Fabrication of Multiresponsive Bioactive Nanocapsules through Orthogonal Self‐Assembly

Multifunctional self‐assembled systems present platforms for fundamental research and practical applications as they provide tunability of structure, functionality, and stimuli responsiveness. Pragmatic structures for biological applications have multiple design requirements, including control of size, stability, and environmental response. Here we present the fabrication of multifunctional nanoparticle‐stabilized capsules (NPSCs) by using a set of orthogonal supramolecular interactions. In these capsules, fluorescent proteins are attached to quantum dots through polyhistidine coordination. These anionic assemblies interact laterally with cationic gold nanoparticles that are anchored to the fatty acid core through guanidinium–carboxylate interactions. The lipophilic core then provides a reservoir for hydrophobic endosome‐disrupting agents, thereby generating a system featuring stimuli‐responsive release of a payload into the cytosol with fluorescence monitoring.     

Supramolecular Dendrimers: Convenient Synthesis by Programmed Self‐Assembly and Tunable Thermoresponsivity

We report here the noncovalent synthesis of thermosensitive dendrimers. Short oligoguanosine strands were linked to the focal point of a dendron by using “click chemistry”, and quadruplex formation was used to drive the self‐assembly process in the presence of metal ions. The dynamic nature of these noncovalent assemblies can be exploited to create combinatorial libraries of dendrimers as demonstrated by the co‐assembly of two components. These supramolecular dendrimers showed thermoresponsive behavior that can be tuned by varying the templating cations or the number of guanines in the oligonucleotide strand.     

Dual‐Mode Controlled Self‐Assembly of TiO2 Nanoparticles Through a Cucurbit[8]uril‐Enhanced Radical Cation Dimerization Interaction

The realization of controllable multicomponent self‐assembly through reversible supramolecular interactions is a challenging goal, and is an important strategy for the fabrication of switchable nanomaterials. Herein we show that the self‐assembly of TiO₂ nanoparticles (NP) functionalized with methyl viologen can be controlled both by light irradiation and chemical reduction through cucurbit[8]uril‐enhanced radical cation dimerization interactions. Moreover, the controlled assembly and disassembly of this system are accompanied by switchable photocatalytic activity of the TiO₂ NPs, which shows potential application as a novel smart and recyclable photocatalyst.     

Morphology‐Controlled Self‐Assembly of an Organic/Inorganic Hybrid Porphyrin Derivative Containing Polyhedral Oligomeric Silsesquioxane (POSS)

An organic/inorganic hybrid porphyrin derivative, namely, metal‐free tetrakisphenyl porphyrin–polyhedral oligomeric silsesquioxanes (H₂TPP‐POSS) was synthesized by azide–alkyne click chemistry. The self‐assembly behavior of H₂TPP‐POSS was systematically studied in CHCl₃ at different concentrations and in solvents with different polarities. Novel nanovesicles could be obtained through the self‐assembly of H₂TPP‐POSS in CHCl₃ at a concentration lower than 10^?4 m. Diffuse microrods formed at a concentration higher than 10^?4 M . Additionally, the polarity of the solvent also greatly influenced the assembled morphologies, and a series of assembled morphologies, including crescent‐shaped micelles, spherical micelles, doughnut‐shaped vesicles, and ordered square sheets, could form in solvents with different polarities.     

Redox‐Controlled Helical Self‐Assembly of a Polyoxometalate Complex

Polyoxometalate (POM) complex (DODA)₂[Mo₆O₁₉] with a symmetrical linear structure was prepared conveniently by replacing the tetrabutylammonium (TBA) counterions of Lindquist‐type cluster (TBA)₂[Mo₆O₁₉] with cationic surfactant dioctadecyldimethylammonium (DODA). A helical self‐assembled structure of the complex was formed in dichloromethane/propanol. The dynamically reversible transformation between helical and spherical assemblies on alternate UV irradiation and H₂O₂ oxidation was characterized by SEM, TEM, and UV/Vis studies. The redox‐controlled morphology change is modulated by variation of the electrostatic interactions between the inorganic polyanion and the organic cation DODA through controlling the redox properties of the POM component, as shown by the XRD, X‐ray photoelectron spectroscopic, and ¹H NMR measurements. The strategy applied herein is a unique example of targeted smart and helical assembly of POM complexes.     

pH‐Switchable Self‐Assembled Materials

Self‐assembled materials, which are able to respond to external stimuli, have been extensively studied over the last decades. A particularly exciting stimulus for a wide range of biomedical applications is the pH value of aqueous solutions, since deprotonation‐protonation events are crucial for structural and functional properties of biopolymers. In living cells and tissues, intra‐ and extracellular pH values are stringently regulated, but can deviate from pH neutral as observed for example in tumorous, inflammatory sites, in endocytic pathways, and specific cellular compartments. By using a pH‐switch as a stimulus, it is thereby possible to address specific targets in order to cause a programmed response of the supramolecular material. This strategy has not only been successfully applied in fundamental research but also in clinical studies. In this feature article, current strategies that have been used in order to design materials with pH‐responsive properties are illustrated. This discussion only addresses selected examples from the last four years, the self‐assembly of polymer‐based building blocks, assemblies emerging from small molecules including surfactants or derived from biological macromolecules, and finally the controlled self‐assembly of oligopeptides.

     

Diarylethene Self‐Assembled Monolayers: Cocrystallization and Mixing‐Induced Cooperativity Highlighted by Scanning Tunneling Microscopy at the Liquid/Solid Interface

Stimulus control over 2D multicomponent molecular ordering on surfaces is a key technique for realizing advanced materials with stimuli‐responsive surface properties. The formation of 2D molecular ordering along with photoisomerization was monitored by scanning tunneling microscopy at the octanoic acid/highly oriented pyrolytic graphite interface for a synthesized amide‐containing diarylethene, which underwent photoisomerization between the open‐ and closed‐ring isomers and also a side‐reaction to give the annulated isomer. The nucleation (K_n) and elongation (K_e) equilibrium constants were determined by analysis of the concentration dependence of the surface coverage by using a cooperative model at the liquid/solid interface. It was found that the annulated isomer has a very large equilibrium constant, which explains the predominantly observed ordering of the annulated isomer. It was also found that the presence of the closed‐ring isomer induces cooperativity into the formation of molecular ordering composed of the open‐ring isomer. A quantitative analysis of the formation of ordering by using the cooperative model has provided a new view of the formation of 2D multicomponent molecular ordering.     

pH‐Responsive Self‐Assembly by Molecular Recognition on a Macroscopic Scale

Macroscopic pH‐responsive self‐assembly is successfully constructed by polyacrylamide(pAAm)‐based gels carrying dansyl (Dns) and β‐cyclodextrin (βCD) residues, which are represented as Dns‐gel and βCD‐gel, respectively. Dns‐gel and βCD‐gel assemble together at pH ≥ 4.0, but disassemble at pH ≤ 3.0. The adhesion strengths for pairs of Dns‐gel/βCD‐gel increase with increasing pH. The fluorescence study on the model system of pAAm modified with 1 mol% Dns moieties (pAAm/Dns) reveals that Dns residues are protonated at a lower pH, which results in the reduction in binding constant (K) for Dns residues and βCD.

     

Multi‐stimuli‐responsive self‐immolative polymer assemblies

Self‐immolative polymers (SIPs) undergo depolymerization in response to the cleavage of stimuli‐responsive end‐caps from their termini. Some classes of SIPs, including polycarbamates, have depolymerization rates that depend on environmental factors such as solvent and pH. In previous work, hydrophobic SIPs have been incorporated into amphiphilic block copolymers and used to prepare nanoassemblies. However, stimuli‐responsive hydrophilic blocks have not previously been incorporated. In this work, we synthesized amphiphilic copolymers composed of a hydrophobic polycarbamate SIP block and a hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) block connected by a UV light‐responsive linker end‐cap. It was hypothesized that after assembly of the block copolymers into nanoparticles, chain collapse of the PDMAEMA above its lower critical solution temperature (LCST) might change the environment of the SIP block, thereby altering its depolymerization rate. Self‐assembly of the block copolymers was performed, and the depolymerization of the resulting assemblies was studied by fluorescence spectroscopy, dynamic light scattering, and NMR spectroscopy. At 20 °C, the system exhibited a selective response to the UV light. At 65 °C, above the LCST of PDMAEMA, the systems underwent more rapid depolymerization, suggesting that the increase in rate arising from the higher temperature dominated over environmental effects arising from chain collapse. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1868–1877     

Self‐Assembly and Dispersion of Chromogenic Molecules: A Versatile and General Approach for Self‐Assessing Polymers

Summary: Self‐assessing polymer blends based on poly(ethylene terephthalate glycol) or linear low‐density polyethylene and small amounts (0.5–2% w/w) of chromogenic sensor dyes are prepared and investigated. The cyano‐substituted oligo(p‐phenylene vinylene) dyes employed in the study exhibit pronounced optical absorption changes upon self‐assembly, because of charge‐transfer interactions or conformation changes. The extent of dye aggregation (and therewith the optical absorption characteristics) in these blends is significantly influenced by exposure to external stimuli. Subjecting appropriately processed samples to either temperatures above their glass transition or mechanical deformation can significantly change the extent of aggregation, which in turn leads to a color change.

Mechano‐optical response of a 1.0% w/w LLDPE/C18‐RG blend film. Pristine films are orange due to aggregated dye molecules. Deformation leads to dispersion of the dye and irreversibly changes the color to yellow.     

Synthesis,Self‐Assembly,and Multi‐Stimuli Responses of a Supramolecular Block Copolymer

A supramolecular block copolymer is prepared by the molecular recognition of nucleobases between poly(2‐(2‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol) methacrylate)‐SS‐poly(ε‐caprolactone)‐adenine (P(MEO₂MA‐co‐OEGMA)‐SS‐PCL‐A) and uracil‐terminated poly(ethylene glycol) (PEG‐U). Because the block copolymer is linked by the combination of covalent (disulfide bond) and noncovalent (A U) bonds, it not only has similar properties to conventional covalently linked block copolymers but also possesses a dynamic and tunable nature. The copolymer can self‐assemble into micelles with a PCL core and P(MEO₂MA‐co‐OEGMA)/PEG shell. The size and morphologies of the micelles/aggregates can be adjusted by altering the temperature, pH, salt concentration, or adding dithiothreitol (DTT) to the solution. The controlled release of Nile red is achieved at different environmental conditions.

     

Effects of Alkyl Chain Length and Hydrogen Bonds on the Cooperative Self‐Assembly of 2‐Thienyl‐Type Diarylethenes at a Liquid/Highly Oriented Pyrolytic Graphite (HOPG) Interface

An appropriate understanding of the process of self‐assembly is of critical importance to tailor nanostructured order on 2D surfaces with functional molecules. Photochromic compounds are promising candidates for building blocks of advanced photoresponsive surfaces. To investigate the relationship between molecular structure and the mechanism of ordering formation, 2‐thienyl‐type diarylethenes with various lengths of alkyl side chains linked through an amide or ester group were synthesized. Their self‐assemblies at a liquid/solid interface were investigated by scanning tunneling microscopy (STM). The concentration dependence of the surface coverage was analyzed by using a cooperative model for a 2D surface based on two characteristic parameters: the nucleation equilibrium constant (K_n) and the elongation equilibrium constant (K_e). The following conclusions can be drawn. 1) The concentration at which a stable 2D molecular ordering is observed by STM exponentially decreases with increasing length of the alkyl chain. 2) Compounds bearing amide groups have higher degrees of cooperativity in self‐assembly on 2D surfaces (i.e., σ, which is defined as K_n/K_e) than compounds with ester groups. 3) The self‐assembly process of the open‐ring isomer of an ester derivative is close to isodesmic, whereas that of the closed‐ring isomer is cooperative because of the difference in equilibrium constants for the nucleation step (i.e., K_n) between the two isomers.     

Controlled Self‐Assembly of Functional Metal Octaethylporphyrin 1 D Nanowires by Solution‐Phase Precipitative Method

Metal octaethylporphyrin M(OEP) (M=Ni, Cu, Zn, Pd, Ag, and Pt) nanowires are fabricated by a simple solution‐phase precipitative method. By controlling the composition of solvent mixtures, the diameters and lengths of the nanowires can be varied from 20 to 70 nm and 0.4 to 10 μm, respectively. The Ag(OEP) nanowires have lengths up to 10 μm and diameters of 20–70 nm. For the M(OEP) nanowires, the growth orientation and packing of M(OEP) molecules are examined by powder XRD and SAED measurements, revealing that these M(OEP) nanowires are formed by the self‐assembly of M(OEP) molecules through intermolecular π???π interactions along the π???π stacking axis, and the M²⁺ ion plays a key role in the nanowire formation. Using the bottom contact field effect transistor structure and a simple drop‐cast method, a single‐crystal M(OEP) nanowires‐based field effect transistor can be readily prepared with prominent hole transporting behaviour and charge‐carrier mobility up to 10^?3–10^?2 cm² V^?1 s^?1 for holes, which are 10 times higher than that of vacuum‐deposited M(OEP) organic thin‐film transistors (OTFTs).     

Synthesis of a Benzenethiol‐derivatized Porphyrin for Self‐assembly

The synthesis of a benzenethiol‐derivatized porphyrin for flat‐lying self‐assembly on gold substrates is described. Acetyl protected thiol is not stable enough in Pd‐catalyzed reactions. While acrylate derivatives protected thiol group shows good tolerance in Pd‐catalyzed borylations and Suzuki‐Miyaura coupling reactions and no catalyst poisoning was observed.     

Self‐Assembly of Photochromic Diarylethenes with Amphiphilic Side Chains: Core‐Chain Ratio Dependence on Supramolecular Structures

Photochromic diarylethene derivatives having different lengths and numbers of poly(ethylene glycol) side chains were synthesized and their photochromic property and self‐assembling behavior were investigated. The self‐assembling behavior of the derivatives strongly depends upon the ratio between the hydrophobic core and the amphiphilic side chain. According to UV/Vis absorption spectroscopy, CD spectroscopy, and dynamic light scattering experiments, these derivatives showed different size distribution of the assembled structures and different solubility in water. The intensity of the induced CD signal, which was observed in the closed‐ring isomer, was the largest for the molecule having two hexaethylene glycol side chains. The relationship between the core‐chain ratio and regularity of the self‐assembled structure has been investigated.