Anchoring H3PW12O40 on aminopropylsilanized spinel‐type cobalt oxide (Co3O4‐SiPrNH2/H3PW12O40): A novel nanohybrid adsorbent for removing cationic organic dye pollutants from aqueous solutions

In this work, phosphotungstic acid (H₃PW₁₂O₄₀; PW₁₂) was chemically anchored on aminopropylsiloxane functionalized spherical Co₃O₄ nanoparticles (Co₃O₄–SiPrNH₂) and the resultant nanocomposite (Co₃O₄–SiPrNH₂/PW₁₂) was fully characterized. The results demonstrated successful anchoring of PW₁₂ on the surface of Co₃O₄–SiPrNH₂nanoparticles. The Co₃O₄–SiPrNH₂/PW₁₂ nanohybrid indicated a specific surface area of 42.14 m² g^?1, which was greater than that of pure PW₁₂ (ca. 5 m² g^?1). The adsorption efficiency of this novel adsorbent nanomaterial was evaluated for removing methylene blue (MB), rhodamine B (RhB) and methyl orange (MO) dyes from aqueous solutions. The hybrid nanomaterial exhibited a high adsorption rate and selective adsorptivity for the cationic MB and RhB dyes compared to those for anionic MO dye. The prepared hybrid nanomaterial removed over 98% of MB within 12 min. The effects of initial pH, contact time, adsorbent dosage, and temperature were investigated on the adsorption process. The adsorption capacity of nanohybrid for cationic MB dye was 38.46 mg g^‐1. Also, adsorption kinetics indicated that the adsorption by Co₃O₄–SiPrNH₂/PW₁₂ was well‐modeled using pseudo‐second‐order kinetic model. Finally, thermodynamic parameters revealed that the adsorption was endothermic and spontaneous. The adsorption rate and ability of the Co₃O₄–SiPrNH₂/PW₁₂ were enhanced as compared with Co₃O₄ and Co₃O₄–SiPrNH₂ samples due to enhanced electrostatic attraction intraction. The nanohybride was easily separated and reused without any change in structure. Thus, it could be a promising green adsorbent for removing organic pollutants in water.     

Mechanism of the Cycloaddition of Carbon Dioxide and Epoxides Catalyzed by Cobalt‐Substituted 12‐Tungstenphosphate

Co^II‐substituted α‐Keggin‐type 12‐tungstenphosphate [(n‐ C₄H₉)₄N]₄H[PW₁₁Co(H₂O)O₃₉]‐ (PW₁₁Co) is synthesized and used as a single‐component, solvent‐free catalyst in the cycloaddition reaction of CO₂ and epoxides to form cyclic carbonates. The mechanism of the cycloaddition reaction is investigated using DFT calculations, which provides the first computational study of the catalytic cycle of polyoxometalate‐catalyzed CO₂ coupling reactions. The reaction occurs through a single‐electron transfer from the doublet Co^II catalyst to the epoxide and forms a doublet Co^III–carbon radical intermediate. Subsequent CO₂ addition forms the cyclic carbonate product. The existence of radical intermediates is supported by free‐radical termination experiments. Finally, it is exhilarating to observe that the calculated overall reaction barrier (30.5 kcal mol^?1) is in good agreement with the real reaction rate (83 h^?1) determined in the present experiments (at 150 °C).     

Compositing Amorphous TiO2 with N‐Doped Carbon as High‐Rate Anode Materials for Lithium‐Ion Batteries

Compositing amorphous TiO₂ with nitrogen‐doped carbon through Ti? N bonding to form an amorphous TiO₂/N‐doped carbon hybrid (denoted a‐TiO₂/C? N) has been achieved by a two‐step hydrothermal–calcining method with hydrazine hydrate as an inhibitor and nitrogen source. The resultant a‐TiO₂/C? N hybrid has a surface area as high as 108 m² g^?1 and, when used as an anode material, exhibits a capacity as high as 290.0 mA h g^?1 at a current rate of 1 C and a reversible capacity over 156 mA h g^?1 at a current rate of 10 C after 100 cycles; these results are better than those found in most reports on crystalline TiO₂. This superior electrochemical performance could be ascribed to a combined effect of several factors, including the amorphous nature, porous structure, high surface area, and N‐doped carbon.     

Preparation and Photocatalytic Activity of Mesoporous TiO2 Photocatalyst Co‐doped with Fe and H3PW12O40

The mesoporous titanium dioxide (MTiO₂) photocatalysts co‐doped with Fe and H₃PW₁₂O₄₀ were synthesized by template method using tetrabutyl titanate (Ti(OC₄H₉)₄), Fe(NO₃)k₃9H₂Oand H₃PW₁₂O₄₀ as precursors and Pluronic P123 as template. The as‐prepared photocatalyst was characterized by N₂ adsorption‐desorption measurements, X‐ray diffraction (XRD), scanning electron microscopy (SEM) and UV‐vis adsorption spectroscopy, and the photocatalytic activities of the prepared samples under UV and visible light were estimated by measuring the degradation rate of methyl blue (MB) (50 mg/L) in an aqueous solution. The characterizations indicated that the photocatalysts possessed a homogeneous pore diameter of ca. 10 nm with high surface area of ca. 150 m²/g. The results of MB photodecomposition showed that co‐doped mesoporous TiO₂ exhibited higher photocatalytic activities than un‐doped, single‐doped mesoporous TiO₂ under UV and visible light irradiation. It was shown that the co‐doped MTiO₂ could be activated by visible light and could thus be used as an effective catalyst in photo‐oxidation reactions. The synergistic effect of Fe and H₃PW₁₂O₄₀ co‐doping played an important role in improving the photocatalytic activity.     

Selective Conversion of Cellobiose and Cellulose into Gluconic Acid in Water in the Presence of Oxygen,Catalyzed by Polyoxometalate‐Supported Gold Nanoparticles

Gold nanoparticles loaded onto Keggin‐type insoluble polyoxometalates (Cs_xH_3?xPW₁₂O₄₀) showed superior catalytic performances for the direct conversion of cellobiose into gluconic acid in water in the presence of O₂. The selectivity of Au/Cs_xH_3?xPW₁₂O₄₀ for gluconic acid was significantly higher than those of Au catalysts loaded onto typical metal oxides (e.g., SiO₂, Al₂O₃, and TiO₂), carbon nanotubes, and zeolites (H‐ZSM‐5 and HY). The acidity of polyoxometalates and the mean‐size of the Au nanoparticles were the key factors in the catalytic conversion of cellobiose into gluconic acid. The stronger acidity of polyoxometalates not only favored the conversion of cellobiose but also resulted in higher selectivity of gluconic acid by facilitating desorption and inhibiting its further degradation. On the other hand, the smaller Au nanoparticles accelerated the oxidation of glucose (an intermediate) into gluconic acid, thereby leading to increases both in the conversion of cellobiose and in the selectivity of gluconic acid. The Au/Cs_xH_3?xPW₁₂O₄₀ system also catalyzed the conversion of cellulose into gluconic acid with good efficiency, but it could not be used repeatedly owing to the leaching of a H⁺‐rich hydrophilic moiety over long‐term hydrothermal reactions. We have demonstrated that the combination of H₃PW₁₂O₄₀ and Au/Cs_3.0PW₁₂O₄₀ afforded excellent yields of gluconic acid (about 85 %, 418 K, 11 h), and the deactivation of the recovered H₃PW₁₂O₄₀–Au/Cs_3.0PW₁₂O₄₀ catalyst was not serious during repeated use.     

Carbon‐Dot‐Sensitized,Nitrogen‐Doped TiO2 in Mesoporous Silica for Water Decontamination through Nonhydrophobic Enrichment–Degradation Mode

Mesoporous silica synthesized from the cocondensation of tetraethoxysilane and silylated carbon dots containing an amide group has been adopted as the carrier for the in situ growth of TiO₂ through an impregnation–hydrothermal crystallization process. Benefitting from initial complexation between the titania precursor and carbon dot, highly dispersed anatase TiO₂ nanoparticles can be formed inside the mesoporous channel. The hybrid material possesses an ordered hexagonal mesostructure with p6mm symmetry, a high specific surface area (446.27 m² g^?1), large pore volume (0.57 cm³ g^?1), uniform pore size (5.11 nm), and a wide absorption band between λ=300 and 550 nm. TiO₂ nanocrystals are anchored to the carbon dot through Ti?O?N and Ti?O?C bonds, as revealed by X‐ray photoelectron spectroscopy. Moreover, the nitrogen doping of TiO₂ is also verified by the formation of the Ti?N bond. This composite shows excellent adsorption capabilities for 2,4‐dichlorophenol and acid orange 7, with an electron‐deficient aromatic ring, through electron donor–acceptor interactions between the carbon dot and organic compounds instead of the hydrophobic effect, as analyzed by the contact angle analysis. The composite can be photocatalytically recycled through visible‐light irradiation after adsorption. The narrowed band gap, as a result of nitrogen doping, and the photosensitization effect of carbon dots are revealed to be coresponsible for the visible‐light activity of TiO₂. The adsorption capacity does not suffer any clear losses after being recycled three times.     

Preparation of disk‐like Pt/CeO2‐p‐TiO2 catalyst derived from MIL‐125(Ti) for excellent catalytic performance

A feasible strategy is reported for the synthesis of a disk‐like Pt/CeO₂‐p‐TiO₂ catalyst derived from the titanium‐based metal–organic framework (MOF) MIL‐125(Ti) through a few valid steps. To verify the successful synthesis and structural features of the Pt/CeO₂‐p‐TiO₂ catalyst, as‐prepared samples were characterized using several techniques. The characterizations demonstrated that MOF‐derived porous TiO₂ was appropriate for application as a support owing to its moderate surface area (101 m² g^?1) and suitable pore size (6 nm). Moreover, to study the effect of calcination temperature on the catalytic performance, the obtained catalyst was calcined at various temperatures. It was found that Pt/CeO₂‐p‐TiO₂ calcined at 550 °C exhibited the highest catalytic performance, evaluated by means of the reduction of 4‐nitrophenol monitored by UV–visible spectra. Furthermore, this catalyst showed good reusability with a conversion of 94% even after six cycles. Finally, a possible reaction mechanism was proposed to explain the reduction of 4‐nitrophenol to 4‐aminophenol over the Pt/CeO₂‐p‐TiO₂ catalyst.     

Synthesis of polyethylene‐octene elastomer/SiO2‐TiO2 nanocomposites via in situ polymerization: Properties and characterization of the hybrid

In this study, a silicic acid and tetra isopropyl ortho titanate ceramic precursor and a metallocene polyethylene‐octene elastomer (POE) or acrylic acid grafted metallocene polyethylene‐octene elastomer (POE‐g‐AA) were used in the preparation of hybrids (POE/SiO₂? TiO₂ and POE‐g‐AA/SiO₂? TiO₂) using an in situ sol‐gel process, with a view to identifying a hybrid with improved thermal and mechanical properties. Hybrids were characterized using Fourier transform infrared spectroscopy, ²⁹Si solid‐state nuclear magnetic resonance (NMR), X‐ray diffraction, differential scanning calorimetry, thermogravimetry analysis, dynamic mechanical thermal analysis, and Instron mechanical testing. Properties of the POE‐g‐AA/SiO₂? TiO₂ hybrid were superior to those of the POE/SiO₂? TiO₂ hybrid. This was because the carboxylic acid groups of acrylic acid acted as coordination sites for the silica‐titania phase to allow the formation of stronger chemical bonds. ²⁹Si solid‐state NMR showed that Si atoms coordinated around SiO₄ units were predominantly Q₃ and Q₄. The 10 wt % SiO₂? TiO₂ hybrids gave the maximum values of tensile strength and glass transition temperature in both POE/SiO₂? TiO₂ and POE‐g‐AA/SiO₂? TiO₂. It is proposed that above this wt %, excess SiO₂? TiO₂ particles caused separation between the organic and inorganic phases. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1690–1701, 2005     

Organic–inorganic hybrid membranes prepared from the sol–gel process of poly(butyleneadipate‐co‐terephthalate) and TiO2

Organic–inorganic hybrids based on poly(butyleneadipate‐co‐terephthalate)/titanium dioxide (PBAT/TiO₂) hybrid membranes were prepared via a sol–gel process. The PBAT/TiO₂ hybrid membranes were prepared for various PBAT/TiO₂ ratios. The resulting hybrids were characterized with a morphological structure, hydrophilicity, biodegradability, and thermal properties. The results showed that macrovoids underwent a transition into a sponge‐like membrane structure with the addition of TiO₂. After sol–gel transition, a strong interaction between the inorganic network and polymeric chains led to an increase in glass transition temperature (T_g), thermal degrading temperature, and hydrophilicity, and hence a higher biodegradability. According to X‐ray diffraction measurements of the crystal structure of the hybrid, the presence of TiO₂ did not change the crystal structure of PBAT. TiO₂ networks are uniformly dispersed into the PBAT matrix and no aggregation of TiO₂ networks in the hybrid membranes was observed through the small angle X‐ray scattering measurements. Thus, the sol–gel process of PBAT and TiO₂ can be used to prepare a hybrid with higher application temperature and faster biodegradation rate. Copyright © 2008 John Wiley & Sons, Ltd.     

Structurally Stabilized Organosilane‐Templated Thermostable Mesoporous Titania

Structurally thermostable mesoporous anatase TiO₂ (m‐TiO₂) nanoparticles, uniquely decorated with atomically dispersed SiO₂, is reported for the first time. The inorganic Si portion of the novel organosilane template, used as a mesopores‐directing agent, is found to be incorporated in the pore walls of the titania aggregates, mainly as isolated sites. This is evident by transmission electron microscopy and high‐angle annular dark field scanning transmission electron microscopy, combined with electron dispersive X‐ray spectroscopy. This type of unique structure provides exceptional stability to this new material against thermal collapse of the mesoporous structure, which is reflected in its high surface area (the highest known for anatase titania), even after high‐temperature (550 °C) calcination. Control of crystallite size, pore diameter, and surface area is achieved by varying the molar ratios of the titanium precursor and the template during synthesis. These mesoporous materials retain their porosity and high surface area after template removal and further NaOH/HCl treatment to remove silica. We investigate their performance for dye‐sensitized solar cells (DSSCs) with bilayer TiO₂ electrodes, which are prepared by applying a coating of m‐TiO₂ onto a commercial titania (P25) film. The high surface area of the upper mesoporous layer in the P25–m‐TiO₂ DSSC significantly increases the dye loading ability of the photoanode. The photocurrent and fill factor for the DSSC with the bilayer TiO₂ electrode are greatly improved. The large increase in photocurrent current (ca. 56 %) in the P25–m‐TiO₂ DSSC is believed to play a significant role in achieving a remarkable increase in the photovoltaic efficiency (60 %) of the device, compared to DSSCs with a monolayer of P25 as the electrode.     

Fullerol–Titania Charge‐Transfer‐Mediated Photocatalysis Working under Visible Light

The development of visible‐light‐active photocatalysts is being investigated through various approaches. In this study, C₆₀‐based sensitized photocatalysis that works through the charge transfer (CT) mechanism is proposed and tested as a new approach. By employing the water‐soluble fullerol (C₆₀(OH)_x) instead of C₆₀, we demonstrate that the adsorbed fullerol activates TiO₂ under visible‐light irradiation through the “surface–complex CT” mechanism, which is largely absent in the C₆₀/TiO₂ system. Although fullerene and its derivatives have often been utilized in TiO₂‐based photochemical conversion systems as an electron transfer relay, their successful photocatalytic application as a visible‐light sensitizer of TiO₂ is not well established. Fullerol/TiO₂ exhibits marked visible photocatalytic activity not only for the redox conversion of 4‐chlorophenol, I^?, and Cr^VI, but also for H₂ production. The photoelectrode of fullerol/TiO₂ also generates an enhanced anodic photocurrent under visible light as compared with the electrodes of bare TiO₂ and C₆₀/TiO₂, which confirms that the visible‐light‐induced electron transfer from fullerol to TiO₂ is particularly enhanced. The surface complexation of fullerol/TiO₂ induced a visible absorption band around 400–500 nm, which was extinguished when the adsorption of fullerol was inhibited by fluorination of the surface of TiO₂. The transient absorption spectroscopic measurement gave an absorption spectrum ascribed to fullerol radical cations (fullerol^.+) the generation of which should be accompanied by the proposed CT. The theoretical calculation regarding the absorption spectra for the (TiO₂ cluster+fullerol) model also confirmed the proposed CT, which involves excitation from HOMO (fullerol) to LUMO (TiO₂ cluster) as the origin of the visible‐light absorption.     

Effects of Dye‐Adsorption Solvent on the Performances of the Dye‐Sensitized Solar Cells Based on Black Dye

The effects of the dye‐adsorption solvent on the performances of the dye‐sensitized solar cells (DSSCs) based on black dye have been investigated. The highest conversion efficiency (10.6 %) was obtained in the cases for which 1‐PrOH and the mixed solvent of EtOH and tBuOH (3:1 v/v) were employed as dye‐adsorption solvents. The optimized value for the dielectric constant of the dye‐adsorption solvent was found to be around 20. The DSSCs that used MeOH as a dye‐adsorption solvent showed inferior solar‐cell performance relative to the DSSCs that used EtOH, 1‐PrOH, 2‐PrOH, and 1‐BuOH. Photo‐ and electrochemical measurements of black dye both in solution and adsorbed onto the TiO₂ surface revealed that black dye aggregates at the TiO₂ surface during the adsorption process in the case for MeOH. Both the shorter electron lifetime in the TiO₂ photoelectrode and the greater resistance in the TiO₂–dye–elecrolyte interface, attributed to the dye aggregation at the TiO₂ surface, cause the decrease in the solar‐cell performance of the DSSC that used MeOH as a dye adsorption solvent.     

Widely Controllable Syngas Production by a Dye‐Sensitized TiO2 Hybrid System with ReI and CoIII Catalysts under Visible‐Light Irradiation

Visible‐light irradiation of a ternary hybrid catalyst prepared by grafting a dye, an H₂ evolving Co^III catalyst and a CO‐producing Re^I catalyst on TiO₂ have been found to produce both H₂ and CO (syngas) in CO₂‐saturated N ,N ‐dimethyl formamide (DMF)/water solution containing a 0.1 m sacrificial electron donor. The H₂/CO ratios are effectively controlled by changing either the water content of the solvent or the molar ratio of the Re^I and Co^III catalysts ranging from 1:2 to 15:1. The controlled syngas formation is discussed in terms of competitive electron flow from TiO₂ to each of the CO₂‐reduction and hydrogen‐evolving sites depending on the efficiencies of the two catalytic reaction cycles under given reaction conditions.     

Electrocatalytic Reduction of Nitrite by Phosphotungstic Heteropolyanion. Application for Its Simple and Selective Determination

Three couples of reversible redox peaks of the PW₁₂O₄₀^3? (PW₁₂) anion, which are composed of two one‐electron and one two‐electron processes occur in the potential range from +0.25 to ?0.7 V in aqueous solutions. The electrocatalytic reduction of nitrite has been studied by the first redox couple of the PW₁₂ anion at the surface of a carbon paste electrode. Cyclic voltammetric and chronoamperometric techniques were used to investigate the suitability of PW₁₂ anion as a mediator for nitrite electrocatalytic reduction in aqueous solution with strongly acidic concentration of H₂SO₄. Results showed that H₂SO₄ 1.00 M is the best medium for this purpose. In the optimum concentration of H₂SO₄, the electrocatalytic ability about 500 mV can be seen and the homogeneous second‐order rate constant (k_s) for nitrite coupled catalytically to PW₁₂ anion was calculated as 2.52×10³ M^?1 s^?1 using the Nicholson–Shain method. According to our voltammetric experiments, the catalytic reduction peak current was linearly dependent on the nitrite concentration and the linearity range obtained was 3×10^?5 to 1.00×10^?3 M. The detection limit has been found to be 2.82×10^?5 M (2σ). This method has been applied as a selective, simple, and precise method for determination of nitrite in real samples.     

One‐pot synthesis of a new high vinyl content hybrid silica monolith dedicated to nanoliquid chromatography

A new vinyltrimethoxysilane‐based hybrid silica monolith was developed and used as a reversed‐phase capillary column. The synthesis of this rich vinyl hybrid macroporous monolith, by cocondensation of vinyltrimethoxysilane with tetramethoxysilane, was investigated using an unconventional (formamide, nitric acid) porogen/catalyst system. A macroporous hybrid silica monolith with 80% in mass of vinyltrimethoxysilane in the feeding silane solution was obtained and compared to a more conventional low vinyl content hybrid monolith with only of 20% vinyltrimethoxysilane. Monoliths were characterized by scanning electron microscopy, ²⁹Si nuclear magnetic resonance spectroscopy and N₂ adsorption–desorption. About 80% of the vinyl precursor was incorporated in the final materials, leading to 15.9 and 61.5% of Si atoms bonded to vinyl groups for 20% vinyltrimethoxysilane and 80% vinyltrimethoxysilane, respectively. The 80% vinyltrimethoxysilane monolith presents a lower surface area than 20% vinyltrimethoxysilane (159 versus 551 m²/g), which is nevertheless compensated by a higher vinyl surface density. Chromatographic properties were evaluated in reversed‐phase mode. Plots of ln(k) versus percentage of organic modifier were used to assess the reversed‐phase mechanism. Its high content of organic groups leads to high retention properties. Column efficiencies of 170 000 plates/m were measured for this 80% vinyltrimethoxysilane hybrid silica monolith. Long capillary monolithic columns (90 cm) were successfully synthesized (N = 120 000).     

Oxygen‐Controlled Catalysis by Vitamin B12‐TiO2: Formation of Esters and Amides from Trichlorinated Organic Compounds by Photoirradiation

An oxygen switch in catalysis of the cobalamin derivative (B₁₂)‐TiO₂ hybrid catalyst for the dechlorination of trichlorinated organic compounds has been developed. The covalently bound B₁₂ on the TiO₂ surface transformed trichlorinated organic compounds into an ester and amide by UV light irradiation under mild conditions (in air at room temperature), while dichlorostilbenes (E and Z forms) were formed in nitrogen from benzotrichloride. A benzoyl chloride was formed as an intermediate of the ester and amide, which was detected by GC‐MS. The substrate scope of the synthetic strategy is demonstrated with a range of various trichlorinated organic compounds. A photo‐duet reaction utilizing the hole and conduction band electron of TiO₂ in B₁₂‐TiO₂ for the amide formation was also developed.     

A Novel Inorganic-Organic Composite Constructed from Cobalt（Ⅱ）-Monosubstituted Polyoxometalates and Poly（amidoamine）-NH2 DendrimersA Novel Inorganic-Organic Composite Constructed from Cobalt（Ⅱ）-Monosubstituted Polyoxometalates and Poly（amidoamine）-NH2 Dendrimers

An inorganic-organic composite was prepared by poly（amidoamine） （PAMAM） dendrimer reacting with cobalt（Ⅱ）-monosubstituted polyoxometalates Na5Co^Ⅱ（H2O）PW11O39 （PW11CO） in an aqueous solution. The hybrid composite PW11Co/PAMAM was characterized by FT-IR, UV-Vis diffuse reflectance spectra （DR-UV-Vis）, XPS, XRD and TG/DTA, indicating that the PWI iCo was chemically anchored to PAMAM. The morphologies of the title composite were characterized by scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The catalytic activity was evaluated by oxidation of isobutyraldehyde （IBA） to isobutyric acid （IBAc） in MeCN under mild conditions （20 ℃, ambient pressure）, showing that the title compound is a more effective and recoverable catalyst than corresponding PW11Co.     

Boehmite nano‐particles functionalized with silylpropylamine‐supported Keggin‐type heteropolyacids: Catalysts for epoxidation of alkenes

Boehmite nano‐particles with a high degree of surface hydroxyl groups were covalently functionalized by 3‐(trimethoxysilyl)‐propylamine to support H₃[PMo₁₂O₄₀], H₃[PW₁₂O₄₀], H₄[SiMo₁₂O₄₀] and H₄[SiW₁₂O₄₀] Keggin‐type heteropolyacids. After characterization of these catalysts by FT‐IR, powder X‐ray diffraction, TG/differential thermal analysis, CHN, inductively coupled plasma and transmission electron microscopy techniques, they were applied to the epoxidation of cis‐cycloocten. The progress of the reactions was investigated by gas–liquid chromatography, and the catalytic procedures were optimized for the parameters involved, such as the solvent and oxidant. The results showed that 25 mg of supported H₃[PMo₁₂O₄₀] catalyst in 1 ml C₂H₄Cl₂ with 0.5 mmol cyclooctene and 1 mmol tert‐butylhydroperoxide at reflux temperature gave 98% yield over 15 min. Recycling experiments revealed that these nanocatalysts could be repeatedly applied up to five times for a nearly complete epoxidation of cis‐cycloocten. The optimized experimental conditions were also used successfully for the epoxidation of some other alkenes, such as cyclohexene, styrene and α‐methyl styrene.     

Comparison between various Keggin and Wells–Dawson sandwich‐type polyoxometalates in catalytic oxidation of cyclooctene and cyclohexene with hydrogen peroxide

The catalytic performance of tetra‐n‐butylammonium salts of Keggin and Wells–Dawson sandwich‐type polyoxotungstates, [M₄(PW₉O₃₄)₂]^m? and [M₄(P₂W₁₅O₅₆)₂]^n? (M = Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Zn²⁺), in the oxidation of cyclooctene and cyclohexene with 30% hydrogen peroxide under various conditions was investigated. In comparison, Wells–Dawson sandwich‐type polyoxometalates were found to be less active than Keggin ones. In both of them, those containing Zn and Fe gave higher conversions for different oxidation conditions. These catalysts showed very good reusability in the oxidation reaction. Copyright © 2014 John Wiley & Sons, Ltd.     

Two novel organic–inorganic hybrid materials from tetrachloridometallate(II) salts and 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium

Two organic–inorganic hybrid compounds have been prepared by the combination of the 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium cation with perhalometallate anions to give 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium tetrachloridocobaltate(II), (C₁₂H₁₂N₂)[CoCl₄], (I), and 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium tetrachloridozincate(II), (C₁₂H₁₂N₂)[ZnCl₄], (II). The compounds have been structurally characterized by single‐crystal X‐ray diffraction analysis, showing the formation of a three‐dimensional network through X—H...Cl_nM⁻ (X = C, N⁺; n = 1, 2; M = Co^II, Zn^II) hydrogen‐bonding interactions and π–π stacking interactions. The title compounds were also characterized by FT–IR spectroscopy and thermogravimetric analysis (TGA).