Si?H and C?H Activation by Transition Metal Complexes: A Step Towards Isolable Alkane Complexes?

The recognition of the fundamental contributions by G. A. Olah on the elucidation of the structure of nonclassical carbocations, in the form of the award of the Nobel prize for chemistry, has recently emphasized the importance of electron-deficient bonds in the understanding of chemical bonding in organic chemistry. In the field of coordination chemistry, the formulation of electron-deficient bonds has been used for some time to describe nonclassical interactions between atoms. Traditional ligands in coordination chemistry such as amines and phosphanes bond to metal centers through their lone pair of electrons. Synergistic bonding effects dominate in the coordination of π-bonded ligands such as alkenes. In the mid-1980s the discovery of dihydrogen complexes having side-on coordination of H₂ gave fresh impetus to transition metal chemistry as well as to the understanding of the interaction of σ-coordinating ligands with transition metals. In the meantime, transiton metal complexes can be obtained with a variety of σ-coordinated X-H fragments, and their mode of bonding can be understood by a common and quite general model. The chemistry of σ-bound silane ligands is particularly varied and well-investigated. These silane ligands enable the investigation of a large range of σ-coordinated metal complex fragments up to complete oxidative addition with cleavage of the Si? H bond and formation of silyl(hydrido) complexes, which has thus also widened our general understanding of the bonding of other σ-bound ligands. Whilst there is a large range of isolable and stable H₂ and SiR₄ complexes available, there are no such alkane analogues known at present. Only when the C? H bond is part of a ligand that is already directly bonded to the transition metal center will the resulting chelate effect stabilize this agostic C-H-M interaction. The complexation of SiH₄, the simplest heavier homologue of CH₄, was achieved recently. This is a further step towards the understanding of the factors which govern σ-complexation of ligands at transition metal centers.     

Chiral nonracemic late-transition-metal organometallics with a metal-bonded stereogenic carbon atom: development of new tools for asymmetric organic synthesis

Transition-metal-catalyzed cross-coupling reactions and the Heck reaction have evolved into powerful tools for the construction of carbon-carbon bonds. In most cases, the reactive organometallic intermediates feature a carbon-transition-metal sigma bond between a sp(2)-hybridized carbon atom and the transition metal (Csp(2)--TM). New, and potentially more powerful approach to transition-metal-catalyzed asymmetric organic synthesis would arise if catalytic chiral nonracemic organometallic intermediates with a stereogenic sp(3)-hybridized carbon atoms directly bonded to the transition metal (C*sp(3)--TM bond) could be formed from racemic or achiral organic substrates, and subsequently participate in the formation of a new carbon-carbon bond (C*sp(3)-C) with retention of the stereochemical information. To date, only a few catalytic processes that are based on this concept, have been developed. In this account, both "classical" and recent studies on preparation and reactivity of stable chiral nonracemic organometallics with a metal-bonded stereogenic carbon, which provide the foundation for the future design of new synthetic transformations exploiting the outlined concept, are discussed, along with examples of relevant catalytic processes.     

Investigations on the coupling of ethylene and alkynes in [IrTp Me2] compounds: water as an effective trapping agent

The reaction of the bis(ethylene) complex [Tp(Me(2) )Ir(C(2)H(4))(2)] (1) (Tp(Me(2) ): hydrotris(3,5-dimethylpyrazolyl)borate) with two equivalents of dimethyl acetylenedicarboxylate (DMAD) in CH(2)Cl(2) at 25 degrees C gives the hydride-alkenyl species [Tp(Me(2) )IrH{C(R)=C(R)C(R)=C(R)CH=CH(2)}] (2, R: CO(2)Me) in high yield. A careful study of this system has established the active role of a number of intermediates en route to producing 2. The first of these is the iridium(I) complex [Tp(Me(2) )Ir(C(2)H(4))(DMAD)] (4) formed by substitution of one of the ethylene ligands in 1 by a molecule of DMAD. Complex 4 reacts further with another equivalent of the alkyne to give the unsaturated metallacyclopentadiene [Tp(Me(2) )Ir{C(R)=C(R)C(R)=C(R)}], which can be trapped by added water to give adduct 7, or can react with the C(2)H(4) present in solution generating complex 2. This last step has been shown to proceed by insertion of ethylene into one of the Ir--C bonds of the metallacyclopentadiene and subsequent beta-H elimination. Complex 1 reacts sequentially with one equivalent of DMAD and one equivalent of methyl propiolate (MP) in the presence of water, with regioselective formation of the nonsymmetric iridacyclopentadiene [Tp(Me(2) )Ir{C(R)=C(R)C(H)=C(R)}(H(2)O)] (9). Complex 9 reacts with ethylene giving a hydride-alkenyl complex 10, related to 2, in which the C(2)H(4) has inserted regiospecifically into the Ir--C(R) bond that bears the CH functionality. Heating solutions of either 2 or 10 in CH(2)Cl(2) allows the formation of the allyl species 3 or 11, respectively, by simple stereoselective migration of the hydride ligand to the Calpha alkenyl carbon atom and concomitant bond reorganization of the resulting organic chain. All the compounds described herein have been characterized by microanalysis, IR and NMR spectroscopy, and for the case of 3, 7, 7CO, 8NCMe, 9, 9NCMe, and 10, also by single-crystal X-ray diffraction studies.     

Deprotonation of C‐Alkyl Groups of Cationic Triruthenium Clusters Containing Cyclometalated C‐Alkylpyrazinium Ligands: Experimental and Computational Studies

The C‐alkyl groups of cationic triruthenium cluster complexes of the type [Ru₃(μ‐H)(μ‐κ²N¹,C² ‐L)(CO)₁₀]⁺ (HL represents a generic C‐alkyl‐N‐methylpyrazium species) have been deprotonated to give kinetic products that contain unprecedented C‐alkylidene derivatives and maintain the original edge‐bridged decacarbonyl structure. When the starting complexes contain various C‐alkyl groups, the selectivity of these deprotonation reactions is related to the atomic charges of the alkyl H atoms, as suggested by DFT/natural‐bond orbital (NBO) calculations. Three additional electronic properties of the C‐alkyl C? H bonds have also been found to correlate with the experimental regioselectivity because, in all cases, the deprotonated C? H bond has the smallest electron density at the bond critical point, the greatest Laplacian of the electron density at the bond critical point, and the greatest total energy density ratio at the bond critical point (computed by using the quantum theory of atoms in molecules, QTAIM). The kinetic decacarbonyl products evolve, under appropriate reaction conditions that depend upon the position of the C‐alkylidene group in the heterocyclic ring, toward face‐capped nonacarbonyl derivatives (thermodynamic products). The position of the C‐alkylidene group in the heterocyclic ring determines the distribution of single and double bonds within the ligand ring, which strongly affects the stability of the neutral decacarbonyl complexes and the way these ligands coordinate to the metal atoms in the nonacarbonyl products. The mechanisms of these decacarbonylation processes have been investigated by DFT methods, which have rationalized the structures observed for the final products and have shed light on the different kinetic and thermodynamic stabilities of the reaction intermediates, thus explaining the reaction conditions experimentally required by each transformation.     

Functionalization of Organic Molecules by Transition‐Metal‐Catalyzed C(sp3)?H Activation

Transition‐metal‐catalyzed C? H activation has recently emerged as a powerful tool for the functionalization of organic molecules. While many efforts have focused on the functionalization of arenes and heteroarenes by this strategy in the past two decades, much less research has been devoted to the activation of non‐acidic C? H bonds of alkyl groups. This Minireview highlights recent work in this area, with a particular emphasis on synthetically useful methods.     

Asymmetric C(sp2)?H Activation

A “niche” topic in the past decade, the asymmetric C? H bond activation has been attracting growing interest over the last few years. Particularly significant advances have been achieved in the field of direct, stereoselective transformations of C(sp²)? H bonds. This Concept article intends to showcase different types of asymmetric C(sp²)? H bond activation reactions, emphasising both the nature of the stereo‐discriminating step and the variability of valuable scaffolds that could be rapidly constructed by means of such strategies.     

Methylene transfer from SnMe groups mediated by a rhodium(I) pincer complex: Sn-C, C-C, and C-H bond activation

The PCP-Rh(I) complex 1a based on the [1,3-phenylenebis(methylene)]bis(diisopropylphosphine) ligand reacts with [diazo(phenyl)methyl]trimethylstannane (2) at room temperature to give novel pincer-type phenyl(dimethylstannyl)methylene]hydrazinato complex 3a. The reaction sequence involves a unique combination of Sn-C bond cleavage, C-C bond formation, C-H activation and intramolecular deprotonation of a rhodium hydride intermediate, which results in methylene transfer from an SnMe group to the pincer system and PCP-chelate expansion. A methylene-transfer reaction was also demonstrated with tetramethyltin as the methylene source in the presence of KOC(CH(3))(3) at room temperature. The resulting unstable "chelate-expanded" Rh(I) complex [(C(10)H(5)(CH(2)PiPr(2))(2))(CH(2))Rh(L)] (L=N(2), THF; 4a) was isolated as its carbonyl derivative 5a. Heating 4a in benzene yielded an equimolar amount of toluene and 1a, which demonstrates the ability of the Rh(I) pincer complex to extract a methylene group from an unactivated alkyl tin substrate and transfer it, via C-C followed by C-H activation, to an arene. Use of fluorobenzene resulted in formation of fluorotoluene. Catalytic methylene-group transfer mediated by 1a was not possible, because of formation of o-xylylene complex 8 under the reaction conditions. Steric parameters play a decisive role in the reactivity with tin compounds; while iPrP derivative 1 a underwent facile reactions, tBuP complex 1b was inert.     

Osmium-mediated C--H and C--C bond cleavage of a phenolic substrate: p-quinone methide and methylene arenium pincer complexes

The diphosphine 2,4,6-(CH(3))(3)-3,5-(iPr(2)PCH(2))(2)C(6)OH (1) reacts with [OsCl(2)(PPh(3))(3)] in presence of an excess of triethylamine to yield the isomeric para-quinone methide derivatives [Os{4-(CH(2))-1-(O)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))] (2 and 3), which differ in the positions of the mutually trans hydride and chloride ligands. Complex 2 reacts with CO to afford the dicarbonyl species [Os{1-(O)-2,4,6-(CH(3))(3)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(CO)(2)] (4), which results from hydride insertion into the quinonic double bond. Protonation of 2 and 3 leads to the formation of the methylene arenium derivative [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))][OSO(2)CF(3)] (5 a). The diphosphine 1 reacts with [OsCl(2)(PPh(3))(3)] at 100 degrees C under H(2) to afford [Os{1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H(2))(PPh(3))] (6), a PCP pincer complex resulting formally from C(sp(2))--C(sp(3)) cleavage of the C--CH(3) group in 1. C--C hydrogenolysis resulting in the same complex is achieved by heating 2 under H(2) pressure. Reaction of the diphosphine substrate with [OsCl(2)(PPh(3))(3)] under H(2) at lower temperature allows the observation of a methylene arenium derivative resulting from C--H activation, [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(2)(H)] (7). This compound reacts with PPh(3) in toluene to afford the ionic derivative [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))]Cl (5 b). X-ray diffraction studies have been carried out on compounds 2, 3, 4, 5 b, 6, and 7, which allows the study of the structural variations when going from methylene arenium to quinone methide derivatives.