Palladaphosphacyclobutenes as catalysts in Heck and Suzuki reactions

Heck reactions of aryl halides with various olefins and Suzuki reactions of aryl halides with phenylboronic acid catalyzed by palladaphosphacyclobutene have been investigated. The scope of the Heck reaction has been investigated in N,N‐dimethylacetamide at 140 °C using NaOAc as base. Using 0.1% molar ratio of palladaphosphacyclobuyenes, aryl bromides were converted into 1,2‐substitutedethene products in good to high yields through coupling with both vinylarenes and acrylates. Actived aryl chloride reacted with styrene to afford 1,2‐substitutedethene products in moderate yields. The scope of the Suzuki reaction has been conducted in toluene at 110 °C using Cs₂CO₃ as base. Using 0.1% molar ratio of palladaphosphacyclobutene, aryl bromides reacted with phenylboronic acid to afford diaryl derivatives in excellent yield. Copyright © 2008 John Wiley & Sons, Ltd.     

Highly efficient orthopalladated complexes of second and third benzyl amine for catalyzing the Suzuki cross‐coupling reaction

In this work, ortho‐palladated complexes [Pd(µ‐Cl)(C₆H₄CH₂ NRR′‐κ²‐C,N)]₂ and [Pd(C₆H₄CH₂NH₂‐2‐C,N)Cl(Y)] were tested in the Suzuki–Miyaura cross‐coupling reaction. Cyclopalladated Pd(II) complexes as thermally stable catalysts can activate aryl bromides and chlorides. These complexes were active and efficient catalysts for the Suzuki–Miyaura reaction of aryl bromides and even less reactive aryl chlorides. The cross‐coupled products of a variety of aryl bromides and aryl chloride with phenylboronic acid in methanol as solvent at 60 °C were produced in excellent yields. Copyright © 2010 John Wiley & Sons, Ltd.     

Water‐Soluble and Recyclable Cyclopalladated Ferrocenylimine for Suzuki Coupling Reaction

A series of new water‐soluble cyclopalladated ferrocenylimines were designed and prepared. They were efficient catalyst for Suzuki coupling reactions of aryl bromides and phenylboronic acid in neat water under ambient atmosphere. Among of these catalysts, the catalyst ( C₂D ) could be reused for 6 times for the Suzuki coupling reaction of 4‐bromotoluene with phenylboronic acid in EtOH/H₂O under ambient atmosphere, in which no significant loss activity of C₂D was observed.     

Pd(0)‐ S‐propyl‐2‐aminobenzothioate immobilized onto functionalized magnetic nanoporous MCM‐41 as efficient and recyclable nanocatalyst for the Suzuki,Stille and Heck cross coupling reactions

The present work describes the use of Pd(0)‐ S‐propyl‐2‐aminobenzothioate Complex immobilized onto functionalized magnetic nanoporous MCM‐41(Fe₃O₄@MCM‐41@Pd‐SPATB) as efficient and recyclable nano‐organometallic catalyst for C–C bond formation between various aryl halides with phenylboronic acid (Suzuki reaction), aryl halides with triphenyltin chloride (Stille reaction), and aryl halides with n‐butyl acrylate (Heck reaction). All the reactions were carried out in PEG‐400 as green solvent with short reaction time and good to excellent yields. This catalyst was characterized by FT‐IR spectroscopy, XRD, TGA, VSM, ICP‐OES, TEM, EDX and SEM techniques. Ease of operation, high efficiency, recovery and reusability for five continuous cycles without significant loss of its catalytic activities or metal leaching are the noteworthy features of the currently employed heterogeneous catalytic system.     

Enantioselective Arylation of N‐Tosylimines by Phenylboronic Acid Catalysed by a Rhodium/Diene Complex: Reaction Mechanism from Density Functional Theory

A DFT study of the reaction mechanism of the rhodium‐catalysed enantioselective arylation of (E)‐N‐propylidene‐4‐methyl‐benzenesulfonamide by phenylboronic acid [Lin et al J. Am. Chem. Soc.­ 2011 , 133, 12394] is reported. The catalyst ([{Rh(OH)(diene)}₂]) includes a chiral diene ligand and the reaction is conducted in 1,4‐dioxane in the presence of drying agents (4 Å molecular sieves). Because phenylboronic acid is in equilibrium with phenylboroxin and water under the reaction conditions, three catalytic cycles are proposed that differ in the way the transmetallation and the release of the product are brought about, depending on the availability of phenylboronic acid, water and boroxin in the reaction medium. Based on computations, a new mechanism for the title reaction is proposed, in which phenylboronic acid plays the double role of “aryl source” and proton donor. This path does not require the presence of adventitious water molecules, in keeping with a reaction conducted in a dry medium. Comparisons with the generally accepted mechanism for arylation of enones proposed by Hayashi and co‐workers (J. Am. Chem. Soc.­ 2002 , 124, 5052) show that the latter mechanism is less favourable and is not expected to operate in the case of the N‐tosylimine substrate considered herein. Finally, the possibility that phenylboroxin is the aryl source has also been investigated, but is not found to be competitive.     

[PdCl2{8-(di-tert-butylphosphinooxy)quinoline)}]: a highly efficient catalyst for Suzuki-Miyaura reaction

The complex [PdCl₂(P-N)] containing the basic and sterically demanding 8-(di-tert-butylphosphinooxy)quinoline ligand (P-N) is a highly efficient catalyst for the coupling of phenylboronic acid with aryl bromides or aryl chlorides. The influence of solvent and base has been investigated, the highest rates being observed at 110 °C in toluene with K₂CO₃ as the base. With aryl bromides the reaction rates are almost independent on the electronic properties of the para aryl substituents, on the contrary, reduced reaction rates are observed when bulky substituents are present on the substrate. Nevertheless the coupling of 2-bromo-1,3,5-trimethylbenzene with phenylboronic acid can be carried out to completion in 2 h using a catalyst loading of 0.02 mol %. Under optimized reaction conditions, turnover frequencies as high as 1900 h⁻¹ can be obtained in the coupling of 4-chloroacetophenone with phenylboronic acid; lower reaction rates are obtained with substrates bearing EDG substituents on the aryl group.     

Suzuki cross‐coupling reaction of aryl and heterocyclic bromides and aromatic polybromides on a Pd(II)‐hydrotalcite catalyst

The Suzuki cross‐coupling reaction of various bromine‐containing substrates and phenylboronic acid in toluene at 90 °C on a Pd(AcO)₂Py₂ catalyst supported on an Mg? Al hydrotalcite, using K₂CO₃ as the base, was studied. The conversion and selectivity results obtained for many of the substrates were excellent and similar to those provided by more active or even homogeneous catalysts. The reactions of aryl polybromides and phenylboronic acid gave the corresponding polyaromatic compounds in variable yields depending on the particular substrate. Arylation occurred in a consecutive manner by substitution of the different Br atoms. ICP‐MS measurements of the palladium content of the catalyst performed prior to and after the reaction revealed that part of the metal is incorporated into the bulk solution; therefore, the catalytic process is not purely heterogeneous. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of novel palladium N‐heterocyclic‐carbene complexes as catalysts for Heck and Suzuki cross‐coupling reactions

Novel palladium‐1,3‐dialkylperhydrobenzimidazolin‐2‐ylidene (2a–c) and palladium‐1,3‐dialkylimidazolin‐2‐ylidene complexes (4a,b) have been prepared and characterized by C, H, N analysis, ¹H‐NMR and ¹³C‐NMR. Styrene or phenylboronic acid reacts with aryl halide derivatives in the presence of catalytic amounts of the new palladium‐carbene complexes, PdCl₂(1,3‐dialkylperhydrobenzimidazolin‐2‐ylidene) or PdCl₂(1,3‐dialkylimidazolin‐2‐ylidene) to give the corresponding C? C coupling products in good yields. Copyright © 2006 John Wiley & Sons, Ltd.     

Magnetically‐recoverable Schiff Base Complex of Pd (II) Immobilized on Fe3O4@SiO2 Nanoparticles: An Efficient Catalyst for Mizoroki‐Heck and Suzuki‐Miyaura Coupling Reactions

The activity of Pd(II)‐Schiff base complex molecules grafted on the surface of Fe₃O₄@SiO₂ particles were investigated in the palladium‐catalyzed coupling reactions of aryl halides with alkenes (Mizoroki‐Heck reaction) and phenylboronic acids (Suzuki‐Miyaura reaction) in the absence of phosphorous ligands. This method shows notable advantages such as heterogeneous nature of the catalyst, excellent yields, short reaction times, easy preparation, simplicity of operation, and cleaner reaction profiles. The catalyst can be separated from the reaction mixture by applying a permanent magnet externally and can be reused for several times without significant loss of activity. Also, the amount of palladium leaching has been determined by ICP analysis.     

Iminophosphine palladium catalysts for Suzuki carbonylative coupling reaction

Three iminophosphine ligands having soft phosphorus and hard nitrogen atoms and their Pd(II) complexes were synthesized and characterized using ¹H NMR, ¹³C NMR, ³¹P NMR and Fourier transform infrared spectroscopic techniques. Also, electrochemical properties of the iminophosphines and their Pd(II) complexes were investigated in acetonitrile–tetrabutylammonium perchlorate solution with cyclic and square wave voltammetry techniques. All Pd(II) complexes were evaluated as catalysts for carbonylative cross‐coupling reactions of aryl iodides with phenylboronic acid. The Suzuki carbonylation of aryl iodides at 80 °C under balloon pressure of carbon monoxide in the presence of K₂CO₃ as a base was examined, and good to high conversions and excellent selectivities were obtained.     

Palladium nanoparticles supported on SiO2 by chemical vapor deposition (CVD) technique as efficient catalyst for Suzuki–Miyaura coupling of aryl bromides and iodides: selective coupling of halophenols

Nanoparticles of palladium were supported on SiO₂ by chemical vapor deposition technique. The obtained Pd nanocatalyst was characterized by various techniques. This catalyst was found to be very efficient for the selective cross‐coupling of hydroxyl‐substituted aryl iodides and bromide with arylboronic acids in water at room temperature to produce the corresponding hydroxyl‐substituted biaryls. Coupling of phenylboronic acid with aryl iodides and bromides carrying substituents other than hydroxy group was also performed efficiently in refluxing ethanol. Copyright © 2012 John Wiley & Sons, Ltd.     

Preparation,characterization and application of silica‐supported palladium complex as a new and heterogeneous catalyst for Suzuki and Sonogashira reactions

An efficient heterogeneous Pd catalytic system has been developed, based on immobilization of Pd nanoparticles (PNPs) on a silica‐bonded propylamine–cyanuric–cysteine (SiO₂–pA–Cyan–Cys) substrate. The synthesized catalyst was characterized by transmission electron microscopy, scanning electron microscopy, FT‐IR, N₂ adsorption analysis (BET), TGA and inductively coupled plasma/atomic emission spectroscopy, and catalytic activity of this catalyst was investigated in the Suzuki and Sonogashira cross‐coupling reactions. The catalysts showed excellent performance in these two reactions, including various aryl halide derivatives (except aryl chloride derivatives) with phenylboronic acid and phenylacetylene under green conditions. Moreover, the catalyst was recycled for several runs without any significant loss of catalytic activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Pd(II) complexes of N(4)‐substituted phenylaminoacetohydrazone and biacetylmonooxime: synthesis,characterization, structures and catalytic behaviour towards Suzuki–Miyaura coupling reactions

The reaction of [PdCl₂(CH₃CN)₂] and N(4)‐substituted phenylaminoacetohydrazone ligands (LH) in methanol at room temperature afforded air‐ and moisture‐stable palladium(II) complexes of two types with general formulae [Pd(LH)Cl] and [Pd₂(LH)(L)]Cl. An unusual coordination mode of ligand LH is observed, in which the ligand coordinates through N(4)H nitrogen and without enolization of the carbonyl group of the hydrazone moiety in both mono‐ and bimetallic complexes. The crystal structure of the complexes reveals that the oxime LH reacts with [PdCl₂(CH₃CN)₂] presumably via the elimination of HCl from hydrazine NH. All the synthesized Pd(II) complexes were evaluated as catalysts in the Suzuki cross‐coupling reaction of aryl halides, activated 4‐bromoacetophenone and non‐activated bromobenzene, with phenylboronic acid in aqueous medium. In both cases, i.e. with activated and non‐activated aryl halides, all the complexes show moderate conversion leading to biaryls with yields in the range 50–65%. Copyright © 2016 John Wiley & Sons, Ltd.     

Nitro group reduction and Suzuki reaction catalysed by palladium supported on magnetic nanoparticles modified with carbon quantum dots generated from glycerol and urea

Glycerol and urea were used as green and cheap sources of carbon quantum dots (CQD) for modifying Fe₃O₄ nanoparticles (NPs). The obtained CQD@Fe₃O₄ NPs were used for the stabilization of palladium species and the prepared catalyst, Pd@CQD@Fe₃O₄, was characterized using various techniques. This magnetic supported palladium was applied as an efficient catalyst for the reduction of aromatic nitro compounds to primary amines at room temperature using very low palladium loading (0.008 mol%) and also for the Suzuki–Miyaura cross‐coupling reaction of aryl halides as well as challenging heteroaryl bromides and aryl diazonium salts with arylboronic acids and with potassium phenyltrifluoroborate. This magnetically recyclable catalyst was recovered and reused for seven consecutive runs in the reduction of 4‐nitrotoluene to p‐toluidine and for ten consecutive runs in the reaction of 4‐iodoanisole with phenylboronic acid with small decrease of activity. The catalyst reused in the Suzuki reaction was characterized using transmission electron microscopy, vibrating sample magnetometry and X‐ray photoelectron spectroscopy. Using experiments such as hot filtration and poisoning tests, it has been shown that the true catalyst works under homogeneous conditions according to the release–return pathway of active palladium species.     

Enantiopure Trioxadecalin Derived Liquid Crystals: Influence of the Nature of the Phenyl Substituent on the Mesogenic Properties

Reaction of pseudo‐glucal 1 with Grignard reagents derived from 1‐bromo‐4‐(trimethylsilyloxy)benzene, 1‐bromo‐4‐methoxybenzene, 1‐bromo‐4‐methoxymethoxybenzene, 1‐bromo‐4‐dimethylaminobenzene, in the presence of a catalytic amount of NiCl₂(dppe), gives the corresponding unsaturated β‐C‐aryl glycosides 2. Desilylation and hydrogenation of 2 leads to β‐C‐aryl glycosides 4, which can be used as chiral precursor compounds in the synthesis of chiral liquid crystals. Combination of 4 with arylaldehydes leads to compounds 5–7, whereas reaction with p‐alkoxysubstituted phenylboronic acids gives the trioxaboradecalins 8–11. The mesogenic properties of these compounds are strongly influenced by the nature of the substituent on the phenyl ring in the molecule.     

Pd‐SBT@MCM‐41: As an efficient,stable and recyclable organometallic catalyst for C‐C coupling reactions and synthesis of 5‐substituted tetrazoles

A palladium S‐benzylisothiourea complex was anchored on functionalized MCM‐41 (Pd‐SBT@MCM‐41) and applied as efficient and reusable catalyst for the synthesis of 5‐substituted 1H –tetrazoles using [2 + 3] cycloaddition reaction of various organic nitriles with sodium azide (NaN₃) in poly(ethylene glycol) (PEG) as green solvent. Also this catalyst was applied as an versatile organometallic catalyst for Suzuki cross‐coupling reaction of aryl halides and phenylboronic acid (PhB(OH)₂) or sodium tetraphenyl borate (NaB(Ph)₄). This nanocatalyst was characterized by thermal gravimetric analysis (TGA), X‐ray Diffraction (XRD), scanning electron microscopy (SEM), inductively Coupled Plasma (ICP) and N₂ adsorption–desorption isotherms techniques. Recovery of the catalyst is easily achieved by centrifugation for several consecutive runs.     

Palladium nanoparticles immobilized on EDTA‐modified Fe3O4@SiO2 nanospheres as an efficient and magnetically separable catalyst for Suzuki and Sonogashira cross‐coupling reactions

In this study, a novel heterogeneous palladium catalyst was synthesized by anchoring palladium onto ethylenediaminetetraacetic acid (EDTA)‐coated Fe₃O₄@SiO₂ magnetic nanocomposite and used for the Suzuki and Sonogashira cross‐coupling reactions. The properties of the magnetic catalyst were characterized by FT‐IR, XRD, TEM, FE‐SEM, DLS EDX, XPS, N₂ adsorption‐desorption isotherm analysis, TGA, VSM, elemental analysis and the loading level of Pd in catalyst was measured to be 0.51 mmol/g by ICP. The catalyst was used in Suzuki cross‐coupling reactions of various aryl halides, including less reactive chlorobenzenes with phenylboronic acid without any additive or ligand under green conditions. Furthermore, we have reported this recyclable catalytic system for Sonogashira cross‐coupling reactions of various aryl halides (I, Br, Cl) under copper and ligand‐free conditions in the presence of DMF/H₂O (1:2/v:v) as a solvent. The magnetic catalyst could also be separated by an external magnet and reused six times without any significant loss of activity.     

2‐Aryl‐4‐azido‐3‐(bromo/iodo)quinolines as substrates for the synthesis of primary 4‐amino‐2,3‐disubstituted quinoline derivatives

Staudinger reaction of the 2‐aryl‐4‐azido‐3‐bromoquinolines and 2‐aryl‐4‐azido‐3‐iodoquinolines with triphenyl phosphine in refluxing tetrahydrofuran afforded series of 2‐aryl‐3‐halogeno‐4‐(triphenylphosphoranylideneamino)quinolines. The latter were, in turn, hydrolyzed to the corresponding primary 4‐amino‐2‐aryl‐3‐(bromo/iodo)quinolines using 80% acetic acid under reflux. Tetrakis(triphenylphosphine)‐palladium(O)‐catalyzed Suzuki reaction of the 2‐aryl‐3‐iodo‐4‐(triphenylphosphoranylideneamino)‐quinolines with phenylboronic acid in dimethyl formamide in the presence of 2 M K₂CO₃ followed by hydrolysis of the incipient 2,3‐diaryl‐4‐(triphenylphosphoranylideneamino)quinolines with 80% acetic acid afforded the 4‐amino‐2,3‐diarylquinolines.     

Cavity‐Shaped Ligands: Calix[4]arene‐Based Monophosphanes for Fast Suzuki–Miyaura Cross‐Coupling

Five conical calix[4]arenes that have a PPh₂ group as the sole functional group anchored at their upper rim were assessed in palladium‐catalysed cross‐coupling reactions of phenylboronic acid with aryl halides (dioxane, 100 °C, NaH). With arylbromides, remarkably high activities were obtained with the catalytic systems remaining stable for several days. The performance of the ligands is comparable to a Buchwald‐type triarylphosphane, namely, (2′‐methyl[1,1′‐biphenyl]‐2‐yl)diphenylphosphane, which in contrast to the calixarenyl phosphanes tested may display chelating behaviour in solution. With the fastest ligand, 5‐diphenylphosphanyl‐25,26,27,28‐tetra(p‐methoxy)benzyloxy‐calix[4]arene ( 8 ), the reaction turnover frequency for the arylation of 4‐bromotoluene was 321 000 versus 214 000 mol(ArBr).mol(Pd)^?1. h^?1 for the reference ligand. The calixarene ligands were also efficient in Suzuki cross‐coupling reactions with aryl chlorides. Thus, by using 1 mol % of [Pd(OAc)₂] associated with one of the phosphanes, full conversion of the deactivated arenes 4‐chloroanisole and 4‐chlorotoluene was observed after 16 h. The high performance of the calixarenyl–phosphanes in Suzuki–Miyaura coupling of aryl bromides possibly relies on their ability to stabilise a monoligand [Pd⁰L(ArBr)] species through supramolecular binding of the Pd‐bound arene inside the calixarene cavity.     

Suzuki-Miyaura cross-coupling reaction of aryl bromides and chlorides with phenylboronic acid under aerobic conditions catalyzed by palladium complexes with thiosemicarbazone ligands

For the first time, palladium complexes with salicylaldehyde thiosemicarbazones were applied as catalyst precursors to the Suzuki-Miyaura reaction. These air and moisture stable phosphine-free systems efficiently catalyze the cross-coupling of aryl bromides and chlorides (from electron rich to electron poor) with phenylboronic acid in DMF/H₂O at 100 °C for 24 h, using Na₂CO₃ as base, without addition of free ligand or any promoting additive, and under aerobic conditions no significant homocoupling of phenylboronic acid to unsubstituted biphenyl was observed.