Application to Photocatalytic H2 Production of a Whole‐Cell Reaction by Recombinant Escherichia coli Cells Expressing [FeFe]‐Hydrogenase and Maturases Genes

A photocatalytic H₂ production system using an inorganic–bio hybrid photocatalyst could contribute to the efficient utilization of solar energy, but would require the development of a new approach for preparing a H₂‐forming biocatalyst. In the present study, we constructed a recombinant strain of Escherichia coli expressing the genes encoding the [FeFe]‐hydrogenase and relevant maturases from Clostridium acetobutylicum NBRC 13948 for use as a biocatalyst. We investigated the direct application of a whole‐cell of the recombinant E. coli. The combination of TiO₂, methylviologen, and the recombinant E. coli formed H₂ under light irradiation, demonstrating that whole cells of the recombinant E. coli could be employed for photocatalytic H₂ production without any time‐consuming and costly manipulations (for example, enzyme purification). This is the first report of the direct application of a whole‐cell reaction of recombinant E. coli to photocatalytic H₂ production.     

TDDFT modeling of the CO‐photolysis of Fe2(S2C3H6)(CO)6, a model of the [FeFe]‐hydrogenase catalytic site

Upon irradiation with ultraviolet wavelengths, Fe₂(S₂C₃H₆)(CO)₆, a simple model of the [FeFe]‐hydrogenase active site, undergoes CO dissociation to form the unsaturated Fe₂(S₂C₃H₆)(CO)₅ species and successively a solvent adduct at the vacant coordination site. In the present work, the CO‐photolysis of Fe₂(S₂C₃H₆)(CO)₆ was investigated by density functional theory (DFT) and time‐dependent DFT (TDDFT). Trans Fe₂(S₂C₃H₆)(CO)₅ form and the corresponding trans heptane or acetonitrile solvent adducts are the lowest energy ground state forms. CO dissociation barriers computed for the lowest triplet state are roughly halved with respect to those for the ground state suggesting that some low‐lying excited potential energy surface (PES) could be loosely bound with respect to Fe? C bond cleavage. The TDDFT excited state PESs and geometry optimizations for the excited states likely involved in the CO‐photolysis suggest that the Fe? S bond elongation and the partial isomerization toward the rotated form could take place simultaneously, favoring the trans CO photodissociation. © 2014 Wiley Periodicals, Inc.     

In Vivo EPR Characterization of Semi‐Synthetic [FeFe] Hydrogenases

EPR spectroscopy reveals the formation of two different semi‐synthetic hydrogenases in vivo. [FeFe] hydrogenases are metalloenzymes that catalyze the interconversion of molecular hydrogen and protons. The reaction is catalyzed by the H‐cluster, consisting of a canonical iron–sulfur cluster and an organometallic [2Fe] subsite. It was recently shown that the enzyme can be reconstituted with synthetic cofactors mimicking the composition of the [2Fe] subsite, resulting in semi‐synthetic hydrogenases. Herein, we employ EPR spectroscopy to monitor the formation of two such semi‐synthetic enzymes in whole cells. The study provides the first spectroscopic characterization of semi‐synthetic hydrogenases in vivo, and the observation of two different oxidized states of the H‐cluster under intracellular conditions. Moreover, these findings underscore how synthetic chemistry can be a powerful tool for manipulation and examination of the hydrogenase enzyme under in vivo conditions.     

Aerobic Damage to [FeFe]‐Hydrogenases: Activation Barriers for the Chemical Attachment of O2

[FeFe]‐hydrogenases are the best natural hydrogen‐producing enzymes but their biotechnological exploitation is hampered by their extreme oxygen sensitivity. The free energy profile for the chemical attachment of O₂ to the enzyme active site was investigated by using a range‐separated density functional re‐parametrized to reproduce high‐level ab initio data. An activation free‐energy barrier of 13 kcal mol^?1 was obtained for chemical bond formation between the di‐iron active site and O₂, a value in good agreement with experimental inactivation rates. The oxygen binding can be viewed as an inner‐sphere electron‐transfer process that is strongly influenced by Coulombic interactions with the proximal cubane cluster and the protein environment. The implications of these results for future mutation studies with the aim of increasing the oxygen tolerance of this enzyme are discussed.     

Muonium Chemistry at Diiron Subsite Analogues of [FeFe]‐Hydrogenase

The chemistry of metal hydrides is implicated in a range of catalytic processes at metal centers. Gaining insight into the formation of such sites by protonation and/or electronation is therefore of significant value in fully exploiting the potential of such systems. Here, we show that the muonium radical (Mu^.), used as a low isotopic mass analogue of hydrogen, can be exploited to probe the early stages of hydride formation at metal centers. Mu^. undergoes the same chemical reactions as H^. and can be directly observed due to its short lifetime (in the microseconds) and unique breakdown signature. By implanting Mu^. into three models of the [FeFe]‐hydrogenase active site we have been able to detect key muoniated intermediates of direct relevance to the hydride chemistry of these systems.     

Redox‐Polymer‐Based High‐Current‐Density Gas‐Diffusion H2‐Oxidation Bioanode Using [FeFe] Hydrogenase from Desulfovibrio desulfuricans in a Membrane‐free Biofuel Cell

The incorporation of highly active but also highly sensitive catalysts (e.g. the [FeFe] hydrogenase from Desulfovibrio desulfuricans) in biofuel cells is still one of the major challenges in sustainable energy conversion. We report the fabrication of a dual‐gas diffusion electrode H₂/O₂ biofuel cell equipped with a [FeFe] hydrogenase/redox polymer‐based high‐current‐density H₂‐oxidation bioanode. The bioanodes show benchmark current densities of around 14 mA cm^?2 and the corresponding fuel cell tests exhibit a benchmark for a hydrogenase/redox polymer‐based biofuel cell with outstanding power densities of 5.4 mW cm^?2 at 0.7 V cell voltage. Furthermore, the highly sensitive [FeFe] hydrogenase is protected against oxygen damage by the redox polymer and can function under 5 % O₂.     

A Reversible Proton Relay Process Mediated by Hydrogen‐Bonding Interactions in [FeFe]Hydrogenase Modeling

A reversible and temperature‐dependent proton‐relay process is demonstrated for a Fe₂ complex possessing a terminal thiolate in the presence of nitrogen‐based acids. The terminal sulfur site (S^t) of the complex forms a hydrogen‐bond interaction with N,N‐dimethylanilinium acid at 183 K. The Fe₂ core, instead, is protonated to generate a bridging hydride at 298 K. Reversibility is observed for the tautomerization between the hydrogen‐bonded pair and the Fe–hydride species. X‐ray structural analysis of the hydrogen‐bonded species at 193 K reveals a short N(H)???S^t contact. Employment of pyridinium acid also results in similar behavior, with reversible proton–hydride interconversion. DFT investigation of the proton‐transfer pathways indicates that the pK_a value of the hydrogen‐bonded species is enhanced by 3.2 pK_a units when the temperature is decreased from 298 K to 183 K.     

Photocatalytic hydrogen evolution by two comparable [FeFe]‐hydrogenase mimics assembled to the surface of ZnS

Two photocatalytic hydrogen evolution systems were constructed by assembling [FeFe]‐hydrogenase mimics, either carboxyl group‐containing ( C1 ) or not ( C2 ), on to the surface of ZnS using triethanolamine as electron donor in DMF‐H₂O (9/1, v/v) solution. Upon irradiation for 30 h, the turnover numbers of hydrogen evolution were 3400 and 4950 for the hybrid system C1 /ZnS and C2 /ZnS, respectively. The photocatalytic activity of the C2 /ZnS system was five times higher than the activity of the pristine ZnS, suggesting that the [FeFe]‐hydrogenase mimics are crucial toward improving the activity of ZnS. On the basis of the spectroscopic studies and analyses, the photogenerated electron transfer from ZnS to the mimics is probably responsible for the activity enhancement of ZnS. The time dependence of hydrogen generation shows that the mimic C2 is more active than C1 . The different hydrogen evolution activity can be attributed to the different adsorption modes of the two [FeFe]‐hydrogenase mimics on the surface of ZnS. Copyright © 2014 John Wiley & Sons, Ltd.     

Using polyethyleneimine (PEI) as a scaffold to construct mimicking systems of [FeFe]‐hydrogenase: preparation,characterization of PEI‐based materials,and their catalysis on proton reduction

Ten branched polymeric materials (PEI‐P‐Fe₂s) derived from polyethyleneimine (PEI) functionalized with [Fe₂(CO)₅]‐units to mimic [FeFe]‐hydrogenase were prepared. Before the functionalization, PEI was first premodified using diphenylphosphinamine (NPPh₂) group. In the premodification, three approaches were employed: (i) using PEI with an average molecular weight of 1800 and 600, respectively; (ii) grafting NPPh₂ group by either direct reaction of chlorodiphenylphosphine with PEI or Br(CH₂)₁₁OPPh₂; and (iii) further premodification with BrCH₂COOH after immobilization of the NPPh₂ group. Reaction of the premodified PEI with diiron hexacarbonyl complexes, [Fe₂(μ‐S)₂(CO)₆] (1), or [Fe₂(μ‐S₂C₂H₄)(CO)₆] (3) produced 10 functionalized materials, PEI‐P‐Fe₂s. These materials were characterized using a variety of spectroscopic techniques, FTIR, NMR, TGA, and cyclic voltammetry. Spectral comparison with two control complexes, [Fe₂(μ‐S)₂(CO)₅PPh₃] (2) and [Fe₂(μ‐S₂C₂H₄)(CO)₅PPh₃] (4), suggested that the immobilized diiron units of PEI‐P‐Fe₂s were dominantly pentacarbonyl analogous to complexes 2 and 4, although tetracarbonyl units may also exist because the amine groups of PEI could also be involved in substituting CO, as was the NPPh₂ group. The catalysis of these materials on proton reduction was examined in 0.1 mol l^?1 [NBut₄]BF₄/DMF containing acetic acid by using cyclic voltammetry. Our results indicated that both the presence of carboxylic acid and dangling the diiron units at the end of a long aliphatic chain improved catalytic efficiency by one‐fold. The improvement was attributed to the increase in flexibility of the catalytic center and enhancement of proton transfer during the catalysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Nanomagnetically modified thioglycolic acid (γ‐Fe2O3@SiO2‐SCH2CO2H): Efficient and reusable green catalyst for the one‐pot domino synthesis of spiro[benzo[a]benzo[6,7]chromeno[2,3‐c]phenazine] and benzo[a]benzo[6,7]chromeno[2,3‐c]phenazines

Superparamagnetic nanoparticles of modified thioglycolic acid (γ‐Fe₂O₃@SiO₂‐SCH₂CO₂H) represent a new, efficient and green catalyst for the one‐pot synthesis of novel spiro[benzo[a ]benzo[6,7]chromeno[2,3‐c ]phenazine] derivatives via domino Knoevenagel–Michael–cyclization reaction of 2‐hydroxynaphthalene‐1,4‐dione, benzene‐1,2‐diamines, ninhydrin and isatin. This novel magnetic organocatalyst was easily isolated from the reaction mixture by magnetic decantation using an external magnet and reused at least six times without significant loss in its activity. The catalyst was fully characterized using various techniques. This procedure was also applied successfully for the synthesis of benzo[a ]benzo[6,7]chromeno[2,3‐c ]phenazines.     

One‐pot Combinatorial Synthesis of Benzo[4,5]imidazo‐[1,2‐a]thiopyrano[3,4‐d]pyrimidin‐4(3H)‐one Derivatives

A series of novel fused tetracyclic benzo[4,5]imidazo[1,2‐a]thiopyrano[3,4‐d]pyrimidin‐4(3H)‐one derivatives were synthesized via the reaction of aryl aldehyde, 2H‐thiopyran‐3,5(4H,6H)‐dione, and 1H‐benzo[d]imidazol‐2‐amine in glacial acetic acid. This protocol features mild reaction conditions, high yields and short reaction time.     

An Alternating Copolymer Derived from Indolo[3,2‐b]carbazole and 4,7‐Di(thieno[3,2‐b]thien‐2‐yl)‐2,1,3‐benzothiadiazole for Photovoltaic Cells

An alternating narrow bandgap conjugated copolymer (PICZ‐DTBT, E_g = 1.83 eV) derived from 5,11‐di(9‐heptadecanyl)indolo[3,2‐b]carbazole and 4,7‐di(thieno[3,2‐b]thien‐2‐yl)‐2,1,3‐benzothiadiazole (DTBT), was prepared by the palladium‐catalyzed Suzuki coupling reaction. The resultant polymer absorbs light from 350–690 nm, exhibits two absorbance peaks at around 420 and 570 nm and has good solution processibility and thermal stability. The highest occupied molecular orbital (HOMO) energy level and lowest unoccupied molecular orbital (LUMO) level of the copolymer determined by cyclic voltammetry were about −5.18 and −3.35 eV, respectively. Prototype bulk heterojunction photovoltaic cells from solid‐state composite films based on PICZ‐DTBT and [6,6]‐phenyl‐C₇₁ butyric acid methyl ester (PC₇₁BM), show power conversion efficiencies up to 2.4% under 80 mW · cm⁻² illumination (AM1.5) with an open‐circuit voltage of V_oc = 0.75 V, a short current density of J_sc = 6.02 mA · cm⁻², and a fill factor of 42%. This indicates that the copolymer PICZ‐DTBT is a viable electron donor material for polymeric solar cells.

     

A New Four‐Component Reaction for the Synthesis of Spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles]

A new four‐component synthesis of spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles] and spiro[acenaphthylene‐1(2H),4′‐[4H‐indeno[1,2‐b]pyridines] by the reaction of indane‐1,3‐dione, 1,3‐dicarbonyl compounds, isatins (=1H‐indole‐2,3‐diones) or acenaphthylene‐1,2‐dione, and AcONH₄ in refluxing toluene in the presence of a catalytic amount of pyridine is reported.     

Terminal Hydride Species in [FeFe]‐Hydrogenases Are Vibrationally Coupled to the Active Site Environment

A combination of nuclear resonance vibrational spectroscopy (NRVS), FTIR spectroscopy, and DFT calculations was used to observe and characterize Fe?H/D bending modes in CrHydA1 [FeFe]‐hydrogenase Cys‐to‐Ser variant C169S. Mutagenesis of cysteine to serine at position 169 changes the functional group adjacent to the H‐cluster from a ‐SH to ‐OH, thus altering the proton transfer pathway. The catalytic activity of C169S is significantly reduced compared to that of native CrHydA1, presumably owing to less efficient proton transfer to the H‐cluster. This mutation enabled effective capture of a hydride/deuteride intermediate and facilitated direct detection of the Fe?H/D normal modes. We observed a significant shift to higher frequency in an Fe?H bending mode of the C169S variant, as compared to previous findings with reconstituted native and oxadithiolate (ODT)‐substituted CrHydA1. On the basis of DFT calculations, we propose that this shift is caused by the stronger interaction of the ‐OH group of C169S with the bridgehead ‐NH‐ moiety of the active site, as compared to that of the ‐SH group of C169 in the native enzyme.     

Tetradecacobalt(II)‐Containing 36‐Niobate [Co14(OH)16(H2O)8Nb36O106]20− and Its Photocatalytic H2 Evolution Activity

A gigantic Co₁₄‐containing 36‐niobate, Na₁₂K₈[Co₁₄(OH)₁₆(H₂O)₈Nb₃₆O₁₀₆] ? 71H₂O ( 1 ), has been prepared by the hydrothermal method and structurally characterized. Polyanion [Co₁₄(OH)₁₆(H₂O)₈Nb₃₆O₁₀₆]^20? ( 1 a ) comprises a central Co₇ core, surrounded by another seven isolated Co²⁺ ions and six Lindqvist‐type (Nb₆O₁₉) hexaniobate fragments. This is the first example of a high‐nuclear cobalt‐cluster‐containing polyoxoniobate. The photocatalytic H₂ evolution activity of Pt‐loaded 1 was observed in methanol solution under irradiation using a 300 W Xe lamp.     

Cu(II)‐supported graphene quantum dots modified NiFe2O4: A green and efficient catalyst for the synthesis of 4H‐pyrimido[2,1‐b]benzothiazoles in water

NiFe₂O₄ nanoparticles are modified by graphene quantum dots (GQDs) and utilized to stabilize the Cu(II) nanoparticles as a novel magnetically retrievable catalytic system (Cu(II)/GQDs/NiFe₂O₄) for green formation of 4H‐pyrimido[2,1‐b]benzothiazoles. The prepared catalyst can be isolated assisted by an outer magnet and recovered for five courses without significant reduction in its efficiency. The as‐prepared magnetic heterogeneous nanocomposite was characterized by UV–Vis, FT‐IR, XRD, EDS, VSM, TEM, and ICP. Performing the reactions in environmentally friendly and affordable conditions (water), the low catalyst percentage, high yield of products, short reaction times, and easy workup are the merits of this protocol.     

Self‐Assembly in Water of Poly(acrylic acid)‐Based Diblock Copolymers Synthesized by Nitroxide‐Mediated Polymerization

Summary: Amphiphilic diblock copolymers consisting of a hydrophilic block, poly(acrylic acid), and a hydrophobic block, polystyrene, were synthesized by direct nitroxide‐mediated polymerization using the PS block as a macro‐initiator for the first time. Several techniques were used to characterize the amphiphilic block copolymers (size exclusion chromatography, NMR spectroscopy). The proposed method can lead to samples with a broad range of composition and molar mass. Preliminary studies of their self‐assembly in aqueous medium using fluorescence spectroscopy and small‐angle neutron scattering are presented.

Schematic of the formation of the PS‐b‐PAA block copolymers and their micellization in aqueous media.     

Tetrakis(bicyclo[2.2.2]oct‐2‐ene)‐Fused Calix[4]pyrrole

Tetrakis(bicyclo[2.2.2]oct‐2‐ene)‐fused calix[4]pyrrole, 5 , was obtained starting from (E)‐1,2‐bis(phenylsulfonyl)ethylene. This new calixpyrrole derivative is the prospective precursor of tetrabenzocalix[4]pyrrole, a potential ion‐pair receptor and an attractive species as a possible deep‐walled ‘molecular container’.