A new route to self-assembled tin dioxide nanospheres: fabrication and characterization

Nearly monodispersed self-assembled tin dioxide (SnO2) nanospheres with intense photoluminescence (PL) were synthesized using a new wet chemistry technique. Instead of coprecipitating stannous salts, bulk tin (Sn) metal was oxidized at room temperature in a solution of hydrogen peroxide and deionized water containing polyvinylpyrrolidone (PVP) and ethylenediamine (EDA). SnO2 nanocrystals were produced with diameters of approximately 3.8 nm that spontaneously self-assembled into uniform SnO2 nanospheres with diameters of approximately 30 nm. Analysis was performed by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, selected area electron diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV-vis absorption spectroscopy, PL spectroscopy, and fluorescence lifetime measurements. The SnO2 nanospheres displayed room-temperature purple luminescence with an intense band at 394 nm (approximately 3.15 eV) and a high quantum yield of approximately 15%, likely as a result of emission from the surface states of SnO2/PVP complexes. The present study could open a new avenue to large-scale synthesis of self-assembled functional oxide nanostructures with technological applications as purple emitters, biological labels, gas sensors, lithium batteries, and dye-sensitized solar cells.     

Gold‐loading magnetic core–shell organic/inorganic nanocomposites: facile preparation and multiple properties

Magnetic composite nanospheres (MCS) were first prepared via mini‐emulsion polymerization. Subsequently, the hybrid core–shell nanospheres were used as carriers to support gold nanoparticles. The as‐prepared gold‐loading magnetic composite nanospheres (Au‐MCS) had a hydrophobic core embed with γ‐Fe₃O₄ and a hydrophilic shell loaded by gold nanoparticles. Both the content of γ‐Fe₃O₄ and the size of gold nanoparticles could be controlled in our experiments, which resulted in fabricating various materials. On one hand, the Au‐MCS could be used as a T₂ contrast agent with a relaxivity coefficient of 362 mg^?1 ml S^?1 for magnetic resonance imaging. On the other hand, the Au‐MCS exhibited tunable optical‐absorption property over a wavelength range from 530 nm to 800 nm, which attributed to a secondary growth of gold nanoparticles. In addition, dynamic light scattering results of particle sizing and Zeta potential measurements revealed that Au‐MCS had a good stability in an aqueous solution, which would be helpful for further applications. Finally, it showed that the Au‐MCS were efficient catalysts for reductions of hydrophobic nitrobenzene and hydrophilic 4‐nitrophenol that could be reused by a magnetic separation process. Copyright © 2014 John Wiley & Sons, Ltd.     

Dual‐Pore Mesoporous Carbon@Silica Composite Core–Shell Nanospheres for Multidrug Delivery

Monodispersed mesoporous phenolic polymer nanospheres with uniform diameters were prepared and used as the core for the further growth of core–shell mesoporous nanorattles. The hierarchical mesoporous nanospheres have a uniform diameter of 200 nm and dual‐ordered mesopores of 3.1 and 5.8 nm. The hierarchical mesostructure and amphiphilicity of the hydrophobic carbon cores and hydrophilic silica shells lead to distinct benefits in multidrug combination therapy with cisplatin and paclitaxel for the treatment of human ovarian cancer, even drug‐resistant strains.     

Novel Amphiphilic Degradable Poly(ε‐caprolactone)‐graft‐poly(4‐vinyl pyridine), Poly(ε‐caprolactone)‐graft‐poly(dimethylaminoethyl methacrylate) and Water‐Soluble Derivatives

New amphiphilic graft copolymers that have a poly(ε‐caprolactone) (PCL) biodegradable hydrophobic backbone and poly(4‐vinylpyridine) (P4VP) or poly(2‐(N,N‐dimethylamino)ethyl methacrylate) (PDMAEMA) hydrophilic side chains have been prepared by anionic polymerization of the corresponding 4VP and DMAEMA monomers using a PCL‐based macropolycarbanion as initiator. The water solubility of these amphiphilic copolymers is improved by quaternization, which leads to fully water‐soluble cationic copolymers that give micellar aggregates in deionized water with diameters ranging from 65 to 125 nm. In addition, to improve the hydrophilicity of PCL‐g‐P4VP, grafting of poly(ethylene glycol) (PEG) segments has been carried out to give a water‐soluble double grafted PCL‐g‐(P4VP;PEG) terpolymer.

     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

A Sub‐50‐nm Monosized Superparamagnetic Fe3O4@SiO2 T2‐Weighted MRI Contrast Agent: Highly Reproducible Synthesis of Uniform Single‐Loaded Core–Shell Nanostructures

Oleic acid stabilized superparamagnetic iron oxide nanoparticles (SPION) were selected as the cores for fabrication of sub‐50‐nm monodisperse single‐loaded SPION@SiO₂ core–shell nanostructures. Parameters that influence the formation of SPION@SiO₂ in the water‐in‐oil reverse microemulsion system have been systematically investigated. The sufficiently high concentration of well‐dispersed SPION, together with an appropriately low injection rate of tetraethoxysilane, were found to be the keys to efficiently prevent the homogeneous nucleation of silica and obtain a high‐quality single‐loaded core–shell nanocomposite. A more detailed mechanism for incorporating oleic acid capped inorganic functional nanoparticles into silica is proposed on the basis of previous reports and our new experimental results. Finally, the as‐synthesized SPION@SiO₂ nanospheres are exploited as an MRI‐enhanced contrast agent, and their contrast effect in solution is tested by using a clinical MRI instrument.     

Electrophoretic separation of gold nanoparticles according to bifunctional molecules‐induced charge and size

Gold nanospheres modified with bifunctional molecules have been separated and characterized by using agarose gel electrophoresis as well as optical spectroscopy and electron microscopy. The electrophoretic mobility of a gold nanosphere capped with 11‐mercaptoundecanoic acid (MUA) has been found to depend on the number of MUA molecules per gold nanosphere, indicating that it increases with the surface charge of the nanoparticle. The extinction spectrum of gold nanospheres capped with MUA at an MUA molecules per gold nanosphere value of 1000 and connected via 1,6‐hexanedithiol (HDT) decreases by 33% in magnitude and shifts to the red as largely as 22 nm with the increase of the molar ratio of HDT to MUA (R_HM). Gold nanospheres capped with MUA and connected via HDT have been separated successfully using gel electrophoresis and characterized by measuring reflectance spectra of discrete electrophoretic bands directly in the gel and by monitoring transmission electron microscope images of gold nanoparticles collected from the discrete bands. Electrophoretic mobility has been found to decrease substantially with the increment of HDT to MUA, indicating that the size of aggregated gold nanoparticles increases with the concentration of HDT.     

Polyurethane–oligo(phenylenevinylene) random copolymers: π‐Conjugated pores,vesicles, and nanospheres via solvent‐induced self‐organization

We report a new series of polyurethane–oligo(phenylenevinylene) (OPV) random copolymers and their self‐assembled nanomaterials such as pores, vesicles, and luminescent spheres. The polymers were synthesized through melt transurethane process by reacting a hydroxyl‐functionalized OPV with diurethane monomer and diol under solvent‐free and nonisocyanate conditions. The amount of OPV was varied up to 50 mol % in the feed to incorporate various amounts of π‐conjugated segments in the polyurethane backbone. The π‐conjugated segmented polymers were subjected to solvent induced self‐organization in THF or THF+water to produce variety of morphologies ranging from pores (500 nm to 1 μm) to spheres (100 nm to 2 μm). Upon shining 370‐nm light, the dark solid nanospheres of the copolymers transformed into blue luminescent nanoballs under fluorescence microscope. The mechanistic aspects of the self‐organization process were studied using solution FTIR and photophysical techniques such as absorption and emission to trace the factors which control the morphology. FTIR studies revealed that the hydrogen bonding plays a significant role in the copolymers with lower amount of OPV units. Time resolved fluorescent decay measurements of copolymers revealed that molecular aggregation via π‐conjugated segments play a major role in the samples with higher OPV content in the random block polymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 46: 5897–5915, 2008     

Controlled Preparation and Reactive Silver‐Ion Sorption of Electrically Conductive Poly(N‐butylaniline)–Lignosulfonate Composite Nanospheres

Electroconductive poly(N‐butylaniline)–lignosulfonate (PBA–LS) composite nanospheres were prepared in a facile way by in situ, unstirred polymerization of N‐butylaniline with lignosulfonate (LS) as a dispersant and dopant. The LS content was used to optimize the size, structure, electroconductivity, solubility, and silver ion adsorptive capacity of the PBA–LS nanospheres. Uniform PBA–LS10 nanospheres with a minimal mean diameter of 375 nm and high stability were obtained when the LS content was 10 wt %. The PBA–LS10 nanospheres possess an increased electroconductivity of 0.109 S cm^?1 compared with that of poly(N‐butylaniline) (0.0751 S cm^?1). Furthermore, the PBA–LS10 nanospheres have a maximal silver‐ion sorption capacity of 815.0 mg g^?1 at an initial silver ion concentration of 50 mmol L ^?1 (25 °C for 48 h), an enhancement of 70.4 % compared with PBA. Moreover, a sorption mechanism of silver ions on the PBA–LS10 nanospheres is proposed. TEM and wide‐angle X‐ray diffraction results showed that silver nanoparticles with a diameter size range of 6.8–55 nm was achieved after sorption, indicating that the PBA–LS10 nanospheres had high reductibility for silver ions.     

TiO2 Nanospheres: A Facile Size‐Tunable Synthesis and Effective Light‐Harvesting Layer for Dye‐Sensitized Solar Cells

A facile route to synthesize amorphous TiO₂ nanospheres by a controlled oxidation and hydrolysis process without any structure‐directing agents or templates is presented. The size of the amorphous TiO₂ nanospheres can be easily turned from 20 to 1500 nm by adjusting either the Ti species or ethanol content in the reaction solution. The phase structure of nanospheres can be controlled by hydrothermal treatment. The TiO₂ nanospheres show excellent size‐dependent light‐scattering effects and can be structured into a light‐harvesting layer for dye‐sensitized solar cells with a quite high power conversion efficiency of 9.25 %.     

Self‐Assembled and Size‐Controllable Oligonucleotide Nanospheres for Effective Antisense Gene Delivery through an Endocytosis‐Independent Pathway

The development of efficient gene delivery vectors has faced two major challenges, namely endo‐ and lysosomal escape and intracellular release. To address these problems, we developed an oligonucleotide (ON)‐template‐assisted polymerization approach to create ON nanospheres as gene vectors. Guanidinium‐containing disulfide monomers were organized on the ON templates to increase their effective local concentrations. Consequently, ring‐opening disulfide‐exchange polymerization between monomers was accelerated, further facilitating the self‐assembly of ON nanospheres. The size of these nanospheres was controlled by varying the length of the ON templates. Importantly, the nanospheres can be directly delivered into the cytosol through an endocytosis‐independent pathway, which is followed by intracellular depolymerization in the reductive cytosolic environment to release the packaged ONs, resulting in efficient gene silencing. The ON nanospheres thus hold great promise as candidates for gene therapy.     

Chemosensitization of Cancer Cells via Gold Nanoparticle‐Induced Cell Cycle Regulation

We have previously shown that plasmonic nanoparticles conjugated with nuclear‐targeting and cytoplasm‐targeting peptides (NLS and RGD, respectively) are capable of altering the cell cycle of human oral squamous carcinoma cells (HSC‐3). In the present work, we show that this regulation of the cell cycle can be exploited to enhance the efficacy of a common chemotherapeutic agent, 5‐Fluorouracil, by pretreating cells with gold nanoparticles. Utilizing flow cytometry cell cycle analysis, we were able to quantify the 5‐Fluorouracil efficacy as an accumulation of cells in the S phase with a depletion of cells in the G2/M phase. Two gold nanoparticle sizes were tested in this work; 30 nm with a surface plasmon resonance at 530 nm and 15 nm with a surface plasmon resonance at 520 nm. The 30 nm nuclear‐targeted gold nanoparticles (NLS‐AuNPs) showed the greatest 5‐Fluorouracil efficacy enhancement when 5‐Fluorouracil treatment (500 μm , 48 h) is preceded by a 24‐h treatment with nanoparticles. In conclusion, we show that nuclear‐targeted 30 nm gold nanoparticles enhance 5‐Fluorouracil drug efficacy in HSC‐3 cells via regulation of the cell cycle, a chemosensitization technique that could potentially be expanded to different cell lines and different chemotherapies.     

Two‐dimensional non‐close‐packed arrays of nanoparticles via core‐shell nanospheres and reactive ion etching

Nanosized PTFE/polystyrene core‐shell particles were prepared by seed emulsion polymerization technique starting from PTFE seeds of 20 nm. At the end of the reaction, no residual PTFE nor secondary nucleation was observed and by appropriately choosing the ratio between the monomer and the PTFE seed it was possible to obtain particles, with predetermined size in the range 60–100 nm, featuring an extremely narrow size distribution. These particles were successfully employed as building blocks for the preparation of large scale nanosized monolayers through the floating technique. Reactive ion etching was further applied to modulate the size characteristics of the resulting 2D ordered nanostructure. Although for relatively short RIE times a peculiar continuous morphology was observed in which the particles are interconnected through thin arms, on further increasing the RIE time a well‐organized 2D arrangement of particles with size of about 30 nm was obtained. Considering the shell as an expendable ordering and spacing tool, the use of core‐shell nanospheres allows a wide variety of controlled morphologies to be designed and prepared thus opening new perspectives for nanostructure fabrication processes through nanosphere lithography (NSL). Copyright © 2011 John Wiley & Sons, Ltd.     

Controlled Synthesis of N‐Doped Carbon Nanospheres with Tailored Mesopores through Self‐Assembly of Colloidal Silica

Limited strategies have been established to prepare monodisperse mesoporous carbon nanospheres (MCNs) with tailored pore sizes. In this work, a method is reported to synthesize MCNs by combining polymerization of aniline with co‐assembly of colloidal silica nanoparticles. The controlled self‐assembly behavior of colloidal silica enables the formation of uniform composite nanospheres and convenient modulation over mesopores. After carbonization and removal of sacrificial templates, the resultant MCNs possess tunable mesopores (7–42 nm) and spherical diameters (90–300 nm), as well as high surface area (785–1117 m² g^?1), large pore volume (1.46–2.01 cm³ g^?1) and abundant nitrogen moieties (5.54–8.73 at %). When serving as metal‐free electrocatalysts for the oxygen reduction reaction (ORR), MCNs with an optimum pore size of 22 nm, compared to those with 7 and 42 nm, exhibit the best ORR performance in alkaline medium.     

Chirally Functionalized Hollow Nanospheres Containing L‐Prolinamide: Synthesis and Asymmetric Catalysis

Chirally functionalized hollow nanospheres with different surface properties were successfully synthesized by co‐condensation of (2S,1′R,2′R)‐N‐tert‐butyloxycarbonylpyrrolidine‐2‐carboxylic acid [2′‐(4‐trimethoxysilylbenzylamide)cyclohexyl] amide with 1,2‐bis(trimethoxysilyl)ethane or tetramethoxysilane using F127 (EO₁₀₆PO₇₀EO₁₀₆) as surfactant in water. The TEM and N₂ sorption characterizations show that the particle size of the hollow nanosphere is 15–21 nm with a core diameter of 10–16 nm. These L ‐prolinamide‐functionalized hollow nanospheres are highly efficient solid catalysts for the direct asymmetric aldol reaction between cyclohexanone and aromatic aldehydes. It was found that the addition of water in the reaction system not only enhanced the catalytic activity but also increased the enantioselectivity, which is probably due to the enhanced hydrogen bond between the amide oxygen atom and the hydroxyl group of water. Moreover, the catalytic activity increases sharply as the surface hydrophobicity of the hollow nanospheres increases. These hollow nanospheres are quite stable and can be reused with almost the same enantioselectivity and only a slight decrease in catalytic activity.     

Self‐Assembled Asymmetric Block Copolymer Membranes: Bridging the Gap from Ultra‐ to Nanofiltration

The self‐assembly of block copolymers is an emerging strategy to produce isoporous ultrafiltration membranes. However, thus far, it has not been possible to bridge the gap from ultra‐ to nanofiltration and decrease the pore size of self‐assembled block copolymer membranes to below 5 nm without post‐treatment. It is now reported that the self‐assembly of blends of two chemically interacting copolymers can lead to highly porous membranes with pore diameters as small as 1.5 nm. The membrane containing an ultraporous, 60 nm thin separation layer can fully reject solutes with molecular weights of 600 g mol^?1 in aqueous solutions with a water flux that is more than one order of magnitude higher than the permeance of commercial nanofiltration membranes. Simulations of the membrane formation process by dissipative particle dynamics (DPD) were used to explain the dramatic observed pore size reduction combined with an increase in water flux.     

Regioselective Amine–Borane Cyclization: Towards the Synthesis of 1,2‐BN‐3‐Cyclohexene by Copper‐Assisted Triazole/Gold Catalysis

The combination of triazole/gold (TA‐Au) and Cu(OTf)₂ is identified as the optimal catalytic system for promoting intramolecular hydroboration for the synthesis of a six‐membered cyclic amine–borane. Excellent yields (up to 95 %) and regioselectivities (5‐exo vs. 6‐endo) were achieved through catalyst control and sequential dilution. Good functional‐group tolerance was attained, thus allowing the preparation of highly functionalized cyclic amine–borane substrates, which could not be achieved using other methods. Deuterium‐labeling studies support the involvement of a hydride addition to a gold‐activated alkyne with subsequent C?B bond formation.     

In Situ Formation of Dual‐Phase Thermosensitive Ultrasmall Gold Nanoparticles

A novel method for the in situ synthesis of dual‐phase thermosensitive ultrasmall gold nanoparticles (USGNPs) with diameters in the range of 1–3 nm was developed by using poly(N‐isopropylacrylamide)‐block‐poly(N‐phenylethylenediamine methacrylamide) (PNIPAM‐b‐PNPEDMA) amphiphilic diblock copolymers as ligands. The PNPEDMA block promotes the in situ reduction of gold precursors to zero‐valent gold and subsequently binds to the surface of gold nanoparticles, while PNIPAM acts as a stabilizing and thermosensitive block. The as‐synthesized USGNPs stabilized by a thermosensitive PNIPAM layer exhibit a sharp, reversible, clear–opaque transition in aqueous solution between 30 and 38 °C. An unprecedented finding is that these USGNPs also show a reversible soluble–precipitate transition in nonpolar organic solvents such as chloroform at around 0 °C under acidic conditions.     

Hollow‐Shell‐Structured Nanospheres: A Recoverable Heterogeneous Catalyst for Rhodium‐Catalyzed Tandem Reduction/Lactonization of Ethyl 2‐Acylarylcarboxylates to Chiral Phthalides

Chiral organorhodium‐functionalized hollow‐shell‐structured nanospheres were prepared by immobilization of a chiral N‐sulfonylated diamine‐based organorhodium complex within an ethylene‐bridged organosilicate shell. Structural analysis and characterization reveal its well‐defined single‐site rhodium active center, and transmission electron microscopy images reveal a uniform dispersion of hollow‐shell‐structured nanospheres. As a heterogenous catalyst, it exhibits excellent catalytic activity and enantioselectivity in synthesis of chiral phthalides by a tandem reduction/lactonization of ethyl 2‐acylarylcarboxylates in aqueous medium. The high catalytic performance is attributed to the synergistic effect of the high hydrophobicity and the confined chiral organorhodium catalytic nature. The organorhodium‐functionalized nanospheres could be conveniently recovered and reused at least 10 times without loss of catalytic activity. This feature makes it an attractive catalyst in environmentally friendly organic reactions. The results of this study offer a new approach to immobilize chiral organometal functionalities within the hollow‐shell‐structured nanospheres to prepare materials with high activity in heterogeneous asymmetric catalysis.