Synthesis and characterization of UV‐curable ladder‐like polysilsesquioxane

Various ladder‐like structured poly(phenyl‐co‐methacryl silsesquioxane)s (LPMSQ)s with high molecular weight (M_w = 10,000 ～ 40,000) were synthesized by direct hydrolysis and polymerization in the presence of base catalyst at 25 °C. Synthesized LPMSQs mainly showed ladder‐like structure and photo‐cure reaction by 100 mW/cm² (360 nm) for 10 s without any photo‐cure initiators. Chemical composition and structural analysis of the obtained LPMSQs were characterized using ¹H NMR, ²⁹Si NMR, Fourier transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), and X‐ray diffraction (XRD). Physical properties of LPMSQs before and after photcuring were analyzed by Nanoindentation. Surface modulus increased to 8GPa and hardness of thin films increased from 100 to 400 MPa. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Self‐Assembled Gels for Biomedical Applications

Natural and synthetic gel‐like materials have featured heavily in the development of biomaterials for wound healing and other tissue‐engineering purposes. More recently, molecular gels have been designed and tailored for the same purpose. When mixed with, or conjugated to therapeutic drugs or bioactive molecules, these materials hold great promise for treating/curing life‐threatening and degenerative diseases, such as cancer, osteoarthritis, and neural injuries. This focus review explores the latest advances in this field and concentrates on self‐assembled gels formed under aqueous conditions (i.e., self‐assembled hydrogels), and critically compares their performance within different biomedical applications, including three‐dimensional cell‐culture studies, drug delivery, and tissue engineering. Although stability and toxicity issues still need to be addressed in more detail, it is clear from the work reviewed here that self‐assembled gels have a bright future as novel biomaterials.     

Low‐Temperature Sol‐Gel Synthesis of Nanostructured Polymer/Titania Hybrid Films based on Custom‐Made Poly(3‐Alkoxy Thiophene)

A low‐temperature route to directly obtain polymer/titania hybrid films is presented. For this, a custom‐made poly(3‐alkoxy thiophene) was synthesized and used in a sol‐gel process together with an ethylene‐glycol‐modified titanate (EGMT) as a suitable titania precursor. The poly(3‐alkoxy thiophene) was designed to act as the structure‐directing agent for titanium dioxide through selective incorporation of the titania precursor. The nanostructured titania network, embedded in the polymer matrix, is examined with atomic force microscopy (AFM) and scanning electron microscopy (SEM) measurements. By means of the scattering technique grazing incidence wide‐angle X‐ray scattering (GIWAXS), a high degree of crystallinity of the polymer as well as successful transformation of the precursor into the rutile phase of titania is verified. UV/Vis measurements reveal an absorption behavior around 500 nm which is similar to poly(3‐hexyl thiophene), a commonly used polymer for photoelectronic applications, and in addition, the typical UV absorption behavior of rutile titania is observed.     

Simple preparation routes for corrosion protection hybrid sol‐gel coatings on AA 2024

In recent years, many hybrid inorganic‐organic systems have been proposed in order to replace the traditional conversion coatings on metals like aluminum, and some results have been promising. However, many proposed solutions are based on complicated processes which are not easy to be adapted to industrial scale. The aim of this study was to establish a simple process leading to the production of highly efficient corrosion protective hybrid sol‐gel coating systems for the aluminum alloys as replacement for the highly hazardous conventional chromate conversion coatings. Hybrid coatings have been realized by means of the sol‐gel process. CeO₂ and ZnO have been introduced as dispersions of nanoparticles in the system and used as corrosion inhibitors. The aim of this work was to obtain pore‐free coatings with increased barrier properties using nanoparticles that possess the double function of pore fillers and corrosion inhibitors. The proposed processes led to coating materials with good adherence to the aluminum substrate and an extremely long life in the accelerated neutral salt spray test according to DIN ISO 9227. Electrochemical impedance spectroscopy approves these results by high impedance values in the low‐frequency region of the Bode plot. Copyright © 2011 John Wiley & Sons, Ltd.     

Salt‐Induced Fabrication of Superhydrophilic and Underwater Superoleophobic PAA‐g‐PVDF Membranes for Effective Separation of Oil‐in‐Water Emulsions

Conventional polymer membranes suffer from low flux and serious fouling when used for treating emulsified oil/water mixtures. Reported herein is the fabrication of a novel superhydrophilic and underwater superoleophobic poly(acrylic acid)‐grafted PVDF filtration membrane using a salt‐induced phase‐inversion approach. A hierarchical micro/nanoscale structure is constructed on the membrane surface and endows it with a superhydrophilic/underwater superoleophobic property. The membrane separates both surfactant‐free and surfactant‐stabilized oil‐in‐water emulsions under either a small applied pressure (<0.3 bar) or gravity, with high separation efficiency and high flux, which is one to two orders of magnitude higher than those of commercial filtration membranes having a similar permeation property. The membrane exhibits an excellent antifouling property and is easily recycled for long‐term use. The outstanding performance of the membrane and the efficient, energy and cost‐effective preparation process highlight its potential for practical applications.     

Design of Interpenetrated Networks of Mesostructured Hybrid Silica and Nonconductive Poly(vinylidene fluoride)–Cohexafluoropropylene (PVdF–HFP) Polymer for Proton Exchange Membrane Fuel Cell Applications

Organic–inorganic hybrid membranes of poly(vinylidene fluoride)–cohexafluoropropylene (PVdF–HFP) and mesostructured silica containing sulfonic acid groups were synthesized by using the sol‐gel process. These hybrid membranes were prepared by in situ co‐condensation of tetraethoxysilane and an organically modified silane (ormosil) by a self‐assembly route using organic surfactants as templates for tuning the architecture of the hybrid organosilica component. In this paper, we describe the elaboration and characterization of hybrid membranes all the way from the precursor solution to the evaluation of the fuel cell performances. These hybrid materials were extensively characterized by using NMR and IR spectroscopy, electron microscopy, or impedance spectroscopy so as to determinate their physicochemical and electrochemical properties. Even though the ion‐exchange capacity (IEC) was quite weak, the first fuel cell tests performed with these hybrid membranes show promising results relative to optimized Nafion 112 thanks to great water management of the silica inside the hydrophobic polymer.     

Suppression of Thermochromism in a Poly(di‐n‐hexylsilane)‐Zirconia Hybrid

Summary: Poly(di‐n‐hexylsilane) (PDHS)‐containing zirconia hybrid thin films were prepared by a sol‐gel reaction of PDHS copolymers and zirconium alkoxide, and it was found that the thermochromic properties of PDHS due to the transformation of the Si Si main chain were suppressed in the PDHS‐zirconia hybrid thin film.

Structure of poly(di‐n‐hexylsilane)‐zirconia hybrid.     

Synthesis and characterization of polyhedral oligomeric silsesquioxane hybrid co‐crosslinked poly(N‐isopropylacrylamide‐co‐dimethylaminoethyl methacrylate) hydrogels

Polyhedral oligomeric silsesquioxane hybrid temperature and pH double‐responsive hydrogels with organic–inorganic co‐crosslinked networks are synthesized by in situ, free‐radical polymerization of N‐isopropylacrylamide and dimethylaminoethyl methacrylate in the presence of both organic crosslinker N,N′‐methylenebis(acrylamide) (BIS) and inorganic crosslinker octavinyl polyhedral oligomeric silsesquioxane (OvPOSS) in tetrahydrofuran media. The resulting hydrogels (OR‐OvP gels) display obvious temperature and pH double responsiveness, OvPOSS particles dispersed in polymer make a dominant effect on the properties of gels. With the increase of OvPOSS, the aggregation of particles on nano‐ or microscale happens and causes a considerable change on the properties of gels, such as the lower critical solution temperature and better compression strength. Specially, the interconnected microporous structure of gels ascribed to the microphase separation results in faster deswelling rate, which makes the gel become attractive. Besides, the crosslink by BIS intensifies the heterogeneity of gels significantly, which could also be used to adjust the properties of gels. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1494–1504     

Synthesis of organic‐inorganic hybrid gels by means of thiol‐ene and azide‐alkene reactions

Organic–inorganic hybrid gels have been synthesized from a multi‐vinyl functional cyclic siloxane, 1,3,5,7‐tetravinyltetramethylcyclotetrasiloxane (TVMCTS), or a cubic silsesquioxane, octavinyloctasilasesquioxane (PVOSS), and α,ω‐dithiol compounds, 1,6‐hexanedithiol (HDT), 1,10‐decanedithiol (DDT), using thiol‐ene reaction in toluene. The network structure of the resulting gels, mesh size and mesh size distribution, was quantitatively characterized by means of a scanning microscopic light scattering (SMILS). The gels obtained from TVMCTS‐HDT formed homogeneous network structure with 1.5–1.6 nm mesh. Relaxation peaks derived from large clusters and/or micro gels were detected in the SMILS analysis of the TVMCTS‐DDT, PVOSS‐HDT, and PVOSS‐DDT gels besides those from the small meshes. The organic–inorganic hybrid gels were also synthesized from TVMCTS, PVOSS with α,ω‐diazide compounds, 1,6‐hexanediazide (HDA), 1,10‐decanediazide (DDA), using azide‐alkene reaction in toluene. All the gels obtained with the azide‐alkene reaction formed the homogeneous network structure. Enthalpy relaxation at the glass transition of the dried samples was detected by differential scanning calorimetry to study the network uniformity of the original gels. The gels synthesized by the azide‐alkene reaction showed larger enthalpy than the gels synthesized by the thiol‐ene reaction, indicating homogeneous network structure in the former gels. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2229–2238     

Green Approach to the Fabrication of Superhydrophobic Mesh Surface for Oil/Water Separation

We report a simple and environment friendly method to fabricate superhydrophobic metallic mesh surfaces for oil/water separation. The obtained mesh surface exhibits superhydrophobicity and superoleophilicity after it was dried in an oven at 200 °C for 10 min. A rough silver layer is formed on the mesh surface after immersion, and the spontaneous adsorption of airborne carbon contaminants on the silver surface lower the surface free energy of the mesh. No low‐surface‐energy reagents and/or volatile organic solvents are used. In addition, we demonstrate that by using the mesh box, oils can be separated and collected from the surface of water repeatedly, and that high separation efficiencies of larger than 92 % are retained for various oils. Moreover, the superhydrophobic mesh also possesses excellent corrosion resistance and thermal stability. Hence, these superhydrophobic meshes might be good candidates for the practical separation of oil from the surface of water.     

5‐(2‐Mercaptoethyl)‐1H‐tetrazole: Facile Synthesis and Application for the Preparation of Water Soluble Nanocrystals and Their Gels

A facile method for the preparation of the novel capping ligand 5‐(2‐mercaptoethyl)‐1H‐tetrazole for the stabilization of water‐soluble nanocrystals was developed. This effective synthetic procedure is based on the cycloaddition of sodium azide to 3,3′‐dithiobis(propionitrile) followed by the reductive cleavage of a S?S bond with triphenylphosphine. The structure of the synthesized compound was confirmed by single‐crystal X‐ray analysis. A target tetrazole was successfully applied for the direct aqueous synthesis of CdTe and Au nanocrystals. CdTe nanocrystals capped with 5‐(2‐mercaptoethyl)‐1H‐tetrazole were found to reveal high photoluminescence efficiencies (up to 77 %). Nanocrystals capped with this tetrazole ligand are able to build 3D structures in a metal‐ion‐assisted gelation process in aqueous solution. Critical point drying of the as‐formed hydrogels allowed the preparation of the corresponding aerogels, while preserving the mesoporous structure.     

Synthesis and Characterization of a Thermoresponsive Polyoxometalate–Polymer Hybrid

We report the synthesis of the first organo‐POM with thermoresponsive properties. Our concept will provide chemists with a new tool to design POMs whose solubility is reversibly controllable through an external stimulus. POM–polymer TBA₇[POM]‐poly(N,N‐diethylacrylamide) (POM–PDEAAm), was prepared by grafting PDEAAm‐NH₂ (obtained by RAFT polymerization) onto the activated Dawson acyl‐POM, α₂‐[P₂W₁₇O₆₁SnCH₂CH₂C(?O)]^6?. Extensive MS analysis was used to monitor the chain‐functionalization steps and to confirm the formation of the hybrid. Aqueous solutions of the (NH₄)₇[POM–PDEAAm] exhibited a LCST of 38 °C. Thus, the solubility/aggregation of the hybrid was reversibly controlled by changing the temperature. Above 38 °C, the solution became cloudy, and cleared again upon cooling. Dynamic light scattering (DLS) revealed the formation of small aggregates in the range 100 nm. We assumed that the charged POM head units prevented the formation of the larger‐scattering aggregates that are usually observed for PDEAAm, and promoted the formation of micelle‐like structures. The conjugate exhibited a temperature transition, which was different from that of the polymer and depended on the counterions associated with the POM. This result demonstrates the potential for merging organic (in this case, polymer) and inorganic structures to afford materials that exhibit new properties.     

Gel‐to‐Sol and Sol‐to‐Gel Transitions Utilizing the Interaction of α‐Cyclodextrin with Dodecyl Side Chains Attached to a Poly(acrylic acid) Backbone

Summary: By utilizing the interaction of α‐cyclodextrin (α‐CD) with dodecyl side chains in polymers of x mol‐% dodecyl‐modified poly(acrylic acid) (p(AA/C₁₂(x))), systems that undergo gel‐to‐sol and sol‐to‐gel transitions were successfully constructed. Rheological experiments indicated that addition of α‐CD to the hydrogel of p(AA/C₁₂(5)) caused a drastic decrease in the viscosity, while addition of oligo(α‐CD) to the solution of p(AA/C₁₂(2)) led to a remarkable increase in the viscosity.

Photographs for a gel‐to‐sol transition upon addition of α‐CD to 5.0 g · L⁻¹ p(AA/C₁₂(5)).     

Robust Organic/Inorganic Hybrid Porous Thin Films via Breath‐Figure Method and Gelation Process

A novel organic/inorganic hybrid honeycomb patterned porous thin film was prepared using the breath‐figure method combined with a sol‐gel process. An in situ formed gelable block copolymer, formed by mixing poly(styrene‐alt‐maleic anhydride)‐block‐polystyrene (P(St‐a‐MAn)‐b‐PS) and 3‐aminopropyltrimethoxysilane (APS), was used as the structure directing agent. The porous film produced was dipped into an acid aqueous solution to induce a sol‐gel process in the wall of film. As a result of gelation, the structure of this film transformed into a crosslinked silica oxide hybridized with PS, and this film resisted those organic solvents which were once good solvents for the copolymer precursor.