Fabrication of Luminescent CdS Nanoparticles on Short‐Peptide‐Based Hydrogel Nanofibers: Tuning of Optoelectronic Properties

The pH‐induced self‐assembly of three synthetic tripeptides in water medium is used to immobilize luminescent CdS nanoparticles. These peptides form a nanofibrillar network structure upon gelation in aqueous medium at basic pH values (pH 11.0–13.0), and the fabrication of CdS nanoparticles on the gel nanofiber confers the luminescent property to these gels. Atomic force microscopy, field‐emission scanning electron microscopy, and high‐resolution transmission electron microscopy clearly reveal the presence of CdS nanoparticles in a well‐defined array on the gel nanofibers. This is a convenient way to make organic nanofiber–inorganic nanoparticle hybrid nanocomposite systems. The size of the CdS nanoparticles remains almost same before and after deposition on the gel nanofiber. Photoluminescence (PL) measurement of the CdS nanoparticles upon deposition on the gel nanofibers shows a significant blue shift in the emission spectrum of the nanoparticles, and there is a considerable change in the PL gap energy of the CdS nanoparticles after immobilization on different gel nanofibrils. This finding suggests that the optoelectronic properties of CdS nanoparticles can be tuned upon deposition on gel nanofibers without changing the size of the nanoparticles.     

Assembly of Preformed Gold Nanoparticles onto Thermoresponsive Poly(N‐isopropylacrylamide)‐Based Microgels on the Basis of Au‐thiol Chemistry

The assembly of preformed gold nanoparticles (AuNPs ) onto the thermoresponsive poly(N ‐isopropylacrylamide) (PNIPAM )‐based microgels was achieved on the basis of the driving force of Au‐thiol chemistry. The loading amount of AuNPs can be controlled by varying the ratio of AuNPs relative to PNIPAM ‐based microgels. The as‐prepared PNIPAM /Au hybrid microgels showed well‐defined reversible swelling/deswelling transition in response to temperature, which can be employed to tune the plasmonic property of hybrid microgels. As the temperature was increased, the position of localized surface plasmon resonance (LSPR ) band red‐shifted to some extent mainly due to the increase in the local refractive index around AuNPs .     

Hybrid Organic–Inorganic Silica Gel Carriers with Controlled Drug‐Delivery Properties

Pure and modified silica materials were synthesised by a sol–gel process and used as carrier for the controlled release of ibuprofen, selected as model drug. A one‐step synthesis was optimised for the preparation of various silica–drug composites by using tetraethoxysilane and 3‐aminopropyltriethoxysilane as precursors at different molar ratios. The presence of aminopropyl groups on the silica surface influences the drug‐delivery rate leading to a high degree the desorption process controlled.     

Biomineralization‐Inspired Preparation of Zinc Hydroxide Carbonate/Polymer Hybrids and Their Conversion into Zinc Oxide Thin‐Film Photocatalysts

The development of ZnO thin films has been achieved through the conversion of zinc hydroxide carbonate thin‐film crystals. Crystallization of this compound is induced by a biomineralization‐inspired method with polymer‐stabilized amorphous precursors. The crystals grow radially on polymer matrices, leading to the formation of zinc hydroxide carbonate/polymer thin‐film hybrids that fully cover the substrate. These hybrids are converted into ZnO and retain their thin‐film morphologies. The resultant ZnO thin films exhibit a preferential crystallographic orientation that is attributed to the alignment of zinc hydroxide carbonate crystals before conversion. In addition, a photocatalytic function of the ZnO thin films has been demonstrated by analyzing the oxidation reaction of 2‐propanol. The biomineralization‐inspired approach reported herein is a promising way to develop ZnO materials with controlled morphologies and structures for photocatalytic applications.     

Covalent Photosensitizer–Polyoxometalate‐Catalyst Dyads for Visible‐Light‐Driven Hydrogen Evolution

A general concept for the covalent linkage of coordination compounds to bipyridine‐functionalized polyoxometalates is presented. The new route is used to link an iridium photosensitizer to an Anderson‐type hydrogen‐evolution catalyst. This covalent dyad catalyzes the visible‐light‐driven hydrogen evolution reaction (HER) and shows superior HER activity compared with the non‐covalent reference. Hydrogen evolution is observed over periods >1 week. Spectroscopic, photophysical, and electrochemical analyses give initial insight into the stability, electronic structure, and reactivity of the dyad. The results demonstrate that the proposed linkage concept allows synergistic covalent interactions between functional coordination compounds and reactive molecular metal oxides.     

Metal@COFs: Covalent Organic Frameworks as Templates for Pd Nanoparticles and Hydrogen Storage Properties of Pd@COF‐102 Hybrid Material

Three‐dimensional covalent organic frameworks (COFs) have been demonstrated as a new class of templates for nanoparticles. Photodecomposition of the [Pd(η³‐C₃H₅)(η⁵‐C₅H₅)]@COF‐102 inclusion compound (synthesized by a gas‐phase infiltration method) led to the formation of the Pd@COF‐102 hybrid material. Advanced electron microscopy techniques (including high‐angle annular dark‐field scanning transmission electron microscopy and electron tomography) along with other conventional characterization techniques unambiguously showed that highly monodisperse Pd nanoparticles ((2.4±0.5) nm) were evenly distributed inside the COF‐102 framework. The Pd@COF‐102 hybrid material is a rare example of a metal‐nanoparticle‐loaded porous crystalline material with a very narrow size distribution without any larger agglomerates even at high loadings (30 wt %). Two samples with moderate Pd content (3.5 and 9.5 wt %) were used to study the hydrogen storage properties of the metal‐decorated COF surface. The uptakes at room temperature from these samples were higher than those of similar systems such as Pd@metal–organic frameworks (MOFs). The studies show that the H₂ capacities were enhanced by a factor of 2–3 through Pd impregnation on COF‐102 at room temperature and 20 bar. This remarkable enhancement is not just due to Pd hydride formation and can be mainly ascribed to hydrogenation of residual organic compounds, such as bicyclopentadiene. The significantly higher reversible hydrogen storage capacity that comes from decomposed products of the employed organometallic Pd precursor suggests that this discovery may be relevant to the discussion of the spillover phenomenon in metal/MOFs and related systems.     

Hydrogels from Amorphous Calcium Carbonate and Polyacrylic Acid: Bio‐Inspired Materials for “Mineral Plastics”

Given increasing environmental issues due to the large usage of non‐biodegradable plastics based on petroleum, new plastic materials, which are economic, environmentally friendly, and recyclable are in high demand. One feasible strategy is the bio‐inspired synthesis of mineral‐based hybrid materials. Herein we report a facile route for an amorphous CaCO₃ (ACC)‐based hydrogel consisting of very small ACC nanoparticles physically cross‐linked by poly(acrylic acid). The hydrogel is shapeable, stretchable, and self‐healable. Upon drying, the hydrogel forms free‐standing, rigid, and transparent objects with remarkable mechanical performance. By swelling in water, the material can completely recover the initial hydrogel state. As a matrix, thermochromism can also be easily introduced. The present hybrid hydrogel may represent a new class of plastic materials, the “mineral plastics”.     

A 3D Aluminoborate Open Framework Interpenetrated by 2D Zinc–Amine Coordination‐Polymer Networks in Its 11‐Ring Channels

A new inorganic–organic hybrid solid, [Zn(dap)₂][AlB₅O₁₀], combining the structural features of 3D open‐framework inorganic solids and 2D metal–organic coordination polymers has been synthesized under solvothermal conditions. The compound displays extensive luminescence and moderate second‐harmonic‐generation efficiency.     

N‐Boc‐Histidine‐Capped PLGA‐PEG‐PLGA as a Smart Polymer for Drug Delivery Sensitive to Tumor Extracellular pH

A pH‐sensitive polymer was synthesized by introducing the N‐Boc‐histidine to the ends of a PLGA‐PEG‐PLGA block copolymer. The synthesized polymer was confirmed to be biodegradable and biocompatible, well dissolved in water and forming micelles above the CMC. DOX was employed as a model anticancer drug. In vitro drug release from micelles of N‐Boc‐histidine‐capped PLGA‐PEG‐PLGA exhibited significant difference between pH = 6.2 and pH = 7.4, whereas DOX release from micelles composed of un‐capped virgin polymers was not significantly sensitive to medium pH. Uptake of DOX from micelles of the new polymer into MDA‐MB‐435 solid tumor cells was also observed, and pH sensitivity was confirmed. Hence, the N‐Boc‐histidine capped PLGA‐PEG‐PLGA might be a promising material for tumor targeting.

     

A 3D Hybrid Praseodymium–Antimony–Oxochloride Compound: Single‐Crystal‐to‐Single‐Crystal Transformation and Photocatalytic Properties

A 3D organic–inorganic hybrid compound, (2‐MepyH)₃ [{Fe(1,10‐phen)₃}₃][{Pr₄Sb₁₂O₁₈(OH) Cl_11.5}(TDC)_4.5({Pr₄Sb₁₂O₁₈(OH)Cl_9.5} Cl)] ? 3 (2‐Mepy) ? 28 H₂O ( 1 ; 2‐Mepy=2‐methylpyridine, 1,10‐phen=1,10‐phenanthroline, H₂TDC=thiophene‐2,5‐dicarboxylic acid), was hydrothermally synthesized and structurally characterized. Unusually, two kinds of high‐nuclearity clusters, namely [(Pr₄Sb₁₂O₁₈ (OH)Cl₁₁)(COO)₅]^5? and [(Pr₄Sb₁₂O₁₈ (OH)Cl₉)Cl(COO)₅]^4?, coexist in the structure of compound 1 ; two of the latter clusters are doubly bridged by two μ₂‐Cl^? moieties to form a new centrosymmetric dimeric cluster. An unprecedented spontaneous and reversible single‐crystal‐to‐single‐crystal transformation was observed, which simultaneously involved a notable organic‐ligand movement between the metal ions and an alteration of the bridging ion in the dimeric cluster, induced by guest‐release/re‐adsorption, thereby giving rise to the interconversion between compound 1 and the compound (2‐MepyH)₃[{Fe(1,10‐phen)₃}₃][{Pr₄Sb₁₂O₁₈(OH)Cl_11.5}(TDC)₄({Pr₄Sb₁₂O₁₈Cl_10.5(TDC)_0.5(H₂O)_1.5}O_0.5)] ? 25 H₂O ( 1′ ). The mechanism of this transformation has also been discussed in great detail. Photocatalytic H₂‐evolution activity was observed for compound 1′ under UV light with Pt as a co‐catalyst and MeOH as a sacrificial electron donor.     

Chiral Gold Nanoparticles

Nanoparticle chirality has attracted much attention recently, and the application of chiral nanoparticles to chiral technologies (see figure) is also of interest. This Minireview deals with advances in the preparation and characterization of chiral gold nanoparticles. Origins of the chiroptical properties and potential applications are discussed.

     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.