Elucidation of π‐Conjugation Modes in Diarene‐Fused 1,2‐Dihydro‐1,2‐diborin Dianions

A series of diarene‐fused 1,2‐dihydro‐1,2‐diborins were prepared as a new B? B‐bond‐embedded polycyclic π‐electron system. The reduction of these compounds with metals produced their corresponding dianions, the π‐conjugation modes of which varied from 6π‐conjugation within the central 1,2‐diborin skeleton to 14π peripheral conjugation over the tricyclic skeleton, depending on the nature of the reduced biaryl framework. Moreover, the countercation to the dianions had a significant effect on the absorption spectra, with a dramatic color change from yellow to deep blue, depending on the distance between the tricyclic dianion skeleton and the countercation.     

Thiophene‐Based,Radial π‐Conjugation: Synthesis,Structure, and Photophysical Properties of Cyclo‐1,4‐phenylene‐2′,5′‐thienylenes

The synthesis of cyclo‐1,4‐phenylene‐2′,5′‐thienylenes (CPTs) as the first example of a thiophene‐based, radially π‐conjugated system is described. X‐ray crystal structures, UV‐vis absorption and emission spectra, and theoretical studies revealed the unique structural and photophysical properties of CPTs. With all of these unique structural and photophysical properties, the radially π‐conjugated CPTs are expected to open a door for the discovery and development of new functional organic materials.     

FeCl3‐Mediated Oxidative Spirocyclization of Difluorenylidene Diarylethanes Leading to Dispiro[fluorene‐9,5′‐indeno[2,1‐a]indene‐10′,9′′‐fluorene]s

A novel FeCl₃‐mediated oxidative spirocyclization for construction of a new class of di‐spirolinked π‐conjugated molecules, dispiro[fluorene‐9,5′‐indeno[2,1‐a]indene‐10′,9′′‐fluorene]s (DSFIIFs), has been reported. The combination of FeCl₃ with FeO(OH) triggered an unprecedented double one‐electron oxidation of difluorenylidene diarylethanes to afford the corresponding dispirocycles in high yields. The highest fluorescence quantum yield was up to 0.94 in solution. This protocol is also applicable to the synthesis of the non‐spirolinked dihydroindenoindenes.     

Synthesis of 7,8‐Dehydropurpurin Dimers and Their Conversion into Conformationally Constrained β‐to‐β Vinylene‐Bridged Porphyrin Dimers

7,8‐Dehydropurpurin has attracted much attention owing to the dual 18π‐ and 20π‐electron circuits in its macrocyclic conjugation. The two‐fold Pd‐catalyzed [3+2] annulation of meso‐bromoporphyrin with 1,4‐diphenylbutadiyne furnished 7,8‐dehydropurpurin dimers. The 8^a,8^a‐linked dimer displays a red‐shifted and enhanced absorption band in the NIR region and a small electrochemical HOMO–LUMO band gap as a consequence of efficient conjugation between the two coplanar 7,8‐dehydropurpurin units. Treatment of this dimer with N‐bromosuccinimide in chloroform and ethanol gave β‐to‐β vinylene‐bridged porphyrin dimers. Owing to the highly constrained conformations, these dimers exhibit perturbed absorption spectra, small Stokes shifts, and high fluorescence quantum yields.     

Functional carbo‐Butadienes: Nonaromatic Conjugation Effects through a 14‐Carbon, 24‐π‐Electron Backbone

A systematic study of carbo‐butadiene motifs not embedded in an aromatic carbo‐benzene ring is described. Dibutatrienylacetylene (DBA) targets R¹?C(R)?C?C?C(Ph)?C≡C?C(Ph)?C?C?C(R)?R² are devised, in which R is C≡CSiiPr₃ and R¹ and R² are R, H, or 4‐X‐C₆H₄, with the latter including three known representatives (X: H, NMe₂, or NH₂). The synthesis method is based on the SnCl₂‐mediated reduction of pentaynediols prepared by early or late divergent strategies; the latter allows access to a OMe–NO₂ push–pull diaryl‐DBA. If R¹ and R² are H, an over‐reduced dialkynylbutatriene (DAB) with two allenyl caps was isolated instead of the unsubstituted DBA. If R¹=R²=R, the tetraalkynyl‐DBA target was obtained, along with an over‐reduced DBA product with a 12‐membered 1,2‐alkylidene‐1H₂,2H₂‐carbo‐cyclobutadiene ring. X‐ray crystallography shows that all of the acyclic DBAs adopt a planar trans–transoid–trans configuration. The maximum UV/Vis absorption wavelength is found to vary consistently with the overall π‐conjugation extent and, more intriguingly, with the π‐donor character of the aryl X substituents, which varies consistently with the first (reversible) reduction potential and first (irreversible) oxidation peak, as determined by voltammetry.     

3,4‐Dithiaphosphole and 3,3′,4,4′‐Tetrathia‐1,1′‐Biphosphole π‐Conjugated Systems: S Makes the Impact

Conjugated systems based on phospholes and 1,1′‐biphospholes bearing 3,4‐ethylenedithia bridges have been prepared using the Fagan–Nugent route. The mechanism of this organometallic route leading to intermediate zirconacyclopentadienes has been investigated by using theoretical calculations. This study revealed that the oxidative coupling leading to zirconacyclopentadienes is favored over oxidative addition within the S? C≡C bond both thermodynamically and kinetically. The impact of the presence of the S atoms on the optical and electrochemical behavior of the phospholes and 1,1′‐biphospholes has been systematically evaluated both experimentally and theoretically. A comparison with their “all‐carbon” analogues is provided. Of particular interest, this comparative study revealed that the introduction of S atoms has an impact on the electronic properties of phosphole‐based conjugated systems. A decrease of the HOMO–LUMO separation and a stabilization of the LUMO level were observed. These general trends are also observed with 1,1′‐biphospholes exhibiting σ–π conjugation. The P atom of the 3,4‐ethylenedithiaphospholes can be selectively oxidized by S₈ or O₂. These P modifications result in a lowering of the HOMO–LUMO separation as well as an increase of the reduction and oxidation potentials. The S atoms of the 3,4‐ethylenedithia bridge of the 2,5‐phosphole have been oxidized using m‐chloroperoxybenzoic acid. The resulting 3,4‐ethylenesulfoxide oxophosphole was characterized by an X‐ray diffraction study. Experimental and theoretical studies show that this novel chemical manipulation results in an increase of the HOMO–LUMO separation and an important decrease of the LUMO level. The electropolymerization of 2‐thienyl‐capped 3,4‐ethylenedithiathioxophosphole and 1,1′‐biphosphole is reported. The impact of the S substituents on the polymer properties is discussed.     

Facile Synthesis and Palladium‐Catalyzed Cross‐Coupling Reactions of 2,3‐Bis(pinacolatoboryl)‐1,3‐butadiene

Treatment of 1,1‐bis(pinacolatoboryl)ethene with an excess of 1‐bromo‐1‐lithioethene gave 2,3‐bis(pinacolatoboryl)‐1,3‐butadiene in high yield. Palladium‐catalyzed cross‐coupling of the resulting diborylbutadiene with aryl iodides took place smoothly in the presence of a catalytic amount of Pd(OAc)₂/PPh₃ and aqueous KOH to give 2,3‐diaryl‐1,3‐butadienes in good yields. The coupling reaction with commercially available 4‐acetoxyphenylmethyl chloride under the same conditions followed by hydrolysis of the acetyl groups gave anolignan B in a one‐pot manner. A variety of [3]‐ to [6]dendralenes were synthesized by palladium‐catalyzed coupling of the diene or 1,1‐bis(pinacolato)borylethene with alkenyl or dienyl halides, respectively, in good yields.     

Oligo(p‐phenylene‐ethynylene)‐Derived Super‐π‐Gelators with Tunable Emission and Self‐Assembled Polymorphic Structures

Linear π‐conjugated oligomers are known to form organogels through noncovalent interactions. Herein, we report the effect of π‐repeat units on the gelation and morphological properties of three different oligo(p‐phenylene‐ethynylene)s: OPE3 , OPE5 , and OPE7 . All of these molecules form fluorescent gels in nonpolar solvents at low critical gel concentrations, thereby resulting in a blue gel for OPE3 , a green gel for OPE5 , and a greenish yellow gel for OPE7 . The molecule–molecule and molecule–substrate interactions in these OPEs are strongly influenced by the conjugation length of the molecules. Silicon wafer suppresses substrate–molecule interactions whereas a mica surface facilitates such interactions. At lower concentrations, OPE3 formed vesicular assemblies and OPE5 gave entangled fibers, whereas OPE7 resulted in spiral assemblies on a mica surface. At higher concentrations, OPE3 and OPE5 resulted in super‐bundles of fibers and flowerlike short‐fiber agglomerates when different conditions were applied. The number of polymorphic structures increases on increasing the conjugation length, as seen in the case of OPE7 with n=5, which resulted in a variety of exotic structures, the formation of which could be controlled by varying the substrate, concentration, and humidity.     

Dithiazolo[5,4‐b:4′,5′‐d]phosphole: A Highly Luminescent Electron‐Accepting Building Block

A family of highly emissive dithiazolo[5,4‐b:4′,5′‐d]phospholes has been designed and synthesized. The structures of two trivalent P species, as well as their corresponding P oxides, have been confirmed by X‐ray crystallography. The parent dithiazolo[5,4‐b:4′,5′‐d]phosphole oxide exhibits strong blue photoluminescence at λ_em=442 nm, with an excellent quantum yield efficiency of ?_PL=0.81. The photophysical properties of these compounds can be easily tuned by extension of the conjugation and modification of the phosphorus center. Compared with the established dithieno[3,2‐b:2′,3′‐d]phosphole system, the incorporation of electronegative nitrogen atoms leads to significantly lowered frontier orbital energy levels, as validated by both electrochemistry and theoretical calculations, thus suggesting that the dithiazolo[5,4‐b:4′,5′‐d]phospholes are valuable, air‐stable, n‐type conjugated materials. These new building blocks have been further applied to the construction of an extended oligomer with fluorene. Extension of the dithiazolophosphole core with triazole units through click reactions also provides a suitable N,N‐chelating moiety for metal binding and a representative molecular species was successfully used as a selective colorimetric and fluorescent sensor for Cu^II ions.     

Ligand‐Controlled Synthesis of [3]‐ and [4]Cyclo‐9,9‐dimethyl‐2,7‐fluorenes through Triangle‐ and Square‐Shaped Platinum Intermediates

The syntheses of [3]‐ and [4]cyclo‐9,9‐dimethyl‐2,7‐fluorenes ([3] and [4]CFRs), cyclic trimer, and tetramers of 9,9‐dimethyl‐2,7‐fluorene (FR), respectively, were achieved by the platinum‐mediated assembly of FR units and subsequent reductive elimination of platinum. A triangle‐shaped tris‐platinum complex and a square‐shaped tetra‐platinum complex were obtained by changing the platinum ligand. The structure of the triangle complex was unambiguously determined by X‐ray crystallographic analysis. Reductive elimination of each complex gave [3] and [4]CFRs. Two rotamers of [3]CFR were sufficiently stable at room temperature and were separated by chromatography. The physical properties of the CFRs were also investigated theoretically and experimentally.     

Suppressing charge recombination by incorporating 3,6‐carbazole into poly[9‐(heptadecan‐9‐yl)‐9H‐carbazole‐2,7‐diyl‐alt‐(5,6‐bis‐(octyloxy)‐4,7‐di(thiophen‐2‐yl)benzo[1,2,5]‐thiadiazole)‐5,5‐diyl]

A series of poly[9‐(heptadecan‐9‐yl)‐9H‐carbazole‐2,7‐diyl‐alt‐(5,6‐bis‐(octyloxy)‐4,7‐di(thiophen‐2‐yl)benzo‐[1,2,5]‐thia‐diazole)‐5,5‐diyl] compositions containing various ratios of 3,6‐carbazole was synthesized for testing in a polymer solar cell. An appropriate amount of 3,6‐carbazole units incorporated into the copolymer improved intermolecular charge transport, whereas excess amount of 3,6‐carbazole units temporarily seized on the partial negative charge generated in the conjugation breaks. We extensively studied the effects of the incorporated 3,6‐carbazole units on the intermolecular interactions, which can affect nongeminated recombination in bulk heterojunction‐polymer solar cells. These properties were investigated using photocurrent‐ and light intensity‐dependent measurements and electrochemical impedance spectroscopy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2047–2056     

Metal‐Catalyzed Annulation Reactions for π‐Conjugated Polycycles

The progress of the metal‐catalyzed annulation reactions toward construction of various π‐conjugated polycyclic cores with high conjugation extension is described. This article gives a brief overview of various annulation reactions promoted by metal catalysts including C?H bond functionalization, [2+2+2] cycloaddition, cascade processes, ring closing metathesis, electrophilic aromatization, and various cross‐coupling reactions. A variety of conjugated polycycles with planar, bowl‐shaped, and helical structures have been constructed in high efficiency and selectivity.     

π‐Extended “Earring” Porphyrins with Multiple Cavities and Near‐Infrared Absorption

β,β‐tripyrrin‐bridged earring porphyrins were synthesized through Suzuki–Miyaura cross coupling reactions. These porphyrinoids have multiple cavities and can accommodate two or three metal ions per molecule. The structures of the porphyrins have been elucidated by x‐ray diffraction analysis, and feature curved π planes. The electronic spectra of the porphyrins exhibit near‐infrared (NIR) absorptions and metal insertion leads to red‐shifted and intensified absorption features. Electrochemical analysis and transient absorption measurements indicated that the porphyrins exhibit effective electronic communication between their central and peripheral moieties.     

π‐Extended Indenofluorenes

A series of π‐extended aromatic indenofluorene (IF) analogues with naphthalene and anthracene cores have been synthesized through acid‐catalyzed intramolecular cyclization. The regioselectivity of the reaction is controlled by a combination of steric and electronic factors and in some cases several possible regioisomers have resulted from the same precursor. The effects of ring connectivity on the optoelectronic properties were investigated by DFT calculations, absorption/emission spectroscopy, cyclic voltammetry, and spectroelectrochemical studies. All regioisomers exhibited a redshift of their absorption/emission bands relative to the parent IF analogues, but the magnitude of this shift and other optoelectronic properties (luminescence quantum yield, etc.) depends on the ring connectivity in a less obvious manner.     

N‐Confused Phlorin‐Prodigiosin Chimera: meso‐Aryl Oxidation and π‐Extension Triggered by Peripheral Coordination

An N‐confused phlorin isomer bearing a dipyrrin moiety at the α‐position of the confused pyrrole ring ( 1 ) was synthesized. Pd^II and B^III coordination at the peripheral prodigiosin‐like moiety of 1 afforded the corresponding complexes 2 and 3 . Reflux of 2 in triethylamine (TEA) converted the meso‐phenyl into the Pd^II‐coordinating phenoxy group to afford 4 . Under the same reaction conditions, TEA was linked to the α‐position of the dipyrrin unit in 3 as an N,N‐diethylaminovinyl group to afford 5 . Furthermore, peripheral coordination of B^III in 3 and 5 improved the planarity of the phlorin macrocycle and thus facilitated the coordination of Ag^III at the inner cavity to afford 3‐Ag and 5‐Ag , respectively. These results provide an effective approach for developing unique porphyrinoids through peripheral coordination.     

Enhanced Performance of Benzothieno[3,2‐b]thiophene (BTT)‐Based Bottom‐Contact Thin‐Film Transistors

Three new benzothieno[3,2‐b]thiophene ( BTT ; 1 ) derivatives, which were end‐functionalized with phenyl ( BTT‐P ; 2 ), benzothiophenyl ( BTT‐BT ; 3 ), and benzothieno[3,2‐b]thiophenyl groups ( BBTT ; 4 ; dimer of 1 ), were synthesized and characterized in organic thin‐film transistors (OTFTs). A new and improved synthetic method for BTT s was developed, which enabled the efficient realization of new BTT ‐based semiconductors. The crystal structure of BBTT was determined by single‐crystal X‐ray diffraction. Within this family, BBTT , which had the largest conjugation of the BTT derivatives in this study, exhibited the highest p‐channel characteristic, with a carrier mobility as high as 0.22 cm² V^?1 s^?1 and a current on/off ratio of 1×10⁷, as well as good ambient stability for bottom‐contact/bottom‐gate OTFT devices. The device characteristics were correlated with the film morphologies and microstructures of the corresponding compounds.     

Corannulene‐Fused Anion‐Responsive π‐Conjugated Molecules that Form Self‐Assemblies with Unique Electronic Properties

The fusion of bowl‐shaped π‐conjugated corannulene units to anion‐responsive π‐conjugated dipyrrolyldiketone‐boron complexes resulted in new molecular materials with a unique self‐assembly capability. The bowl‐fused receptor with aliphatic tails could form both supramolecular gels and mesophases through π‐stacking interactions and also exhibited anion‐responsive characteristics. The presence of the π‐bowl unit not only afforded enhanced self‐assembly capability both in solution and in the mesophases, as evidenced by gelation experiments and phase‐transition profiles, but also enhanced intrinsic charge‐carrier mobility.     

Dendrimeric Oligo(phenylenevinylene)‐Extended Dithieno[3,2‐b:2′,3′‐d]phospholes—Synthesis,Self‐Organization,and Optical Properties

A boost from the branches : Incorporation of the dithieno[3,2‐b:2′,3′‐d]phosphole system as a core in oligo(phenylenevinylene) dendrimers (an example is shown here) provides materials that exhibit energy‐transfer features relaying incoming photons from the dendrons towards the core, which in turn shows enhanced emission intensity. The optical properties and self‐assembly features of the dendrimers can be impacted by the terminal groups (‐H, ‐CF₃, or ‐NPh₂) employed.