Development and validation of a RP‐HPLC method for stability‐indicating assay of gemifloxacin mesylate including identification of related substances by LC‐ESI‐MS/MS, 1H and 13C NMR spectroscopy

A validated stability indicating RP‐HPLC assay of gemifloxacin mesylate was developed by separating its related substances on an Inertsil‐ODS3V‐C₁₈ (4.6 × 250 mm; 5 μm) column using 0.1% trifluoroaceticacid (pH 2.5) and methanol as a mobile phase in a gradient elution mode at a flow rate of 1.0 mL/min at 27°C. The column effluents were monitored by a photodiode array detector set at 287 nm. The method was validated in terms of accuracy, precision and linearity as per ICH guidelines. Forced degradation of gemifloxacin (GFX) was carried out under acidic, basic, thermal, photolysis and peroxide conditions and the degradation products were separated and characterized by ESI‐MS/MS, ¹H and ¹³C NMR spectroscopy. The method was successfully applied to the analysis of bulk drugs and the recoveries of gemifloxacin and impurities were in the range of 97.60–102.90 and 96.99–102.10%, respectively. No previous reports were found in the literature on identification of degradation products of gemifloxacin. Copyright © 2011 John Wiley & Sons, Ltd.     

Monitoring of the degradation kinetics of diatrizoate sodium to its cytotoxic degradant using a stability‐indicating high‐performance liquid chromatographic method

The X‐ray diagnostic agent sodium diatrizoate (DTA) was studied for chemical degradation. The 3,5‐diamino derivative was found to be the alkaline and acidic degradation product. The 3,5‐diamino degradate is also the synthetic precursor of DTA and it is proved to have cytotoxic and mutagenic effects. A sensitive, selective and precise high‐performance liquid chromatographic stability‐indicating method for the determination of DTA in the presence of its acidic degradation product and in pharmaceutical formulation was developed and validated. Owing to the high toxicity of the degradation product, the kinetics of the acidic degradation process was monitored by the developed RP‐HPLC method. The reaction was found to follow pseudo‐first order kinetics. The kinetic parameters such as rate constant (K ) and half‐life (t _½) were calculated under different temperatures and acid concentrations; activation energy was estimated from the Arrhenius plot. The developed RP‐HPLC method depends on isocratic elution of a mobile phase composed of methanol–water (25:75 v /v; pH adjusted with phosphoric acid), and UV detection at 238 nm. The method showed good linearity over a concentration range of 2–100 μg/mL with mean percentage recovery of 100.04 ± 1.07. The selectivity of the proposed method was tested using laboratory‐prepared mixtures. The proposed method has been successfully applied to the analysis of DTA in pharmaceutical dosage forms without interference from other dosage form additives and the results were statistically compared with the official USP method. Validation of the proposed method was performed according to International Conference on Harmonization guidelines.     

Stability‐indicating HPTLC method for quantitative estimation of silybin in bulk drug and pharmaceutical dosage form

In the present study a novel stability‐indicating high‐performance thin‐layer chromatography (HPTLC) method for quantitative determination of silybin in bulk drug and nanoemulsion formulation has been developed and validated on silica using solvent chloroform–acetone–formic acid (9 : 2 : 1 v/v/v) (R_f of silybin 0.46 ± 0.05) in the absorbance mode at 296 nm. The method showed a good linear relationship (r² ± 0.999) in the concentration range 25–1500 ng per spot. It was found to be linear, accurate, precise, specific, robust and stability‐indicating and can be applied for quality control and standardization of several multi‐component hepatoprotective formulations as well as for stability testing of different dosage forms. The method proposed was also used to investigate the kinetics of acidic and alkaline degradation processes by quantification of drug at different temperature to calculate the activation energy and half‐life for silymarin degradation. Copyright © 2009 John Wiley & Sons, Ltd     

Characterisation of oxazepam degradation products by high‐performance liquid chromatography/electrospray ionisation mass spectrometry and electrospray ionisation quadrupole time‐of‐flight tandem mass spectrometry

Oxazepam has been subjected to controlled degradation at 100°C for 3 h in 0.5 M HCl and 0.5 M NaOH. Following neutralisation of the degradation mixture and removal of salts by solid‐phase extraction (SPE), isocratic high‐performance liquid chromatography/mass spectrometry (HPLC/MS) using water/methanol (25:75 v/v) as the mobile phase was carried out using a flow diverter to collect fractions prior to their characterisation by electrospray ionisation multi‐stage mass spectrometry (ESI‐MSⁿ) and proposal of the corresponding fragmentation patterns. The elemental compositions of the degradation products and their MS fragments were evaluated using electrospray ionisation quadrupole time‐of‐flight tandem mass spectrometry (ESI‐QTOF‐MS/MS) which was then used to support the proposed fragmentation patterns. Copyright © 2010 John Wiley & Sons, Ltd.     

Determination of lumiracoxib by a validated stability‐indicating MEKC method and identification of its degradation products by LC‐ESI‐MS studies

A stability‐indicating MEKC method was developed and validated for the analysis of lumiracoxib (LMC) in pharmaceutical formulations using nimesulide as the internal standard (IS). Optimal conditions for the separation of LMC and degradation products were investigated. The method employed 50 mM borate buffer and 50 mM anionic detergent SDS solution at pH 9.0. MEKC method was performed on a fused‐silica capillary (50 μm id; effective length, 40 cm) maintained at 30°C. The applied voltage was 20 kV and photodiode array (PDA) detector was set at 208 nm. The method was validated in accordance with the International Conference on Harmonisation requirements. The stability‐indicating capability of the method was established by enforced degradation studies combined with peak purity assessment using PDA detection. The degradation products formed under stressed conditions were investigated by LC‐ESI‐MS and the two degraded products were identified. MEKC method was linear over the concentration range of 5–150 μg/mL (r²=0.9999) of LMC. The method was precise, accurate, with LOD and LOQ of 1.34 and 4.48 μg/mL, respectively. The robustness was proved by a fractional factorial design evaluation. The proposed MEKC method was successfully applied for the quantitative analysis of LMC in tablets to support the quality control.     

Characterization of degradation products of Ivabradine by LC‐HR‐MS/MS: a typical case of exhibition of different degradation behaviour in HCl and H2SO4 acid hydrolysis

A validated stability‐indicating HPLC method was established, and comprehensive stress testing of ivabradine, a cardiotonic drug, was carried out as per ICH guidelines. Ivabradine was subjected to acidic, basic and neutral hydrolysis, oxidation, photolysis and thermal stress conditions, and the resulting degradation products were investigated by LC‐PDA and LC‐HR‐MS/MS. The drug was found to degrade in acid and base hydrolysis. An efficient and selective stability assay method was developed on Phenomenex Luna C18 (250 × 4.6 mm, 5.0 µm) column using ammonium formate (10 mM, pH 3.0) and acetonitrile as mobile phase at 30 °C in gradient elution mode. The flow rate was 0.7 ml/min and detection wavelength was 286 nm. A total of five degradation products (I‐1 to I‐5) were identified and characterized by LC‐HR‐MS/MS in combination with accurate mass measurements. The drug exhibited different degradation behaviour in HCl and H₂SO₄ hydrolysis conditions. It is a unique example where two of the five degradation products in HCl hydrolysis were absent in H₂SO₄ acid hydrolysis. The present study provides guidance to revise the stress test for the determination of inherent stability of drugs containing lactam moiety under hydrolytic conditions. Most probable mechanisms for the formation of degradation products have been proposed on the basis of a comparison of the fragmentation pattern of the drug and its degradation products. In silico toxicity revealed that the degradation products ( I‐2 to I‐5 ) were found to be severe irritants in case of ocular irritancy. The analytical assay method was validated with respect to specificity, linearity, range, precision, accuracy and robustness. Copyright © 2015 John Wiley & Sons, Ltd.     

A validated stability‐indicating ultra performance liquid chromatography method for the determination of potential process‐related impurities in eplerenone

A simple, sensitive, and accurate stability‐indicating analytical method has been developed and validated using ultra high performance liquid chromatography. The developed method is used to evaluate the related substances of eplerenone (EP). The degradation behavior of EP under stress conditions was determined, and the major degradants were identified by ultra high performance liquid chromatography with tandem mass spectrometry. The chromatographic conditions were optimized using an impurity‐spiked solution, and the samples, generated from forced degradation studies. The resolution of EP, its potential impurities, and its degradation products was performed on a Waters UPLC BEH C₁₈ column (50 × 2.1 mm, 1.7 μm) by linear gradient elution using a mobile phase consisting of 10 mmol/L ammonium acetate adjusted to pH 4.5, methanol and acetonitrile. A photo‐diode array detector set at 245 nm was used for detection. The flow rate was set at 0.3 mL/min. The procedure had good specificity, linearity (0.02–3.14 μg/mL), recovery (96.1–103.9%), limit of detection (0.01–0.02 μg/mL), limit of quantitation (0.03–0.05 μg/mL), and robustness. The correction factors of the process‐related substances were calculated.     

Forced degradation studies of clobetasol 17‐propionate in methanol,propylene glycol,as bulk drug and cream formulations by RP‐HPLC

A rapid, simple, stability‐indicating forced degradation study of clobetasol 17‐propionate was conducted using RP‐HPLC. The method was used to analyze clobetasol 17‐propionate in methanol, propylene glycol, and a cream formulation. Isocratic elution of clobetasol and its degradation products was achieved using a Nova‐Pak® 4 μm C₁₈ 150 mm × 3.9 mm id cartridge column and a mobile phase of methanol: water (68:32 v/v) at a flow rate of 0.9 mL min^?1. Quantitation was achieved with UV detection at 239 nm. Nondegraded clobetasol was eluted at a retention time of 6.0 min. Clobetasol 17‐propionate was subjected to different stress conditions viz., acidic, basic, heat, oxidation, light, and neutral hydrolysis. The greatest degradation occurred under strong base and oxidative conditions. Strong base‐degraded clobetasol produced additional peaks at retention times of 1.8, 4.0, 5.0, and 8.0 min and clobetasol oxidation degradation peaks eluted at 2.2 and 24 min. Complete validation was performed for linearity, accuracy, and precision over the concentration range 0.15–15 μg mL^?1. All data were analyzed statistically and this RP‐HPLC method proved to be accurate, precise, linear, and stability indicating for the quantitation of clobetasol 17‐propionate in methanol, propylene glycol, and cream formulations.     

LC-MS-MS Development and Validation for Quantitative Determination of Methoxsalen in Human Plasma

A rapid, sensitive and specific method for quantification of methoxsalen in human plasma using metaxalone as the internal standard is presented. An Applied Biosystems Sciex API 3200 triple quadrupole mass spectrometer in multiple reaction monitoring mode, using TurboIonSpray in the positive ion mode was used. Simple solid phase extraction was followed by C18 reverse phase chromatography and tandem mass spectrometry using metaxalone as the internal standard. The mean recovery for methoxsalen was 90.0% with a lower limit of quantification of 1.0 ng mL^?1. This validated assay method makes use of the sensitivity and selectivity of tandem mass spectrometry detection to allow for a more rapid and selective method for the determination of methoxsalen in human plasma.     

MSn,LC‐MS‐TOF and LC‐PDA studies for identification of new degradation impurities of bupropion

Three new degradation impurities of bupropion were characterized through high performance liquid chromatography coupled to photodiode array detection and to time‐of‐flight mass spectrometry. Bupropion was subjected to the ICH prescribed stress conditions. It degraded to seven impurities (I–VII) in alkaline hydrolytic conditions which were optimally resolved on an XTerra C₁₈ column (250 × 4.6 mm, 5 µm) with a ternary mobile phase comprising ammonium formate (20 mm , pH 4.0), methanol and acetonitrile (75:10:15, v/v). The degradation impurities (III–V and VII) were characterized on the basis of mass fragmentation pattern of drug, accurate mass spectral and photodiode array data of the drug and degradation impurities. Compound V was found to be a known degradation impurity [1‐hydroxy‐1‐(3‐chlorophenyl)propan‐2‐one], whereas III, IV and VII were characterized as 2‐hydroxy‐2‐(3′‐chlorophenyl)‐3,5,5‐trimethylmorpholine, (2,4,4‐trimethyl‐1,3‐oxazolidin‐2‐yl)(3‐chlorophenyl)‐methanone and 2‐(3′‐chlorophenyl)‐3,5,5‐trimethylmorphol‐2‐ene, respectively. Compound III was a known metabolite of the drug. This additional information on the degradation impurities can help in the development of a new stability‐indicating assay method to monitor the stability of the drug product during its shelf‐life as well as in development of a drug product with increased shelf‐life. Copyright © 2013 John Wiley & Sons, Ltd.     

Stability of doripenem in reconstituted solution – thermal and oxidative decomposition kinetics and degradation products by LC–MS

A ultra‐fast liquid chromatography method applied to quantitation of doripenem in powder for injection was validated. Validation parameters were assayed and a rapid analysis was established by a reversed‐phase system comprising a C₁₈ column endcapped (50 × 4.0 mm, 2.0 μm), mobile phase consisting of phosphoric acid 0.01% (pH 3.8) and acetonitrile (98:02, v /v) and a flow rate of 0.4 mL min⁻¹. Drug stability was studied through submission to forced conditions, allowing the major degradation products to be detected and the kinetics parameters to be established. Thermal and oxidative degradation were determined, and indicated a kinetic decomposition following first and second order, respectively. The main degradation products were identified by LC–MS analysis, and the results were evaluated in order to suggest the chemical structures corresponding to respective masses and fragmentations. Six compounds were identified, with m/z 411, 427, 437, 634, 650 and 664. All of them resulted from cleavage of β ‐lactam ring and alcoholic chain and/or dimerization. These experimental results provide valuable information about the stability of doripenem reconstituted solution and procedures for its handling and storage.     

High‐resolution MALDI‐TOF MS study on analysis of low‐molecular‐weight products from photo‐oxidation of poly(3‐hexylthiophene)

High‐resolution matrix‐assisted laser desorption/ionization (MALDI) time‐of‐flight mass spectrometry (TOF MS) was used for the analysis of the low‐molecular‐weight products from the photo‐oxidation of poly(3‐hexylthiophene) (P3HT) in solution and thin film. Eight new peak series were observed in the low‐mass range of the mass spectra of the products degraded in solution, and the formulas of the eight components were determined from the accurate mass. From SEC/MALDI‐TOF MS, two components were identified as the degraded products, and the other six components were derived from the fragmentation of the degraded products during the MALDI process. A mechanism for the formation of these components was proposed on the basis of the results of MALDI‐TOF MS. For the thin film degradation, a part of products in the solution degradation were observed, which supports that the oxidation of P3HT in solution and thin film proceeded in the same mechanism. This study shows that high‐resolution MALDI‐TOF MS is effective for the analysis of the low‐molecular‐weight products from P3HT photo‐oxidation and expected to be feasible for the degradation analyses of other polymers. Copyright © 2015 John Wiley & Sons, Ltd.     

Reversed‐phase liquid chromatography with electrospray mass detection and 1H and 13C NMR characterization of new process‐related impurities,including forced degradants of Efavirenz: Related substances correlated to the synthetic pathway

In this study, a stability‐indicating reversed‐phase liquid chromatographic electrospray mass spectrometric method was developed and validated for the determination of process‐related impurities and forced degradants of Efavirenz in bulk drugs. Efavirenz was subjected to acid, alkaline hydrolysis, H₂O₂ oxidation, photolysis, and thermal stress. Significant degradation was observed during alkaline hydrolysis, and the degradants were isolated on a mass‐based purification system and characterized by high‐resolution mass spectrometry, positive electrospray ionization tandem mass spectrometry, and ¹H and ¹³C NMR spectroscopy. Accurate mass measurement and NMR spectroscopy revealed the possible structure of process‐related impurities and degradant under stress conditions. The acceptable separation was accomplished on Waters bondapak C₁₈ column (250 mm × 4.6 mm; 5 μm), using 5 mM ammonium acetate and acetonitrile as a mobile phase in a gradient elution mode at a flow rate of 1.0 mL/min. The eluents were monitored by diode array detector at 247 nm and quantitation limits were obtained in the range of 0.1–2.5 μg/mL for Efavirenz, degradants, and process‐related impurities. The liquid chromatography method was validated with respect to accuracy, precision, linearity, robustness, and limits of detection and quantification as per International Conference on Harmonization guidelines.     

Characterization of forced degradation products of pazopanib hydrochloride by UHPLC‐Q‐TOF/MS and in silico toxicity prediction

Pazopanib (PZ), an anti‐cancer drug, was subjected to forced degradation under hydrolytic (acid, base and neutral), oxidative, photolytic and thermal stress conditions as per International Conference on Harmonization guidelines. A selective stability indicating validated method was developed using a Waters Acquity UPLC HSS T3 (100 × 2.1 mm, 1.7 µm) column in gradient mode with ammonium acetate buffer (10 m m , pH 5.0) and acetonitrile. PZ was found to degrade only in photolytic conditions to produce six transformation products (TPs). All the TPs were identified and characterized by liquid chromatography/atmospheric pressure chemical ionization–quadrupole‐time of flight mass spectrometry experiments in combination with accurate mass measurements. Plausible mechanisms have been proposed for the formation of TPs. In silico toxicity was predicted using TOPKAT and DEREK softwares for all the TPs. The TP, N4‐(2,3‐dimethyl‐2H‐indazol‐6‐yl)‐N4‐methylpyrimidine‐2,4‐diamine, was found to be genotoxic, whereas all other TPs with sulfonamide moiety were hepatotoxic. The data reported here are expected to be of significance as this study foresees the formation of one potential genotoxic and five hepatotoxic degradation/transformation products. Copyright © 2015 John Wiley & Sons, Ltd.     

Stability‐indicating analytical method of quantifying spironolactone and canrenone in dermatological formulations and iontophoretic skin permeation experiments

A simple, stability‐indicating, chromatographic method of quantifying spironolactone (SPI) and its metabolite, canrenone (CAN), in the presence of excipients typical in dermatological formulations and skin matrices in studies of passive and iontophoretic permeation was proposed and validated here. SPI and CAN were separated using a reversed‐phase column with a mobile phase of methanol–water (60:40, v/v) at a flow rate of 1.0 mL/min. Data were collected with a UV detector at 238 and 280 nm, with retention times of 6.2 and 7.9 min for SPI and CAN, respectively. The method was precise, accurate and linear (r² > 0.99) in a concentration range of 1–30 μg/mL, and recovery rates of SPI and CAN from the different skin layers exceeded 85%. The method was not only sensitive (LOD of 0.05 and 0.375 μg/mL and LOQ of 0.157 and 1.139 μg/mL for SPI and CAN, respectively) but also selective against skin matrices and highly representative components of topical formulations. The method moreover demonstrated SPI's degradation in iontophoresis by applying Pt–AgCl electrodes and its continued drug stability using Ag–AgCl electrodes. Altogether, the method proved valuable for quantifying SPI and CAN and may be applied in developing and controlling the quality of dermatological products.     

Chromatographic methods development,validation and degradation characterization of the antithyroid drug Carbimazole

The current paper reports the development and validation of stability‐indicating HPLC and HPTLC methods for the separation and quantification of main impurity and degradation product of Carbimazole. The structures of the degradation products formed under stress degradation conditions, including hydrolytic and oxidative, photolytic and thermal conditions, were characterized and confirmed by MS and IR analyses. Based on the characterization data, the obtained degradation product from hydrolytic conditions was found to be methimazole—impurity A of Carbimazole as reported by the British Pharmacopeia and the European Pharmacopeia. A stability‐indicating HPLC method was carried out using a Zorbax Eclipse Plus CN column (150 × 4.6 mm i.d, 5 μm particle size) and a mobile phase composed of acetonitrile–0.05 m KH₂PO₄ (20: 80, v/v) in isocratic elution, at a flow rate of 1 mL/min. The method was proved to be sensitive for the determination down to 0.5% of Carbimazole impurity A. Additionally, a stability‐indicating chromatographic HPTLC method was achieved using cyclohexane–ethanol (9:1, v/v) as a developing system on HPTLC plates F₂₅₄ with UV detection at 225 nm. The proposed HPLC and HPTLC methods were successfully applied to Carbimazole^® tablets with mean percentage recoveries of 100.12 and 99.73%, respectively.     

Liquid chromatographic separation and thermodynamic investigation of stereoisomers of darunavir on Chiralpak AD‐Hcolumn

Liquid chromatographic separation of stereoisomers of darunavir on Chiralpak AD‐H, a column containing the stationary phase coated with amylose tris(3,5‐dimethylphenylcarbamate) as a chiral selector, was studied under normal‐phase conditions at different temperatures between 20 and 50°C. The effect of quality and quantity of different polar organic modifiers viz: methanol, ethanol, 1‐propanol, and 2‐propanol in the mobile phase as well as column temperature on retention, separation, and resolution was investigated and optimized. The optimum separation was accomplished using a mobile phase composed of n‐hexane/ethanol/diethyl amine (80:20:0.1 v/v/v) at 40°C. Apparent thermodynamic parameters ΔH⁰ and ΔS* were derived from the Van't Hoff plots (lnk′ versus 1/T) and used to explain the strength of interactions between the stereoisomers and amylose tris(3,5‐dimethylphenylcarbamate) coated chiral stationary phase.     

Stability‐indicating HPLC method for simultaneous quantification of 14 impurities in excedrin tablet formulations and identification of new impurity by LC–MS in accelerated stability studies

We developed novel stability‐indicating HPLC method for simultaneous estimation of 14 impurities in excedrin tablet, a formulation with a combination of acetaminophen, aspirin, and caffeine. In addition, a new impurity that was generated through degradation of aspirin at high temperatures during the accelerated stability conditions was positively identified and confirmed, using liquid chromatography–mass spectrometry technique. The HPLC method was optimized using the Inertsustain C₁₈, 250 × 4.6 mm, 5.0 μm column, employing simple gradient method. Forced degradation studies were performed under acidic, basic, oxidative and thermal conditions to prove the scope and stability‐indicating the nature of the method. The optimized method was validated as per the International Conference on Harmonization guidelines. The HPLC method showed linearity from LOQ concentration to 21 μg mL^?1. Precision and intermediate precision values were <5% RSD. The validated HPLC method is currently applied for the routine testing of excedrin tablet formulations in quality control laboratories.     

Stressed Kinetics of Nanoemulsion Formulation Encapsulated Ropinirole with a Validated Ultra High Performance Liquid Chromatography–Synapt Mass Spectrometry (UPLC‐MS/MS ESI‐Q‐TOF)

A highly sensitive ultra high pressure liquid chromatography (UHPLC‐MSMS) method for estimation of ropinirole in rat brain homogenate and plasma has been validated. The method was successfully used for the degradation kinetics in different stress condition and regulated temperature. The chromatographic separation was achieved using isocratic mobile phase, consisting of acetonitrile–2mM ammoniumacetate (28:72 v/v; 0.25 mL min^?1). The mass spectrometer was operated in synapt mass spectrometry mode via positive electrospray ionization using the transitions m/z 260 → m/z 261 for ropinirole, and m/z 324.39 → m/z 262.161 as a parent ion of escitalopram (IS). The assay for ropinirole was linear over the range of 0.5–100 ng mL^?1 (r²; 0.999). The intra‐ and inter day precisions were less than 11.2% in terms of relative standard deviation (R.S.D.), and the accuracy was within ±6.4% in terms of relative error (RE). The mean extraction‐efficiency of QC samples (MQC, 8 ng/mL) was ≥80%. The lower limit of quantification (LLOQ) was 0.049 ng/mL where as lower limit of detection (LLOD) was 0.016 ng/mL. All the peaks of degradation were well resolved. The degradation kinetics of ropinirole, showed highest stability (t_1/2 256.66/h; t_0.9, 39.11/h) in acidic medium, lower stability in alkaline environment (t_1/2, 103.43/h; t_0.9, 15.76/h) and highly susceptible in oxidative environment (t_1/2, 21.58/h; t_0.9, 3.28/h). The applicability of this assay was demonstrated and successfully applied for pharmacokinetic profiling of ropinirole in Wister rat brain homogenate after intranasal administration.     

Two validated chromatographic determinations of an antifungal drug,its toxic impurities and degradation product: A comparative study

Tolnaftate, a thionoester anti‐fungal drug, was subjected to alkaline hydrolysis to produce methyl(m‐tolyl)carbamic acid and β ‐naphthol (tolnaftate impurity A). N‐Methyl‐m‐toluidine, tolnaftate impurity D, was synthesized and structurally elucidated along with tolnaftate alkaline degradation products using IR, H¹NMR and MS. Two stability‐indicating HPTLC and RP‐HPLC methods were developed and validated, for the first time, for determination of tolnaftate, its alkaline degradation products and toxic impurities in the presence of methyl paraben, as a preservative in Tinea Cure^® cream. The proposed HPTLC method depended on separation of the studied components on TLC silica gel F₂₅₄ plates using hexane–glacial acetic acid (8:2, v/v) as a developing system and scanning wavelength of 230 nm. The proposed RP‐HPLC method was based on separation of the five components on an Eclipse plus C₁₈ column. The mobile phase used was acetonitrile–water containing 1% ammonium formate (40:60, v/v), with a flow rate of 1 mL/min and detection wavelength of 230 nm. The proposed methods allowed the assay of tolnaftate toxic impurities, β ‐naphthol and N‐methyl‐m‐toluidine, down to 2%, allowing tracing of β ‐naphthol that could be absorbed by the skin causing systemic toxic effects, unlike tolnaftate, indicating the high significance of such determination. International Conference on Harmonization guidelines were followed for validation.