems not only to be compound but also bacterial species‐specific.     

One‐Pot Synthesis of 4‐(2,3‐Dihydro‐2‐hydroxy‐1,3‐dioxo‐1H‐inden‐2‐yl)‐Substituted 1‐Aryl‐1H‐pyrazole‐3‐carboxylates via a Tandem Three‐Component Reaction

The hitherto unreported, highly functionalized 1H‐pyrazole‐3‐carboxylates 3 have been synthesized in good yields via a one‐pot three‐component domino reaction of phenylhydrazines, dialkyl acetylenedicarboxylates, and ninhydrin under mild conditions for the first time. No co‐catalyst or activator is required for this multicomponent reaction, and the reaction is, from an experimental point of view, simple to perform (Scheme 1). The structures of compounds 3 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization/addition reaction is proposed (Scheme 2).     

Preparation of Well‐Defined Poly[(ethylene oxide)‐block‐(sodium 2‐acrylamido‐2‐methyl‐1‐propane sulfonate)] Diblock Copolymers by Water‐Based Atom Transfer Radical Polymerization

Summary: Well‐defined poly[(ethylene oxide)‐block‐(sodium 2‐acrylamido‐2‐methyl‐1‐propane sulfonate)] diblock copolymers [P(EO_m‐b‐AMPS_n)], have been obtained by water‐based ATRP using α‐methoxy‐ω‐(2‐methylbromoisobutyrate) poly(ethylene oxide)s (MeO‐P[EO]_m‐BrⁱB with m ranging from 12 to 113) and CuBr · 2Bpy (Bpy for 2,2′‐bipyridyl) as macroinitiator and catalytic complex, respectively. Compared to direct polymerization in water, it has been demonstrated that the water/methanol (3:1, v/v) mixture is better suited for predicting the final number‐average molar mass from the initial monomer‐to‐macroinitiator molar ratio and achieving a quite narrow polydispersity, even at high monomer conversion ( ≈ 1.4 at 80% conversion). The effect of temperature, solvent mixture composition and addition of NaCl salt on the polymerization rate and extent of control over the copolymer molecular parameters have been highlighted as well.

     

Ultrasound‐Assisted Wittig Reaction: A Short,Efficient Synthesis of 2‐Methoxy‐6‐Alkyl‐1,4‐Benzoquinones

A short, efficient synthesis of 2‐methoxy‐6‐alkyl‐1,4‐benzoquinones is described. Ultrasound‐assisted Wittig reaction of alkyltriphenyl phosphonium bromides with o‐vanillin in basic aqueous conditions followed by reduction with Na/n‐BuOH gave 2‐methoxy‐6‐alkylphenols. Oxidation of 2‐methoxy‐6‐alkylphenols with Fremy's salt produced the title compounds.     

溴化镁催化的1,2,3,4-四氢吡啶酮无溶剂合成研究

An efficient and environmentally friendly procedure for the one-pot synthesis of tetrahydropyrimidinones from aldehydes, β-diketones and urea/thiourea by using magnesium bromide as an inexpensive and easily available catalyst under solvent-free conditions was described. Compared with the classical Biginelli reaction conditions, this new method has the advantage of good to excellent yields (74%-94%) and short reaction time (45-90 min). The structure of the Biginelli reaction product from β-diketone, salicylaldehyde and urea has been proposed to possess an oxygen-bridge by cyclization (intramolecular Michael-addition).