Amphiphilic Janus Gold Nanoparticles Prepared by Interface‐Directed Self‐Assembly: Synthesis and Self‐Assembly

Materials with Janus structures are attractive for wide applications in materials science. Although extensive efforts in the synthesis of Janus particles have been reported, the synthesis of sub‐10 nm Janus nanoparticles is still challenging. Herein, the synthesis of Janus gold nanoparticles (AuNPs) based on interface‐directed self‐assembly is reported. Polystyrene (PS) colloidal particles with AuNPs on the surface were prepared by interface‐directed self‐assembly, and the colloidal particles were used as templates for the synthesis of Janus AuNPs. To prepare colloidal particles, thiol‐terminated polystyrene (PS‐SH) was dissolved in toluene and citrate‐stabilized AuNPs were dispersed in aqueous solution. Upon mixing the two solutions, PS‐SH chains were grafted to the surface of AuNPs and amphiphilic AuNPs were formed at the liquid–liquid interface. PS colloidal particles decorated with AuNPs on the surfaces were prepared by adding the emulsion to excess methanol. On the surface, AuNPs were partially embedded in the colloidal particles. The outer regions of the AuNPs were exposed to the solution and were functionalized through the grafting of atom‐transfer radical polymerization (ATRP) initiator. Poly[2‐(dimethamino)ethyl methacrylate] (PDMAEMA) on AuNPs were prepared by surface‐initiated ATRP. After centrifugation and dissolving the colloidal particles in tetrahydrofuran (THF), Janus AuNPs with PS and PDMAEMA on two hemispheres were obtained. In acidic pH, Janus AuNPs are amphiphilic and are able to emulsify oil droplets in water; in basic pH, the Janus AuNPs are hydrophobic. In mixtures of THF/methanol at a volume ratio of 1:5, the Janus AuNPs self‐assemble into bilayer structures with collapsed PS in the interiors and solvated PDMAEMA at the exteriors of the structures.     

Rapid Cationization of Gold Nanoparticles by Two‐Step Phase Transfer

Cationic gold nanoparticles offer intriguing opportunities as drug carriers and building blocks for self‐assembled systems. Despite major progress on gold nanoparticle research in general, the synthesis of cationic gold particles larger than 5 nm remains a major challenge, although these species would give a significantly larger plasmonic response compared to smaller cationic gold nanoparticles. Herein we present the first reported synthesis of cationic gold nanoparticles with tunable sizes between 8–20 nm, prepared by a rapid two‐step phase‐transfer protocol starting from simple citrate‐capped particles. These cationic particles form ordered self‐assembled structures with negatively charged biological components through electrostatic interactions.     

Thermally Reversible Self‐Assembly of Nanoparticles via Polymer Crystallization

The directed self‐assembly of gold nanoparticles through the crystallization of surface‐grafted polyethylene oxide (PEO) in ethanol–water mixtures is described. This process is fully reversible and tunable through either the size of the core or the polymeric coating. Characterization by X‐ray scattering and electron microscopy of the self‐assembled structures reveals order at the nanoscale, typically not the case for thermoresponsive gold nanoparticles coated with lower or upper critical solution temperature polymers. A further novelty is the result of selective binding of calcium ions to the PEO in the fluid state: a reversible thermoresponsive transition become irreversible.

     

Polyrotaxane‐Mediated Self‐Assembly of Gold Nanospheres into Fully Reversible Supercrystals

The use of a thiol‐functionalized nonionic surfactant to stabilize spherical gold nanoparticles in water induces the spontaneous formation of polyrotaxanes at the nanoparticle surface in the presence of the macrocycle α‐cyclodextrin. Whereas using an excess of surfactant an amorphous gold nanocomposite is obtained, under controlled drying conditions the self‐assembly between the surface supramolecules provides large and homogenous supercrystals with hexagonal close packing of nanoparticles. Once formed, the self‐assembled supercrystals can be fully redispersed in water. The reversibility of the crystallization process may offer an excellent reusable material to prepare gold nanoparticle inks and optical sensors with the potential to be recovered after use.     

Design and Synthesis of Novel Peptide Nucleic Acid Monomers

All of the four nucleobases in DNA have replaced the 4‐hydroxy group of N‐[2‐(tert‐butoxycarbonylaminomethyl)‐trans‐4‐hydroxy] tetrahydropyrrole acetic acid methyl ester with cis ‐stereochemistry. An efficient route for the synthesis of N‐[2‐(tert‐butoxycarbonylaminomethyl)‐trans‐4‐hydroxy]‐tetrahydropyrrole acetic acid methyl ester has been developed. Starting with this intermediate, the protected monomers were synthesized by the Mitsunobu reaction or via its tosylate.     

Reversible Self‐Assembly of Carboxylated Peptide‐Functionalized Gold Nanoparticles Driven by Metal‐Ion Coordination

Carboxylated peptide‐functionalized gold nanoparticles (peptide‐GNPs) self‐assemble into two‐ and three‐dimensional nanostructures in the presence of various heavy metal ions (i.e. Pb²⁺, Cd²⁺, Cu²⁺, and Zn²⁺) in aqueous solution. The assembly process is monitored by following the changes in the surface plasmon resonance (SPR) band of gold nanoparticles in a UV/Vis spectrophotometer, which shows the development of a new SPR band in the higher‐wavelength region. The extent of assembly is dependent on the amount of metal ions present in the medium and also the time of assembly. TEM analysis clearly shows formation of two‐ and three‐dimensional nanostructures. The assembly process is completely reversible by addition of alkaline ethylenediaminetetraacetic acid (EDTA) solution. The driving force for the assembly of peptide‐GNPs is mainly metal ion/carboxylate coordination. The color and spectral changes due to this assembly can be used for detection of these heavy‐metal ions in solution.     

Self‐Assembly of a Modified Amyloid Peptide Fragment: pH‐Responsiveness and Nematic Phase Formation

The self‐assembly of peptide YYKLVFFC based on a fragment of the amyloid beta (Aβ) peptide, Aβ16–20, KLVFF has been studied in aqueous solution. The peptide is designed with multiple functional residues to examine the interplay between aromatic interactions and charge on the self‐assembly, as well as specific transformations such as the pH‐induced phenol–phenolate transition of the tyrosine residue. Circular dichroism (CD) and Fourier‐transform infrared (FTIR) spectroscopies are used to investigate the conditions for β‐sheet self‐assembly and the role of aromatic interactions in the CD spectrum as a function of pH and concentration. The formation of well‐defined fibrils at pH 4.7 is confirmed by cryo‐TEM (transmission electron microscope) and negative stain TEM. The morphology changes at higher pH, and aggregates of short twisted fibrils are observed at pH 11. Polarized optical microscopy shows birefringence at a low concentration (1 wt.‐%) of YYKLVFFC in aqueous solution, and small‐angle X‐ray scattering was used to probe nematic phase formation in more detail. A pH‐induced transition from nematic to isotropic phases is observed on increasing pH that appears to be correlated to a reduction in aggregate anisotropy upon increasing pH.

     

Synthesis of New Chrial Building Blocks for Novel Peptide Nucleic Acids

N-Boc protected amino acids of analogues of peptide nucleic acid (PNA),which are a class of conformationally constrained building blocks based on 4-aminoproline backbone with chirality at 2-c and 4-c,have been synthesized.Those monomers can be used for the construction of novel peptide nucleic acid analogues.     

Synthesis of New Chiral Building Blocks for Novel Peptide Nucleic Acids

IntroductionAbouttenyearsago ,PNA ,astructuralmimicofDNAinwhichthesugar phosphatebackboneisreplacedbyN (2 aminoethyl)glycine (aeg)linkageemergedasapotentialanti sensetherapeuticagent.1PNAhassomeadvantages:(1)itisstabletocellularnucleasesandproteases,(2 )ithybridizeswithcomplementaryDNAorRNA (cDNA/RNA)sequenceswithhighaffinity ,(3)ithaslownon specificinteractionwithcellularcontentsand (4 )itiseasilysynthesizedbyadoptionofsolidphasepeptidesynthesischemistry .However,thema jorlimitationo…     

Zn2+‐Regulated Self‐Sorting and Mixing of Phosphates and Carboxylates on the Surface of Functionalized Gold Nanoparticles

Herein, we describe the self‐sorting of phosphate‐ and carboxylate‐containing molecules on the surface of monolayer‐protected gold nanoparticles. Self‐sorting is driven by selective interactions between the phosphate probe and Zn²⁺ complexes in one monolayer; these interactions force the carboxylate probe to move to a second type of nanoparticle. This process effectively separates the probes and causes their localization in well‐defined spaces surrounding the nanoparticles. The removal/addition of Zn²⁺ metal ions from the system is used to convert the system from an ordered to a disordered state and vice versa. The possibility to control the location and transport of populations of molecules in a complex mixture creates new perspectives for the development of innovative complex catalytic systems that mimic nature.     

Rapid Total Synthesis of Cyclic Lipodepsipeptides as a Premise to Investigate their Self‐Assembly and Biological Activity

A rapid and efficient total synthesis is reported for the cyclic lipodepsipeptide pseudodesmin A. This member of the Pseudomonas viscosin group is active against Gram‐positive bacteria and features self‐assembling properties. A conserved serine residue within the lactone macrocycle is exploited for initial immobilization on 2‐chlorotrityl chloride resin through ether formation with the side‐chain alcohol. Subsequent elongation proceeds through Fmoc solid‐phase peptide synthesis, including automated incorporation of the enantioselectively synthesized (R)‐3‐hydroxydecanoic acid lipid tail. Following esterification to generate the incipient lactone bond, the macrocycle is formed by on‐resin head‐to‐tail macrolactamization and cleaved from the resin to give the desired compound in good purity. The short and efficient synthesis route allows rapid generation of analogues by facile variation of both the peptide and lipid moieties with good control of epimerization while maximizing automation. Synthesis of the pseudodesmin A enantiomer yields identical self‐assembly and biological activity to that observed for the natural compound, showing that activity is not mediated by chiral interactions. A D ‐Asn8 analogue developed en route retains self‐assembly, but loses activity. The synthesis strategy should be generally applicable for the rapid generation of analogues from various cyclic lipodepsipeptide groups, allowing an investigation of their self‐assembling properties and structure–activity relationships.     

Self‐Assembling Nanoparticles at Surfaces and Interfaces

Nanoparticles are the focus of much attention due to their astonishing properties and numerous possibilities for applications in nanotechnology. For realising versatile functions, assembly of nanoparticles in regular patterns on surfaces and at interfaces is required. Assembling nanoparticles generates new nanostructures, which have unforeseen collective, intrinsic physical properties. These properties can be exploited for multipurpose applications in nanoelectronics, spintronics, sensors, etc. This review surveys different techniques, currently employed and being developed, for assembling nanoparticles in to ordered nanostructures. In this endeavour, the principles and methods involved in the development of assemblies are discussed. Subsequently, different possibilities of nanoparticle‐based nanostructures, obtained in multi‐dimensions, are presented.     

Evaporation‐Induced Ordered Honeycomb Structures of Gold Nanoparticles at the Air/Water Interface

The breath figure method was used to prepare dodecanethiol‐capped gold nanoparticle macroporous structures with pore diameters from 1.7 to 3.5 μm on an air/water interface. A two‐step procedure is proposed for the fabrication of these macroporous structures, by forming a surfactant monolayer on water, and drop‐casting a gold nanoparticle dispersion in chloroform onto the surfactant monolayer. The self‐assembled films are easily transferred from the water surface onto different substrates and were characterized by TEM, SEM, and AFM. Ordered honeycomb structures with different pore arrays (perforated monolayer films, hexagonal networks and alveoli‐like porous films) were obtained. The change in morphology is concentration dependent, and deformed structures with elliptic honeycomb networks are also observed. In addition, honeycomb films using gold nanoparticles stabilized by a weakly bound ligand (dioctadecyldimethylammonium chloride) were formed by the same technique. These films have potential as substrates for surface‐enhanced Raman spectroscopy.     

Synthesis of Photocrosslinkable and Amine Containing Multifunctional Nanoparticles via Polymerization‐Induced Self‐Assembly

Photo‐crosslinkable and amine‐containing block copolymer nanoparticles are synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization‐induced self‐assembly of a multifunctional core‐forming monomer, 2‐((3‐(4‐(diethylamino)phenyl)acryloyl)oxy)ethyl methacrylate (DEMA), using poly(2‐hydroxypropyl methacrylate) macromolecular chain transfer agent as a steric stabilizer in methanol at 65 °C. By tuning the chain length of PDEMA, a range of nanoparticle morphologies (sphere, worm, and vesicle) can be obtained. Since cinnamate groups can easily undergo a [2 + 2] cycloaddition of the carbon–carbon double bonds upon UV irradiation, the as‐prepared block copolymer nanoparticles are readily stabilized by photo‐crosslinking to produce anisotropic nanoparticles. The crosslinked block copolymer nanoparticles can be used as templates for in situ formation polymer/gold hybrid nanoparticles.

     

Synthesis of Peptoid Nucleic Acid with Thymine as Nucleic Base

The sequence specific bonding of oligonucleotide to RNA or double stranded DNA hasattTacted wide attention as the antisense and antigene strategies for treatment of diseasesat the level of gene expression in medicinal chemistry'. Peptide nucleic acids designedas a chemira of nucleobases and polyamidic backbone bind with high affinity andsequence specifity to both comPlementary RNA and DNA and a number of templatefunctions are inhibited on forming PNAasA and PNA/DNA complex'-'. In the …