功能梯度压电压磁材料中裂纹对SH波的散射

研究无限大功能梯度压电/压磁复合材料中裂纹对SH波的散射问题.为了便于分析,假设材料性质沿着裂纹的法线方向是指数变化.利用Fourier余弦变化,将问题转化为对偶积分方程的求解,此对偶积分方程采用Copson方法求解.然后求得应力强度因子、电位移强度因子、磁通量强度因子的解析表达式,最后数值算例给出了材料参数、入射角及波数对标准动应力强度因子的影响.     

功能梯度压电板条中电绝缘型运动裂纹的电弹性场

基于三维弹性理论和压电理论，对材料系数按指数函数规律分布的功能梯度压电板条中的反平面运动裂纹问题进行了求解。利用Fourier积分变换方法将电绝缘型运动裂纹问题化为对偶积分方程，并进一步归结为易于求解的第二类Fredholm积分方程。通过渐近分析，获得了裂纹尖端应力、应变、电位移和电场的解析解，给出了裂纹尖端场各个变量的角分布函数，并求得了裂纹尖端场的强度因子，分析了压电材料物性梯度参数、几何尺寸及裂纹运动速度对它们的影响。结果表明，对于电绝缘型裂纹，功能梯度压电板条中运动裂纹尖端附近的各个场变量都具有-1／2阶的奇异性；当裂纹运动速度增大时，裂纹扩展的方向会偏离裂纹面。     

功能梯度材料与均质材料交界面上Ⅰ-型裂纹对简谐动载的响应分析

在忽略界面裂尖端裂纹面相互叠入的条件下,对功能梯度材料与均质材料交界面上Ⅰ-型裂纹对简谐动载响应问题进行了分析。利用傅立叶变换,将问题的求解转换为对以裂纹面上位移差为未知函数的对偶积分方程的求解。为了求解对偶积分方程,将裂纹面上的位移差函数展开为雅可毕多项式的级数形式。最终给出了裂纹长度、入射波频率和材料性质对应力强度的影响。结果表明,当界面材料不连续时,获得了具有普通1/2奇异性的近似解。     

功能梯度压电带中裂纹对SH波的散射

研究功能梯度压电带中裂纹对SH波的散射问题,为了便于分析,材料性质假定为指数模型,并假设裂纹面上的边界条件为电渗透型的.根据压电理论得到压电体的状态方程,利用Fourier积分变换,问题转化为对偶积分方程的求解.用Copson方法求解积分方程.求得了裂纹尖端动应力强度因子、电位移强度因子的解析表达式,最后数值结果显示了标准动应力强度因子与入射波数、材料参数、带宽、波数以及入射角之间的关系.     

正交各向异性功能梯度材料反平面裂纹尖端应力场

采用积分变换-对偶积分方程方法,研究了正交各向异性功能梯度材料反平面裂纹问题,文中假定材料沿两个主轴方向的剪切模量成比例按双参数梯度模型变化,通过求解对偶积分程并考虑变形Bessel函数的渐特性,推导出了裂纹尖端应力场,最后考察了材料非均匀性及正交性对应力强度因子的影响。     

非均匀弹性材料中反平面的运动裂纹

用解析方法研究了非均匀弹性材料中反平面运动裂纹问题。首先采用余弦变换求解非均匀材料的基本方程，然后根据混合边值条件建立裂纹运动的对偶积分方程，再把对偶积分方程化为第二类Fredholm积分方程。给出了数值算例，计算结果表明材料的非均匀性对动应力强度因子有较大的影响。     

SH波在正交各向异性功能梯度无限长条中心裂缝处的散射

研究了正交各向异性功能梯度材料无限长条中心裂缝对SH波的散射问题,为方便起见,材料两个方向的剪切模量和密度假定为指数模型.通过Fourier积分变换,将问题转化为对偶积分方程的求解.然后,用Cop-son方法求解对偶积分方程,定义了标准动应力强度因子,通过数值算例,讨论了在SH波作用下,裂缝尖端的标准动应力强度因子与入射波的频率、材料参数之间的关系.     

功能梯度材料涂层平面运动裂纹分析

研究粘结于均匀材料基底上功能梯度材料涂层平面运动裂纹问题,假设功能梯度材料剪切模量和密度为坐标的指数函数,而泊松比为常数.采用Fourier变换和传递矩阵法将该混合边值问题转化为一对奇异积分方程,通过数值求解奇异积分方程组获得功能梯度材料涂层平面运动裂纹的应力强度因子.考察了结构几何尺寸、裂纹运动速度以及材料梯度参数对运动裂纹的应力强度因子的影响,发现材料梯度参数、结构几何尺寸、裂纹长度以及运动速度均对功能梯度材料动态断裂行为有显著影响.     

SH波在压电材料条中垂直界面裂纹处的散射

研究了SH波在压电材料条中裂纹处的散射.压电材料条两侧涂有相同梯度参数的两个半无限大功能梯度材料,裂纹垂直于界面.通过Fourier变换,利用边界条件把问题转化为柯西核奇异积分方程,然后利用Chebyshev多项式对奇异积分方程进行数值求解.通过数值计算,分析讨论了压电条的几何参数和SH波频率对标准动应力强度因子的影响.     

梯度材料中矩形裂纹的对偶边界元方法分析

采用对偶边界元方法分析了梯度材料中的矩形裂纹. 该方法基于层状材料基本解,以非裂纹边界的位移和面力以及裂纹面的间断位移作为未知量. 位移边界积分方程的源点配置在非裂纹边界上,面力边界积分方程的源点配置在裂纹面上. 发展了边界积分方程中不同类型奇异积分的数值方法. 借助层状材料基本解,采用分层方法逼近梯度材料夹层沿厚度方向力学参数的变化. 与均匀介质中矩形裂纹的数值解对比,建议方法可以获得高精度的计算结果. 最后,分析了梯度材料中均匀张应力作用下矩形裂纹的应力强度因子,讨论了梯度材料非均匀参数、夹层厚度和裂纹与夹层之间相对位置对应力强度因子的影响.      

The 7th International Conference on Fluid Mechanics May 24-27,2015,Qingdao,China

正http://www.icfm7.org First Announcement and Call for PapersThe objective of International Conference on Fluid Mechanics(ICFM)is to provide a forum for researchers to exchange new ideas and recent advances in the fields of theoretical,experimental,computational Fluid Mechanics as well as interdisciplinary subjects.It was successfully convened by the Chinese Society of Theoretical and Applied Mechanics(CSTAM)in Beijing(1987,     

INFORMATION FOR CONTRIBUTORS

Contributions： The Journal, Acta Mechanica Solida Sinica, is pleased to receive papers from engineers and scientists working in various aspects of solid mechanics. All contributions are subject to critical review prior to acceptance and publication.     

基于鲁棒滤波的捷联导引头视线角速度估计方法

针对捷联导引头无法直接获取视线角速度等信息的问题,研究了鲁棒滤波在大气层外飞行器捷联导引头视线角速度估计中的应用。为了建立非线性滤波估计模型,考虑目标视线角速度的慢变特性,采用一阶马尔科夫模型建立了状态方程;推导了视线角速度的解耦模型,并建立了量测方程;考虑到实际应用中存在系统噪声统计特性失准的问题,基于Huber-Based鲁棒滤波方法,设计了视线角速度滤波器,并完成了基于Huber-Based滤波方法和扩展卡尔曼滤波方法的数学仿真。仿真结果表明Huber-Based滤波方法的视线角、视线角速度及视线角加速度估计精度分别达到0.1140'、0.1423'/s、0.0203'/s2,而扩展卡尔曼滤波方法的视线角、视线角速度及视线角加速度估计精度仅分别为0.6577'、0.6415'/s、0.0979'/s~2。仿真结果证明了该方法可以有效地估计出相对视线角速度等信息,并且在非高斯噪声的条件下,依然可获得较高的估计精度,具有一定的鲁棒性。     

Guide for authors

正Each of the sections below provides essential information for authors.We recommend that you take the time to read them before submitting a contribution to Acta Mechanica Sinica.We hope our guide to authors may help you navigate to the appropriate section.How to prepare a submission This document provides an outline of the editorial process involved in publishing a scientific paper in Acta Mechanica     

Use specification of multiscale materials for life spanned over macro-, micro-, nano-, and pico-scale

Multiscale material intends to enhance the strength and life of mechanical systems by matching the transmitted spatiotemporal energy distribution to the constituents at the different scale, say—macro, micro, nano, and pico,—, depending on the needs. Lower scale entities are, particularly, critical to small size systems. Large structures are less sensitive to microscopic effects. Scale shifting laws will be developed for relating test data from nano-, micro-, and macro-specimens. The benefit of reinforcement at the lower scale constituents needs to be justified at the macroscopic scale. Filling the void and space in regions of high energy density is considered.Material inhomogeneity interacts with specimen size. Their combined effect is non-equilibrium. Energy exchange between the environment and specimen becomes increasingly more significant as the specimen size is reduced. Perturbation of the operational conditions can further aggravate the situation. Scale transitional functions and/or f_j/j+1 are introduced to quantify these characteristics. They are represented, respectively, by , and (f_mi/ma,f_na/mi,f_pi/na). The abbreviations pi, na, mi, and ma refer to pico, nano, micro and macro.Local damage is assumed to initiate at a small scale, grows to a larger scale, and terminate at an even larger scale. The mechanism of energy absorption and dissipation will be introduced to develop a consistent book keeping system. Compaction of mass density for constituents of size 10⁻¹², 10⁻⁹, 10⁻⁶, 10⁻³ m, will be considered. Energy dissipation at all scales must be accounted for. Dissipations at the smaller scale must not only be included but they must abide by the same physical and mathematical interpretation, in order to avoid inconsistencies when making connections with those at the larger scale where dissipations are eminent.Three fundamental Problems I, II, and III are stated. They correspond to the commonly used service conditions. Reference is made to a Representative Tip (RT), the location where energy absorption and dissipation takes place. The RT can be a crack tip or a particle. At the larger size scales, RT can refer to a region. Scale shifting of results from the very small to the very large is needed to identify the benefit of using multiscale materials.     

Impact non-pénétrant sur le thorax : influence de la courbure sur la propagation des ondesNonpenetrating impact on the thorax: influence of curvature on wave propagation

Theoretical studies of the propagation of impact waves through the thorax are needed to improve the design of bulletproof jackets and blast protections (Fung in ‘Biomechanics Motions, Flow, Stress, and Growth’, Springer-Verlag, 1990; Cooper et al., J. Trauma 40 (1996) S38–S41). The influence of the weak acoustic coupling at the interface between the thoracic wall and the lung were described in (Grimal et al., C. R. Acad. Sci. IIB 329 (2001) 655–662); in this work, we study, within the frame of elastodynamics and with an approximate analytical method, the effects of the curvature of this interface. Results are given in terms of strain energy for the pressure wave, transmitted or converted. Focalisation of energy in the medium representing the lung is important for curvatures measured in humans. To cite this article: Q. Grimal et al., C. R. Mecanique 330 (2002) 569–574.     

Vérification expérimentale de la relation de réciprocité d'Onsager pour l'électro-osmose et l'électro-filtration dans une argile naturelleExperimental verification of the Onsager's reciprocal relations for electro-osmosis and electro-filtration phenomena on a saturated clay

This Note is devoted to the experimental verification of the Onsager's reciprocal relations in the particular case of electro-osmosis and electro-filtration. A special set up has been designed to carry out the measurements of both the electro-osmotic permeability and the streaming potential. This has been performed by using a natural material i.e., saturated kaolinite. To cite this article: K. Beddiar et al., C. R. Mecanique 330 (2002) 893–898.