Chiral Manganese Aminopyridine Complexes: the Versatile Catalysts of Chemo‐ and Stereoselective Oxidations with H2O2

In the last decade, manganese(II) complexes with N‐donor tetradentate aminopyridine ligands emerged as efficient catalysts of enantioselective epoxidation of olefins and direct selective oxidation of C−H groups in complex organic molecules, with environmentally benign oxidant hydrogen peroxide. In this personal account, we summarize the progress of these catalysts with regard to ligands design, structure‐reactivity correlations, evaluation of the substrate scope, as well as mechanistic studies, shedding light on the nature of active sites and the mechanisms of selective oxygenations. Several practically promising catalytic syntheses with the aid of Mn aminopyridine catalysts are exemplified.     

MTO and OsO4: an efficient catalytic couple for mild H2O2-based asymmetric dihydroxylation of olefins

A novel and robust system for osmium-catalyzed asymmetric dihydroxylation of olefins by aqueous H2O2 with methyltrioxorhenium (MTO) as electron transfer mediator (ETM) has been developed. The MTO is catalyzing the H2O2 oxidation of the chiral ligand to its mono-N-oxide, which in turn reoxidizes OsVI to OsVIII. Thus the (DHQD)2PHAL plays a dual role serving as the chiral inductor as well as the tertiary amine generating the N-oxide required for the recycling of osmium. The present catalytic system gives vicinal diols in good isolated yields and high enantiomeric excess (up to 99 % ee).     

Ruthenium-catalyzed asymmetric epoxidation of olefins using H2O2, part II: catalytic activities and mechanism

Asymmetric epoxidation of olefins with 30 % H2O2 in the presence of [Ru(pybox)(pydic)] 1 and [Ru(pyboxazine)(pydic)] 2 has been studied in detail (pybox = pyridine-2,6-bisoxazoline, pyboxazine = pyridine-2,6-bisoxazine, pydic = 2,6-pyridinedicarboxylate). 35 Ruthenium complexes with sterically and electronically different substituents have been tested in environmentally benign epoxidation reactions. Mono-, 1,1-di-, cis- and trans-1,2-di-, tri-, and tetra-substituted aromatic olefins with versatile functional groups can be epoxidized with this type of catalyst in good to excellent yields (up to 100 %) with moderate to good enantioselectivies (up to 84 % ee). Additive and solvent effects as well as the relative rate of reaction with different catalysts have been established. It is shown that the presence of weak organic acids or an electron-withdrawing group on the catalyst increases the reactivity. New insights on the reaction intermediates and reaction pathway of the ruthenium-catalyzed epoxidation are proposed on the basis of density functional theory calculation and experiments.     

Highly Enantioselective Epoxidation of cis‐Alkenylsilanes

A general and highly enantioselective method for the epoxidation of cis‐alkenylsilanes, in which the epoxysilanes were obtained with complete enantioselectivity in the presence of 0.5–2 mol % of a Ti–Salalen complex. The combination of this epoxidation method and the following transformations is a powerful approach that provides synthetically important epoxides, such as styrene oxides and geminally disubstituted epoxides, in enantiopure form.

     

Asymmetric Allylation of Ketones and Subsequent Tandem Reactions Catalyzed by a Novel Polymer‐Supported Titanium–BINOLate Complex

By using a novel, simple, and convenient synthetic route, enantiopure 6‐ethynyl‐BINOL (BINOL=1,1‐binaphthol) was synthesized and anchored to an azidomethylpolystyrene resin through a copper‐catalyzed alkyne–azide cycloaddition (CuAAC) reaction. The polystyrene (PS)‐supported BINOL ligand was converted into its diisopropoxytitanium derivative in situ and used as a heterogeneous catalyst in the asymmetric allylation of ketones. The catalyst showed good activity and excellent enantioselectivity, typically matching the results obtained in the corresponding homogeneous reaction. The allylation reaction mixture could be submitted to epoxidation by simple treatment with tert‐butyl hydroperoxide (TBHP), and the tandem asymmetric allylation epoxidation process led to a highly enantioenriched epoxy alcohol with two adjacent quaternary centers as a single diastereomer. A tandem asymmetric allylation/Pauson–Khand reaction was also performed, involving simple treatment of the allylation reaction mixture with Co₂(CO)₈/N‐methyl morpholine N‐oxide. This cascade process resulted in the formation of two diastereomeric tricyclic enones in high yields and enantioselectivities.     

Iron‐Promoted ortho‐ and/or ipso‐Hydroxylation of Benzoic Acids with H2O2

Regioselective hydroxylation of aromatic acids with hydrogen peroxide proceeds readily in the presence of iron(II) complexes with tetradentate aminopyridine ligands [Fe^II(BPMEN)(CH₃CN)₂](ClO₄)₂ ( 1 ) and [Fe^II(TPA)(CH₃CN)₂](OTf)₂ ( 2 ), where BPMEN=N,N′‐dimethyl‐N,N′‐bis(2‐pyridylmethyl)‐1,2‐ethylenediamine, TPA=tris‐(2‐pyridylmethyl)amine. Two cis‐sites, which are occupied by labile acetonitrile molecules in 1 and 2 , are available for coordination of H₂O₂ and substituted benzoic acids. The hydroxylation of the aromatic ring occurs exclusively in the vicinity of the anchoring carboxylate functional group: ortho‐hydroxylation affords salicylates, whereas ipso‐hydroxylation with concomitant decarboxylation yields phenolates. The outcome of the substituent‐directed hydroxylation depends on the electronic properties and the position of substituents in the molecules of substrates: 3‐substituted benzoic acids are preferentially ortho‐hydroxylated, whereas 2‐ and, to a lesser extent, 4‐substituted substrates tend to undergo ipso‐hydroxylation/decarboxylation. These two pathways are not mutually exclusive and likely proceed via a common intermediate. Electron‐withdrawing substituents on the aromatic ring of the carboxylic acids disfavor hydroxylation, indicating an electrophilic nature for the active oxidant. Complexes 1 and 2 exhibit similar reactivity patterns, but 1 generates a more powerful oxidant than 2 . Spectroscopic and labeling studies exclude acylperoxoiron(III) and Fe^IV?O species as potential reaction intermediates, but strongly indicate the involvement of an Fe^III? OOH intermediate that undergoes intramolecular acid‐promoted heterolytic O? O bond cleavage, producing a transient iron(V) oxidant.     

Asymmetric Hydroalkoxylation of Non‐Activated Alkenes: Titanium‐Catalyzed Cycloisomerization of Allylphenols at High Temperatures

The asymmetric catalytic addition of alcohols (phenols) to non‐activated alkenes has been realized through the cycloisomerization of 2‐allylphenols to 2‐methyl‐2,3‐dihydrobenzofurans (2‐methylcoumarans). The reaction was catalyzed by a chiral titanium–carboxylate complex at uncommonly high temperatures for asymmetric catalytic reactions. The catalyst was generated by mixing titanium isopropoxide, the chiral ligand (aS)‐1‐(2‐methoxy‐1‐naphthyl)‐2‐naphthoic acid or its derivatives, and a co‐catalytic amount of water in a ratio of 1:1:1 (5 mol % each). This homogeneous thermal catalysis (HOT‐CAT) gave various (S)‐2‐methylcoumarans with yields of up to 90 % and in up to 85 % ee at 240 °C, and in 87 % ee at 220 °C.     

Olefin epoxidation with hydrogen peroxide catalyzed by lacunary polyoxometalate [gamma-SiW10O34H2O2]4-

The tetra-n-butylammonium (TBA) salt of the divacant Keggin-type polyoxometalate [TBA](4)[gamma-SiW(10)O(34)(H(2)O)(2)] (I) catalyzes the oxygen-transfer reactions of olefins, allylic alcohols, and sulfides with 30 % aqueous hydrogen peroxide. The negative Hammett rho(+) (-0.99) for the competitive oxidation of p-substituted styrenes and the low value of (nucleophilic oxidation)/(total oxidation), X(SO)=0.04, for I-catalyzed oxidation of thianthrene 5-oxide (SSO) reveals that a strongly electrophilic oxidant species is formed on I. The preferential formation of trans-epoxide during epoxidation of 3-methyl-1-cyclohexene demonstrates the steric constraints of the active site of I. The I-catalyzed epoxidation proceeds with an induction period that disappears upon treatment of I with hydrogen peroxide. (29)Si and (183)W NMR spectroscopy and CSI mass spectrometry show that reaction of I with excess hydrogen peroxide leads to fast formation of a diperoxo species, [TBA](4)[gamma-SiW(10)O(32)(O(2))(2)] (II), with retention of a gamma-Keggin type structure. Whereas the isolated compound II is inactive for stoichiometric epoxidation of cyclooctene, epoxidation with II does proceed in the presence of hydrogen peroxide. The reaction of II with hydrogen peroxide would form a reactive species (III), and this step corresponds to the induction period observed in the catalytic epoxidation. The steric and electronic characters of III are the same as those for the catalytic epoxidation by I. Kinetic, spectroscopic, and mechanistic investigations show that the present epoxidation proceeds via III.     

Synthesis of 2′‐Deoxy‐1′‐homo‐N‐nucleosides with Anti‐Influenza Activity by Catalytic Methyltrioxorhenium (MTO)/H2O2 Oxyfunctionalization

This paper describes a new route for the synthesis of 1′‐homo‐N‐nucleoside derivatives by means of either methyltrioxorhenium (MTO) or supported MTO catalysts, with H₂O₂ as the primary oxidant. Under these selective conditions, the oxyfunctionalization of the heterocyclic ring and the N heteroatom oxidation were operative processes, regardless of the type of substrate used, that is, purine or pyrimidine derivatives. In addition, the oxidation of 1′‐homo‐N‐thionucleosides, showed the occurrence of site‐specific oxidative nucleophilic substitutions of the heterocyclic ring. The MTO/H₂O₂ system showed, in general, high reactivity under both homogeneous and heterogeneous conditions, affording the final products with high conversion values of substrates and from medium to high yields. Many of the novel 1′‐homo‐N‐nucleoside analogues were active against the influenza A virus, without any cytotoxic effects, retaining their activity in both protected and unprotected forms.     

Oxidation by a H2O2-vanadium complex-2-pyrazinecarboxylic acid reagent

Evidence for the formation of hydroxyl radicals and their participation in hydrocarbon oxidation by a H₂O₂-vanadium complex-2-pyrazinecarboxylic acid reagent has been obtained by the spin trap method and kinetically, by competitive oxidation of a benzenealiphatic alcohol mixture.For part 2, see Ref. l.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1212–1214, July, 1994.This work was financially supported by the Russian Foundation for Basic Research (project No. 93-03-5226) and the International Science Foundation (Grant No. MMS000). The authors are grateful to D. Attanasio and L. Suber (Italy) for help in the work and to S. N. Dobryakov and Yu. N. Kozlov for their participation in the discussions.     

Asymmetric oxidation of sulfides with H2O2 catalyzed by titanium complexes of Schiff bases bearing a dicumenyl salicylidenyl unit

The sterically hindered Schiff bases (L³–L⁵), prepared from 3,5‐dicumenyl salicylaldehyde and chiral amino alcohols, were used in combination with Ti(OiPr)₄ for asymmetric oxidation of aryl methyl sulfides with H₂O₂ as terminal oxidant. Among the ligands L³–L⁵, L⁴ with a tert‐butyl group in the chiral carbon of the amino alcohol moiety gave the best result with 89% yield and 73% ee for the sulfoxidation of thioanisole under optimal conditions [with 1 mol% of Ti(OiPr)₄ in a molar ratio of 100:1:1.2:120 for sulfide:Ti(OiPr)₄:ligand:H₂O₂ in CH₂Cl₂ at 0 °C for 3 h]. The reaction afforded good yield (84%) with a moderate enantioselectivity (62% ee) even with a lower catalyst loading from 1.0 to 0.5 mol%. The oxidations of methyl 4‐bromophenyl sulfide and methyl 4‐methoxyphenyl sulfide with H₂O₂ catalyzed by the Ti(OiPr)₄–L⁴ system gave 79–84% yields and 54–59% ee of the corresponding sulfoxides in CH₂Cl₂ at 20 °C. The chiral induction capability of the cumenyl‐modified sterically hindered Schiff bases for sulfoxidation was compared with the conventional Schiff bases bearing tert‐butyl groups at the 3,5‐positions of the salicylidenyl unit. Copyright © 2011 John Wiley & Sons, Ltd.     

gamma-1,2-H2SiV2W10O40] immobilized on surface-modified SiO2 as a heterogeneous catalyst for liquid-phase oxidation with H2O2

An organic-inorganic hybrid support has been synthesized by covalently anchoring an N-octyldihydroimidazolium cation fragment onto SiO2 (denoted as 1-SiO2). This modified support was characterized by solid-state 13C, 29Si, and 31P NMR spectroscopy, IR spectroscopy, and elemental analysis. The results showed that the structure of the dihydroimidazolium skeleton is preserved on the surface of SiO2. The modified support can act as a good anion exchanger, which allows the catalytically active polyoxometalate anion [gamma-1,2-H2SiV2W10O40]4- (I) to be immobilized onto the support by a stoichiometric anion exchange (denoted as I/1-SiO2). The structure of anion I is preserved after the anion exchange, as confirmed by IR and 51V NMR spectroscopy. The catalytic performance for the oxidation of olefins and sulfides, with hydrogen peroxide (only one equivalent with respect to substrate) as the sole oxidant, was investigated with I/1-SiO2. This supported catalyst shows a high stereospecificity, diastereoselectivity, regioselectivity, and a high efficiency of hydrogen peroxide utilization for the oxidation of various olefins and sulfides without any loss of the intrinsic catalytic nature of the corresponding homogeneous analogue of I (i.e., the tetra-n-butylammonium salt of I, TBA-I), although the rates decreased to about half that with TBA-I. The oxidation can be stopped immediately by removal of the solid catalyst, and vanadium and tungsten species can hardly be found in the filtrate after removal of the catalyst. These results rule out any contribution to the observed catalysis from vanadium and tungsten species that leach into the reaction solution, which means that the observed catalysis is truly heterogeneous in nature. In addition, the catalyst is reusable for both epoxidation and sulfoxidation without any loss of catalytic performance.