Nickel(I) Monomers and Dimers with Cyclopentadienyl and Indenyl Ligands

The reaction of (μ‐Cl)₂Ni₂(NHC)₂ (NHC=1,3‐bis(2,6‐diisopropylphenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ylidene (IPr) or 1,3‐bis(2,6‐diisopropylphenyl)imidazolidin‐2‐ylidene (SIPr)) with either one equivalent of sodium cyclopentadienyl (NaCp) or lithium indenyl (LiInd) results in the formation of diamagnetic NHC supported Ni^I dimers of the form (μ‐Cp)(μ‐Cl)Ni₂(NHC)₂ (NHC=IPr ( 1 a ) or SIPr ( 1 b ); Cp=C₅H₅) or (μ‐Ind)(μ‐Cl)Ni₂(NHC)₂ (NHC=IPr ( 2 a ) or SIPr ( 2 b ); Ind=C₇H₉), which contain bridging Cp and indenyl ligands. The corresponding reaction between two equivalents of NaCp or LiInd and (μ‐Cl)₂Ni₂(NHC)₂ (NHC=IPr or SIPr) generates unusual 17 valence electron Ni^I monomers of the form (η⁵‐Cp)Ni(NHC) (NHC=IPr ( 3 a ) or SIPr ( 3 b )) or (η⁵‐Ind)Ni(NHC) (NHC=IPr ( 4 a ) or SIPr ( 4 b )), which have nonlinear geometries. A combination of DFT calculations and NBO analysis suggests that the Ni^I monomers are more strongly stabilized by the Cp ligand than by the indenyl ligand, which is consistent with experimental results. These calculations also show that the monomers have a lone unpaired‐single‐electron in their valence shell, which is the reason for the nonlinear structures. At room temperature the Cp bridged dimer (μ‐Cp)(μ‐Cl)Ni₂(NHC)₂ undergoes homolytic cleavage of the Ni?Ni bond and is in equilibrium with (η⁵‐Cp)Ni(NHC) and (μ‐Cl)₂Ni₂(NHC)₂. There is no evidence that this equilibrium occurs for (μ‐Ind)(μ‐Cl)Ni₂(NHC)₂. DFT calculations suggest that a thermally accessible triplet state facilitates the homolytic dissociation of the Cp bridged dimers, whereas for bridging indenyl species this excited triplet state is significantly higher in energy. In stoichiometric reactions, the Ni^I monomers (η⁵‐Cp)Ni(NHC) or (η⁵‐Ind)Ni(NHC) undergo both oxidative and reductive processes with mild reagents. Furthermore, they are rare examples of active Ni^I precatalysts for the Suzuki–Miyaura reaction. Complexes 1 a , 2 b , 3 a , 4 a and 4 b have been characterized by X‐ray crystallography.     

Symmetric and dissymmetric N‐heterocyclic carbene rhodium(I) complexes: a comparative study of their catalytic activities in transfer hydrogenation reaction

Six new [RhBr(NHC)(cod)] (NHC = N‐heterocyclic carbene; cod = 1,5‐cyclooctadiene) type rhodium complexes ( 4–6 ) have been prepared by the reaction of [Rh(μ‐OMe)(cod)]₂ with a series of corresponding imidazoli(in)ium bromides ( 1–3 ) bearing mesityl (Mes) or 2,4,6‐trimethylbenzyl (CH₂Mes) substituents at N¹ and N³ positions. They have been fully characterized by ¹ H, ¹³ C and heteronuclear multiple quantum correlation NMR analyses, elemental analysis and mass spectroscopy. Complexes of type [(NHC)RhBr(CO)₂] (NHC = imidazol‐2‐ylidene) ( 7b–9b ) were also synthesized to compare σ‐donor/π‐acceptor strength of NHC ligands. Transfer hydrogenation (TH) reaction of acetophenone has been comparatively studied by using complexes 4–6 as catalysts. The symmetrically CH₂Mes‐substituted rhodium complex bearing a saturated NHC ligand ( 5a ) showed the highest catalytic activity for TH reaction. Copyright © 2012 John Wiley & Sons, Ltd.     

The first example of a two‐coordinated AuI atom bonded to an FeII atom and an N‐heterocyclic carbene (NHC) ligand

The aurophilicity exhibited by Au^I complexes depends strongly on the nature of the supporting ligands present and the length of the Au–element (Au—E) bond may be used as a measure of the donor–acceptor properties of the coordinated ligands. A binuclear iron–gold complex, [1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene‐2κC²]dicarbonyl‐1κ²C‐(1η⁵‐cyclopentadienyl)gold(I)iron(II)(Au—Fe) benzene trisolvate, [AuFe(C₅H₅)(C₂₇H₃₆N₂)(CO)₂]·3C₆H₆, was prepared by reaction of K[CpFe(CO)₂] (Cp is cyclopentadienyl) with (NHC)AuCl [NHC = 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene]. In addition to the binuclear complex, the asymmetric unit contains three benzene solvent molecules. This is the first example of a two‐coordinated Au atom bonded to an Fe and a C atom of an N‐heterocyclic carbene.     

Rhodium(I) and Silver(I) Complexes of 4, 5‐Dicyano‐1, 3‐dimesityl‐ and 4, 5‐Dicyano‐1, 3‐dineopentylimidazol‐2‐ylidene

The new N‐heterocyclic carbene (NHC) precursors 4, ‐dicyano‐1, ‐dimesityl‐ ( 9 ) and 4, 5‐dicyano‐1, 3‐dineopentyl‐2‐(pentafluorophenyl)imidazoline ( 14 ) were synthesized. The structure of 9 could be determined by X‐ray crystallography. With the 2‐pentafluorophenyl‐substituted imidazolines 9 and 14 , the [AgCl(NHC)], [RhCl(COD)(NHC)], and [RhCl(CO)₂(NHC)] complexes [NHC = 4, 5‐dicyano‐1, 3‐dimesitylimidazol‐2‐ylidene ( 3 ) and 4, 5‐dicyano‐1, 3‐dineopentylimidazol‐2‐ylidene ( 4 )] were obtained. Crystal structures of [AgCl( 3 )] ( 15 ), [RhCl(COD)( 3 )] ( 17 ), [RhCl(COD)( 4 )] ( 18 ), and [RhCl(CO)₂( 3 )] ( 19 ) were solved and with the crystal data of 19 , the percent buried volume ( %V_bur) of 31.8(±0.1) % was determined for NHC 3 . Infrared spectra of the imidazolines 9 and 14 and of the complexes 15 – 20 were recorded and the CO stretching frequencies of complexes 19 and 20 were used to determine the Tolman electronic parameters of the newly obtained NHCs 3 (TEP: 2060 cm^–1) and 4 (TEP: 2061 cm^–1), thus proving that 1, 3‐substitution of maleonitrile‐NHCs does not have a significant effect for the high π‐acceptor strength of these carbenes.     

Catalytic activities in direct arylation of novel palladium N‐heterocyclic carbene complexes

Eight novel palladium N‐heterocyclic carbene (Pd‐NHC) complexes were synthesized by the reaction of chloro 1,3‐dialkylbenzimidazolin‐2‐ylidene silver(I) complexes with bis(benzonitrile)palladium(II) chloride in dichloromethane. These eight Pd‐NHC complexes are as follows: bis[1‐phenyl‐3‐(2,4,6‐trimethylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐phenyl‐3‐(2,3,5,6‐tetramethylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐phenyl‐3‐(2,3,4,5,6‐pentamethylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐phenyl‐3‐(3,4,5‐trimethoxybenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐(2‐diethylaminoethyl)‐3‐(3‐methylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐(2‐diethylaminoethyl)‐3‐(2,3,5,6‐tetramethylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐(2‐morpholinoethyl)‐3‐naphthalenomethylbenzimidazol‐2‐ylidene]dichloropalladium(II) and bis[1‐(2‐morpholinoethyl)‐3‐(2‐methylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II). Also, these synthesized complexes were fully characterized using Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopic methods and elemental analysis techniques. These synthesized novel Pd‐NHC complexes were tested as catalysts in the direct arylation of 2‐n‐butylthiophene, 2‐n‐butylfuran and 2‐isopropylthiazole with various aryl bromides at 130°C for 1 h. The complexes showed very good catalytic activities in these reactions. Copyright © 2014 John Wiley & Sons, Ltd.     

Chromium-silicon multiple bonds: the chemistry of terminal N-heterocyclic-carbene-stabilized halosilylidyne ligands

An efficient method for the synthesis of the first N‐heterocyclic carbene (NHC)‐stabilized halosilylidyne complexes is reported that starts from SiBr₄. In the first step, SiBr₄ was treated with one equivalent of the N‐heterocyclic carbene 1,3‐bis[2,6‐bis(isopropyl)phenyl]imidazolidin‐2‐ylidene (SIdipp) to give the 4,5‐dihydroimidazolium salt [SiBr₃(SIdipp)]Br ( 1‐Br ), which then was reduced with potassium graphite to afford the silicon(II) dibromide–NHC adduct SiBr₂(SIdipp) ( 2‐Br ) in good yields. Heating 2‐Br with Li[CpCr(CO)₃] afforded the complex [Cp(CO)₂Cr?SiBr(SIdipp)] ( 3‐Br ) upon elimination of CO. Complex 3‐Br features a trigonal‐planar‐coordinated silicon center and a very short Cr?Si double bond. Similarly, the reaction of SiCl₂(SIdipp) ( 2‐Cl ) with Li[CpCr(CO)₃] gave the analogous chloro derivative [Cp(CO)₂Cr?SiCl(SIdipp)] ( 3‐Cl ). Complex 3‐Br undergoes an NHC exchange with 1,3‐dihydro‐4,5‐dimethyl‐1,3‐bis(isopropyl)‐2H‐imidazol‐2‐ylidene (IMe₂iPr₂) to give the complex [Cp(CO)₂CrSiBr(IMe₂iPr₂)₂] ( 4‐Br ). Compound 4‐Br features a distorted‐tetrahedral four‐coordinate silicon center. Bromide abstraction occurs readily from 4‐Br with Li[B(C₆F₅)₄] to give the putative silylidene complex salt [Cp(CO)₂Cr?Si(IMe₂iPr₂)₂][B(C₆F₅)₄], which irreversibly dimerizes by means of an Si‐promoted electrophilic activation of one carbonyl oxygen atom to yield the dinuclear siloxycarbyne complex [Cp(CO)Cr{(μ‐CO)Si(IMe₂iPr₂)₂}₂‐ Cr(CO)Cp][B(C₆F₅)₄]₂ ( 5 ). All compounds were fully characterized, and the molecular structures of 2‐Br – 5‐Br were determined by single‐crystal X‐ray diffraction. DFT calculations of 3‐Br and 3‐Cl and their carbene dissociation products [Cp(CO)₂Cr?Si? X] (X=Cl, Br) were carried out, and the electronic structures of 3‐Br , 3‐Cl and [Cp(CO)₂Cr?Si? X] were analyzed by the natural bond orbital method in combination with natural resonance theory.     

Synthesis and Reactivity of Nickel‐Stabilised μ2:η2,η2‐P2, As2 and PAs Units

The reactivity of two paramagnetic nickel(I) compounds, CpNi(NHC) (where Cp=cyclopentadienyl; NHC=1,3‐bis(2,4,6‐trimethylphenyl)imidazol‐2‐ylidene (IMes) or 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene (IPr)), towards [Na(dioxane)_x][PnCO] (Pn=P, As) is described. These reactions afford symmetric bimetallic compounds (μ²:η²,η²‐Pn₂){Ni(NHC)(CO)}₂. Several novel intermediates en route to such species are identified and characterised, including a compound containing the PCO^? anion in an unprecedented μ²:η²,η²‐binding mode. Ultimately, on treatment of the (μ²:η²,η²‐Pn₂){Ni(IMes)(CO)}₂ compounds with carbon monoxide, the Pn₂ units can be released, affording P₄ in the case of the phosphorus‐containing species, and elemental arsenic in the case of (μ²:η²,η²‐As₂){Ni(IMes)(CO)}₂.     

Synthesis,characterization and catalytic activity in Suzuki–Miyaura coupling of palladacycle complexes with n‐butyl‐substituted N‐heterocyclic carbene ligands

A series of monomeric palladacycle complexes bearing n‐butyl‐substituted N‐heterocyclic carbenes, namely [Pd(NHC)X(dmba)] (dmba: dimethylbenzylamine and [Pd(NHC)X(ppy)]; NHC: 1‐n‐butyl‐3‐substituted benzylimidazol‐2‐ylidene; ppy: 2‐phenylpyridine), were prepared either by transmetallation from the corresponding silver carbene complexes or by the reaction of the corresponding acetate‐bridged palladacycle dimer with N‐heterocyclic carbene ligands in high yields. The palladium(II) complexes were characterized using elemental analyses, APCI‐MS, ¹H NMR and ¹³C NMR spectroscopies. These complexes are efficient in the Suzuki–Miyaura coupling reaction between phenylboronic acid and aryl bromides.     

Facile Access to Transition‐Metal–Carbonyl Complexes with an Amidinate‐Stabilized Chlorosilylene Ligand

Three transition‐metal–carbonyl complexes [V( L )(CO)₃(Cp)] ( 1 ), [Co( L )(CO)(Cp)] ( 2 ), and [Co( L₂ )(CO)₃]⁺[CoCO)₄]^? ( 3 ), each containing stable N‐heterocyclic‐chlorosilylene ligands ( L ; L =PhC(NtBu)₂SiCl) were synthesized from [V(CO)₄(Cp)], [Co(CO)₂(Cp)], and Co₂(CO)₈, respectively. Complexes 1 , 2 , 3 were characterized by NMR and IR spectroscopy, EI‐MS spectrometry, and elemental analysis. The molecular structures of compounds 1 , 2 , 3 were determined by single‐crystal X‐ray diffraction.     

Highly Effective Water Oxidation Catalysis with Iridium Complexes through the Use of NaIO4

Exceptional water oxidation (WO) turnover frequencies (TOF=17 000 h^?1), and turnover numbers (TONs) close to 400 000, the largest ever reported for a metal‐catalyzed WO reaction, have been found by using [Cp*Ir^III(NHC)Cl₂] (in which NHC=3‐methyl‐1‐(1‐phenylethyl)‐imidazoline‐2‐ylidene) as the pre‐catalyst and NaIO₄ as oxidant in water at 40 °C. The apparent TOF for [Cp*Ir^III(NHC)X₂] ( 1 X , in which X stands for I ( 1 I ), Cl ( 1 Cl ), or triflate anion ( 1 OTf )) and [(Cp*‐NHCMe)Ir^IIII₂] ( 2 ) complexes, is kept constant during almost all of the O₂ evolution reaction when using NaIO₄ as oxidant. The TOF was found to be dependent on the ligand and on the anion (TOF ranging from ≈600 to ≈1100 h^?1 at 25 °C). Degradation of the complexes by oxidation of the organic ligands upon reaction with NaIO₄ has been investigated. ¹H NMR, ESI‐MS, and dynamic light‐scattering measurements (DLS) of the reaction medium indicated that the complex undergoes rapid degradation, even at low equivalents of oxidant, but this process takes place without formation of nanoparticles. Remarkably, three‐month‐old solution samples of oxidized pre‐catalysts remain equally as active as freshly prepared solutions. A UV/Vis feature band at λ_max=405 nm is observed in catalytic reaction solutions only when O₂ evolves, which may be attributed to a resting state iridium speciation, most probably Ir–oxo species with an oxidation state higher than IV.     

Novel Benzyl‐ or 4‐Cyanobenzyl‐Substituted N‐Heterocyclic (Bromo)(carbene)silver(I) and (Carbene)(chloro)gold(I) Complexes: Synthesis and Preliminary Cytotoxicity Studies

N‐Heterocyclic carbene (NHC) complexes bromo(1,3‐dibenzyl‐1,3‐dihydro‐2H‐imidazol‐2‐ylidene)silver(I) ( 2a ), bromo[1‐(4‐cyanobenzyl)‐3‐methyl‐1,3‐dihydro‐2H‐imidazol‐2‐ylidene]silver(I) ( 2b ), and bromo[1‐(4‐cyanobenzyl)‐3‐methyl‐1,3‐dihydro‐2H‐benzimidazol‐2‐ylidene]silver(I) ( 2c ) were prepared by the reaction of 1,3‐dibenzyl‐1H‐imidazol‐3‐ium bromide ( 1a ), 3‐(4‐cyanobenzyl)‐1‐methyl‐1H‐imidazol‐3‐ium bromide ( 1b ), and 3‐(4‐cyanobenzyl)‐1‐methyl‐1H‐benzimidazol‐3‐ium bromide ( 1c ), respectively, with silver(I) oxide. NHC Complexes chloro(1,3‐dibenzyl‐1,3‐dihydro‐2H‐imidazol‐2‐ylidene)gold(I) ( 3a ), chloro[1‐(4‐cyanobenzyl)‐3‐methyl‐1,3‐dihydro‐2H‐imidazol‐2‐ylidene]gold(I) ( 3b ), and chloro[1‐(4‐cyanobenzyl)‐3‐methyl‐1,3‐dihydro‐2H‐benzimidazol‐2‐ylidene]gold(I) ( 3c ) were prepared via transmetallation of corresponding (bromo)(NHC)silver(I) complexes with chloro(dimethylsulfido)gold(I). The complex 3a was characterized in two polymorphic forms by single‐crystal X‐ray diffraction showing two rotamers in the solid state. The cytotoxicities of all three bromo(NHC)silver(I) complexes and three (chloro)(NHC)gold(I) complexes were investigated through 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl‐2H‐tetrazolium bormide (MTT)‐based preliminary in vitro testing on the Caki‐1 cell line in order to determine their IC₅₀ values. (Bromo)(NHC)silver(I) complexes 2a – 2c and (chloro)(NHC)gold(I) complexes 3a – 3c were found to have IC₅₀ values of 27±2, 28±2, 34±6, 10±1, 12±5, and 12±3 μM , respectively, on the Caki‐1 cell line.     

Ring Contraction by NHC‐Induced Pnictogen Abstraction

The reaction of [Cp′′′Co(η⁴‐P₄)] ( 1 ) (Cp′′′=1,2,4‐tBu₃C₅H₂) with ^MeNHC (^MeNHC=1,3,4,5‐tetramethylimidazol‐2‐ylidene) leads through NHC‐induced phosphorus cation abstraction to the ring contraction product [(^MeNHC)₂P][Cp′′′Co(η³‐P₃)] ( 2 ), which represents the first example of an anionic CoP₃ complex. Such NHC‐induced ring contraction reactions are also applicable for triple‐decker sandwich complexes. The complexes [(Cp*Mo)₂(μ,η^6:6‐E₆)] ( 3 a , 3 b ) (Cp*=C₅Me₅; E=P, As) can be transformed to the complexes [(^MeNHC)₂E][(Cp*M)₂(μ,η^3:3‐E₃)(μ,η^2:2‐E₂)] ( 4 a , 4 b ), with 4 b representing the first structurally characterized example of an NHC‐substituted As^I cation. Further, the reaction of the vanadium complex [(Cp*V)₂(μ,η^6:6‐P₆)] ( 5 ) with ^MeNHC results in the formation of the unprecedented complexes [(^MeNHC)₂P][(Cp*V)₂(μ,η^6:6‐P₆)] ( 6 ), [(^MeNHC)₂P][(Cp*V)₂(μ,η^5:5‐P₅)] ( 7 ) and [(Cp*V)₂(μ,η^3:3‐P₃)(μ,η^1:1‐P{^MeNHC})] ( 8 ).     

New Heteronuclear Bridged Borylene Complexes That Were Derived from [{Cp*CoCl}2] and Mono‐Metal?Carbonyl Fragments

The synthesis, structural characterization, and reactivity of new bridged borylene complexes are reported. The reaction of [{Cp*CoCl}₂] with LiBH₄ ? THF at ?70 °C, followed by treatment with [M(CO)₃(MeCN)₃] (M=W, Mo, and Cr) under mild conditions, yielded heteronuclear triply bridged borylene complexes, [(μ₃‐BH)(Cp*Co)₂(μ‐CO)M(CO)₅] ( 1 – 3 ; 1 : M=W, 2 : M=Mo, 3 : M=Cr). During the syntheses of complexes 1 – 3 , capped‐octahedral cluster [(Cp*Co)₂(μ‐H)(BH)₄{Co(CO)₂}] ( 4 ) was also isolated in good yield. Complexes 1 – 3 are isoelectronic and isostructural to [(μ₃‐BH)(Cp*RuCO)₂(μ‐CO){Fe(CO)₃}] ( 5 ) and [(μ₃‐BH)(Cp*RuCO)₂(μ‐H)(μ‐CO){Mn(CO)₃}] ( 6 ), with a trigonal‐pyramidal geometry in which the μ₃‐BH ligand occupies the apical vertex. To test the reactivity of these borylene complexes towards bis‐phosphine ligands, the room‐temperature photolysis of complexes 1 – 3 , 5 , 6 , and [{(μ₃‐BH)(Cp*Ru)Fe(CO)₃}₂(μ‐CO)] ( 7 ) was carried out. Most of these complexes led to decomposition, although photolysis of complex 7 with [Ph₂P(CH₂)_nPPh₂] (n=1–3) yielded complexes 9 – 11 , [3,4‐(Ph₂P(CH₂)_nPPh₂)‐closo‐1,2,3,4‐Ru₂Fe₂(BH)₂] ( 9 : n=1, 10 : n=2, 11 : n=3). Quantum‐chemical calculations by using DFT methods were carried out on compounds 1 – 3 and 9 – 11 and showed reasonable agreement with the experimentally obtained structural parameters, that is, large HOMO–LUMO gaps, in accordance with the high stabilities of these complexes, and NMR chemical shifts that accurately reflected the experimentally observed resonances. All of the new compounds were characterized in solution by using mass spectrometry, IR spectroscopy, and ¹H, ¹³C, and ¹¹B NMR spectroscopy and their structural types were unequivocally established by crystallographic analysis of complexes 1 , 2 , 4 , 9 , and 10 .     

Enhanced π‐back‐donation resulting in the trans labilization of a pyridine ligand in an N‐heterocyclic carbene (NHC) PdII precatalyst: a case study

The molecular structure of the benzimidazol‐2‐ylidene–PdCl₂–pyridine‐type PEPPSI (pyridine‐enhanced precatalyst, preparation, stabilization and initiation) complex {1,3‐bis[2‐(diisopropylamino)ethyl]benzimidazol‐2‐ylidene‐κC²}dichlorido(pyridine‐κN)palladium(II), [PdCl₂(C₅H₅N)(C₂₃H₄₀N₄)], has been characterized by elemental analysis, IR and NMR spectroscopy, and natural bond orbital (NBO) and charge decomposition analysis (CDA). Cambridge Structural Database (CSD) searches were used to understand the structural characteristics of the PEPPSI complexes in comparison with the usual N‐heterocyclic carbene (NHC) complexes. The presence of weak C—H…Cl‐type hydrogen‐bond and π–π stacking interactions between benzene rings were verified using NCI plots and Hirshfeld surface analysis. The preferred method in the CDA of PEPPSI complexes is to separate their geometries into only two fragments, i.e. the bulky NHC ligand and the remaining fragment. In this study, the geometry of the PEPPSI complex is separated into five fragments, namely benzimidazol‐2‐ylidene (Bimy), two chlorides, pyridine (Py) and the Pd^II ion. Thus, the individual roles of the Pd atom and the Py ligand in the donation and back‐donation mechanisms have been clearly revealed. The NHC ligand in the PEPPSI complex in this study acts as a strong σ‐donor with a considerable amount of π‐back‐donation from Pd to C_carbene. The electron‐poor character of Pd^II is supported by π‐back‐donation from the Pd centre and the weakness of the Pd—N(Py) bond. According to CSD searches, Bimy ligands in PEPPSI complexes have a stronger σ‐donating ability than imidazol‐2‐ylidene ligands in PEPPSI complexes.     

Facile Access to NaOC≡As and Its Use as an Arsenic Source To Form Germylidenylarsinidene Complexes

A facile, one‐pot synthesis of [Na(OC≡As)(dioxane)_x ] (x =2.3–3.3) in 78 % yield is reported through the reaction of arsine gas with dimethylcarbonate in the presence of NaO^t Bu and 1,4‐dioxane. It has been employed for the synthesis of the first arsaketenyl‐functionalized germylene [LGeAsCO] ( 2 , L=CH[CMeN(Dipp)]₂; Dipp=2,6‐ⁱ Pr₂C₆H₃) from the reaction with LGeCl ( 1 ). Upon exposure to ambient light, 2 undergoes CO elimination to form the 1,3‐digerma‐2,4‐diarsacyclobutadiene [L₂Ge₂As₂] ( 3 ), which contains a symmetric Ge₂As₂ ring with ylide‐like Ge=As bonds. Remarkably, the CO ligand located at the arsenic center of 2 can be exchanged with PPh₃ or an N‐heterocyclic carbene ^{i Pr}NHC donor (^{i Pr}NHC=1,3‐diisopropyl‐4,5‐dimethylimidazol‐2‐ylidene) to afford the novel germylidenylarsinidene complexes [LGe‐AsPPh₃] ( 4 ) and [LGe‐As(^{i Pr}NHC)] ( 5 ), respectively, demonstrating transition‐metal‐like ligand substitution at the arsinidene‐like As atom. The formation of 2 – 5 and their electronic structures have been studied by DFT calculations.     

Umpolung of Methylenephosphonium Ions in Their Manganese Half‐Sandwich Complexes and Application to the Synthesis of Chiral Phosphorus‐Containing Ligand Scaffolds

Half‐sandwich manganese methylenephosphonium complexes [Cp(CO)₂Mn(η²‐R₂P?C(H)Ph)]BF₄ were obtained in high yield through a straightforward reaction sequence involving a classical Fischer‐type manganese complex and a secondary phosphine as key starting materials. The addition of various nucleophiles (Nu) to these species took place regioselectively at the double‐bonded carbon center of the coordinated methylenephosphonium ligand R₂P⁺?C(H)Ph to produce the corresponding chiral phosphine complexes [Cp(CO)₂Mn(κ¹‐R₂P? C(H)(Ph)Nu)], from which the phosphines were ultimately recovered as free entities upon simple irradiation with visible light. The synthetic potential of this umpolung approach is illustrated herein by the preparation of novel chiral pincer‐type phosphine–NHC–phosphine ligand architectures.     

CH–π and CF–π Interactions Lead to Structural Changes of N‐Heterocyclic Carbene Palladium Complexes

The role of CH–π and CF–π interactions in determining the structure of N‐heterocyclic carbene (NHC) palladium complexes were studied using ¹H NMR spectroscopy, X‐ray crystallography, and DFT calculations. The CH–π interactions led to the formation of the cis‐anti isomers in 1‐aryl‐3‐isopropylimidazol‐2‐ylidene‐based [(NHC)₂PdX₂] complexes, while CF–π interactions led to the exclusive formation of the cis‐syn isomer of diiodobis(3‐isopropyl‐1‐pentafluorophenylimidazol‐2‐ylidene) palladium(II).     

Oxidation‐Triggered Ring‐Opening Metathesis Polymerization

Eight new N‐Hoveyda‐type complexes were synthesized in yields of 67–92 % through reaction of [RuCl₂(NHC)(Ind)(py)] (NHC=1,3‐bis(2,4,6‐trimethylphenylimidazolin)‐2‐ylidene (SIMes) or 1,3‐bis(2,6‐diisopropylphenylimidazolin)‐2‐ylidene (SIPr), Ind=3‐phenylindenylid‐1‐ene, py=pyridine) with various 1‐ or 1,2‐substituted ferrocene compounds with vinyl and amine or imine substituents. The redox potentials of the respective complexes were determined; in all complexes an iron‐centered oxidation reaction occurs at potentials close to E=+0.5 V. The crystal structures of the reduced and of the respective oxidized Hoveyda‐type complexes were determined and show that the oxidation of the ferrocene unit has little effect on the ruthenium environment. Two of the eight new complexes were found to be switchable catalysts, in that the reduced form is inactive in the ring‐opening metathesis polymerization of cis‐cyclooctene (COE), whereas the oxidized complexes produce polyCOE. The other complexes are not switchable catalysts and are either inactive or active in both reduced and oxidized states.     

N‐heterocyclic carbene complexes of Rh(I) and electronic effects on catalysts for 1,2‐addition of phenylboronic acid to aldehydes

1,3‐Diarylsubstituted imidazolinium salts, (NHC‐H)Cl, 3, containing hydrogen or alkyl groups at the 4,5‐positions of the imidazolidine ring, served as precursors to rhodium(I) complexes [RhCl(NHC)COD], 4, which were converted into cis‐[RhCl(NHC)(CO)₂] complexes, 5. All compounds prepared were characterized by elemental analyses, ¹H NMR and ¹³C NMR. The relative σ‐donor/π‐acceptor strength of the NHC ligands was determined by means of IR spectroscopy of 5. The ability of NHCs in 4 to enchance activity was explored in the 1,2‐addition of phenylboronic acid to aldehydes. A good correlation was observed between catalytic activity and the electron‐donating power of the NHC ligands. Copyright © 2010 John Wiley & Sons, Ltd.     

Piperazine‐ and DABCO‐bridged dinuclear N‐heterocyclic carbene palladium complexes: synthesis,structure and application to Hiyama coupling reaction

Four dinuclear N ‐heterocyclic carbene (NHC) palladium complexes were prepared by reaction of imidazolinium salts, PdCl₂ and bridging ligands (piperazine and DABCO) in one pot or by direct cleavage of the chloro‐bridged dimeric compounds [Pd(μ ‐Cl)(Cl)(NHC)]₂ with bridging ligands. All of the complexes were fully characterized using ¹H NMR, ¹³C NMR, high‐resolution mass and infrared spectroscopies, elemental analysis and single‐crystal X‐ray diffraction. The catalytic activities of the obtained palladium catalysts towards Hiyama coupling of aryl chlorides with phenyltrimethoxysilane were investigated and the results showed that the dinuclear palladium complexes were considerably active for the coupling reaction. Copyright © 2016 John Wiley & Sons, Ltd.