接触缺陷的振动调制超声导波检测技术研究

针对常规线性超声检测方法无法实现板结构接触类缺陷(如微裂纹、脱粘等)检测问题,将超声导波技术与振动声调制技术相结合,利用稀疏分布传感器发展了一种板结构中接触缺陷非线性超声检测方法。通过低频振动改变缺陷的接触状况,使得通过接触面的高频导波信号的相位和幅值受到调制。对受低频振动调制的超声导波二维时间序列进行时频分析,由于接触类缺陷的存在,在振动调制超声导波序列的时频分布上出现明显的低频振动频率分量。利用提取出的低频振动频率下的超声导波信号,进行了结构接触缺陷成像处理。检测试验表明,基于振动声调制的超声导波缺陷成像方法可以实现结构中的接触类缺陷检测。      

Nonlinear propagation delay and pulse distortion resulting from dual frequency band transmit pulse complexes

A method of acoustic imaging is discussed that potentially can improve the diagnostic capabilities of medical ultrasound. The method, given the name second order ultrasound field imaging, is achieved by the processing of the received signals from transmitted dual frequency band pulse complexes with at least partly overlapping high frequency (HF) and low frequency (LF) pulses. The transmitted HF pulses are used for image reconstruction whereas the transmitted LF pulses are used to manipulate the elastic properties of the medium observed by the HF imaging pulses. In the present paper, nonlinear propagation effects observed by a HF imaging pulse due to the presence of a LF manipulation pulse is discussed. When using dual frequency band transmit pulse complexes with a large separation in center frequency (e.g., 1:10), these nonlinear propagation effects are manifested as a nonlinear HF propagation delay and a HF pulse distortion different from conventional harmonic distortion. In addition, with different transmit foci for the HF and LF pulses, nonlinear aberration will occur.     

Compressive imaging based on multi-scale modulation and reconstruction in spatial frequency domain

Imaging quality is a critical component of compressive imaging in real applications. In this study, we propose a compressive imaging method based on multi-scale modulation and reconstruction in the spatial frequency domain. Theoretical analysis and simulation show the relation between the measurement matrix resolution and compressive sensing(CS)imaging quality. The matrix design is improved to provide multi-scale modulations, followed by individual reconstruction of images of different spatial frequencies. Compared with traditional single-scale CS imaging, the multi-scale method provides high quality imaging in both high and low frequencies, and effectively decreases the overall reconstruction error.Experimental results confirm the feasibility of this technique, especially at low sampling rate. The method may thus be helpful in promoting the implementation of compressive imaging in real applications.     

空间低频光共焦扫描法透过散射介质成象

本文使用4-F光学系统实现低通空间频率滤波,采用空间低频光共焦扫描法透过散射介质成象,实验表明,光路中加入简单的空间滤波系统后,明显改善共焦扫描法的成象质量和分辨率。     

基于成像机理的小波包变换多聚焦图像融合

由于可见光成像系统的聚焦范围有限,因而在成像过程中,除聚焦良好的物体能生成清晰的图像外,该物体前后一定距离外的所有物体都将呈现不同程度的模糊.为了获得场景内所有物体均清晰的图像,在分析了多聚焦图像成像机理的基础上,提出了一种基于小波包变换的融合方法.它是将成像系统先聚焦在一部分对象上,得到其清晰的图像;然后再将其聚焦在另一部分对象上,得到另一清晰的图像;最后把这两幅实验图像加以融合,从而获得场景内所有物体均清晰的图像.实验结果表明,基于小波包变换的融合方法能够将信号的频带进行多层次划分,对高频成分也能进一步地分解,可有效综合多聚焦图像.     

基于平均吸收的太赫兹波振幅成像研究

提出了一种基于一定频率内平均吸收的太赫兹(THz)波振幅成像新方法。太赫兹波频率在0.1～10 THz之间,波段位于红外和微波之间。太赫兹波成像技术的一个显著特点是信息量大,如何对每个样品点的大量信息进行处理提取有用信息重构出样品的图像是一项关键技术。选用中间挖空有“THz”字样的白纸为样品作太赫兹波成像研究,首先探讨了时域和频域上几种常用太赫兹波振幅成像方法所反映的样品信息及其特点,进一步使用提出的基于一定频率内平均吸收的太赫兹波振幅成像新方法对样品进行图像重构。实验结果表明这种新方法可以很好的反映样品的真实信息,反映了样品在一定频率范围内由于吸收而引起的效果的综合,与吸收系数和厚度相关,离散效应得到了很好的消除,相对几种常用的太赫兹波振幅成像方法能够得到更清晰的图像。此新方法尤其适用于结构简单的样品,能够成为几种常用振幅成像方法的有力补充。     

利用相位模板实现数字全息超分辨成像

为了简化数字全息超分辨记录系统,分别在其物光和参考光部分引入一块相位模板,以获得垂直和倾斜方向照明物体的光束和具有不同载波频率的参考光束.当这些具有不同照射方向的光透过物体后,可以使CCD在位置固定的情况下记录到携带低频和高频信息的物体衍射场,不同载波频率的参考光则保证了高频和低频信息在复合全息图的频谱面上能够相互分离.实验结果证明,通过将记录到的物体高频和低频信息合成,可以获得超出系统衍射极限分辨率的再现像.     

A forward model and conjugate gradient inversion technique for low-frequency ultrasonic imaging

Emerging methods of hyperthermia cancer treatment require noninvasive temperature monitoring, and ultrasonic techniques show promise in this regard. Various tomographic algorithms are available that reconstruct sound speed or contrast profiles, which can be related to temperature distribution. The requirement of a high enough frequency for adequate spatial resolution and a low enough frequency for adequate tissue penetration is a difficult compromise. In this study, the feasibility of using low frequency ultrasound for imaging and temperature monitoring was investigated. The transient probing wave field had a bandwidth spanning the frequency range 2.5-320.5 kHz. The results from a forward model which computed the propagation and scattering of low-frequency acoustic pressure and velocity wave fields were used to compare three imaging methods formulated within the Born approximation, representing two main types of reconstruction. The first uses Fourier techniques to reconstruct sound-speed profiles from projection or Radon data based on optical ray theory, seen as an asymptotical limit for comparison. The second uses backpropagation and conjugate gradient inversion methods based on acoustical wave theory. The results show that the accuracy in localization was 2.5 mm or better when using low frequencies and the conjugate gradient inversion scheme, which could be used for temperature monitoring.     

Investigation of linear and nonlinear frequency modulated excitation effects on tissue harmonic imaging

The generation of tissue harmonics is due to nonlinear nature of ultrasound wave propagation in biological tissues.The tissue harmonics for imaging i.e.tissue harmonic imaging (THI)uses higher frequency components for imaging in which the resolution improves significantly but signal-to-noise ratio(SNR)and penetration depth remains low as compared to both fundamental and second harmonic imaging.The coded excitations have potential to improve the SNR which ultimately leads to improved penetration depth.In the present work,the linear frequency modulated(chirp/LFM)and nonlinear frequency modulated(NLFM)signals have been used to investigate the nonlinear ultrasound wave propagation and harmonic generation in biological tissues.The SNR has been found to be substantially improved for coded tissue harmonic imaging(CTHI)as well as for coded superharmonic imaging(CSHI).     

Difference-frequency ultrasound generation from microbubbles under dual-frequency excitation

The difference-frequency (DF) ultrasound generated by using parametric effect promises to improve detection depth owing to its low attenuation, which is beneficial for deep tissue imaging. With ultrasound contrast agents infusion, the harmonic components scattered from the microbubbles, including DF, can be generated due to the nonlinear vibration. A theoretical study on the DF generation from microbubbles under the dual-frequency excitation is proposed in formula based on the solution of the RPNNP equation. The optimisation of the DF generation is discussed associated with the applied acoustic pressure, frequency, and the microbubble size. Experiments are performed to validate the theoretical predictions by using a dual-frequency signal to excite microbubbles. Both the numerical and experimental results demonstrate that the optimised DF ultrasound can be achieved as the difference frequency is close to the resonance frequency of the microbubble and improve the contrast-to-tissue ratio in imaging.     

结构光照明超分辨光学显微成像技术与展望

结构光照明显微镜(Structured Illumination Microscopy,SIM)通过结构化照明在频率域以空间混频的方式将物体高频信息载入光学系统的探测通带内实现突破衍射极限的超分辨光学显微成像。SIM凭借其较低的激发光强、对荧光染料的非特异性需求以及快速的宽场成像优势已成为活细胞超分辨光学显微成像方面应用最多的技术。本文系统回顾了SIM的技术进展,对SIM的基本原理与实现方法进了详细的分析,重点介绍了本课题组研发的基于光谱分辨的单光子激发超分辨显微镜和结合自适应光学的双光子激发超分辨显微镜这两种最新的SIM技术,最后简要讨论了SIM技术在生物成像中的应用及未来发展方向。     

A dual-tuned quadrature volume coil with mixed λ/2 and λ/4 microstrip resonators for multinuclear MRSI at 7 T

In this work, an eight-element by eight-element dual-tuned quadrature volume coil with a mix of capacitor terminated half-wavelength (λ/2) and quarter-wavelength (λ/4) microstrip resonators is proposed for multinuclear magnetic resonance imaging/spectroscopy studies at 7 T. In the proton channel, λ/2 microstrip resonators with capacitive terminations on both ends are employed for operation at higher frequency of 298.1 MHz; in the heteronucleus channel, capacitor-terminated λ/4 resonators, suitable for low frequency operations, are used to meet the low frequency requirement. This mixed structure design is particularly advantageous for high field heteronuclei magnetic resonance applications with large difference in Larmor frequency of the nuclei in question. The proposed design method makes it much easier to perform frequency tuning for heteronucleus channel using a variable capacitor with a practical capacitance range. As an example, a dual-tuned volume coil for (1)H/(13)C mouse spectroscopic imaging was proposed to demonstrate the feasibility of this method. The finite-difference time-domain method is first used to model this dual-tuned volume coil and calculate the B(1) field distributions at two frequencies. Transmission parameters (S(21)) measured between the proton channel and the carbon channel are -50 dB at 75 MHz and -35 dB at 298 MHz, showing the excellent isolation between the two channels at 7 T. The proton image and (13)C FIDCSI image of a corn oil phantom on the axial plane at 7 T demonstrate the feasibility of the proposed method. A preliminary proton image of a mouse on the sagittal plane is also acquired using the proposed dual-tuned volume coil at 7 T, illustrating a fairly uniform B(1) field and sufficient image coverage for imaging in mice.     

直接测距型激光主动成像系统发展现状

对直接测距型激光主动成像系统进行了深入研究。按照工作方式分类介绍了国外相关研究机构激光主动成像系统的工作原理及系统参数, 归纳总结并比较分析了各工作方式的优缺点。分析认为:基于单点或小面阵探测器配合光机扫描方案可实现较远作用距离, 但其对激光器重频要求较高, 后续数据处理复杂, 且系统体积、功耗较大;而基于Flash探测器的激光主动成像系统易于实现小型化, 对激光器重频要求较低。作用距离受限问题可通过电子扫描得以有效解决。在具体应用时, 需根据实际需求, 综合考虑系统体积、质量、功耗、激光器输出峰值功率及脉冲重复频率、所能获取的探测器类型、后续数据处理能力等多种因素折衷选取。     

Fundamental study on subharmonic imaging by irradiation of amplitude-modulated ultrasound waves

The second harmonic and subharmonic components, the frequencies of which are twice and one half the fundamental frequency, are included in echoes from contrast agents. An imaging method, which employs a second harmonic (second harmonic imaging), is widely used in medical diagnoses. On the other hand, subharmonic is expected to provide a higher contrast between biological tissues and blood flow because echo signals are generated only from blood containing the contrast agents. However, the subharmonic component echo signal power from contrast agents is relatively low. This has resulted in little progress in the field of subharmonic imaging. In this study, a new imaging method is proposed using amplitude-modulated waves as transmitted waves combined with the pulse inversion method to enhance subharmonic echo signals. Two optimal frequencies are set, including the modulated waves, F(1) and F(2), so that the subharmonic frequency of F(1) and the second harmonic frequency of F(2) may result in the same value. This allows a more powerful signal at the frequency band because the second harmonic and subharmonic components are integrated. Furthermore, a B-mode ultrasound image of an agar phantom that imitated biological tissue and showed the effectiveness of our method was reconstructed. As a result, the echo power of the subharmonic component was enhanced by approximately 11.8 dB more than the conventional method and the signal to noise ratio showed an improvement of 7.6 dB.     

光学移频超分辨成像技术进展

光学显微镜具有无损、样品友好、速度快等优点,一直是人类探索微观世界的主要手段。但是,由于受到衍射极限限制,长期以来,光学成像系统的分辨率最高仅能达到可见光半波长量级,逐渐成为科学技术发展的桎梏。对于荧光标记样品,可以利用荧光超分辨光学显微成像技术打破光学衍射极限,填补电子显微镜(约为1 nm)和普通可见光学显微镜(200~250 nm)之间的空缺。然而,对于大多数样品特别是非荧光标记样品而言,利用现有技术进行超分辨成像依旧存在相当难度。近年来,科研人员从合成孔径成像原理出发,提出了光学移频超分辨成像方法,开辟了光学超分辨成像的新思路。光学移频超分辨成像不拘泥于荧光非线性效应的限制,兼具非荧光标记样品以及荧光标记样品的超分辨成像能力,而且因为其成像速度快、样品普适性高和光毒性低等优点,在材料学、生物学和医学等领域展现了很好的应用前景。本文从原理和方法上详细综述了移频超分辨光学显微成像技术,并对未来发展方向进行了评述和展望。     

Presence of nonlinear interference effects as a source of low frequency excitation force in vibro-acoustography

The vibro-acoustography imaging method consists of forming an image of the deformability of a tissue submitted to a low frequency fLF stress field. This sound field can be created locally by means of a focused annular array emitting two primary beams driven at two close frequencies fa and fb = fa + fLF. In the existing literature, the origin of this stress field has been identified as the low frequency radiation pressure of the two primary beams. However, this work intends to show that another contribution to this internal stress is the low frequency field distributed in the object volume and created by the nonlinear interferences of the two primary beams. This nonlinear field was calculated in the case of multiple ring annular arrays and compared with the qLF beam experimentally measured in a water tank. The agreement between the theoretical and experimental curves provides information on the possibility that this nonlinear effect takes place in vibro-acoustography.     

Subsurface defect of amorphous carbon film imaged by near field acoustic microscopy

Amorphous carbon films were examined by low frequency scanning-probe acoustic microscopy (LF-SPAM). Local elastic properties as well as topography were imaged in the acoustic mode. Two kinds of subsurface defects were revealed by the LF-SPAM method. The influence of the subsurface defects on the elastic properties was also discussed. The ability to image subsurface defects was dependent on the scan area and the scan speed. Our results showed that the low frequency scanning-probe acoustic microscopy is a useful method for imaging subsurface defects with high resolution. PACS 68.37.Ps; 68.37.Uv; 61.43.Dq; 68.35.Gy     

双弹光拍频调制型Fourier-Bessel变换成像光谱技术研究

针对现有弹光调制器(photoelastic-modulator, PEM)的调制频率高(几十kHz以上),调制干涉信号频率更高,普通阵列探测器无法有效采集,提出了一种基于双弹光调制器拍频调制和傅里叶-贝塞尔(Fourier-Bessel)变换的光谱测量方法,并结合CCD成像技术构成新型双弹光调制成像光谱技术(dual-photoelastic-modulator-based imaging spectrometer, Dual-PEM-IS)。该方法将双弹光调制器分别工作在数值略有差异的频率上,以对光进行拍频调制,并产生载有被测光的低频调制分量(比驱动频率小2～3个数量级,普通CCD可实现探测),通过对调制信号中的低频成分进行Fourier-Bessel变换可得到目标光谱,使得弹光调制兼具了成像和光谱测量能力。介绍了其原理并推导出光谱反演公式,并通过仿真和实验验证其可行性,分析了光程差的微小偏差对反演光谱造成的影响,为进一步工程化实现提供了必要的理论基础。     

剪切光束成像技术对纵深目标的成像

剪切光束成像技术是一种能透过大气湍流对远距离目标实现高分辨率成像的主动成像技术.现有相关研究中所采用的目标均为二维平面目标,然而现实中的目标一般都具有三维形貌,目标纵深对回波信号产生的延迟或对成像质量产生不利影响.从剪切光束成像理论出发,在二维目标成像模型的基础上建立了三维纵深目标成像模型,并利用该模型研究了两剪切光与参考光间的频差及目标纵深对成像的影响.仿真结果表明,随着拍频的增大,重构图像质量逐渐下降.剪切光束成像技术可通过减小拍频来提高真实目标成像质量.     

Terahertz sensing and imaging based on nanostructured semiconductors and carbon materials

The advantageous properties of terahertz (THz) waves, such as permeability through objects that are opaque for visible light and the energy spectrum in the microelectron‐volt range that are important in materials research, allow their potential use in various applications of sensing and imaging. However, since the THz region is located between the electronic and photonic bands, even the basic components such as detectors and sources have not been fully developed, unlike in other frequency regions. THz technology also has the problem of low imaging resolution, which results from a considerably longer wavelength than that of the visible light. However, the utilization of nanostructured electronic devices has recently opened up new horizons for THz sensing and imaging. This paper provides an overview of the THz detector and imaging techniques and tracks their recent progress. Specifically, two cutting‐edge techniques, namely, frequency‐selective THz‐photon detection and integrated near‐field THz imaging, are discussed in detail. Finally, the studies of superconductors and semiconductors with high‐resolution THz imaging are described.