(–)‐epi‐Inosose‐2

The structure of the title compound, C₆H₁₀O₆, was determined to confirm the position of the keto group in the mol­ecule prepared enantioselectively by a bioconversion from myo‐inositol. There are two independent mol­ecules showing similar geometry.     

Barium(II)–2,4‐dinitrophenolate–18‐crown‐6 at 183 K

The title compound, bis(2,4‐dinitrophenolato‐κ²O,O′)(1,4,7,10,13,16‐hexaoxadecane‐κ⁶O)barium(II), [Ba(C₆H₃N₂O₅)₂(C₁₂H₂₄O₆)], is a 1:1 complex of barium(II)–2,4‐di­nitro­phenolate and 1,4,7,10,13,16‐hexaoxa­cyclo­octa­decane (18‐crown‐6). Its structure is located on a crystallographic inversion centre. The temperature dependence of the crystal structure has been studied. The monoclinic β angle of the P2₁/­n space group increases with increasing temperature. The packing structure of the complex is stabilized by intermolecular C—H?O interactions.     

1,2‐Diaza‐3‐silacyclopent‐5‐ene – Synthese und Reaktionen

1,2‐Diaza‐3‐silacyclopent‐5‐ene – Synthesis and Reactions The dilithium salt of bis(tert‐butyl‐trimethylsilylmethylen)ketazine ( 1 ) forms an imine‐enamine salt. 1 reacts with halosilanes in a molar ratio of 1:1 to give 1,2‐diaza‐3‐silacyclopent‐5‐enes. Me₃SiCH=CCMe₃ [N(SiR,R′)‐N=C‐C]HSiMe₃ ( 2 ‐ 7 ). ( 2 : R,R′ = Cl; 3 : R = CH₃, R′ = Ph; 4 : R = F, R′ = CMe₃; 5 : R = F, R′ = Ph; 6 : R = F, R′ = N(SiMe₃)₂; 7 : R = F, R′ = N(CMe₃)SiMe₃). In the reaction of 1 with tetrafluorosilane the spirocyclus 8 is isolated. The five‐membered ring compounds 2 ‐ 7 and compound 9 substituted on the silicon‐fluoro‐ and (tert‐butyltrimethylsilyl) are acid at the C(4)‐atom and therefore can be lithiated. Experiments to prepare lithium salts of 4 with MeLi, n‐BuLi and PhLi gave LiF and the substitution‐products 10 ‐ 12 . 9 forms a lithium salt which reacts with ClSiMe₃ to give LiCl and the SiMe₃ ring system ( 13 ) substituted at the C(4)‐atom. The ring compounds 3 ‐ 7 and 10 ‐ 12 form isomers, the formation is discussed. Results of the crystal structure and analyses of 8 , 10 , 12 , and 13 are presented.     

2,2‐Difluor‐1,3‐diaza‐2‐sila‐cyclopenten – Synthese und Reaktionen

2,2‐Difluor‐1,3‐diaza‐2‐sila‐cyclopentene – Synthesis and Reactions N,N′‐Di‐tert‐butyl‐1,4‐diaza‐1,3‐butadiene reacts with elemental lithium under reduction to give a dilithium salt, which forms with fluorosilanes the diazasilacyclopentenes 1 – 4 ; (HCNCMe₃)₂SiFR, R = F ( 1 ), Me ( 2 ), Me₃C ( 3 ), N(CMe₃)SiMe₃ ( 4 ). As by‐product in the synthesis of 1 , the tert‐butyl‐amino‐methylene‐tert‐butyliminomethine substituted compound 5 was isolated, R = N(CMe₃)‐CH₂‐CH = NCMe₃. 5 is formed in the reaction of 1 with the monolithium salt of the 1,4‐diaza‐1,3‐butadiene in an enamine‐imine‐tautomerism. 1 reacts with lithium amides to give (HCNCMe₃)₂SiFNHR, 6 – 12 , R = H ( 6 ), Me ( 7 ), Me₂CH ( 8 ), Me₃C ( 9 ), H₅C₆ ( 10 ), 2,6‐Me₂C₆H₃ ( 11 ), 2,6‐(Me₂CH)₂C₆H₃ ( 12 ). The reaction of 12 with LiNH‐2.6‐(Me₂CH)₂C₆H₃ leads to the formation of (HCNCMe₃)₂Si(NHR)₂, ( 13 ). In the presence of n‐BuLi, 12 forms a lithium salt which looses LiF in boiling toluene. Lithiated 12 adds this LiF and generates a spirocyclic tetramer with a central eight‐membered LiF‐ring ( 14 ), [(HCNCMe₃)₂Si(FLiFLiNR)]₄, R = 2,6‐(Me₂CH)₂C₆H₃. ClSiMe₃ reacts with lithiated 12 to yield the substitution product (HCNCMe₃)₂SiFN(SiMe₃) R, ( 15 ). The crystal structures of 1 , 5 , 6 , 9 , 11 , 13 , 14 are reported.     

Synthesis and characterization of new electroluminescent materials of 1,3,4‐oxadiazole–1,2,3‐triazole hybrids and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine derivatives

New electroluminescent materials of 1,3,4‐oxadiazole–1,2,3‐triazole and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine hybrid derivatives were synthesized and characterized. Following spectroscopic studies and characterization of their electronic properties, 1,3,4‐oxadiazole–1,2,3‐triazole hybrids and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine derivatives were found to be potentially efficient blue electroluminescent materials. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:322–328, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20210     

The hydrogen‐bonded adduct 7,16‐diazonia‐18‐crown‐6–4‐aminobenzenesulfonate–water (1/2/2)

In the title hydrated adduct, 1,4,10,13‐tetraoxa‐7,16‐diazo­nia­cyclo­octa­decane bis(4‐amino­benzene­sulfonate) dihydrate, C₁₂H₂₈N₂O₄²⁺·2C₆H₆NO₃S⁻·2H₂O, formed between 7,16‐di­aza‐18‐crown‐6 and the dihydrate of 4‐amino­benzene­sulfonic acid, the macrocyclic cations lie across centres of inversion in the orthorhombic space group Pbca. The anions alone form zigzag chains, and the cations and anions together form sheets that are linked via water mol­ecules and anions to form a three‐dimensional grid.     

Planarity of benzoylhydrazine–dithiocarbazoate tuberculostatics. I. N′‐Methyl‐substituted 3,4‐dichlorobenzoyl monoesters

Methyl 2‐(3,4‐dichlorobenzoyl)‐1‐methylhydrazinecarbodithioate, C₁₀H₁₀Cl₂N₂OS₂, (F1), butyl 2‐(3,4‐dichlorobenzoyl)‐1‐methylhydrazinecarbodithioate, C₁₃H₁₆Cl₂N₂OS₂, (F2), and 3,4‐dichloro‐N‐(2‐sulfanylidene‐1,3‐thiazinan‐3‐yl)benzamide, C₁₁H₁₀Cl₂N₂OS₂, (F3), were studied by X‐ray diffraction to test our hypothesis that planarity of aryloylhydrazinedithiocarbazic acid esters is a prerequisite for tuberculostatic activity. All compounds examined in this study are inactive and nonplanar due to twists along two specific bonds in the central frame of the molecules. The significant twist at the N—N bond, with an C—N—N—C(S) torsion angle of about 85°, results from repulsion caused by a methyl substituent at the N′ atom of the hydrazide group. The other twist is that within the benzoyl group at the C(O)—Ph bond, i.e. the N—C(=O)—C(phenyl)—C torsion angle: the values found in the studied structures (25–30°) are in agreement with those observed in other compounds containing a similar fragment. As some nonplanar benzoyl derivatives are active, it seems that planarity of the hydrazinedithioate fragment is more important for tuberculostatic activity than planarity of the aryloyl group.     

LC–ESI‐MS/MS analysis for the quantification of morphine,codeine, morphine‐3‐β‐D‐glucuronide,morphine‐6‐β‐D‐glucuronide,and codeine‐6‐β‐D‐glucuronide in human urine J. Mass Spectrom. 2005; 40: 1412–1416

The original article to which this Erratum refers was published in Journal of Mass Spectrometry 40, 2005, 1412–1416. Copyright © 2006 John Wiley & Sons, Ltd     

5‐n‐Butylpyridine‐2‐carboxylate–copper(II) and –iron(III) complexes

In trans‐bis(5‐n‐butyl­pyridine‐2‐carboxyl­ato‐κ²N,O)­bis­(methanol‐κO)copper(II), [Cu(C₁₀H₁₂NO₂)₂(CH₄O)₂], the Cu atom lies on a centre of symmetry and has a distorted octahedral coordination. The Cu—O(methanol) bond length in the axial direction is 2.596 (3) Å, which is much longer than the Cu—­O(carboxylate) and Cu—N distances in the equatorial plane [1.952 (2) and 1.977 (2) Å, respectively]. In mer‐tris(5‐n‐bu­tyl­pyridine‐2‐carboxyl­ato‐κ²N,O)­iron(III), [Fe(C₁₀H₁₂NO₂)₃], the Fe atom also has a distorted octahedral geometry, with Fe—O and Fe—N bond‐length ranges of 1.949 (4)–1.970 (4) and 2.116 (5)–2.161 (5) Å, respectively. Both crystals are stabilized by stacking interactions of the 5‐n‐butyl­pyridine‐2‐carboxyl­ate ligand, although hydrogen bonds also contribute to the stabilization of the copper(II) complex.     

1,5‐Diamino‐4‐methyltetrazolium 5‐Nitrotetrazolate – Synthesis,Testing and Scale‐up

1,5‐Diamino‐4‐methyltetrazolium 5‐nitrotetrazolate ( 2b ) was synthesized in high yield from 1,5‐diamino‐4‐methyltetrazolium iodide ( 2a ) and highly sensitive silver 5‐nitrotetrazolate (AgNT). A safer synthesis, suitable for scale‐up, is introduced involving reaction of the previously unreported 1‐amino‐5‐imino‐4‐methyltetrazole free base ( 2 ) with ammonium 5‐nitrotetrazolate. Both new compounds ( 2 and 2b ) were fully characterized using vibrational (IR and Raman) and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁴N, ¹⁵N), elemental analysis and single crystal X‐ray diffraction. The hydrogen‐bonding networks of both materials are described in terms of their graph‐sets. Compound 2b is hydrolytically stable with a high melting point and concomitant decomposition at 160 °C. The sensitivity of the energetic salt 2b towards impact (>30 J) and friction (>360 N) was tested. The constant volume energy of combustion (Δ_cU) of 2b was measured experimentally using bomb calorimetry. In addition, the detonation parameters (detonation pressure and velocity) of the nitrotetrazolate salt were calculated from the energy of formation, the crystal density and the molecular formula using the EXPLO5 computer code (P = 15.5·GPa, D = 6749 m s^?1) and are similar to that of TNT and nitroguanidine making 2b of prospective interest in propellant charge formulations or, in combination with a suitable oxidizer, as a solid propellant.     

(–)‐Dimenthyl malonate

The title compound, bis(2‐iso­propyl‐5‐methyl­cyclo­hex‐1‐yl) malonate, C₂₃H₄₀O₄, crystallizes in the monoclinic space group P2₁. In the crystal, the mol­ecule is not C₂ symmetric.     

An Optimised Small‐Molecule Stabiliser of the 14‐3‐3–PMA2 Protein–Protein Interaction

Modulation of protein–protein interactions (PPIs) is a highly demanding, but also a very promising approach in chemical biology and targeted drug discovery. In contrast to inhibiting PPIs with small, chemically tractable molecules, stabilisation of these interactions can only be achieved with complex natural products, like rapamycin, FK506, taxol, forskolin, brefeldin and fusicoccin. Fusicoccin stabilises the activatory complex of the plant H⁺‐ATPase PMA2 and 14‐3‐3 proteins. Recently, we have shown that the stabilising effect of fusicoccin could be mimicked by a trisubstituted pyrrolinone (pyrrolidone1, 1 ). Here, we report the synthesis, functional activity and crystal structure of derivatives of 1 that stabilise the 14‐3‐3–PMA2 complex. With a limited compound collection three modifications that are important for activity enhancement could be determined: 1) conversion of the pyrrolinone scaffold into a pyrazole, 2) introduction of a tetrazole moiety to the phenyl ring that contacts PMA2, and 3) addition of a bromine to the phenyl ring that exclusively contacts the 14‐3‐3 protein. The crystal structure of a pyrazole derivative of 1 in complex with 14‐3‐3 and PMA2 revealed that the more rigid core of this molecule positions the stabiliser deeper into the rim of the interface, enlarging especially the contact surface to PMA2. Combination of the aforementioned features gave rise to a molecule ( 37 ) that displays a threefold increase in stabilising the 14‐3‐3–PMA2 complex over 1 . Compound 37 and the other active derivatives show no effect on two other important 14‐3‐3 protein–protein interactions, that is, with CRaf and p53. This is the first study that describes the successful optimisation of a PPI stabiliser identified by screening.     

Strain‐Promoted 1,3‐Dithiolium‐4‐olates–Alkyne Cycloaddition

Reported here is the reactivity of mesoionic 1,3‐dithiolium‐4‐olates towards strained alkynes, leading to thiophene cycloaddition products. In the process, the potential of these dipoles towards orthogonal reaction with azides, allowing efficient double ligation reactions, was discovered. A versatile process to access benzo[c]thiophenes, in an unprecedented divergent fashion, was developed and provides a new entry to unconventional polyaromatic thiophenes.     

Protecting‐group‐free palladium‐catalyzed hydroxylation,C–O and C–N coupling of chiral 6‐bromo‐ and 6,6’‐dibromo‐ 1,1’‐binaphthols

A straightforward, protecting‐group‐free protocol for the synthesis of chiral 6‐substituted and 6,6’‐disubstituted binols (binol = 1,1’‐bi‐2‐naphthol) by palladium‐catalyzed hydroxylation, C–N and C–O coupling of chiral 6‐bromo‐ and 6,6’ ‐dibromo‐1,1’‐binaphthols is developed. The protecting group free palladium‐catalyzed hydroxylation, C–O and C–N cross‐coupling protocol affords a straightforward and general method for the synthesis of chiral 6‐substituted and 6,6’‐disubstituted binols with good yields, avoiding the tedious procedures of introduction and removal of protecting groups. Copyright © 2013 John Wiley & Sons, Ltd.